24929 Commits

Author SHA1 Message Date
Matthias Braun
a3b701f828 SelectionDAGDumper: Print simple operands inline.
Print simple operands inline instead of their pointer/value number.
Simple operands are SDNodes without predecessors like Constant(FP), Register,
UNDEF. This unifies the behaviour with dumpr() which was already doing this.

Previously:
  t0: ch = EntryToken
    t1: i64 = Register %vreg0
  t2: i64,ch = CopyFromReg t0, t1
    t3: i64 = Constant<1>
  t4: i64 = add t2, t3
    t5: i64 = Constant<2>
  t6: i64 = add t2, t5
  t10: i64 = undef
  t11: i8,ch = load t0, t2, t10<LD1[%tmp81]>
  t12: i8,ch = load t0, t4, t10<LD1[%tmp10]>
  t13: i8,ch = load t0, t6, t10<LD1[%tmp12]>

Now:
  t0: ch = EntryToken
  t2: i64,ch = CopyFromReg t0, Register:i64 %vreg0
  t4: i64 = add t2, Constant:i64<1>
  t6: i64 = add t2, Constant:i64<2>
  t11: i8,ch = load<LD1[%tmp81]> t0, t2, undef:i64
  t12: i8,ch = load<LD1[%tmp10]> t0, t4, undef:i64
  t13: i8,ch = load<LD1[%tmp12]> t0, t6, undef:i64

Differential Revision: http://reviews.llvm.org/D12567

llvm-svn: 248628
2015-09-25 22:27:02 +00:00
Matt Arsenault
3c07e963b8 DAGCombiner: Check if store is volatile first
This is the simpler check. NFC.

llvm-svn: 248625
2015-09-25 22:06:19 +00:00
Matthias Braun
c804cdb912 TargetRegisterInfo: Introduce PrintLaneMask.
This makes it more convenient to print lane masks and lead to more
uniform printing.

llvm-svn: 248624
2015-09-25 21:51:24 +00:00
Matthias Braun
e6a2485e1a TargetRegisterInfo: Add typedef unsigned LaneBitmask and use it where apropriate; NFC
llvm-svn: 248623
2015-09-25 21:51:14 +00:00
Sanjay Patel
bbbf9a1a34 merge vector stores into wider vector stores and fix AArch64 misaligned access TLI hook (PR21711)
This is a redo of D7208 ( r227242 - http://llvm.org/viewvc/llvm-project?view=revision&revision=227242 ).

The patch was reverted because an AArch64 target could infinite loop after the change in DAGCombiner 
to merge vector stores. That happened because AArch64's allowsMisalignedMemoryAccesses() wasn't telling
the truth. It reported all unaligned memory accesses as fast, but then split some 128-bit unaligned
accesses up in performSTORECombine() because they are slow.

This patch attempts to fix the problem in AArch's allowsMisalignedMemoryAccesses() while preserving
existing (perhaps questionable) lowering behavior.

The x86 test shows that store merging is working as intended for a target with fast 32-byte unaligned
stores.

Differential Revision: http://reviews.llvm.org/D12635
 

llvm-svn: 248622
2015-09-25 21:49:48 +00:00
Matthias Braun
e86bbd8979 PrologueEpilogInserter: Fix missing live-ins when savepoint equals restorepoint
The algorithm would not modify the live-in list of blocks below the save
block point which is correct unless it happens to be a restore point at
the same time.
Also fixes the benign issue of live-in registers being added twice in
some cases.

The testcase is based on a test submitted by Kit Barton.

Differential Revision: http://reviews.llvm.org/D13176

llvm-svn: 248620
2015-09-25 21:41:40 +00:00
Matthias Braun
c2d4befb54 MachineBasicBlock: Factor out common code into isReturnBlock()
llvm-svn: 248617
2015-09-25 21:25:19 +00:00
Matt Arsenault
10aa807856 PeepholeOptimizer: Remove redundant copies
If a virtual register is copied and another copy was already
seen, replace with the previous copy. This only handles the
simplest cases for now.

This pattern shows up from various operand restrictions
AMDGPU has which require inserting copies depending
on the register class of the operands.

llvm-svn: 248611
2015-09-25 20:22:12 +00:00
Chad Rosier
d9f102b464 Simplify code. NFC.
llvm-svn: 248610
2015-09-25 20:20:22 +00:00
Matt Arsenault
50f0a42b66 Fix typo
llvm-svn: 248549
2015-09-24 22:36:49 +00:00
Mohammad Shahid
13f1dfdf2e Codegen: Fix llvm.*absdiff semantic.
Fixes the overflow case of llvm.*absdiff intrinsic also updats the tests and LangRef.rst accordingly.

Differential Revision: http://reviews.llvm.org/D11678

llvm-svn: 248483
2015-09-24 10:35:03 +00:00
Matt Arsenault
68d938649e Introduce target hook for optimizing register copies
Allow a target to do something other than search for copies
that will avoid cross register bank copies.

