When outlining a phi node, if the the incoming branch is a block contained in the region and the branch from that block is not outlined, we create broken code. The fix is to recognize when that branch from the included incoming block is not contained, and ignore the region.
Reviewer: paquette
Differential Revision: https://reviews.llvm.org/D121311
Since the IROutliner is performing an optimization, it should not outline from functions explicitly marked with optnone. This adds an extra check and test to make sure this does not occur.
Reviewers: paquette
Differential Revision: https://reviews.llvm.org/D121567
When matching PHINodes when margining functions the IROutliner only checks that an incoming value exists in phi node in overall function. It doesn't check the length, the order, or that the incoming block also matches. In the given example, we see that both phi nodes have the same incoming values, but from different blocks.
The fix is to to enforce stricter a match of the incoming value, and the incoming block as well when matching the created phi nodes.
Reviewers: paquette
Differential Revision: https://reviews.llvm.org/D121310
The IR Outliner is supposed to extract the outputs contained in an external phi node and place them into a phi node contained within the outlined function. However, when the output values of two outlined functions with two different output sets are contained within the same phi node, they are counted as the same exit path when first analyzed. In reality, these create two different phi nodes, creating an inconsistency, resulting in a mismatch in the expected number of output paths and a crash. This fixes that counting when analyzing the outputs by also analyzing the incoming blocks rather than just the incoming values.
Reviewer: paquette
Differential Revision: https://reviews.llvm.org/D121313
When there are two external phi nodes for two different outlined regions, when compressing the created phi nodes between the two regions, the matching for the second phi node in the second region matches the first phi node created for the first region rather than the second phi node created for the first region. This adds an extra output path where there should not be one.
The fix is the ignore phi nodes that have already been matched for each region.
Reviewer: paquette
Differential Revision: https://reviews.llvm.org/D121312
If an instruction is first legal instruction in the module, and is the only legal instruction in its basic block, it will be ignored by the outliner due to a length check inherited from the older version of the outliner that was restricted to outlining within a single basic block. This removes that check, and updates any tests that broke because of it.
Reviewer: paquette
Differential Revision: https://reviews.llvm.org/D120786
Musttail calls require extra handling to properly propagate the calling convention information and tail call information. The outliner does not currently do this, so we ignore call instructions that utilize the swifttailcc and tailcc calling convention as well as functions marked with the attribute musttail.
Reviewers: paquette, aschwaighofer
Differential Revision: https://reviews.llvm.org/D120733
As a result of adding multiblock outlining, it became possible to outline the entirety of basic block, and branches that only pointed to the basic blocks contained in the outlined section. This means that there are no exit paths, and no return statement. There was a previous assertion from the older version of the outliner that explicitly made sure there was a return statement. This removes that assertion.
Reviewers: paquette
Differential Revision: https://reviews.llvm.org/D120868
Due to some complications with lifetime, and assume-like intrinsics, intrinsics were not included as outlinable instructions. This patch opens up most intrinsics, excluding lifetime and assume-like intrinsics, to be outlined. For similarity, it is required that the intrinsic IDs, and the intrinsics names match exactly, as well as the function type. This puts intrinsics in a different class than normal call instructions (https://reviews.llvm.org/D109448), where the name will no longer have to match.
This also adds an additional command line flag debug option to disable outlining intrinsics.
Recommit of: 8de76bd569732acae6a10fdcb0152a49f7d4cd39
Adds extra checking of intrinsic function calls names to avoid taking the address of intrinsic calls when extracting function calls.
Reviewers: paquette, jroelofs
Differential Revision: https://reviews.llvm.org/D109450
We use the same similarity scheme we used for branch instructions for phi nodes, and allow them to be outlined. There is not a lot of special handling needed for these phi nodes when outlining, as they simply act as outputs. The code extractor does not currently allow for non entry blocks within the extracted region to have predecessors, so there are not conflicts to handle with respect to predecessors no longer contained in the function.
Recommit of 515eec3553b02533e9a88ee84bc245d5415163da
Reviewers: paquette
Differential Revision: https://reviews.llvm.org/D106997
Due to some complications with lifetime, and assume-like intrinsics, intrinsics were not included as outlinable instructions. This patch opens up most intrinsics, excluding lifetime and assume-like intrinsics, to be outlined. For similarity, it is required that the intrinsic IDs, and the intrinsics names match exactly, as well as the function type. This puts intrinsics in a different class than normal call instructions (https://reviews.llvm.org/D109448), where the name will no longer have to match.
