VectorizerStart extension is module callback in old PM, but is function
callback in new PM. We lack a module extension point between end of
buildModuleSimplificationPipeline and the function optimization
(including vectorizer) pipeline. So this patch adds a new module
extension point before the function optimization pipeline.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D122296
This is legacy PM-specific, which is deprecated.
Uses of this should be replaced with a corresponding `-passes='print<foo>'`.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D122420
Before we start addressing the issue with having
a lot of false positives when using debugify in
the original mode, we have made a few patches that
should speed up the execution of the testing
utility Passes.
For example, when testing a large project
(let's say LLVM project itself), we can face
a lot of potential DI issues. Usually, we use
-verify-each-debuginfo-preserve (that is very
similar to -debugify-each) -- it collects
DI metadata before each Pass, and after the Pass
it checks if the Pass preserved the DI metadata.
However, we can speed up this process, since we
don't need to collect DI metadata before each
Pass -- we could use the DI metadata that are
collected after the previous Pass from
the pipeline as an input for the next Pass.
This patch speeds up the utility for ~2x.
Differential Revision: https://reviews.llvm.org/D115622
The `opt -analyze` option only works with the legacy pass manager and might be removed in the future, as explained in llvm.org/PR53733. This patch introduced -polly-print-* passes that print what the pass would print with the `-analyze` option and replaces all uses of `-analyze` in the regression tests.
There are two exceptions: `CodeGen\single_loop_param_less_equal.ll` and `CodeGen\loop_with_condition_nested.ll` use `-analyze on the `-loops` pass which is not part of Polly.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D120782
This is a clean-up patch. The functional pass was rolled into the module pass in D112732.
Reviewed By: vitalybuka, aeubanks
Differential Revision: https://reviews.llvm.org/D120674
This PR fixes the tests for the `OptimizerLast` extension point in the new pass manager. The extension point uses module passes, but it was being tested with a function pass.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D120581
This PR adds two extension points to the default LTO pipeline in PassBuilder, one at the beginning and one at the end. These two extension points already existed in the old pass manager, the aim is to replicate the same functionality in the new one.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D120491
The RegionPrinter, RegionOnlyPrinter, RegionViewer and RegionOnlyViewer passes have not yet been ported to the new pass manager.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D119897
This relands commit b380a31de084a540cfa38b72e609b25ea0569bb7.
Restrict the tests to Windows only since the flag symbol hash depends on
system-dependent path normalization.
The introduction and some examples are on this page:
https://devblogs.microsoft.com/cppblog/announcing-jmc-stepping-in-visual-studio/
The `/JMC` flag enables these instrumentations:
- Insert at the beginning of every function immediately after the prologue with
a call to `void __fastcall __CheckForDebuggerJustMyCode(unsigned char *JMC_flag)`.
The argument for `__CheckForDebuggerJustMyCode` is the address of a boolean
global variable (the global variable is initialized to 1) with the name
convention `__<hash>_<filename>`. All such global variables are placed in
the `.msvcjmc` section.
- The `<hash>` part of `__<hash>_<filename>` has a one-to-one mapping
with a directory path. MSVC uses some unknown hashing function. Here I
used DJB.
- Add a dummy/empty COMDAT function `__JustMyCode_Default`.
- Add `/alternatename:__CheckForDebuggerJustMyCode=__JustMyCode_Default` link
option via ".drectve" section. This is to prevent failure in
case `__CheckForDebuggerJustMyCode` is not provided during linking.
Implementation:
All the instrumentations are implemented in an IR codegen pass. The pass is placed immediately before CodeGenPrepare pass. This is to not interfere with mid-end optimizations and make the instrumentation target-independent (I'm still working on an ELF port in a separate patch).
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D118428
If you don't include a target that directly references CFGuard it
doesn't get built into opt or the llvm library build, which causes some
test cases to fail.
Including this in opt explicitly resolve those issues.
Adding -debugify and -check-debugify in the PassRegistry will make
sure the passes are listed properly by -print-pipeline-passes as
well as -print-passes.
It also allows removal of the custom pipeline parsing callback that
has been used in the NewPMDriver.
Differential Revision: https://reviews.llvm.org/D118369
These were added to prevent functions from being removed by WPO.
But that doesn't make sense, correct WPO will not remove functions we actually use.
I noticed these because compiling cc1_main.cpp was pulling in random LLVM pass headers.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D112971
Right now when we see -O# we add the corresponding 'default<O#>' into
the list of passes to run when translating legacy -pass-name. This has
the side effect of not using the default AA pipeline.
Instead, treat -O# as -passes='default<O#>', but don't allow any other
-passes or -pass-name. I think we can keep `opt -O#` as shorthand for
`opt -passes='default<O#>` but disallow anything more than just -O#.
