This patch adds the necessary AMDGPU calling convention to the ctor /
dtor kernels. These are fundamentally device kenels called by the host
on image load. Without this calling convention information the AMDGPU
plugin is unable to identify them.
Depends on D122504
Fixes#54091
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D122515
`bug49334.cpp` has one issue that causes flaky result reported in #53730.
The root cause is `BlockedC` is never initialized but in `BlockMatMul_TargetNowait`
it is directly read and written (via `+=`). Fixes#53730.
Reviewed By: jhuber6
Differential Revision: https://reviews.llvm.org/D119988
This patch adds a new target to the OpenMP CPU offloading tests. This
tests the usage of the new driver for CPU offloading. If this all works
then we can move to transition to the new driver as the default.
Depends on D119613
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D119736
This patch fixes the issue that the for loop in `applyToShadowMapEntries`
is infinite because `Itr` is not incremented in `CB`. Fixes#53727.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D119471
`bug49334.cpp` directly uses `!=` to compare two floating point values,
which is almost wrong.
Reviewed By: jhuber6
Differential Revision: https://reviews.llvm.org/D119485
The 'bug49779.cpp' test has been failing recently. This is because the
runtime is sufficiently complex when using nested parallelism without
optimizations that the CUDA tools cannot statically determine the stack
size. Because of this the kernel can exceed the thread stack size and
crash. Work around this using the 'LIBOMPTARGET_STACK_SIZE' environment
variable and add an FAQ entry for this situation.
Fixes#53670
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D119357
This patch enables running the new driver tests for AMDGPU. Previously
this was disabled because some tests failed. This was only because the
new driver tests hadn't been listed as unsupported or expected to fail.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D119240
This patch completely removes the old OpenMP device runtime. Previously,
the old runtime had the prefix `libomptarget-new-` and the old runtime
was simply called `libomptarget-`. This patch makes the formerly new
runtime the only runtime available. The entire project has been deleted,
and all references to the `libomptarget-new` runtime has been replaced
with `libomptarget-`.
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D118934
This patch adds a new target to the tests to run using the new driver as
the method for generating offloading code.
Depends on D116541
Differential Revision: https://reviews.llvm.org/D118637
This implements the runtime portion of the interop directive.
It expects the frontend and IRBuilder portions to be in place
for proper execution. It currently works only for GPUs
and has several TODOs that should be addressed going forward.
Reviewed By: RaviNarayanaswamy
Differential Revision: https://reviews.llvm.org/D106674
In most cases, hidden helper task behave similar as detached tasks. That means,
for example, if we have to wait for detached tasks, we have to do the same thing
for hidden helper tasks as well. This patch adds the missing condition for hidden
helper task accordingly along with detached task.
Reviewed By: AndreyChurbanov
Differential Revision: https://reviews.llvm.org/D107316
D113602 broke the custom state machine when a reduction is present, as
revealed by the reproducer this patch adds to the test suite. In that
case, openmp-opts changes the return value to undef in
`__kmpc_get_warp_size` (which the custom state machine calls as of
D113602). Later optimizations then optimize away the custom state
machine code as if all threads are outside the thread block, so the
target region does not execute. D114802 fixed that but didn't add a
reproducer.
This patch also adds a `__OMP_RTL_ATTRS` entry for
`__kmpc_get_warp_size` to OMPKinds.def, which D113602 missed. This
change does not seem to have any impact on the reduction problem.
Reviewed By: JonChesterfield, jdoerfert
Differential Revision: https://reviews.llvm.org/D113824
Extension of D112504. Lower amdgpu printf to `__llvm_omp_vprintf`
which takes the same const char*, void* arguments as cuda vprintf and also
passes the size of the void* alloca which will be needed by a non-stub
implementation of `__llvm_omp_vprintf` for amdgpu.
This removes the amdgpu link error on any printf in a target region in favour
of silently compiling code that doesn't print anything to stdout.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D112680
Extension of D112504. Lower amdgpu printf to `__llvm_omp_vprintf`
which takes the same const char*, void* arguments as cuda vprintf and also
passes the size of the void* alloca which will be needed by a non-stub
implementation of `__llvm_omp_vprintf` for amdgpu.
