This reverts commit 7f230feeeac8a67b335f52bd2e900a05c6098f20.
Breaks CodeGenCUDA/link-device-bitcode.cu in check-clang,
and many LLVM tests, see comments on https://reviews.llvm.org/D121169
InstrRefBasedLDV used to try and determine which values are in which
registers using a lattice approach; however this is hard to understand, and
broken in various ways. This patch replaces that approach with a standard
SSA approach using existing LLVM utilities. PHIs are placed at dominance
frontiers; value propagation then eliminates un-necessary PHIs.
This patch also adds a bunch of unit tests that should cover many of the
weirder forms of control flow.
Differential Revision: https://reviews.llvm.org/D110173
Based on the reasoning of D53903, register operands of DBG_VALUE are
invariably treated as RegState::Debug operands. This change enforces
this invariant as part of MachineInstr::addOperand so that all passes
emit this flag consistently.
RegState::Debug is inconsistently set on DBG_VALUE registers throughout
LLVM. This runs the risk of a filtering iterator like
MachineRegisterInfo::reg_nodbg_iterator to process these operands
erroneously when not parsed from MIR sources.
This issue was observed in the development of the llvm-mos fork which
adds a backend that relies on physical register operands much more than
existing targets. Physical RegUnit 0 has the same numeric encoding as
$noreg (indicating an undef for DBG_VALUE). Allowing debug operands into
the machine scheduler correlates $noreg with RegUnit 0 (i.e. a collision
of register numbers with different zero semantics). Eventually, this
causes an assert where DBG_VALUE instructions are prohibited from
participating in live register ranges.
Reviewed By: MatzeB, StephenTozer
Differential Revision: https://reviews.llvm.org/D110105
LLVM (llvmorg-14-init) under Debian sid using latest gcc (Debian
10.3.0-9) 10.3.0 fails due to ambiguous overload on operators == and !=:
/root/src/llvm/src/llvm/tools/obj2yaml/elf2yaml.cpp:212:22:
error: ambiguous overload for 'operator!='
(operand types are 'llvm::ELFYAML::ELF_SHF' and 'int')
/root/src/llvm/src/llvm/tools/obj2yaml/elf2yaml.cpp:204:32:
error: ambiguous overload for 'operator!='
(operand types are 'const llvm::yaml::Hex64' and 'int')
/root/src/llvm/src/llvm/lib/CodeGen/LiveDebugValues/VarLocBasedImpl.cpp:629:35:
error: ambiguous overload for 'operator=='
(operand types are 'const uint64_t' {aka 'const long unsigned int'} and
'llvm::Register')
Reviewed by: StephenTozer, jmorse, Higuoxing
Differential Revision: https://reviews.llvm.org/D109534
When handling register spill for indirect debug value LiveDebugValues pass doesn't add
DW_OP_deref operator which may in some cases cause debugger to return value address, instead
of value while machine register holding that address is spilled.
Differential revision: https://reviews.llvm.org/D109142
If we encounter a new debug value, describing the same parameter,
we should stop tracking the parameter's Entry Value. At that point,
in some cases, the Transfer which uses the parameter's Entry Value,
is already emitted. Thanks to the RemoveRedundantDebugValues pass,
many problems with incorrect instruction order and number of DBG_VALUEs
are fixed. However, we still cannot rely on the rule that each new
debug value is set by the previous non-debug instruction in Machine
Basic Block.
When new parameter debug value triggers removal of Backup Entry Value
for the same parameter, do the cleanup of Transfers emitted from Backup
Entry Values. Get the Transfer Instruction which created the new debug
value and search for debug values already emitted from the to-be-deleted
Backup Entry Value and attached to the Transfer Instruction. If found,
delete the Transfer and remove "primary" Entry Value Var Loc from
OpenRanges.
This patch fixes PR47628.
Patch by Nikola Tesic.
Differential revision: https://reviews.llvm.org/D106856
This reapplies 54a61c94f93, its follow up in 547b712500e, which were
reverted 95fe61e63954. Original commit message:
VarLoc based LiveDebugValues will abandon variable location propagation if
there are too many blocks and variable assignments in the function. If it
didn't, and we had (say) 1000 blocks and 1000 variables in scope, we'd end
up with 1 million DBG_VALUEs just at the start of blocks.
