Not sure this is the best fix, but it saves an instruction for certain
constructs involving variable shifts.
Differential Revision: https://reviews.llvm.org/D55572
llvm-svn: 351768
Fixes two problems with GCNHazardRecognizer:
1. It only scans up to 5 instructions emitted earlier.
2. It does not take control flow into account. An earlier instruction
from the previous basic block is not necessarily a predecessor.
At the same time a real predecessor block is not scanned.
The patch provides a way to distinguish between scheduler and
hazard recognizer mode. It is OK to work with emitted instructions
in the scheduler because we do not really know what will be emitted
later and its order. However, when pass works as a hazard recognizer
the schedule is already finalized, and we have full access to the
instructions for the whole function, so we can properly traverse
predecessors and their instructions.
Differential Revision: https://reviews.llvm.org/D56923
llvm-svn: 351759
D56777 added +1cy local forwarding penalty for horizontal operations, but this penalty only affects sse2/xmm variants, the mmx variants don't suffer the penalty.
Confirmed with @andreadb
llvm-svn: 351755
These are copied from the sibling x86 file. I'm not sure which
of the current outputs (if any) is considered optimal, but
someone more familiar with AArch may want to take a look.
llvm-svn: 351754
The regression test is reduced from the example shown in D56281.
This does raise a question as noted in the test file: do we want
to handle this pattern? I don't have a motivating example for
that on x86 yet, but it seems like we could have that pattern
there too, so we could avoid the back-and-forth using a shuffle.
llvm-svn: 351753
r327630 introduced new write definitions for float/vector loads.
Before that revision, WriteLoad was used by both integer/float (scalar/vector)
load. So, WriteLoad had to conservatively declare a latency to 5cy. That is
because the load-to-use latency for float/vector load is 5cy.
Now that we have dedicated writes for float/vector loads, there is no reason why
we should keep the latency of WriteLoad to 5cy. At the moment, WriteLoad is only
used by scalar integer loads only; we can assume an optimstic 3cy latency for
them.
This patch changes that latency from 5cy to 3cy, and regenerates the affected
scheduling/mca tests.
Differential Revision: https://reviews.llvm.org/D56922
llvm-svn: 351742
This updates the AVR Select8/Select16 expansion code so that, when
inserting the two basic blocks for true and false conditions, any
existing fallthrough on the previous block is preserved.
Prior to this patch, if the block before the Select pseudo fell through
to the subsequent block, two new basic blocks would be inserted at the
prior fallthrough point, changing the fallthrough destination.
The predecessor or successor lists were not updated, causing the
BranchFolding pass at -O1 and above the rearrange basic blocks, causing
an infinite loop. Not to mention the unconditional fallthrough to the
true block is incorrect in of itself.
This patch modifies the Select8/16 expansion so that, if inserting true
and false basic blocks at a fallthrough point, the implicit branch is
preserved by means of an explicit, unconditional branch to the previous
fallthrough destination.
Thanks to Carl Peto for reporting this bug.
This fixes avr-rust bug https://github.com/avr-rust/rust/issues/123.
llvm-svn: 351721
This reverts commit r351718.
Carl pointed out that the unit test could be improved.
This patch will be recommitted once the test is made more resilient.
llvm-svn: 351719
This updates the AVR Select8/Select16 expansion code so that, when
inserting the two basic blocks for true and false conditions, any
existing fallthrough on the previous block is preserved.
Prior to this patch, if the block before the Select pseudo fell through
to the subsequent block, two new basic blocks would be inserted at the
prior fallthrough point, changing the fallthrough destination.
The predecessor or successor lists were not updated, causing the
BranchFolding pass at -O1 and above the rearrange basic blocks, causing
an infinite loop. Not to mention the unconditional fallthrough to the
true block is incorrect in of itself.
This patch modifies the Select8/16 expansion so that, if inserting true
and false basic blocks at a fallthrough point, the implicit branch is
preserved by means of an explicit, unconditional branch to the previous
fallthrough destination.
Thanks to Carl Peto for reporting this bug.
This fixes avr-rust bug https://github.com/avr-rust/rust/issues/123.
llvm-svn: 351718
There is a combine that was hiding these tests
not actually testing what they should be, although
they were producing the expected end result.
llvm-svn: 351698
This causes a couple of changes in the upgrade tests as signed/unsigned eq/ne are equivalent and we constant fold true/false codes, these changes are the same as what we already do for avx512 cmp/ucmp.
Noticed while cleaning up vector integer comparison costs for PR40376.
llvm-svn: 351697
This was crashing in the predicate function assuming the value
is a vector.
Copy more of what AArch64 uses. This probably needs more refinement
later, but I don't exactly understand what it means in some cases,
particularly since any legalization for these seems to be missing.
llvm-svn: 351693
We were upgrading these to the new style VPCOM/VPCOMU intrinsics (which includes the condition code immediate), but we'll be getting rid of those shortly, so convert these to generics first.
This causes a couple of changes in the upgrade tests as signed/unsigned eq/ne are equivalent and we constant fold true/false codes, these changes are the same as what we already do for avx512 cmp/ucmp.