This removes the amdgpu link error on any printf in a target region in favour
of silently compiling code that doesn't print anything to stdout.
The exact set of changes to check-openmp probably needs revision before commit
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D112680
Passes same tests as the current deviceRTL. Includes cmake change from D111987.
CI is showing a different set of pass/fails to local, committing this
without the tests enabled by default while debugging that difference.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D112227
Passes same tests as the current deviceRTL. Includes cmake change from D111987.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D112227
Fixes 51982. Adds a missing CreatePointerCast and allocates a global in
the correct address space.
Test case derived from https://github.com/ROCm-Developer-Tools/aomp/\
blob/aomp-dev/test/smoke/nest_call_par2/nest_call_par2.c by deleting
parts while checking the assertion failure still occurred.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D110556
Fixes 51982. Minor refactor to remove `return x = y` construct.
Test case derived from https://github.com/ROCm-Developer-Tools/aomp/\
blob/aomp-dev/test/smoke/nest_call_par2/nest_call_par2.c by deleting
parts while checking the assertion failure still occurred.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D110556
This patch implements OpenMP runtime support for an original OpenMP
extension we have developed to support OpenACC: the `ompx_hold` map
type modifier. The previous patch in this series, D106509, implements
Clang support and documents the new functionality in detail.
Reviewed By: grokos
Differential Revision: https://reviews.llvm.org/D106510
Currently, the runtime returns an error when the `exec_mode` global is
not present. The expected behvaiour is that the region will default to
Generic. This prevents global constructors from being called because
they do not contain execution mode globals.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D108255
Bug 50022 [0] reports target nowait fails in certain case, which is added in this
patch. The root cause of the failure is, when the second task is created, its
parent's `td_incomplete_child_tasks` will not be incremented because there is no
parallel region here thus its team is serialized. Therefore, when the initial
thread is waiting for its unfinished children tasks, it thought there is only
one, the first task, because it is hidden helper task, so it is tracked. The
second task will only be pushed to the queue when the first task is finished.
However, when the first task finishes, it first decrements the counter of its
parent, and then release dependences. Once the counter is decremented, the thread
will move on because its counter is reset, but actually, the second task has not
been executed at all. As a result, since in this case, the main function finishes,
then `libomp` starts to destroy. When the second task is pushed somewhere, all
some of the structures might already have already been destroyed, then anything
could happen.
This patch simply moves `__kmp_release_deps` ahead of decrement of the counter.
In this way, we can make sure that the initial thread is aware of the existence
of another task(s) so it will not move on. In addition, in order to tackle
dependence chain starting with hidden helper thread, when hidden helper task is
encountered, we force the task to release dependences.
Reference:
[0] https://bugs.llvm.org/show_bug.cgi?id=50022
Reviewed By: AndreyChurbanov
Differential Revision: https://reviews.llvm.org/D106519
For example, without this patch:
```
$ cat test.c
int main() {
int x;
#pragma omp target enter data map(alloc: x)
#pragma omp target exit data map(release: x)
;
return 0;
}
$ clang -fopenmp -fopenmp-targets=nvptx64-nvidia-cuda test.c
$ LIBOMPTARGET_DEBUG=1 ./a.out |& grep 'Creating\|Mapping exists'
Libomptarget --> Creating new map entry with HstPtrBegin=0x00007ffcace8e448, TgtPtrBegin=0x00007f12ef600000, Size=4, Name=unknown
Libomptarget --> Mapping exists with HstPtrBegin=0x00007ffcace8e448, TgtPtrBegin=0x00007f12ef600000, Size=4, updated RefCount=1
```
There are two problems in this example:
* `RefCount` is not reported when a mapping is created, but it might
be 1 or infinite. In this case, because it's created by `omp target
enter data`, it's 1. Seeing that would make later `RefCount`
messages easier to understand.
