This patch adds the target call back relaxTlsIeToLe to support TLS relaxation
from initial exec to local exec model.
Differential Revision: https://reviews.llvm.org/D48091
llvm-svn: 340281
Our code in LazyObjFile::parse() has an ELFT switch and
adds a lazy object by its ELFT kind.
Though it might be possible to add a file using a different
architecture and make LLD to silently accept it (if the file
is empty or contains only week symbols). That itself, not a
huge issue perhaps (because the error would be reported later
if the file is fetched), but still does not look clean and correct.
It is possible to report an error earlier and clean up the
code. That is what the patch does.
Ideally, we might want to reuse isCompatible from SymbolTable.cpp,
but it is static and accepts a file as an argument, what is not
convenient. Since such a situation should be rare, I think it
should be OK to go with the way chosen in this patch.
Differential revision: https://reviews.llvm.org/D50899
llvm-svn: 340257
Older Arm architectures do not support the MOVT and MOVW instructions so we
must use an alternative sequence of instructions to transfer control to the
destination.
Assuming at least Armv5 this patch adds support for Thunks that load or add
to the program counter. Note that there are no Armv5 Thumb Thunks as there
is no Thumb branch instruction in Armv5 that supports Thunks. These thunks
will not work for Armv4t (arm7tdmi) as this architecture cannot change state
from using the LDR or ADD instruction.
Differential Revision: https://reviews.llvm.org/D50077
llvm-svn: 340160
The Thumb BL and BLX instructions on older Arm Architectures such as v5 and
v6 have a constrained encoding J1 and J2 must equal 1, later Architectures
relaxed this restriction allowing J1 and J2 to be used to calculate a larger
immediate.
This patch adds support for the old encoding, it is used when the build
attributes for the input objects only contain older architectures.
Differential Revision: https://reviews.llvm.org/D50076
llvm-svn: 340159
LEB compression breaks debug info so we don't want to enable
it by default, even at high optimization levels.
Differential Revision: https://reviews.llvm.org/D50729
llvm-svn: 340073
Summary:
This prefix was added in r333421, and it changed our dumper output to
say things like "CVRegEAX" instead of just "EAX". That's a functional
change that I'd rather avoid.
I tested GCC, Clang, and MSVC, and all of them support #pragma
push_macro. They don't issue warnings whem the macro is not defined
either.
I don't have a Mac so I can't test the real termios.h header, but I
looked at the termios.h sources online and looked for other conflicts.
I saw only the CR* macros, so those are the ones we work around.
Reviewers: zturner, JDevlieghere
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D50851
llvm-svn: 339907
Summary: This makes it conform to what the comment says. Otherwise when getErrPlace() is called afterwards, cast<InputSection>(D) will cause incompatible cast as MergeInputSection is not a subclass of InputSection.
Reviewers: ruiu, grimar, espindola, pcc
Reviewed By: grimar
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D50742
llvm-svn: 339904
This patch solves 2 problems:
1) It adds a test to check the line below:
https://github.com/llvm-mirror/lld/blob/master/ELF/InputFiles.cpp#L334
Test case contains SHT_GROUP section with a broken (0xFF) flag.
2) The patch fixes the case when we silently accepted such broken groups
in the case when there were no other objects with the same group signature.
llvm-svn: 339765
We have a dead piece of code there which is impossible to trigger
using regular objects I believe.
Patch removes it and adds a test case showing how this condition
can be triggered with use of a broken object and crash the linker.
llvm-svn: 339680
We have a crash issue when handling the empty -defsym.
For parsing this option we are using ScriptParser class which is used
generally for reading the linker script. For empty defsym case, we
pass the empty memory buffer and crash in the place removed in https://reviews.llvm.org/rL336436.
But reverting of the above patch would not help here (we would still crash but a bit later). And
even after fixing the crash we would report something like
"lld.exe: error: -defsym:1: unexpected EOF"
It is probably not the appropriate message because mentions EOF.
I think the issue should be handled on a higher level like this patch does.
So we do not want to pass the empty memory buffer first of all I believe.
Differential revision: https://reviews.llvm.org/D50498
llvm-svn: 339412
Patch by PkmX.
This patch makes lld recognize RISC-V target and implements basic
relocation for RV32/RV64 (and RVC). This should be necessary for static
linking ELF applications.
The ABI documentation for RISC-V can be found at:
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md.
Note that the documentation is far from complete so we had to figure out
some details from bfd.
The patch should be pretty straightforward. Some highlights:
- A new relocation Expr R_RISCV_PC_INDIRECT is added. This is needed as
the low part of a PC-relative relocation is linked to the corresponding
high part (auipc), see:
https://github.com/riscv/riscv-elf-psabi-doc/blob/master/riscv-elf.md#pc-relative-symbol-addresses
- LLVM's MC support for RISC-V is very incomplete (we are working on
this), so tests are given in objectyaml format with the original
assembly included in the comments. Once we have complete support for
RISC-V in MC, we can switch to llvm-as/llvm-objdump.
- We don't support linker relaxation for now as it requires greater
changes to lld that is beyond the scope of this patch. Once this is
accepted we can start to work on adding relaxation to lld.
Differential Revision: https://reviews.llvm.org/D39322
llvm-svn: 339364
link.exe ignores REL32 relocations on 32-bit x86, as well as relocations
against non-function symbols such as labels. This makes lld do the same.