This also adds an additional command line flag debug option to disable outlining intrinsics.
Reviewers: paquette, jroelofs
Differential Revision: https://reviews.llvm.org/D109450
The outliner currently requires that function calls not be indirect calls, and have that the function name, and function type must match, as well as other attributes such as calling conventions. This patch treats called functions as values, and just another operand, and named function calls as constants. This allows functions to be treated like any other constant, or input and output into the outlined functions.
There are also debugging flags added to enforce the old behaviors where indirect calls not be allowed, and to enforce the old rule that function calls names must also match.
Reviewers: paquette, jroelofs
Differential Revision: https://reviews.llvm.org/D109448
Functions that return twice can cause the IR Outliner to miscompile the given program. These function rely on information about the stack to be the same, and this may not necessarily be the case if called from an outlined function. So, we simply call these instructions illegal for the outliner to remove.
Reviewers: paquette
Differential Revision: https://reviews.llvm.org/D110007
In addition to having multiple exit locations, there can be multiple blocks leading to the same exit location, which results in a potential phi node. If we find that multiple blocks within the region branch to the same block outside the region, resulting in a phi node, the code extractor pulls this phi node into the function and uses it as an output.
We make sure that this phi node is given an output slot, and that the two values are removed from the outputs if they are not used anywhere else outside of the region. Across the extracted regions, the phi nodes are combined into a single block for each potential output block, similar to the previous patch.
Reviewers: paquette
Differential Revision: https://reviews.llvm.org/D106995
In D115311, we're looking to modify clang to emit i constraints rather
than X constraints for callbr's indirect destinations. Prior to doing
so, update all of the existing tests in llvm/ to match.
Reviewed By: void, jyknight
Differential Revision: https://reviews.llvm.org/D115410
When we start outlining across branches, there is the possibility that we will have two different blocks with different output locations, or a single branch that goes to two blocks outside of the region that is being outlined. While the CodeExtractor provides most of the mechanisms by using the return value of the extracted function as the input to a switch statement to correctly branch to the correct location, we need special handling for different output schemas to each location.
This is done by repeating the existing storing scheme for each different exit block. We have a map from the return values used, to the basic block that is used to store the outputs for that particular exit block within the outlined function. Then if needed, we create a switch statement for each return block to branch to the correct set of stored outputs.
Reviewers: paquette
Differential Revision: https://reviews.llvm.org/D106993
Using the similarity found from the IRSimilarity Identifier, we take regions with structural similarity, and deduplicate them into a separate function. The Code Extractor is able to provide most of this functionality.
For simplicity, we start by only outlining regions with a single entry and single exit branch, this reduces the complexity in handling phi nodes outside the region, and handling many sets of outputs for each of the different exit blocks.
Reviewer: paquette
Differential Revision: https://reviews.llvm.org/D106990
The current IRSimilarityIdentifier does not try to find similarity across blocks, this patch provides a mechanism to compare two branches against one another, to find similarity across basic blocks, rather than just within them.
This adds a step in the similarity identification process that labels all of the basic blocks so that we can identify the relative branching locations. Within an IRSimilarityCandidate we use these relative locations to determine whether if the branching to other relative locations in the same region is the same between branches. If they are, we consider them similar.
We do not consider the relative location of the branch if the target branch is outside of the region. In this case, both branches must exit to a location outside the region, but the exact relative location does not matter.
Reviewers: paquette, yroux
Differential Revision: https://reviews.llvm.org/D106989
Currently, the IROutliner uses a simple metric to outline the largest amount
of IR possible to outline first if it fits the cost model. This is model
loses out on smaller blocks of code that have higher reductions in cost that
are contained within larger blocks of IR.
This reverses the order, where we calculate all of the costs first, and then
reorder and extract items based on the calculated results.
Reviewers: paquette
Differential Revision: https://reviews.llvm.org/D106440
Occasionally instructions are between the last instruction in a region,
and the following instruction as identified by the Candidate. This
adds an extra check right before splitting a candidate that excludes the region from being split/checked for outlining to remove errors.
