This is primarily meant to address the issue identified in #109182,
around incorrect usage of `-fsycl-is-device`; we now have AMDGCN
flavoured SPIR-V which retains the desired behaviour around the default
AS and does not depend on the SYCL language being enabled to do so.
Overall, there are three changes:
1. We unconditionally use the `SPIRDefIsGen` AS map for AMDGCNSPIRV
target, as there is no case where the hack of setting default to private
would be desirable, and it can be used for languages other than OCL/HIP;
2. We implement `SPIRVTargetCodeGenInfo::getGlobalVarAddressSpace` for
SPIR-V in general, because otherwise using it from languages other than
HIP or OpenCL would yield 0, incorrectly;
3. We remove the incorrect usage of `-fsycl-is-device`.
This patch enables the following command line flags for RISC-V targets:
+ `-fcf-protection=branch` turns on forward-edge control-flow integrity conditioning
+ `-mcf-branch-label-scheme=unlabeled|func-sig` selects the label scheme used in the forward-edge CFI conditioning
This reverts commit e39205654dc11c50bd117e8ccac243a641ebd71f.
There are further discussions in
https://github.com/llvm/llvm-project/pull/70976, happening for past two
weeks. Since there were no responses for couple weeks now, reverting
until author is back.
- Remove dependence on `STLExtras.h`.
- Remove unused header inclusions.
- Make `count` use `contains` for deduplication.
- Replace hand-written linear scans on Vector by `std::find`.
This change adds support for correctly lowering the `__scoped` Clang
builtins, and corresponding scoped LLVM instructions. These were
previously unconditionally lowered to Device scope, which is possibly incorrect.
Furthermore, the default / implicit scope is changed from Device (an
OpenCL assumption) to AllSvmDevices (aka System), since the SPIR-V BE is not
OpenCL specific / can ingest IR coming from other language front-ends. OpenCL
defaulting to Device scope is now reflected in the front-end handling of atomic
ops, which seems preferable.
For some reason `__BPF_FEATURE_MAY_GOTO` is available for CPUs v{2,3,4}
but is not available for CPU v1. This limitation is arbitrary:
- the instruction is never produced by LLVM backend;
- on Linux Kernel side this instruction is available in kernels that
also support CPUv4.
Hence, it is more consistent to either always allow
`__BPF_FEATURE_MAY_GOTO` or only allow it for CPUv4.
Only allow GPR registers and verify the size is the same as XLen.
This fixes the crash seen in #109588 by making it a frontend error.
gcc does accept the code so we may need to consider if we can fix the
backend. Some other targets I tried appear to have similar issues so it
might not be straightforward to fix.
This adds support for:
* `muslabin32` (MIPS N32)
* `muslabi64` (MIPS N64)
* `muslf32` (LoongArch ILP32F/LP64F)
* `muslsf` (LoongArch ILP32S/LP64S)
As we start adding glibc/musl cross-compilation support for these
targets in Zig, it would make our life easier if LLVM recognized these
triples. I'm hoping this'll be uncontroversial since the same has
already been done for `musleabi`, `musleabihf`, and `muslx32`.
I intentionally left out a musl equivalent of `gnuf64` (LoongArch
ILP32D/LP64D); my understanding is that Loongson ultimately settled on
simply `gnu` for this much more common case, so there doesn't *seem* to
be a particularly compelling reason to add a `muslf64` that's basically
deprecated on arrival.
Note: I don't have commit access.
Introduce changes necessary for UEFI X86_64 target Clang driver.
Addressed the review comments originally suggested in Phabricator.
Differential Revision: https://reviews.llvm.org/D159541
This patch adds an IsText parameter to the following functions
openFileForRead, getBufferForFile, getBufferForFileImpl and determines
whether a file is text by querying the file tag on z/OS. The default is
set to OF_Text instead of OF_None, this change in value does not affect
any other platforms other than z/OS.
Resolves: #70930 (and probably latest comments from clangd/clangd#251)
by fixing racing for the shared DiagStorage value which caused messing with args inside the storage and then formatting the following message with getArgSInt(1) == 2:
def err_module_odr_violation_function : Error<
"%q0 has different definitions in different modules; "
"%select{definition in module '%2'|defined here}1 "
"first difference is "
which causes HandleSelectModifier to go beyond the ArgumentLen so the recursive call to FormatDiagnostic was made with DiagStr > DiagEnd that leads to infinite while (DiagStr != DiagEnd).
The Main Idea:
Reuse the existing DiagStorageAllocator logic to make all DiagnosticBuilders having independent states.
Also, encapsulating the rest of state (e.g. ID and Loc) into DiagnosticBuilder.
The last attempt failed -
https://github.com/llvm/llvm-project/pull/108187#issuecomment-2353122096
so was reverted - #108838
As captured in issue #108044, HLSL 202x is the target language mode for
conformance for Clang. Earlier language modes will be a best effort and
prioritized after 2020x. To make this easier and reduce our testing
complexity we want to make 202x the default language mode now, and align
all earlier modes to match 202x (except where we explicitly deviate).
