Current internal option -static-func-full-module-prefix keeps all the
directory path the profile counter names for static functions. The default
of this option is false. This strips the directory names from the source
filename which is problematic:
(1) it creates linker errors for profile-generation compilation, exposed in
our internal benchmarks. We are seeing messages like
"warning: relocation refers to discarded section".
This is due to the name conflicts after the stripping.
(2) the stripping only applies to getPGOFuncName.
Current Thin-LTO module importing for the indirect-calls assumes
the source directory name not being stripped. Current default value
for this option can potentially prevent some inter-module
indirect-call-promotions.
This patch turns the default value for -static-func-full-module-prefix to true.
The second part of the patch is to have an alternative implementation under
the internal option -static-func-strip-dirname-prefix=<value>
This options specifies level of directories to be stripped from the source
filename. Using a large value as the parameter has the same effect as
-static-func-full-module-prefix.
Differential Revision: http://reviews.llvm.org/D29512
llvm-svn: 296206
When we construct addressing modes, we use isNoopAddrSpaceCast to ignore
addrspacecast instructions. Make sure we insert the correct addrspacecast
when we reconstruct the addressing mode.
Differential Revision: https://reviews.llvm.org/D30114
llvm-svn: 296167
This optimisation was crashing when there was a chain of more than one bitcast
instruction to replace, as a result of the changes in D27283.
Patch by James Price.
Differential Revision: https://reviews.llvm.org/D30347
llvm-svn: 296163
Splitting critical edges when one of the source edges is an indirectbr
is hard in general (because it requires changing the memory the indirectbr
reads). But if a block only has a single indirectbr predecessor (which is
the common case), we can simulate splitting that edge by splitting
the destination block, and retargeting the *direct* branches.
This is motivated by the use of computed gotos in python 2.7: PyEval_EvalFrame()
ends up using an indirect branch with ~100 successors, and passing a constant to
each of those. Since MachineSink can't break indirect critical edges on demand
(and doing this in MIR doesn't look feasible), this causes us to emit about ~100
defs of registers containing constants, which we in the predecessor block, where
only one of those constants is used in each successor. So, at each computed goto,
we needlessly spill about a 100 constants to stack. The end result is that a
clang-compiled python interpreter can be about ~2.5x slower on a simple python
reduction loop than a gcc-compiled interpreter.
Differential Revision: https://reviews.llvm.org/D29916
llvm-svn: 296149
This patch merges the existing floating-point induction variable widening code
into the integer induction variable widening code, creating a single set of
functions for both kinds of inductions. The primary motivation for doing this
is to enable vector phi node creation for floating-point induction variables.
Differential Revision: https://reviews.llvm.org/D30211
llvm-svn: 296145
The Fuchsia ABI defines slots from the thread pointer where the
stack-guard value for stack-protector, and the unsafe stack pointer
for safe-stack, are stored. This parallels the Android ABI support.
Patch by Roland McGrath
Differential Revision: https://reviews.llvm.org/D30237
llvm-svn: 296081
Splitting critical edges when one of the source edges is an indirectbr
is hard in general (because it requires changing the memory the indirectbr
reads). But if a block only has a single indirectbr predecessor (which is
the common case), we can simulate splitting that edge by splitting
the destination block, and retargeting the *direct* branches.
This is motivated by the use of computed gotos in python 2.7: PyEval_EvalFrame()
ends up using an indirect branch with ~100 successors, and passing a constant to
each of those. Since MachineSink can't break indirect critical edges on demand
(and doing this in MIR doesn't look feasible), this causes us to emit about ~100
defs of registers containing constants, which we in the predecessor block, where
only one of those constants is used in each successor. So, at each computed goto,
we needlessly spill about a 100 constants to stack. The end result is that a
clang-compiled python interpreter can be about ~2.5x slower on a simple python
reduction loop than a gcc-compiled interpreter.
Differential Revision: https://reviews.llvm.org/D29916
llvm-svn: 296060
Summary: In case we do not know what the condition is in an unswitched loop, but we know its definitely NOT a known constant. We can perform simplifcations based on this information.
Reviewers: sanjoy, hfinkel, chenli, efriedma
Reviewed By: efriedma
Subscribers: david2050, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D28968
llvm-svn: 296041
While not CVP's fault, this caused miscompiles (PR31181). Reverting
until those are resolved.
