This is an instrumentation flag that's similar to
-finstrument-functions, but it only inserts calls on function entry, the
calls are inserted post-inlining, and they don't take any arugments.
This is intended for users who want to instrument function entry with
minimal overhead.
(-pg would be another alternative, but forces frame pointer emission and
affects link flags, so is probably best left alone to be used for
generating gcov data.)
Differential revision: https://reviews.llvm.org/D40276
llvm-svn: 318785
On e.g. PPC the return value and argument were marked 'signext'. This
makes the test expectations a bit more flexible.
Follow-up to r318199.
llvm-svn: 318214
This updates -mcount to use the new attribute names (LLVM r318195), and
switches over -finstrument-functions to also use these attributes rather
than inserting instrumentation in the frontend.
It also adds a new flag, -finstrument-functions-after-inlining, which
makes the cygprofile instrumentation get inserted after inlining rather
than before.
Differential Revision: https://reviews.llvm.org/D39331
llvm-svn: 318199
Not much interesting here. Mostly wiring things together.
One thing worth noting is that the approach is substantially different
from the old PM. Here, the -O0 case works fundamentally differently in
that we just directly build the pipeline without any callbacks or other
cruft. In some ways, this is nice and clean. However, I don't like that
it causes the sanitizers to be enabled with different changes at
different times. =/ Suggestions for a better way to do this are welcome.
Differential Revision: https://reviews.llvm.org/D39085
llvm-svn: 318131
cbrt() is always constant because it can't overflow or underflow. Therefore, it can't set errno.
fma() is not always constant because it can overflow or underflow. Therefore, it can set errno.
But we know that it never sets errno on GNU / MSVC, so make it constant in those environments.
Differential Revision: https://reviews.llvm.org/D39641
llvm-svn: 318093
Recommit of r317951 and r317951 along with what I believe should fix
the remaining buildbot failures - the target triple should be specified
for both the ThinLTO pre-thinlink compile and backend (post-thinlink)
compile to ensure it is consistent.
Original description:
The LTO Config field wasn't being set when invoking a ThinLTO backend
via clang (i.e. for distributed builds).
llvm-svn: 318042
Change Header files of the intrinsics for lowering test and testn intrinsics to IR code.
Removed test and testn builtins from clang
Differential Revision: https://reviews.llvm.org/D38737
llvm-svn: 318035
This patch, together with a matching llvm patch (https://reviews.llvm.org/D38671), implements the lowering of X86 shuffle i/f intrinsics to IR.
Differential Revision: https://reviews.llvm.org/D38672
Change-Id: I9b3c2f2b34323bd9ccb21d0c1832f848b88ec047
llvm-svn: 318025
Summary:
The LTO Config field wasn't being set when invoking a ThinLTO backend
via clang (i.e. for distributed builds).
Reviewers: danielcdh
Subscribers: mehdi_amini, inglorion, eraman, cfe-commits
Differential Revision: https://reviews.llvm.org/D39923
llvm-svn: 317951
The backend should be able to combine the negates to create fmsub, fnmadd, and fnmsub. faddsub converting to fsubadd still needs work I think, but should be very doable.
This matches what we already do for the masked builtins.
This only covers the packed builtins. Scalar builtins will be done after FMA4 is fixed.
llvm-svn: 317873
Summary:
This just seems to have been an oversight. We already supported the f64
atomic add with an explicit scope (e.g. "cta"), but not the scopeless
version.
Reviewers: tra
Subscribers: jholewinski, sanjoy, cfe-commits, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D39638
llvm-svn: 317623
The files are already large, and we may need to add even more RUNs to
distinguish differences based on OS, environment, or other platform things.
llvm-svn: 317583
This just makes const-ness of the builtins match const-ness of their lib function siblings.
We're deferring fixing some of these that are obviously wrong to follow-up patches.
Hopefully, the bugs are visible in the new test file (added at rL317220).
As the description in Builtins.def says: "e = const, but only when -fmath-errno=0".
This is step 2 of N to fix builtins and math calls as discussed in D39204.
Differential Revision: https://reviews.llvm.org/D39481
llvm-svn: 317265
Summary:
This change allows generalizing pointers in type signatures used for
cfi-icall by enabling the -fsanitize-cfi-icall-generalize-pointers flag.
This works by 1) emitting an additional generalized type signature
metadata node for functions and 2) llvm.type.test()ing for the
generalized type for translation units with the flag specified.
This flag is incompatible with -fsanitize-cfi-cross-dso because it would
require emitting twice as many type hashes which would increase artifact
size.
Reviewers: pcc, eugenis
Reviewed By: pcc
Subscribers: kcc
Differential Revision: https://reviews.llvm.org/D39358
llvm-svn: 317044
The LLVM sqrt intrinsic definition changed with:
D28797
...so we don't have to use any relaxed FP settings other than errno handling.