This change has the following concrete changes:
* All older language modes gain `CPlusPlus11` as a base
* The default language mode for HLSL sources is changed to 202x
* A few test cases are updated to resolve differences in generated
diagnostics.
Second to last change for #108044
Resolves: #70930 (and probably latest comments from
https://github.com/clangd/clangd/issues/251)
by fixing racing for the shared `DiagStorage` value which caused messing
with args inside the storage and then formatting the following message
with `getArgSInt(1)` == 2:
```
def err_module_odr_violation_function : Error<
"%q0 has different definitions in different modules; "
"%select{definition in module '%2'|defined here}1 "
"first difference is "
```
which causes `HandleSelectModifier` to go beyond the `ArgumentLen` so
the recursive call to `FormatDiagnostic` was made with `DiagStr` >
`DiagEnd` that leads to infinite `while (DiagStr != DiagEnd)`.
**The Main Idea:**
Reuse the existing `DiagStorageAllocator` logic to make all
`DiagnosticBuilder`s having independent states.
Also, encapsulating the rest of state (e.g. ID and Loc) into
`DiagnosticBuilder`.
**TODO (if it will be requested by reviewer):**
- [x] add a test (I have no idea how to turn a whole bunch of my
proprietary code which leads `clangd` to OOM into a small public
example.. probably I must try using
[this](https://github.com/llvm/llvm-project/issues/70930#issuecomment-2209872975)
instead)
- [x] [`Diag.CurDiagID !=
diag::fatal_too_many_errors`](https://github.com/llvm/llvm-project/pull/108187#pullrequestreview-2296395489)
- [ ] ? get rid of `DiagStorageAllocator` at all and make
`DiagnosticBuilder` having they own `DiagnosticStorage` coz it seems
pretty small so should fit the stack for short-living
`DiagnosticBuilder` instances
OpenCL has a reserved operator (^^), the use of which was diagnosed as
an error (735c6cdebdcd4292928079cb18a90f0dd5cd65fb). However, OpenCL
also encourages working with the blocks language extension. This token
has a parsing ambiguity as a result. Consider:
unsigned x=0;
unsigned y=x^^{return 0;}();
This should result in y holding the value zero (0^0) through an
immediately invoked block call as the right-hand side of the xor
operator. However, it causes errors instead because of this reserved
token: https://godbolt.org/z/navf7jTv1
This token is still reserved in OpenCL 3.0, so we still wish to issue a
diagnostic for its use. However, we do not need to create a token for an
extension point that's been unused for about a decade. So this patch
moves the diagnostic from a parsing diagnostic to a lexing diagnostic
and no longer forms a single token. The diagnostic behavior is slightly
worse as a result, but still seems acceptable.
Part of the reason this is coming up is because WG21 is considering
using ^^ as a token for reflection, so this token may come back in the
future.
This reverts commit e7f782e7481cea23ef452a75607d3d61f5bd0d22.
This had UBSan failures:
[----------] 1 test from ConfigCompileTests
[ RUN ] ConfigCompileTests.DiagnosticSuppression
Config fragment: compiling <unknown>:0 -> 0x00007B8366E2F7D8 (trusted=false)
/usr/local/google/home/fmayer/large/llvm-project/llvm/include/llvm/ADT/IntrusiveRefCntPtr.h:203:33: runtime error: reference binding to null pointer of type 'clang::DiagnosticIDs'
UndefinedBehaviorSanitizer: undefined-behavior /usr/local/google/home/fmayer/large/llvm-project/llvm/include/llvm/ADT/IntrusiveRefCntPtr.h:203:33
Pull Request: https://github.com/llvm/llvm-project/pull/108645
This change adds a new HLSL 202y language mode. Currently HLSL 202y is
planned to add `auto` and `constexpr`.
This change updates extension diagnostics to state that lambadas are a
"clang HLSL" extension (since we have no planned release yet to include
them), and that `auto` is a HLSL 202y extension when used in earlier
language modes.
Note: This PR does temporarily work around some differences between HLSL
2021 and 202x in Clang by changing test cases to explicitly specify
202x. A subsequent PR will update 2021's language flags to match 202x.
This patch enable the function multiversion(FMV) and `target_clones`
attribute for RISC-V target.
The proposal of `target_clones` syntax can be found at the
https://github.com/riscv-non-isa/riscv-c-api-doc/pull/48 (which has
landed), as modified by the proposed
https://github.com/riscv-non-isa/riscv-c-api-doc/pull/85 (which adds the
priority syntax).
It supports the `target_clones` function attribute and function
multiversioning feature for RISC-V target. It will generate the ifunc
resolver function for the function that declared with target_clones
attribute.
The resolver function will check the version support by runtime object
`__riscv_feature_bits`.
For example:
```
__attribute__((target_clones("default", "arch=+ver1", "arch=+ver2"))) int bar() {
return 1;
}
```
the corresponding resolver will be like:
```
bar.resolver() {
__init_riscv_feature_bits();
// Check arch=+ver1
if ((__riscv_feature_bits.features[0] & BITMASK_OF_VERSION1) == BITMASK_OF_VERSION1) {
return bar.arch=+ver1;
} else {
// Check arch=+ver2
if ((__riscv_feature_bits.features[0] & BITMASK_OF_VERSION2) == BITMASK_OF_VERSION2) {
return bar.arch=+ver2;
} else {
// Default
return bar.default;
}
}
}
```
Clang's `-cc1 -print-stats` shows lots of useful internal data including
basic `FileManager` stats. Since this layer caches some results, it is
unclear how that information translates to actual filesystem accesses.
