This patch fixes a crash when using process launch -t to launch the
inferior from a TTY. The issue is that on Darwin, Host.mm is calling
ConnectionFileDescriptor::Connect without a socket_id_callback_type. The
overload passes nullptr as the function ref, which gets called
unconditionally as the socket_id_callback.
One potential way to fix this is to change all the lambdas to include a
null check, but instead I went with an empty lambda.
Differential revision: https://reviews.llvm.org/D124535
FixAnyAddress is to be used when we don't know or don't care
whether we're fixing a code or data address.
By using FixAnyAddress over the others, you document that no
specific choice was made.
On all existing platforms apart from Arm Thumb, you could use
either FixCodeAddress or FixDataAddress and be fine. Up until
now I've chosen to use FixDataAddress but if I had
chosen to use FixCodeAddress that would have broken Arm Thumb.
Hence FixAnyAddress, to give you the "safest" option when you're
in generic code.
Uses of FixDataAddress in memory region code have been changed
to FixAnyAddress. The functionality is unchanged.
Reviewed By: omjavaid, JDevlieghere
Differential Revision: https://reviews.llvm.org/D124000
Fix escaping when launching in terminal with AppleScript. The invocation
we're building up is wrapped in single quotes when passed to bash and
wrapped in double quotes for AppleScript.
Here's an example invocation with the new escaping:
tell application "Terminal"
activate
do script "/bin/bash -c 'arch -arch arm64 'darwin-debug'
--unix-socket=/tmp/dL2jSh --arch=arm64 --working-dir
\"/private/tmp/with spaces\" --disable-aslr -- \"foo\"
\"bar\" \"baz\" ; echo Process exited with status $?';exit"
end tell
Previously we were using unescaped single quotes which resulted in the
whole bash invocation being passed in pieces. That works most of the
time but breaks when you have a space in your current working directory
for example.
rdar://91870763
Differential revision: https://reviews.llvm.org/D124568
Rather than looking up by offset - actually use the hash table to
perform faster lookup where possible. (for DWARFv4 DWP compilation units
the hash isn't in the header - it's in the root DIE, but to parse the
DIE you need the abbrev section and to get the abbrev section you need
the index - so in that case lookup by offset is required)
- Don't reset cur_line_offset to llvm::None when we don't have next_line_offset, because we may need to reuse it in new range after a code end.
- Don't use CombineConsecutiveEntriesWithEqualData for inline_site_sp->ranges, because that will combine consecutive entries with same data in the vector regardless of the entry's range. Originally, I thought that it only combine consecutive entries if adjacent entries' ranges are adjoining or intersecting with each other.
We dropped downstream support for Python 2 in the previous release. Now
that we have branched for the next release the window where this kind of
change could introduce conflicts is closing too. Start by getting rid of
Python 2 support in the Script Interpreter plugin.
Differential revision: https://reviews.llvm.org/D124429
The driver can push a null ExecutionContext on to this stack,
and later calls to SBCommandInterpreter::HandleCommand which
don't specify an ExecutionContext can pull an entry from the
stack, resulting in settings that aren't applied.
Differential Revision: https://reviews.llvm.org/D111209
rdar://81489207
This diff introduces a new symbol on-demand which skips
loading a module's debug info unless explicitly asked on
demand. This provides significant performance improvement
for application with dynamic linking mode which has large
number of modules.
The feature can be turned on with:
"settings set symbols.load-on-demand true"
The feature works by creating a new SymbolFileOnDemand class for
each module which wraps the actual SymbolFIle subclass as member
variable. By default, most virtual methods on SymbolFileOnDemand are
skipped so that it looks like there is no debug info for that module.
But once the module's debug info is explicitly requested to
be enabled (in the conditions mentioned below) SymbolFileOnDemand
will allow all methods to pass through and forward to the actual SymbolFile
which would hydrate module's debug info on-demand.
In an internal benchmark, we are seeing more than 95% improvement
for a 3000 modules application.
Currently we are providing several ways to on demand hydrate
a module's debug info:
* Source line breakpoint: matching in supported files
* Stack trace: resolving symbol context for an address
* Symbolic breakpoint: symbol table match guided promotion
* Global variable: symbol table match guided promotion
In all above situations the module's debug info will be on-demand
parsed and indexed.