Instruction-referencing LiveDebugValues should honour this limitation too
(because the same limitation applies to it). Hoist the relevant command
line options into LiveDebugValues.cpp and pass it down into the
implementation classes as an argument to ExtendRanges. I've duplicated all
the run-lines in live-debug-values-cutoffs.mir to have an
instruction-referencing flavour.
Differential Revision: https://reviews.llvm.org/D107823
VarLoc based LiveDebugValues will abandon variable location propagation if
there are too many blocks and variable assignments in the function. If it
didn't, and we had (say) 1000 blocks and 1000 variables in scope, we'd end
up with 1 million DBG_VALUEs just at the start of blocks.
Instruction-referencing LiveDebugValues should honour this limitation too
(because the same limitation applies to it). Hoist the relevant command
line options into LiveDebugValues.cpp and pass it down into the
implementation classes as an argument to ExtendRanges. I've duplicated all
the run-lines in live-debug-values-cutoffs.mir to have an
instruction-referencing flavour.
Differential Revision: https://reviews.llvm.org/D107823
This patch implements DBG_VALUE_LIST handling to the LiveDebugValues pass. This
is a substantial change, and makes a few fundamental changes to the existing
logic.
We still use the basic model of a VarLocMap that is indexed by a LocIndex, with
a VarLocSet (a CoalescingBitVector underneath) giving us efficient lookups of
existing variable locations for a given location type. The main change is that
the VarLocMap may contain a given VarLoc multiple times (once for each unique
location operand), so that a VarLoc can be looked up from any of the registers
that it uses. This means that each VarLoc has multiple corresponding LocIndexes;
to allow us to iterate through the set of VarLocs (previously we would iterate
through the VarLocSet), we now also maintain a single entry in the VarLocMap
that contains every VarLoc exactly once.
The VarLoc class itself is also changed; this change is much simpler,
refactoring out location-specific members into a MachineLocation class and
adding a vector of these locations.
Differential Revision: https://reviews.llvm.org/D83890
The issue was introduced in commit rG84a1120943a651184bae507fed5d648fee381ae4
and would cause a VarLoc's StackOffset to be compared with its own, instead of
the StackOffset from the other VarLoc. This patch fixes that.
This patch fixes the two LiveDebugValues implementations
(InstrRef/VarLoc)Based to handle cases where the StackOffset contains
both a fixed and scalable component.
This depends on the `TargetRegisterInfo::prependOffsetExpression` being
added in D90020. Feel free to leave comments on that patch if you have them.
Reviewed By: djtodoro, jmorse
Differential Revision: https://reviews.llvm.org/D90046
To accommodate frame layouts that have both fixed and scalable objects
on the stack, describing a stack location or offset using a pointer + uint64_t
is not sufficient. For this reason, we've introduced the StackOffset class,
which models both the fixed- and scalable sized offsets.
The TargetFrameLowering::getFrameIndexReference is made to return a StackOffset,
so that this can be used in other interfaces, such as to eliminate frame indices
in PEI or to emit Debug locations for variables on the stack.
This patch is purely mechanical and doesn't change the behaviour of how
the result of this function is used for fixed-sized offsets. The patch adds
various checks to assert that the offset has no scalable component, as frame
offsets with a scalable component are not yet supported in various places.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D90018
This patch renames the current LiveDebugValues class to "VarLocBasedLDV"
and removes the pass-registration code from it. It creates a separate
LiveDebugValues class that deals with pass registration and management,
that calls through to VarLocBasedLDV::ExtendRanges when
runOnMachineFunction is called. This is done through the "LDVImpl"
abstract class, so that a future patch can install the new
instruction-referencing LiveDebugValues implementation and have it
picked at runtime.
No functional change is intended, just shuffling responsibilities.
Differential Revision: https://reviews.llvm.org/D83046
This is a pure file move of LiveDebugValues.cpp ahead of the pass being
refactored, with an experimental new implementation to follow.
The motivation for these changes can be found here:
http://lists.llvm.org/pipermail/llvm-dev/2020-June/142368.html
And the other related changes can be found in the phabricator stack for
this revision:
Differential Revision: https://reviews.llvm.org/D83304