This PR uses `llvm::vfs::TracingFileSystem` to provide that missing
information.
Similar mechanism is implemented for `clang-scan-deps`'s verbose mode
(`-v`). IO contention proved to be a real bottleneck a couple of times
already and this new feature should make those easier to detect in the
future. The tracing VFS is inserted below the caching FS and above the
real FS.
This patch makes unsupported target attributes emit a warning and ignore
the target attribute during semantic checks. The changes include:
1. Adding the RISCVTargetInfo::isValidFeatureName function.
2. Rejecting non-full-arch strings in the handleFullArchString function.
3. Adding test cases to demonstrate the warning behavior.
Before llvm20, (void)__sync_fetch_and_add(...) always generates locked
xadd insns. In linux kernel upstream discussion [1], it is found that
for arm64 architecture, the original semantics of
(void)__sync_fetch_and_add(...), i.e., __atomic_fetch_add(...), is
preferred in order for jit to emit proper native barrier insns.
In llvm commits [2] and [3], (void)__sync_fetch_and_add(...) will
generate the following insns:
- for cpu v1/v2: locked xadd insns to keep backward compatibility
- for cpu v3/v4: __atomic_fetch_add() insns
To ensure proper barrier semantics for (void)__sync_fetch_and_add(...),
cpu v3/v4 is recommended.
This patch enables cpu=v3 as the default cpu version. For users wanting
to use cpu v1, -mcpu=v1 needs to be explicitly added to clang/llc
command line.
[1]
https://lore.kernel.org/bpf/ZqqiQQWRnz7H93Hc@google.com/T/#mb68d67bc8f39e35a0c3db52468b9de59b79f021f
[2] https://github.com/llvm/llvm-project/pull/101428
[3] https://github.com/llvm/llvm-project/pull/106494
This patch aims to replace the target attribute override mechanism based
on `__RISCV_TargetAttrNeedOverride` with the insertion of several
negative target features
When the target attribute uses the full architecture string
("arch=rv64gc") or specifies the CPU ("cpu=rocket-rv64") as the version,
it will override the module-level target feature. Currently, this
mechanism is implemented by inserting `__RISCV_TargetAttrNeedOverride`
as a dummy target feature immediately before the target attribute's
feature.
```
module target features + __RISCV_TargetAttrNeedOverride + target attribute's feature
```
The RISCVTargetInfo::initFeatureMap function will remove the "module
target features" and use only the "target attribute's features".
This patch changes the process as follows:
```
module target features + negative target feature for all supported extension + target attribute's feature
```
The `module target features` will be disable by `negative target feature
for all supported extension` in `TargetInfo::initFeatureMap`
CompilerInstance can re-use same SourceManager across multiple
frontendactions. During this process it calls
`SourceManager::clearIDTables` to reset any caches based on FileIDs.
It didn't reset IncludeLocMap, resulting in wrong include locations for
workflows that triggered multiple frontend-actions through same
CompilerInstance.
Thread init guards are generated for local static variables when using
the Microsoft CXX ABI. This ABI is also used for HLSL generation, but
DXIL doesn't need the corresponding _Init_thread_header/footer calls and
doesn't really have a way to handle them in its output targets.
This modifies the language ops when the target is DXIL to exclude this
so that they won't be generated and an alternate guardvar method is used
that is compatible with the usage.
Done to facilitate testing for #89806, but isn't really related
Add libclang function `clang_isBeforeInTranslationUnit` to allow checking the order between two source locations.
Simplify the `SourceRange.__contains__` implementation using this new function.
Add tests for `SourceRange.__contains__` and the newly added functionality.
Fixes#22617Fixes#52827
We emit an error when -msoft-float and -maltivec/-mvsx is used together,
but when -msoft-float is used on its own, there is still +altivec and
+vsx in the IR attributes. This patch disables altivec and vsx and all
related sub features when -msoft-float is used.
Enabling __ptr32 keyword to support in Clang for z/OS. It is represented
by addrspace(1) in LLVM IR. Unlike existing implementation, __ptr32 is
not mangled into symbol names for z/OS.
The spec can be found at
https://github.com/riscv-non-isa/riscv-c-api-doc/pull/74.
1. Add the new extension GroupID/Bitmask with latest hwprobe key.
2. Update the `initRISCVFeature `
3. Update `EmitRISCVCpuSupports` due to not only group0 now.
Implement BCD assist builtins for XL and GCC compatibility.
GCC compat:
```
unsigned int __builtin_cdtbcd (unsigned int);
unsigned int __builtin_cbcdtd (unsigned int);
unsigned int __builtin_addg6s (unsigned int, unsigned int);
```
64BIT XL compat:
```
long long __cdtbcd (long long);
long long __cbcdtd (long long);
long long __addg6s (long long source1, long long source2)
```