(This also reverts the follow-ups r288154 and r288161 which removed the
flag.)
llvm-svn: 296030
Summary: SamplePGO uses branch_weight annotation to represent callsite hotness. When ICP promotes an indirect call to direct call, we need to make sure the direct call is annotated with branch_weight in SamplePGO mode, so that downstream function inliner can use hot callsite heuristic.
Reviewers: davidxl, eraman, xur
Reviewed By: davidxl, xur
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D30282
llvm-svn: 296028
In OptimizeAdd, we scan the operand list to see if there are any common factors
between operands that can be factored out to reduce the number of multiplies
(e.g., 'A*A+A*B*C+D' -> 'A*(A+B*C)+D'). For each operand of the operand list, we
only consider unique factors (which is tracked by the Duplicate set). Now if we
find a factor that is a negative constant, we add the negated value as a factor
as well, because we can percolate the negate out. However, we mistakenly don't
add this negated constant to the Duplicates set.
Consider the expression A*2*-2 + B. Obviously, nothing to factor.
For the added value A*2*-2 we over count 2 as a factor without this change,
which causes the assert reported in PR30256. The problem is that this code is
assuming that all the multiply operands of the add are already reassociated.
This change avoids the issue by making OptimizeAdd tolerate multiplies which
haven't been completely optimized; this sort of works, but we're doing wasted
work: we'll end up revisiting the add later anyway.
Another possible approach would be to enforce RPO iteration order more strongly.
If we have RedoInsts, we process them immediately in RPO order, rather than
waiting until we've finished processing the whole function. Intuitively, it
seems like the natural approach: reassociation works on expression trees, so
the optimization only works in one direction. That said, I'm not sure how
practical that is given the current Reassociate; the "optimal" form for an
expression depends on its use list (see all the uses of "user_back()"), so
Reassociate is really an iterative optimization of sorts, so any changes here
would probably get messy.
PR30256
Differential Revision: https://reviews.llvm.org/D30228
llvm-svn: 296003
Summary: The discriminator has been encoded, and only the base discriminator should be used during profile matching.
Reviewers: dblaikie, davidxl
Reviewed By: dblaikie, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30218
llvm-svn: 295999
result
Summary:
If the same value is used several times as an extra value, SLP
vectorizer takes it into account only once instead of actual number of
using.
For example:
```
int val = 1;
for (int y = 0; y < 8; y++) {
for (int x = 0; x < 8; x++) {
val = val + input[y * 8 + x] + 3;
}
}
```
We have 2 extra rguments: `1` - initial value of horizontal reduction
and `3`, which is added 8*8 times to the reduction. Before the patch we
added `1` to the reduction value and added once `3`, though it must be
added 64 times.
Reviewers: mkuper, mzolotukhin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30262
llvm-svn: 295972
result
Summary:
If the same value is used several times as an extra value, SLP
vectorizer takes it into account only once instead of actual number of
using.
For example:
```
int val = 1;
for (int y = 0; y < 8; y++) {
for (int x = 0; x < 8; x++) {
val = val + input[y * 8 + x] + 3;
}
}
```
We have 2 extra rguments: `1` - initial value of horizontal reduction
and `3`, which is added 8*8 times to the reduction. Before the patch we
added `1` to the reduction value and added once `3`, though it must be
added 64 times.
Reviewers: mkuper, mzolotukhin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30262
llvm-svn: 295956
result
Summary:
If the same value is used several times as an extra value, SLP
vectorizer takes it into account only once instead of actual number of
using.
For example:
```
int val = 1;
for (int y = 0; y < 8; y++) {
for (int x = 0; x < 8; x++) {
val = val + input[y * 8 + x] + 3;
}
}
```
We have 2 extra rguments: `1` - initial value of horizontal reduction
and `3`, which is added 8*8 times to the reduction. Before the patch we
added `1` to the reduction value and added once `3`, though it must be
added 64 times.
Reviewers: mkuper, mzolotukhin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30262
llvm-svn: 295949
Implement isLegalToVectorizeLoadChain for AMDGPU to avoid
producing private address spaces accesses that will need to be
split up later. This was doing the wrong thing in the case
where the queried chain was an even number of elements.
A possible <4 x i32> store was being split into
store <2 x i32>
store i32
store i32
rather than
store <2 x i32>
store <2 x i32>
when legal.
llvm-svn: 295933
Summary:
Depends on D29606 and D29682
Makes us pass GVN's edge.ll (we also will pass a few other testcases
they just need cleaning up).