* `RefCount` is still 1 at the `omp target exit data`, but it's
reported as `updated`. The reason it's still 1 is that, upon
deletions, the reference count is generally not updated in
`DeviceTy::getTgtPtrBegin`, where the report is produced. Instead,
it's zeroed later in `DeviceTy::deallocTgtPtr`, where it's actually
removed from the mapping table.
This patch makes the following changes:
* Report the reference count when creating a mapping.
* Where an existing mapping is reported, always report a reference
count action:
* `update suppressed` when `UpdateRefCount=false`
* `incremented`
* `decremented`
* `deferred final decrement`, which replaces the misleading
`updated` in the above example
* Add comments to `DeviceTy::getTgtPtrBegin` to explain why it does
not zero the reference count. (Please advise if these comments miss
the point.)
* For unified shared memory, don't report confusing messages like
`RefCount=` or `RefCount= updated` given that reference counts are
irrelevant in this case. Instead, just report `for unified shared
memory`.
* Use `INFO` not `DP` consistently for `Mapping exists` messages.
* Fix device table dumps to print `INF` instead of `-1` for an
infinite reference count.
Reviewed By: jhuber6, grokos
Differential Revision: https://reviews.llvm.org/D104559
`bug49334.cpp` cannot detect data race in `libomptarget` efficiently. It
is reported that with `N = 256` and `BS = 16`, the data race can be reproduced
more steadily. The next coming pathces will fix it so this patch is expected to
fail now.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D104552
This patch adds an information flag that indicated when data is being copied to
and from the device. This will be helpful for finding redundant or unnecessary
data transfers in applications.
Reviewed By: jdoerfert, grokos
Differential Revision: https://reviews.llvm.org/D103927
[libomptarget] Disable test bug49334 on amdgpu
Hangs on amdgpu, do not know why. Disable to unblock build.
Reviewed By: ye-luo
Differential Revision: https://reviews.llvm.org/D102017
This enables the runtime tests on amdgpu targets.
10 tests have been marked as XFAIL on amdgcn currently mostly due to
missing printf.
Reviewed By: protze.joachim
Differential Revision: https://reviews.llvm.org/D99656
This patch fuses the RUN lines for most libomptarget tests. The previous patch
D101315 created separate test targets for each supported offloading triple.
This patch updates the RUN lines in libomptarget tests to use a generic run
line independent of the offloading target selected for the lit instance.
In cases, where no RUN line was defined for a specific offloading target,
the corresponding target is declared as XFAIL. If it turns out that a test
actually supports the target, the XFAIL line can be removed.
Differential Revision: https://reviews.llvm.org/D101326
Summary:
This patch adds a new runtime function __tgt_set_info_flag that allows the
user to set the information level at runtime without using the environment
variable. Using this will require an extern function, but will eventually be
added into an auxilliary library for OpenMP support functions.
This patch required moving the current InfoLevel to a global variable which must
be instantiated by each plugin.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D100774
This revision simplifies Clang codegen for parallel regions in OpenMP GPU target offloading and corresponding changes in libomptarget: SPMD/non-SPMD parallel calls are unified under a single `kmpc_parallel_51` runtime entry point for parallel regions (which will be commonized between target, host-side parallel regions), data sharing is internalized to the runtime. Tests have been auto-generated using `update_cc_test_checks.py`. Also, the revision contains changes to OpenMPOpt for remark creation on target offloading regions.
Reviewed By: jdoerfert, Meinersbur
Differential Revision: https://reviews.llvm.org/D95976
Summary:
This patch adds a feature to print information whenever the host-device pointer
mapping table is changed by inserting or removing an entry. This introduces a
new bit field for LIBOMPTARGET_INFO at position 0x8.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D100600
Summary:
The changes introduced in D87946 changed the API for libomptarget
functions. `__kmpc_push_target_tripcount` was a function in Clang 11.x
but was not given a backward-compatible interface. This change will
require people using Clang 13.x or 12.x to recompile their offloading
programs.