Differential Revision: https://reviews.llvm.org/D50430
llvm-svn: 339345
This is a larger patch. This relocation has irregular immediate
masks that require a lookup to find the correct mask.
Differential Revision: https://reviews.llvm.org/D50450
llvm-svn: 339332
Adding all libcall symbols to the link can have undesired consequences.
For example, the libgcc implementation of __sync_val_compare_and_swap_8
on 32-bit ARM pulls in an .init_array entry that aborts the program if
the Linux kernel does not support 64-bit atomics, which would prevent
the program from running even if it does not use 64-bit atomics.
This change makes it so that we only add libcall symbols to the
link before LTO if we have to, i.e. if the symbol's definition is in
bitcode. Any other required libcall symbols will be added to the link
after LTO when we add the LTO object file to the link.
Differential Revision: https://reviews.llvm.org/D50475
llvm-svn: 339301
If /subsystem:windows is passed, link.exe only looks for WinMain and wWinMain,
and if /subsystem:console is passed it only looks for main and wmain. lld-link
used to look for all 4 in both cases. This patch makes lld-link match
link.exe's behavior.
This requires that the subsystem is known by the time findDefaultEntry() gets
called. findDefaultEntry() is called before the main link loop, so that the
loop can mark the entry point as undefined. That means inferSubsystem() has to
be called above the main loop as well. This in turn means /subsystem: from
.drectve sections only has an effect on entry point inference for obj files
passed to lld-link directly (and not in obj files found later in .lib files).
link.exe seems to ignore /subsystem: for obj files from lib files completely
(while in lld it's ignored only for entry point detection but it still
overrides /subsystem: flags passed on the command line for the value that gets
written in the output file).
Also, if the subsytem isn't needed (e.g. when only writing a /def: lib file and
not writing a coff file), link.exe doesn't complain if the subsystem isn't
known, so both subsystem and entry point handling should be below the early
return lld has for that case.
Fixes PR36523.
https://reviews.llvm.org/D50316
llvm-svn: 339165
Summary:
The issue with the python path is that the path to python on Windows can contain spaces. To make the tests always work, the path to python needs to be surrounded by quotes.
This is a companion change to: https://reviews.llvm.org/D50206
Reviewers: asmith, zturner, espindola
Subscribers: emaste, sbc100, arichardson, aheejin, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D50282
llvm-svn: 339075
GNU ld's manual says that TARGET(foo) is basically an alias for
`--format foo` where foo is a BFD target name such as elf64-x86-64.
Unlike GNU linkers, lld doesn't allow arbitrary BFD target name for
--format. We accept only "default", "elf" or "binary". This makes
situation a bit tricky because we can't simply make TARGET an alias for
--target.
A quick code search revealed that the usage number of TARGET is very
small, and the only meaningful usage is to switch to the binary mode.
Thus, in this patch, we handle only TARGET(elf.*) and TARGET(binary).
Differential Revision: https://reviews.llvm.org/D48153
llvm-svn: 339060
MinGW configurations don't use associative comdats, as GNU ld doesn't
support that. Instead they produce normal comdats named .text$sym,
.xdata$sym and .pdata$sym.
GNU ld doesn't discard any comdats starting with .xdata or .pdata,
even if --gc-sections is used (while it does discard other unreferenced
comdats), regardless of what symbol name is used after the $ separator.
For LLD, treat any such comdat as implicitly associative to the base
symbol. This requires maintaining a map from symbol name to section
number, but that is only maintained when the MinGW flag has been
enabled.
Differential Revision: https://reviews.llvm.org/D49700
llvm-svn: 339058
It's not an error if a common symbol (uninitialized data, with alignment
specified via the aligncomm directive) is replaced with a regular
one with initialized data (with alignment specified via the section
chunk).
Differential Revision: https://reviews.llvm.org/D50268
llvm-svn: 339049
--export now implies --undefined
This is really a requirement from emscripten but I think it
makes sense in general too.
Differential Revision: https://reviews.llvm.org/D50287
llvm-svn: 339047
During copy relocation of a variable defined in a DSO, if a TLS variable in that DSO happens to have the same st_value, it would also be copied. This was unnecessary because the addresses of TLS variables are relative to TLS segment. They don't interfere with non-TLS variables.
This copying behavior can be harmful in the following scenario:
For function-scope thread-local variables with non-trivial constructors,
they have guard variables. In the case of x86_64 general-dynamic model:
template <int N>
void foo() {
thread_local std::string a;
}
GOT[n] R_X86_64_DTPMOD64 guard variable for a
GOT[n+1] R_X86_64_DTPOFF64 guard variable for a
GOT[n+2] R_X86_64_DTPMOD64 a
GOT[n+3] R_X86_64_DTPOFF64 a
a and its guard variable are both represented as TLS variables, which
should be within the same module. If one is copy relocated to the main
module while the other is not, their module ID will mismatch and can
cause access without prior construction.
Reviewers: ruiu, espindola
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D50289
llvm-svn: 339042
Add a test for the R_ARM_THM_JUMP11 relocation to an undefined symbol. We
have to use yaml2obj as llvm-mc relaxes the narrow branch to a b.w which
uses the R_ARM_THM_JUMP24 relocation instead.
Differential Revision: https://reviews.llvm.org/D50234
llvm-svn: 338999