Tests Added:
Tranforms/IROuutliner/outlining-extra-bitcasts.ll
Reviewer: paquette, jroelofs
Differential Revision: https://reviews.llvm.org/D104142
When the initial relationship between two pairs of values between
similar sections is ambiguous to commutativity, arguments to the
outlined functions can be passed in such that the order is incorrect,
causing miscompilations. This adds a canonical mapping to each
similarity section, so that we can maintain the relationship of global
value numbering from one section to another.
Added Tests:
Transforms/IROutliner/outlining-commutative-operands-opposite-order.ll
unittests/Analysis/IRSimilarityIdentifierTest.cpp - IRSimilarityCandidate:CanonicalNumbering
Reviewers: jroelofs, jpaquette, yroux
Differential Revision: https://reviews.llvm.org/D104143
This adds support for functions outlined by the IR Outliner to be
recognized by the debugger. The expected behavior is that it will
skip over the instructions included in that section. This is due to the
fact that we can not say which of the original locations the
instructions originated from.
These functions will show up in the call stack, but you cannot step
through them.
Reviewers: paquette, vsk, djtodoro
Differential Revision: https://reviews.llvm.org/D87302
Since d6de1e1a71406c75a4ea4d5a2fe84289f07ea3a1, no attributes is quivalent to
setting attribute to false.
This is a preliminary commit for https://reviews.llvm.org/D99080
In commit 700d2417d8281ea56dfd7ac72d1a1473d03d2d59 the CodeExtractor
was updated so that bitcasts that have lifetime markers that beginning
outside of the region are deduplicated outside the region and are not
used as an output. This caused a discrepancy in the IROutliner, where
in these cases there were arguments added to the aggregate function
that were not needed causing assertion errors.
The IROutliner queries the CodeExtractor twice to determine the inputs
and outputs, before and after `findAllocas` is called with the same
ValueSet for the outputs causing the duplication. This has been fixed
with a dummy ValueSet for the first call.
However, the additional bitcasts prevent us from using the same
similarity relationships that were previously defined by the
IR Similarity Analysis Pass. In these cases, we check whether the
initial version of the region being analyzed for outlining is still the
same as it was previously. If it is not, i.e. because of the additional
bitcast instructions from the CodeExtractor, we discard the region.
Reviewers: yroux
Differential Revision: https://reviews.llvm.org/D94303
We add an extra check to make sure that we do not outline calls to
indirect functions, but outline whatever the IRSimilarityIdentifier
finds with respect to calls.
Tests:
Removing test/Transforms/IROutliner/illegal-calls.ll
Adding test/Transforms/IROutliner/outlining-calls.ll
Adding test/Transforms/IROutliner/illegal-indirect-calls.ll
Excluding DebugInfo this is the last patch for the initial
implementation of the IROutliner!
Reviewers: jroelofs, paquette
Differential Revision: https://reviews.llvm.org/D87314
Here we let non-intrinsic calls be considered legal and valid for
similarity only if the call is not indirect, and has a name.
For two calls to be considered similar, they must have the same name,
the same function types, and the same set of parameters, including tail
calls and calling conventions.
Tests are found in unittests/Analysis/IRSimilarityIdentifierTest.cpp.
Reviewers: jroelofs, paquette
Differential Revision: https://reviews.llvm.org/D87312
We outline what the IRSimilarityIdentifier deems GEP Instructions to be
similar. In this case, the types must be the same, and the operand
values after the first indexing operand must be the exact same.
Tests:
Removing test/Transforms/IROutliner/illegal-gep.ll
Adding test/Transforms/IROutliner/outlining-gep.ll
Reviewers: jroelofs, paquette
Differential Revision: https://reviews.llvm.org/D87317
GetElementPtr instructions require the extra check that all operands
after the first must only be constants and be exactly the same to be
considered similar.
Tests are found in unittests/Analysis/IRSimilarityIdentifierTest.cpp.
When combining extracted functions, they may have different function
attributes. We want to make sure that we do not make any assumptions,
or lose any information. This attempts to make sure that we consolidate
function attributes to their most general case.