Reviewed By: jdoerfert cchen
Differential Revision: https://reviews.llvm.org/D98358
Without this patch, an `omp target exit data` before the runtime is
initialized produces a runtime error. This patch fixes that by
changing `__tgt_target_data_end_mapper` to call `CheckDeviceAndCtors`
like many other runtime routines.
Discussed at
<https://lists.llvm.org/pipermail/openmp-dev/2021-March/003920.html>.
Reviewed By: grokos
Differential Revision: https://reviews.llvm.org/D97907
Without this patch, when the offload device is set to
`omp_get_initial_device()`, the runtime fails with an error diagnostic
when entering target regions or target data regions.
However, OpenMP 5.1, sec. 2.14.5 "target Construct", "Restrictions",
p. 203, L3-5 states:
> The device clause expression must evaluate to a non-negative integer
> value that is less than or equal to the value of
> omp_get_num_devices().
Sec. 3.7.7 "omp_get_initial_device", p. 412, L2-3 states:
> The value of the device number is the value returned by the
> omp_get_num_devices routine.
Similarly, OpenMP 5.0, sec. 2.12.5 "target Construct", "Restrictions",
p. 174 L30-32 states:
> The device clause expression must evaluate to a non-negative integer
> value less than the value of omp_get_num_devices() or to the value
> of omp_get_initial_device().
This patch fixes this behavior by changing the runtime to behave as if
offloading is disabled whenever it finds the offload device (either
from a `device` clause or the default device) is set to the host
device. In the case of mandatory offloading when
`omp_get_num_devices() == 0`, it incorporates the behavior proposed
for OpenMP 5.2 in OpenMP spec github issue 2669.
Reviewed By: grokos, RaviNarayanaswamy
Differential Revision: https://reviews.llvm.org/D97616
PR#49334 reports a crash when offloading to x86_64 with `target nowait`,
which is caused by referencing a nullptr. The root cause of the issue is, when
pushing a hidden helper task in `__kmp_push_task`, it also maps the gtid to its
shadow gtid, which is wrong.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D97329
Currently if there is not kernel argument, device synchronization will
be skipped. This can lead to two issues:
1. If there is any device error, it will not be captured;
2. The target region might end before the kernel is done, which is not spec
conformant.
The test added in this patch only runs on NVPTX platform, although it will not
be executed by Phab at all. It also requires `not` which is not available on most
systems.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D96067
Summary:
This patch adds more fine-grained support over which information is output from the libomptarget runtime when run with the environment variable LIBOMPTARGET_INFO set. An extensible set of flags can be used to pick and choose which information the user is interested in.
Reviewers: jdoerfert JonChesterfield grokos
Differential Revision: https://reviews.llvm.org/D93727
This patch is the runtime support for https://reviews.llvm.org/D84192.
In order not to modify the tgt_target_data_update information but still be
able to pass the extra information for non-contiguous map item (offset,
count, and stride for each dimension), this patch overload arg when
the maptype is set as OMP_TGT_MAPTYPE_DESCRIPTOR. The origin arg is for
passing the pointer information, however, the overloaded arg is an
array of descriptor_dim:
```
struct descriptor_dim {
int64_t offset;
int64_t count;
int64_t stride
};
```
and the array size is the dimension size. In addition, since we
have count and stride information in descriptor_dim, we can replace/overload the
arg_size parameter by using dimension size.
Reviewed By: grokos, tianshilei1992
Differential Revision: https://reviews.llvm.org/D82245
This patch is the runtime support for https://reviews.llvm.org/D84192.
In order not to modify the tgt_target_data_update information but still be
able to pass the extra information for non-contiguous map item (offset,
count, and stride for each dimension), this patch overload arg when
the maptype is set as OMP_TGT_MAPTYPE_DESCRIPTOR. The origin arg is for
passing the pointer information, however, the overloaded arg is an
array of descriptor_dim:
```
struct descriptor_dim {
int64_t offset;
int64_t count;
int64_t stride
};
```
and the array size is the dimension size. In addition, since we
have count and stride information in descriptor_dim, we can replace/overload the
arg_size parameter by using dimension size.
Reviewed By: grokos
Differential Revision: https://reviews.llvm.org/D82245