Tests need to be updated to not use `opt -O# -pass-name`.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D112036
This moves the registry higher in the LLVM library dependency stack.
Every client of the target registry needs to link against MC anyway to
actually use the target, so we might as well move this out of Support.
This allows us to ensure that Support doesn't have includes from MC/*.
Differential Revision: https://reviews.llvm.org/D111454
For strided accesses the loop vectorizer seems to prefer creating a
vector induction variable with a start value of the form
<i32 0, i32 1, i32 2, ...>. This value will be incremented each
loop iteration by a splat constant equal to the length of the vector.
Within the loop, arithmetic using splat values will be done on this
vector induction variable to produce indices for a vector GEP.
This pass attempts to dig through the arithmetic back to the phi
to create a new scalar induction variable and a stride. We push
all of the arithmetic out of the loop by folding it into the start,
step, and stride values. Then we create a scalar GEP to use as the
base pointer for a strided load or store using the computed stride.
Loop strength reduce will run after this pass and can do some
cleanups to the scalar GEP and induction variable.
Reviewed By: frasercrmck
Differential Revision: https://reviews.llvm.org/D107790
Added opt option -print-pipeline-passes to print a -passes compatible
string describing the built pass pipeline.
As an example:
$ opt -enable-new-pm=1 -adce -licm -simplifycfg -o /dev/null /dev/null -print-pipeline-passes
verify,function(adce),function(loop-mssa(licm)),function(simplifycfg<bonus-inst-threshold=1;no-forward-switch-cond;no-switch-to-lookup;keep-loops;no-hoist-common-insts;no-sink-common-insts>),verify,BitcodeWriterPass
At the moment this is best-effort only and there are some known
limitations:
- Not all passes accepting parameters will print their parameters
(currently only implemented for simplifycfg).
- Some ClassName to pass-name mappings are not unique.
- Some ClassName to pass-name mappings are missing (e.g.
BitcodeWriterPass).
Differential Revision: https://reviews.llvm.org/D108298
Added opt option -print-pipeline-passes to print a -passes compatible
string describing the built pass pipeline.
As an example:
$ opt -enable-new-pm=1 -adce -licm -simplifycfg -o /dev/null /dev/null -print-pipeline-passes
verify,function(adce),function(loop-mssa(licm)),function(simplifycfg<bonus-inst-threshold=1;no-forward-switch-cond;no-switch-to-lookup;keep-loops;no-hoist-common-insts;no-sink-common-insts>),verify,BitcodeWriterPass
At the moment this is best-effort only and there are some known
limitations:
- Not all passes accepting parameters will print their parameters
(currently only implemented for simplifycfg).
- Some ClassName to pass-name mappings are not unique.
- Some ClassName to pass-name mappings are missing (e.g.
BitcodeWriterPass).
A couple of passes that are parameterized in new-PM used different
pass names (in cmd line interface) while using the same pass class
name. This patch updates the PassRegistry to model pass parameters
more properly using PASS_WITH_PARAMS.
Reason for the change is to ensure that we have a 1-1 mapping
between class name and pass name (when disregarding the params).
With a 1-1 mapping it is more obvious which pass name to use in
options such as -debug-only, -print-after etc.
The opt -passes syntax is changed for the following passes:
early-cse-memssa => early-cse<memssa>
post-inline-ee-instrument => ee-instrument<post-inline>
loop-extract-single => loop-extract<single>
lower-matrix-intrinsics-minimal => lower-matrix-intrinsics<minimal>
This patch is not updating pass names in docs/Passes.rst. Not quite
sure what the status is for that document (e.g. when it comes to
listing pass paramters). It is only loop-extract-single that is
mentioned in Passes.rst today, out of the passes mentioned above.
Differential Revision: https://reviews.llvm.org/D108362
Refactored implementation of AddressSanitizerPass and
HWAddressSanitizerPass to use pass options similar to passes like
MemorySanitizerPass. This makes sure that there is a single mapping
from class name to pass name (needed by D108298), and options like
-debug-only and -print-after makes a bit more sense when (despite
that it is the unparameterized pass name that should be used in those
options).
A result of the above is that some pass names are removed in favor
of the parameterized versions:
- "khwasan" is now "hwasan<kernel;recover>"
- "kasan" is now "asan<kernel>"
- "kmsan" is now "msan<kernel>"
Differential Revision: https://reviews.llvm.org/D105007
This patch implements Flow Sensitive Sample FDO (FSAFDO) profile
loader. We have two profile loaders for FS profile,
one before RegAlloc and one before BlockPlacement.