This patch sidesteps a question raised in PR27435:
https://bugs.llvm.org/show_bug.cgi?id=27435
Is a programmer using __builtin_sqrt() invoking the compiler's intrinsic definition of sqrt or the mathlib definition of sqrt?
But we have an answer now: the builtin should match the behavior of the libm function including errno handling.
Differential Revision: https://reviews.llvm.org/D39204
llvm-svn: 317031
Craig noticed that CodeGen wasn't properly ignoring the
values sent to the target attribute. This patch ignores
them.
This patch also sets the 'default' for this checking to
'supported', since only X86 has implemented the support
for checking valid CPU names and Feature Names.
One test was changed to i686, since it uses a lakemont,
which would otherwise be prohibited in x86_64.
Differential Revision: https://reviews.llvm.org/D39357
llvm-svn: 316783
The exisiting code goes out of its way to put block parameters into an
alloca only at -O0, and then describes the funciton argument with a
dbg.declare, which is undocumented in the LLVM-CFE contract and does
not actually behave as intended after LLVM r642022.
This patch just generates the alloca unconditionally, the mem2reg pass
will eliminate it at -O1 and up anyway and points the dbg.declare to
the alloca as intended (which mem2reg will then correctly rewrite into
a dbg.value).
This reapplies r316684 with some dead code removed.
rdar://problem/35043980
Differential Revision: https://reviews.llvm.org/D39305
llvm-svn: 316689
The exisiting code goes out of its way to put block parameters into an
alloca only at -O0, and then describes the funciton argument with a
dbg.declare, which is undocumented in the LLVM-CFE contract and does
not actually behave as intended after LLVM r642022.
This patch just generates the alloca unconditionally, the mem2reg pass
will eliminate it at -O1 and up anyway and points the dbg.declare to
the alloca as intended (which mem2reg will then correctly rewrite into
a dbg.value).
rdar://problem/35043980
Differential Revision: https://reviews.llvm.org/D39305
llvm-svn: 316684
Darwin uses char * for the variadic list type (va_list). We use the PPC
SVR4 ABI for PPC, which uses a structure type for the va_list. When
constructing the GEP, we would fail due to the incorrect handling for
the va_list. Correct this to use the right type.
llvm-svn: 316599
In function GetIntrinsic, not all types are covered. Types double and long long are missed, type long is wrongly treated same as int, it should be same as long long. These problems cause compiler crashes when compiling code in PR31161. This patch fixed the problem.
Differential Revision: https://reviews.llvm.org/D38820
llvm-svn: 316179
This patch has the following changes
A new flag "-mhvx-length={64B|128B}" is introduced to specify the length of the vector.
Previously we have used "-mhvx-double" for 128 Bytes. This adds the target-feature "+hvx-length{64|128}b"
The "-mhvx" flag must be provided on command line to enable HVX for Hexagon. If no -mhvx-length flag
is specified, a default length is picked from the arch mentioned in this priority order from either -mhvx=vxx
or -mcpu. For v60 and v62 the default length is 64 Byte. For unknown versions, the length is 128 Byte. The
-mhvx flag adds the target-feature "+hvxv{hvx_version}"
The 64 Byte mode is soon going to be deprecated. A warning is emitted if 64 Byte is enabled. A warning is
still emitted for the default 64 Byte as well. This warning can be suppressed with a -Wno flag.
The "-mhvx-double" and "-mno-hvx-double" flags are deprecated. A warning is emitted if the driver sees
them on commandline. "-mhvx-double" is an alias to "-mhvx-length=128B"
The compilation will error out if -mhvx-length is specified with out an -mhvx/-mhvx= flag
The macro HVX_LENGTH is defined and is set to the length of the vector.
Eg: #define HVX_LENGTH 64
The macro HVX_ARCH is defined and is set to the version of the HVX.
Eg: #define HVX_ARCH 62
Differential Revision: https://reviews.llvm.org/D38852
llvm-svn: 316102
The nan family of math routines do not rely on global state. They do
however depend on their parameter. This fits the description of pure:
Functions which have no effects except the return value and their
return value depends only on the parameters and/or global variables.
Mark the family as `readonly`.
llvm-svn: 315968
The `nan` family of functions will inspect the contents of the parameter
that they are passed. As a result, the function cannot be annotated as
`const`. The documentation of the `const` attribute explicitly states
this:
Note that a function that has pointer arguments and examines the data
pointed to must not be declared const.
Adjust the annotations on this family of functions.
llvm-svn: 315741
Usually compare expression should return i1 type, so EmitScalarConversion is called before return
return EmitScalarConversion(Result, CGF.getContext().BoolTy, E->getType(), E->getExprLoc());
But when ppc intrinsic is called to compare vectors, the ppc intrinsic can return i32 even E->getType() is BoolTy, in this case EmitScalarConversion does nothing, an i32 type result is returned and causes crash later.
This patch detects this case and truncates the result before return.
Differential Revision: https://reviews.llvm.org/D38656
llvm-svn: 315358