Some follow-ups for this feature:
* Add a command that allows users to load debug info explicitly while using a
new or existing command when this feature is enabled
* Add settings for "never load any of these executables in Symbols On Demand"
that takes a list of globs
* Add settings for "always load the the debug info for executables in Symbols
On Demand" that takes a list of globs
* Add a new column in "image list" that shows up by default when Symbols On
Demand is enable to show the status for each shlib like "not enabled for
this", "debug info off" and "debug info on" (with a single character to
short string, not the ones I just typed)
Differential Revision: https://reviews.llvm.org/D121631
TraceInstructionDumper::DumpInstructions was becoming too big, so I'm
refactoring it into smaller functions. I also made some static methods proper
instance methods to simplify calls. Other minor improvements are also done.
Differential Revision: https://reviews.llvm.org/D124064
A trace might contain events traced during the target's execution. For
example, a thread might be paused for some period of time due to context
switches or breakpoints, which actually force a context switch. Not only
that, a trace might be paused because the CPU decides to trace only a
specific part of the target, like the address filtering provided by
intel pt, which will cause pause events. Besides this case, other kinds
of events might exist.
This patch adds the method `TraceCursor::GetEvents()`` that returns the
list of events that happened right before the instruction being pointed
at by the cursor. Some refactors were done to make this change simpler.
Besides this new API, the instruction dumper now supports the -e flag
which shows pause events, like in the following example, where pauses
happened due to breakpoints.
```
thread #1: tid = 2717361
a.out`main + 20 at main.cpp:27:20
0: 0x00000000004023d9 leaq -0x1200(%rbp), %rax
[paused]
1: 0x00000000004023e0 movq %rax, %rdi
[paused]
2: 0x00000000004023e3 callq 0x403a62 ; std::vector<int, std::allocator<int> >::vector at stl_vector.h:391:7
a.out`std::vector<int, std::allocator<int> >::vector() at stl_vector.h:391:7
3: 0x0000000000403a62 pushq %rbp
4: 0x0000000000403a63 movq %rsp, %rbp
```
The `dump info` command has also been updated and now it shows the
number of instructions that have associated events.
Differential Revision: https://reviews.llvm.org/D123982
Update the online help text for breakpoint set to be
consistent with respect to the spelling of Objective-C
and fix a few space-related typos.
Differential revision: https://reviews.llvm.org/D124338
Applied clang-tidy modernize-use-override over LLDB and added it to the LLDB .clang-tidy config.
Differential Revision: https://reviews.llvm.org/D123340
The code needs more TLC, but for now I've tried making only the changes
that are necessary to get the tests passing -- postponing the more
invasive changes after I create a more comprehensive test.
In a couple of places I have changed the index-based element accesses to
name-based ones (as these are less sensitive to code perturbations). I'm
not sure why the code was using indexes in the first place, but I've
(manually) tested the change with various libc++ versions, and found no
issues with this approach.
Differential Revision: https://reviews.llvm.org/D124113
Previously, I was assuming that S_DEFRANGE_SUBFIELD_REGISTERs are always in the
increasing order of offset_in_parent until I saw a counter example.
Using `std::map` so that they are sorted by offset_in_parent.
Differential Revision: https://reviews.llvm.org/D124061
Given that you'd never find empty string, just error.
Also add a test that an invalid expr generates an error.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D123793
This adjusts the path iteration - `paths` is a null-terminated sequence
of C strings, creating an array from a single contiguous buffer. We
would previously continue to iterate indefinitely as we did not check if
we had encountered the terminator.
Found by inspection.
This reverts commit af969141fa285157044e34fb6b27963c3278241b because it
didn't have the intended performance benefit to offset the increase in
our (virtual) memory usage.
When a variable is simple type and has 64 bits, the debug info may look like the following when targeting 32bit windows. The variable's content is split into two 32bits registers.
```
480 | S_LOCAL [size = 12] `x`
type=0x0013 (__int64), flags = param
492 | S_DEFRANGE_SUBFIELD_REGISTER [size = 20]
register = EAX, may have no name = true, offset in parent = 0
range = [0001:0073,+7), gaps = []
512 | S_DEFRANGE_SUBFIELD_REGISTER [size = 20]
register = ECX, may have no name = true, offset in parent = 4
range = [0001:0073,+7), gaps = []
```
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D122943
It fixes the following case:
```
0602 line 1 (+1)
0315 code 0x15 (+0x15)
0B2B code 0x20 (+0xB) line 2 (+1)
0602 line 3 (+1)
0311 code 0x31 (+0x11)
...