To enable it, when -fprofile-sample-use=<profile> is specified,
add "-enable-fs-discriminator=true \
-disable-ra-fsprofile-loader=false \
-disable-layout-fsprofile-loader=false"
to turn on the FS profile loaders.
Differential Revision: https://reviews.llvm.org/D107878
Previoulsy debug-info-for-profiling and pseudo-probe-for-profiling are mutual exclusive because they compete the dwarf discrimnator for callsites on the IR. This changes allows to use the two switches together. The side effect is that callsite discriminators will be taken by pseudo probe, while discriminators for other instructions are still available for AutoFDO use. This is less than ideal, however, it still allows us a chance to smoothly transition from AutoFDO to CSSPGO, by collecting both profiles from a CSSPGO binary.
Reviewed By: wenlei, wmi
Differential Revision: https://reviews.llvm.org/D107876
Pulled out the OptimizationLevel class from PassBuilder in order to be able to access it from within the PassManager and avoid include conflicts.
Reviewed By: mtrofin
Differential Revision: https://reviews.llvm.org/D107025
This patch make coroutine passes run by default in LLVM pipeline. Now
the clang and opt could handle IR inputs containing coroutine intrinsics
without special options.
It should be fine. On the one hand, the coroutine passes seems to be stable
since there are already many projects using coroutine feature.
On the other hand, the coroutine passes should do nothing for IR who doesn't
contain coroutine intrinsic.
Test Plan: check-llvm
Reviewed by: lxfind, aeubanks
Differential Revision: https://reviews.llvm.org/D105877
We don't want to start updating tests to use opaque pointers until we're
close to the opaque pointer transition. However, before the transition
we want to run tests as if pointers are opaque pointers to see if there
are any crashes.
At some point when we have a flag to only create opaque pointers in the
bitcode and textual IR readers, and when we have fixed all places that
try to read a pointee type, this flag will be useless. However, until
then, this can help us find issues more easily.
Since the cl::opt is read into LLVMContext, we need to make sure
LLVMContext is created after cl::ParseCommandLineOptions().
Previously ValueEnumerator would visit the value types of global values
via the pointer type, but with opaque pointers we have to manually visit
the value type.
Reviewed By: nikic, dexonsmith
Differential Revision: https://reviews.llvm.org/D103503
To bring D99599's implementation in line with the existing
PrintPassInstrumentation, and to fix a FIXME, add more customizability
to PrintPassInstrumentation.
Introduce three new options. The first takes over the existing
"-debug-pass-manager-verbose" cl::opt.
The second and third option are specific to -fdebug-pass-structure. They
allow indentation, and also don't print analysis queries.
To avoid more golden file tests than necessary, prune down the
-fdebug-pass-structure tests.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D102196
Printing pass manager invocations is fairly verbose and not super
useful.
This allows us to remove DebugLogging from pass managers and PassBuilder
since all logging (aside from analysis managers) goes through
instrumentation now.
This has the downside of never being able to print the top level pass
manager via instrumentation, but that seems like a minor downside.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D101797
We're trying to move DebugLogging into instrumentation, rather than
being part of PassManagers/AnalysisManagers.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D102093
This reverts the revert 02c5ba8679873e878ae7a76fb26808a47940275b
Fix:
Pass was registered as DUMMY_FUNCTION_PASS causing the newpm-pass
functions to be doubly defined. Triggered in -DLLVM_ENABLE_MODULE=1
builds.
Original commit:
This patch implements expansion of llvm.vp.* intrinsics
(https://llvm.org/docs/LangRef.html#vector-predication-intrinsics).
VP expansion is required for targets that do not implement VP code
generation. Since expansion is controllable with TTI, targets can switch
on the VP intrinsics they do support in their backend offering a smooth
transition strategy for VP code generation (VE, RISC-V V, ARM SVE,
AVX512, ..).
Reviewed By: rogfer01
Differential Revision: https://reviews.llvm.org/D78203
This patch implements expansion of llvm.vp.* intrinsics
(https://llvm.org/docs/LangRef.html#vector-predication-intrinsics).
VP expansion is required for targets that do not implement VP code
generation. Since expansion is controllable with TTI, targets can switch
on the VP intrinsics they do support in their backend offering a smooth
transition strategy for VP code generation (VE, RISC-V V, ARM SVE,
AVX512, ..).
Reviewed By: rogfer01
Differential Revision: https://reviews.llvm.org/D78203
This reverts commit 3b8ec86fd576b9808dc63da620d9a4f7bbe04372.
Revert "[X86] Refine AMX fast register allocation"
This reverts commit c3f95e9197643b699b891ca416ce7d72cf89f5fc.
This pass breaks using LLVM in a multi-threaded environment by
introducing global state.