Thoughts on the Predicate* hiearchy of classes especially welcome :)
(it's not clear to me how best to organize it, and currently, the getBlock* seems ... uglier than maybe wasting a field somewhere or something).
Reviewers: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29747
llvm-svn: 295889
After rL294814, LSR formula can have multiple SCEVAddRecExprs inside of its BaseRegs.
Previous canonicalization will swap the first SCEVAddRecExpr in BaseRegs with ScaledReg.
But now we want to swap the SCEVAddRecExpr Reg related with current loop with ScaledReg.
Otherwise, we may generate code like this: RegA + lsr.iv + RegB, where loop invariant
parts RegA and RegB are not grouped together and cannot be promoted outside of loop.
With this patch, it will ensure lsr.iv to be generated later in the expr:
RegA + RegB + lsr.iv, so that RegA + RegB can be promoted outside of loop.
Differential Revision: https://reviews.llvm.org/D26781
llvm-svn: 295884
Summary:
If the same value is used several times as an extra value, SLP
vectorizer takes it into account only once instead of actual number of
using.
For example:
```
int val = 1;
for (int y = 0; y < 8; y++) {
for (int x = 0; x < 8; x++) {
val = val + input[y * 8 + x] + 3;
}
}
```
We have 2 extra rguments: `1` - initial value of horizontal reduction
and `3`, which is added 8*8 times to the reduction. Before the patch we
added `1` to the reduction value and added once `3`, though it must be
added 64 times.
Reviewers: mkuper, mzolotukhin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30262
llvm-svn: 295868
Prevent memory objects of different address spaces to be part of
the same load/store groups when analysing interleaved accesses.
This is fixing pr31900.
Reviewers: HaoLiu, mssimpso, mkuper
Reviewed By: mssimpso, mkuper
Subscribers: llvm-commits, efriedma, mzolotukhin
Differential Revision: https://reviews.llvm.org/D29717
This reverts r295042 (re-applies r295038) with an additional fix for the
buildbot problem.
llvm-svn: 295858
Summary: The CallTargetProfile should be added to FProfile to be consistent with other profile readers.
Reviewers: dnovillo, davidxl
Reviewed By: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30233
llvm-svn: 295852
This enables peeling of loops with low dynamic iteration count by default,
when profile information is available.
Differential Revision: https://reviews.llvm.org/D27734
llvm-svn: 295796
This is part of trying to clean up our handling of min/max patterns in IR.
By converting these to canonical form, we're more likely to recognize them
because there are various places in InstCombine that don't use
matchSelectPattern or m_SMax and friends.
The backend fixups referenced in the now deleted TODO comment were added with:
https://reviews.llvm.org/rL291392https://reviews.llvm.org/rL289738
If there's any codegen fallout from this change, we should be able to address
it in DAGCombiner or target-specific lowering.
llvm-svn: 295758
Summary:
This is a fix for assertion failure in
`getInverseMinMaxSelectPattern` when ABS is passed in as a select pattern.
We should not be invoking the simplification rule for
ABS(MIN(~ x,y))) or ABS(MAX(~x,y)) combinations.
Added a test case which would cause an assertion failure without the patch.
Reviewers: sanjoy, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30051
llvm-svn: 295719
The new method introduced under "-lsr-exp-narrow" option (currenlty set to true).
Summary:
The method is based on registers number mathematical expectation and should be
generally closer to optimal solution.
Please see details in comments to
"LSRInstance::NarrowSearchSpaceByDeletingCostlyFormulas()" function
(in lib/Transforms/Scalar/LoopStrengthReduce.cpp).
Reviewers: qcolombet
Differential Revision: http://reviews.llvm.org/D29862
From: Evgeny Stupachenko <evstupac@gmail.com>
llvm-svn: 295704
Summary: This begins using the predicateinfo pass in NewGVN.
Reviewers: davide
Subscribers: llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D29682
llvm-svn: 295583
Changing to 'or' (rather than 'xor' when no wrapping flags are set)
allows icmp simplifies to happen as expected.
Differential Revision: https://reviews.llvm.org/D29729
llvm-svn: 295574
The change to InstCombine in:
https://reviews.llvm.org/D29729
...exposes this missing fold in InstSimplify, so adding this
first to avoid a regression.
llvm-svn: 295573
A line number doesn't make much sense if you don't say where it's
from. Add a verifier check for this and update some tests that had
bogus debug info.
llvm-svn: 295516