Noticed while cleaning up vector integer comparison costs for PR40376.
llvm-svn: 351690
These intrinsics can always be replaced with generic integer comparisons without any regression in codegen, even for -O0/-fast-isel cases.
Noticed while cleaning up vector integer comparison costs for PR40376.
A future commit will remove/autoupgrade the existing VPCOM/VPCOMU llvm intrinsics.
llvm-svn: 351688
Prior to this patch, the AVR::LDWRdPtr instruction was always lowered to
instructions of this pattern:
ld $GPR8, [PTR:XYZ]+
ld $GPR8, [PTR]+1
This has a problem; the [PTR] is incremented in-place once, but never
decremented.
Future uses of the same pointer will use the now clobbered value,
leading to the pointer being incorrect by an offset of one.
This patch modifies the expansion code of the LDWRdPtr pseudo
instruction so that the pointer variable is not silently clobbered in
future uses in the same live range.
Bug first reported by Keshav Kini.
Patch by Kaushik Phatak.
llvm-svn: 351673
This reverts commit r351544.
In that commit, I had mistakenly misattributed the issue submitter as
the patch author, Kaushik Phatak.
The patch will be recommitted immediately with the correct attribution.
llvm-svn: 351672
The existing tests already show a sub-optimal transform,
but this should make it clear that we can't just match
an 'and' op when creating movmsk instructions.
llvm-svn: 351590
This sends these intrinsics through isel in a much more normal way. This should allow addressing mode matching in isel to make better use of the displacement field.
Differential Revision: https://reviews.llvm.org/D56827
llvm-svn: 351570
Prior to this patch, the AVR::LDWRdPtr instruction was always lowered to
instructions of this pattern:
ld $GPR8, [PTR:XYZ]+
ld $GPR8, [PTR]+1
This has a problem; the [PTR] is incremented in-place once, but never
decremented.
Future uses of the same pointer will use the now clobbered value,
leading to the pointer being incorrect by an offset of one.
This patch modifies the expansion code of the LDWRdPtr pseudo
instruction so that the pointer variable is not silently clobbered in
future uses in the same live range.
Patch by Keshav Kini.
llvm-svn: 351544
We should not pre-scheduled the node has ADJCALLSTACKDOWN parent,
or else, when bottom-up scheduling, ADJCALLSTACKDOWN and
ADJCALLSTACKUP may hold CallResource too long and make other
calls can't be scheduled. If there's no other available node
to schedule, the scheduler will try to rename the register by
creating copy to avoid the conflict which will fail because
CallResource is not a real physical register.
llvm-svn: 351527
This change modifies the LLVM ISel lowering settings so that
8-bit/16-bit multiplication is expanded to calls into the compiler
runtime library if the MCU being targeted does not support
multiplication in hardware.
Before this, MUL instructions would be generated on CPUs like the
ATtiny85, triggering a CPU reset due to an illegal instruction at
runtime.
First raised in https://github.com/avr-rust/rust/issues/124.
llvm-svn: 351523
The callee address is added as an optional operand (MCSymbol) in
AdjustInstrPostInstrSelection() and then used by asm printer to insert:
'.reloc tmplabel, R_MIPS_JALR, symbol
tmplabel:'.
Controlled with '-mips-jalr-reloc', default is true.
Differential revision: https://reviews.llvm.org/D56694
llvm-svn: 351485
EXPENSIVE_CHECKS buildbots are failing due to r351404.
Add x1 as live in to the funclet basic block for SEH funclets, as well as
-verify-machineinstrs to the test case that triggered the failure.
llvm-svn: 351472
Allow varargs functions to be called, both in arm and thumb mode. This
boils down to choosing the correct calling convention, which we can
easily test by making sure arm_aapcscc is used instead of
arm_aapcs_vfpcc when the callee is variadic.
llvm-svn: 351424
In order to support codegen RV64A, this patch:
* Introduces masked atomics intrinsics for atomicrmw operations and cmpxchg
that use the i64 type. These are ultimately lowered to masked operations
using lr.w/sc.w, but we need to use these alternate intrinsics for RV64
because i32 is not legal
* Modifies RISCVExpandPseudoInsts.cpp to handle PseudoAtomicLoadNand64 and
PseudoCmpXchg64
* Modifies the AtomicExpandPass hooks in RISCVTargetLowering to sext/trunc as
needed for RV64 and to select the i64 intrinsic IDs when necessary
* Adds appropriate patterns to RISCVInstrInfoA.td
* Updates test/CodeGen/RISCV/atomic-*.ll to show RV64A support
This ends up being a fairly mechanical change, as the logic for RV32A is
effectively reused.
Differential Revision: https://reviews.llvm.org/D53233
llvm-svn: 351422
There are cases where we have multiple epilogues that have the exact same unwind
code sequence. In that case, the epilogues can share the same unwind codes in
the .xdata section. This should get us past the assert "SEH unwind data
splitting not yet implemented" in many cases.
We still need to add support for generating multiple .pdata/.xdata sections for
those functions that need to be split into fragments.
Differential Revision: https://reviews.llvm.org/D56813
llvm-svn: 351421