Tests:
llvm/test/Transforms/IROutliner/outlining-compatible-and-attribute-transfer.ll
llvm/test/Transforms/IROutliner/outlining-compatible-or-attribute-transfer.ll
Reviewers: jdoefert, paquette
Differential Revision: https://reviews.llvm.org/D87301
There are functions that the linker is able to automatically
deduplicate, we do not outline from these functions by default. This
allows for outlining from those functions.
Tests:
llvm/test/Transforms/IROutliner/outlining-odr.ll
Reviewers: jroelofs, paquette
Differential Revision: https://reviews.llvm.org/D87309
Since some values can be swift errors, we need to make sure that we
correctly propagate the parameter attributes.
Tests found at:
llvm/test/Transforms/IROutliner/outlining-swift-error.ll
Reviewers: jroelofs, paquette
Recommit of: 71867ed5e6606a93f0c1413f205afe3bb16317fe
Differential Revision: https://reviews.llvm.org/D87742
This prints OptRemarks at each location where a decision is made to not
outline, or to outline a specific section for the IROutliner pass.
Test:
llvm/test/Transforms/IROutliner/opt-remarks.ll
Reviewers: jroelofs, paquette
Differential Revision: https://reviews.llvm.org/D87300
This adds a cost model that takes into account the total number of
machine instructions to be removed from each region, the number of
instructions added by adding a new function with a set of instructions,
and the instructions added by handling arguments.
Tests not adding flags:
llvm/test/Transforms/IROutliner/outlining-cost-model.ll
Reviewers: jroelofs, paquette
Differential Revision: https://reviews.llvm.org/D87299
Many of the sets of output stores will be the same. When a block is
created, we check if there is an output block with the same set of store
instructions. If there is, we map the output block of the region back
to the block, so that the extra argument controlling the switch
statement can be set to the appropriate block value.
Tests:
- llvm/test/Transforms/IROutliner/outlining-same-output-blocks.ll
Reviewers: jroelofs, paquette
Differential Revision: https://reviews.llvm.org/D87298
Certain regions can have values introduced inside the region that are
used outside of the region. These may not be the same for each similar
region, so we must create one over arching set of arguments for the
consolidated function.
We do this by iterating over the outputs for each extracted function,
and creating as many different arguments to encapsulate the different
outputs sets. For each output set, we create a different block with the
necessary stores from the value to the output register. There is then
one switch statement, controlled by an argument to the function, to
differentiate which block to use.
Changed Tests for consistency:
llvm/test/Transforms/IROutliner/extraction.ll
llvm/test/Transforms/IROutliner/illegal-assumes.ll
llvm/test/Transforms/IROutliner/illegal-memcpy.ll
llvm/test/Transforms/IROutliner/illegal-memmove.ll
llvm/test/Transforms/IROutliner/illegal-vaarg.ll
Tests to test new functionality:
llvm/test/Transforms/IROutliner/outlining-different-output-blocks.ll
llvm/test/Transforms/IROutliner/outlining-remapped-outputs.ll
llvm/test/Transforms/IROutliner/outlining-same-output-blocks.ll
Reviewers: jroelofs, paquette
Differential Revision: https://reviews.llvm.org/D87296
Some predicates, can be considered the same as long as the operands are
flipped. For example, a > b gives the same result as b > a. This maps
instructions in a greater than form, to their appropriate less than
form, swapping the operands in the IRInstructionData only, allowing for
more flexible matching.
Tests:
llvm/test/Transforms/IROutliner/outlining-isomorphic-predicates.ll
llvm/unittests/Analysis/IRSimilarityIdentifierTest.cpp
Reviewers: jroelofs, paquette
Recommit of commit 050392660249c70c00e909ae4a7151ba2c766235
Differential Revision: https://reviews.llvm.org/D87310
Some predicates, can be considered the same as long as the operands are
flipped. For example, a > b gives the same result as b > a. This maps
instructions in a greater than form, to their appropriate less than
form, swapping the operands in the IRInstructionData only, allowing for
more flexible matching.
Tests:
llvm/test/Transforms/IROutliner/outlining-isomorphic-predicates.ll
llvm/unittests/Analysis/IRSimilarityIdentifierTest.cpp
Reviewers: jroelofs, paquette
Differential Revision: https://reviews.llvm.org/D87310