```
Inline ranges should have following mapping:
`[0x15, 0x20) -> line 1`
`[0x20, 0x31) -> line 2`
Inline line entries:
`0x15, line 1`, `0x20, line 2`, `0x31, line 3`.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D123092
Port the two Process::PrintWarning functions to use the new diagnostic
events through Debugger::ReportWarning. I kept the wrapper function in
the process, but delegated the work to the Module. Consistent with the
current code, the Module ensures the warning is only printed once per
module.
Differential revision: https://reviews.llvm.org/D123698
Currently, lldb crashes when adding a stop hook with --shlib because we
unconditionally use the target in SymbolContextSpecifier::AddSpecification.
This patch prevents the crash and add a test.
rdar://68524781
Differential revision: https://reviews.llvm.org/D123746
Unlike for any of the other shells, we were escaping $ when using tcsh.
There's nothing special about $ in tcsh and this prevents you from
expanding shell variables, one of the main reasons this functionality
exists in the first place.
Differential revision: https://reviews.llvm.org/D123690
The rust demangler has some odd buffer handling code, which will copy
the demangled string into the provided buffer, if it will fit.
Otherwise it uses the allocated buffer it made. But the length of the
incoming buffer will have come from a previous call, which was the
length of the demangled string -- not the buffer size. And of course,
we're unconditionally allocating a temporary buffer in the first
place. So we don't actually get buffer reuse, and we get a memcpy in
somecases.
However, nothing in LLVM ever passes in a non-null pointer. Neither
does anything pass in a status pointer that is then made use of. The
only exercise these have is in the test suite.
So let's just make the rust demangler have the same API as the dlang
demangler.
Reviewed By: tmiasko
Differential Revision: https://reviews.llvm.org/D123420
This patch moves the platform creation and selection logic into the
per-debugger platform lists. I've tried to keep functional changes to a
minimum -- the main (only) observable difference in this change is that
APIs, which select a platform by name (e.g.,
Debugger::SetCurrentPlatform) will not automatically pick up a platform
associated with another debugger (or no debugger at all).
I've also added several tests for this functionality -- one of the
pleasant consequences of the debugger isolation is that it is now
possible to test the platform selection and creation logic.
This is a product of the discussion at
<https://discourse.llvm.org/t/multiple-platforms-with-the-same-name/59594>.
Differential Revision: https://reviews.llvm.org/D120810
LLDB supports having globbing regexes in the process launch arguments
that will be resolved using the user's shell. This requires that we pass
the launch args to the shell and then read back the expanded arguments
using LLDB's argdumper utility.
As the shell will not just expand the globbing regexes but all special
characters, we need to escape all non-globbing charcters such as $, &,
<, >, etc. as those otherwise are interpreted and removed in the step
where we expand the globbing characters. Also because the special
characters are shell-specific, LLDB needs to maintain a list of all the
characters that need to be escaped for each specific shell.
This patch adds the missing semicolon character to the escape list for
all currently supported shells. Without this having a semicolon in the
binary path or having a semicolon in the launch arguments will cause the
argdumping process to fail. E.g., lldb -- ./calc "a;b" was failing
before but is working now.
Fixes rdar://55776943
Differential revision: https://reviews.llvm.org/D104629
Something ugly I did was to report the trace buffer size to the DecodedThread,
which is later used as part of the `dump info` command. Instead of doing that,
we can just directly ask the trace for the raw buffer and print its size.
I thought about not asking for the entire trace but instead just for its size,
but in this case, as our traces as not extremely big, I prefer to ask for the
entire trace, ensuring it could be fetched, and then print its size.
Differential Revision: https://reviews.llvm.org/D123358
I'm adding two new classes that can be used to measure the duration of long
tasks as process and thread level, e.g. decoding, fetching data from
lldb-server, etc. In this first patch, I'm using it to measure the time it takes
to decode each thread, which is printed out with the `dump info` command. In a
later patch I'll start adding process-level tasks and I might move these
classes to the upper Trace level, instead of having them in the intel-pt
plugin. I might need to do that anyway in the future when we have to
measure HTR. For now, I want to keep the impact of this change minimal.
With it, I was able to generate the following info of a very big trace:
```
(lldb) thread trace dump info Trace technology: intel-pt
thread #1: tid = 616081
Total number of instructions: 9729366
Memory usage:
Raw trace size: 1024 KiB
Total approximate memory usage (excluding raw trace): 123517.34 KiB
Average memory usage per instruction (excluding raw trace): 13.00 bytes
Timing:
Decoding instructions: 1.62s
Errors:
Number of TSC decoding errors: 0
```
As seen above, it took 1.62 seconds to decode 9.7M instructions. This is great
news, as we don't need to do any optimization work in this area.
Differential Revision: https://reviews.llvm.org/D123357
This means we don't have to remember to update this code as much.
This is all tested in lldb/test/Shell/Commands/command-disassemble-aarch64-extensions.s
which I added previously.
We don't have a way to get the latest base architecture yet
so that remains manual. Having all the extensions specified
will probably be equivalent to the latest architecture version
in any case.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D123582
Places calling LoadModuleAtAddress() already call ModulesDidLoad()
after a loop calling LoadModuleAtAddress(), so it's not necessary
to call it from there, and the batched ModulesDidLoad() may be
more efficient than this place calling it one after one.
This also makes the ModuleLoadedNotifys test pass on Linux now that
the duplicates no longer bring down the average of modules notified
per call.
Differential Revision: https://reviews.llvm.org/D123128
Don't report progress events in the REPL. Most of the progress events
are debugger specific which are useful when you're debugging, but not so
much when you're waiting for the next line to be executed in the REPL.
This patch disables reporting of progress events when in REPL mode.
rdar://91502950
Differential revision: https://reviews.llvm.org/D123426
Move them to the only source file that included RegisterInfos_arm64.h
that actually used these variables.
This silences warnings like these:
In file included from lldb/source/Plugins/Instruction/ARM64/EmulateInstructionARM64.cpp:42:
lldb/source/Plugins/Process/Utility/RegisterInfos_arm64.h:790:35: warning: ‘g_register_infos_mte’ defined but not used [-Wunused-variable]
790 | static lldb_private::RegisterInfo g_register_infos_mte[] = {
| ^~~~~~~~~~~~~~~~~~~~
lldb/source/Plugins/Process/Utility/RegisterInfos_arm64.h:787:35: warning: ‘g_register_infos_pauth’ defined but not used [-Wunused-variable]
787 | static lldb_private::RegisterInfo g_register_infos_pauth[] = {
| ^~~~~~~~~~~~~~~~~~~~~~
Differential Revision: https://reviews.llvm.org/D123206
Clang is adding a feature to ObjC code generation, where instead of calling
objc_msgSend directly with an object & selector, it generates a stub that
gets passed only the object and the stub figures out the selector.
This patch adds support for following that dispatch method into the implementation
function.
Some parts of the code have to distinguish between live and postmortem threads
to figure out how to get some data, e.g. thread trace buffers. This makes the
code less generic and more error prone. An example of that is that we have
two different decoders: LiveThreadDecoder and PostMortemThreadDecoder. They
exist because getting the trace bufer is different for each case.
The problem doesn't stop there. Soon we'll have even more kinds of data, like
the context switch trace, whose fetching will be different for live and post-
mortem processes.
As a way to fix this, I'm creating a common API for accessing thread data,
which is able to figure out how to handle the postmortem and live cases on
behalf of the caller. As a result of that, I was able to eliminate the two
decoders and unify them into a simpler one. Not only that, our TraceSave
functionality only worked for live threads, but now it can also work for
postmortem processes, which might be useful now, but it might in the future.
This common API is OnThreadBinaryDataRead. More information in the inline
documentation.
Differential Revision: https://reviews.llvm.org/D123281
As we soon will need to decode multiple raw traces for the same thread,
having a class that encapsulates the decoding of a single raw trace is
a stepping stone that will make the coming features easier to implement.
So, I'm creating a LibiptDecoder class with that purpose. I refactored
the code and it's now much more readable. Besides that, more comments
were added. With this new structure, it's also easier to implement unit
tests.
Differential Revision: https://reviews.llvm.org/D123106
If the variables view shows a variable that is a struct that has
MightHaveChildren(), the expand diamond is shown, but if trying to expand
it and it's not possible (e.g. incomplete type), remove the expand diamond
to visualize that it can't be in fact expanded. Otherwise it feels kinda
weird that a tree item cannot be expanded even though it "should".
I guess the MightHaveChildren() checking means that GetChildren() may
be expensive, so also do not call it for rows that are not expanded.
Differential Revision: https://reviews.llvm.org/D123008