Implement for SI by only rewriting the most basic copies,
so it should look through anything like a subregister extract.

I'm not entirely satisified with this because it seems like
eliminating a reg_sequence that isn't fully used should work
generically for all targets without them having to override
something. However, it seems to be tricky to have a simple
implementation of this without rewriting to invalid  kinds
of subregister copies on some targets.

I'm not sure if there is currently a generic way to easily check
if a subregister index would be valid for the current use.
The current set of TargetRegisterInfo::get*Class functions don't
quite behave like I would expect (e.g. getSubClassWithSubReg
returns the maximal register class rather than the minimal), so
I'm not sure how to make the generic test keep searching if
SrcRC:SrcSubReg is a valid replacement for DefRC:DefSubReg. Making
the default implementation to check for simple copies breaks
a variety of ARM and x86 tests by producing illegal subregister uses.

The ARM tests are not actually changed since it should still be using
the same sharesSameRegisterFile implementation, this just relaxes
them to not check for specific registers.

llvm-svn: 248478
2015-09-24 08:36:14 +00:00
Matt Arsenault
c7ec46c3aa Remove dead declaration
llvm-svn: 248471
2015-09-24 07:51:12 +00:00
Matt Arsenault
c721df0478 Use new TokenFactor chain when merging stores
If the stores are storing values from loads which partially
alias the stores, we could end up placing the merged loads
and stores on the same chain which has the potential to break.
Each store may have a different chain dependency on only some
of the original loads. Create a new TokenFactor to capture all
of the required dependencies of the stores rather than assuming
all stores can use the same chain.

The testcase is a situation where this happens, although
it does not have an observable change from this. The DAG nodes
just happened to not be reordered before despite this missing
chain dependency.

This is based on an off-list report for an out of tree target
which regressed due to r246307 and I haven't managed to find a case
where the nodes do end up reordered with an in tree target.

llvm-svn: 248468
2015-09-24 07:22:38 +00:00
Evgeniy Stepanov
a2002b08f7 Android support for SafeStack.
Add two new ways of accessing the unsafe stack pointer:

* At a fixed offset from the thread TLS base. This is very similar to
  StackProtector cookies, but we plan to extend it to other backends
  (ARM in particular) soon. Bionic-side implementation here:
  https://android-review.googlesource.com/170988.
* Via a function call, as a fallback for platforms that provide
  neither a fixed TLS slot, nor a reasonable TLS implementation (i.e.
  not emutls).

This is a re-commit of a change in r248357 that was reverted in
r248358.

llvm-svn: 248405
2015-09-23 18:07:56 +00:00
Evgeniy Stepanov
8d0e3011d8 Revert "Android support for SafeStack."
test/Transforms/SafeStack/abi.ll breaks when target is not supported;
needs refactoring.

llvm-svn: 248358
2015-09-23 01:23:22 +00:00
Evgeniy Stepanov
ce2e16f00c Android support for SafeStack.
Add two new ways of accessing the unsafe stack pointer:

* At a fixed offset from the thread TLS base. This is very similar to
  StackProtector cookies, but we plan to extend it to other backends
  (ARM in particular) soon. Bionic-side implementation here:
  https://android-review.googlesource.com/170988.
* Via a function call, as a fallback for platforms that provide
  neither a fixed TLS slot, nor a reasonable TLS implementation (i.e.
  not emutls).

llvm-svn: 248357
2015-09-23 01:03:51 +00:00
Cong Hou
9def6efd7e Fixed an issue on updating profile data when lowering switch statement.
Fixed the issue that when there is an edge from the jump table to the default statement, we should check it directly instead of checking if the sibling of the jump table header is a successor of the jump table header, which may not be the default statment but a successor of it.

llvm-svn: 248354
2015-09-23 00:20:27 +00:00
Adrian Prantl
77fefeba37 Debug Info: Emit the dwo_name only in skeleton CUs, not in DWOs.
llvm-svn: 248340
2015-09-22 23:21:00 +00:00
Matthias Braun
73e4221e6c LiveIntervalAnalysis: Avoid multiple connected liveness components
We may have subregister defs which are unused but not discovered and
cleaned up prior to liveness analysis. This creates multiple connected
components in the resulting live range which are forbidden in the
MachineVerifier because they would unnecesarily constrain the register
allocator. Rewrite those dead definitions to define a newly created
virtual register.

Differential Revision: http://reviews.llvm.org/D13035

llvm-svn: 248335
2015-09-22 22:37:44 +00:00
Matthias Braun
5efe871971 LiveInterval: Distribute subregister liveranges to new intervals in ConnectedVNInfoEqClasses::Distribute()
This improves ConnectedVNInfoEqClasses::Distribute() to distribute the
segments and value numbers in the subranges instead of conservatively
clearing all subregister info.

No separate test here, just clearing the subrange instead of properly
distributing them would however break my upcoming fix regarding dead super
register definitions.

Differential Revision: http://reviews.llvm.org/D13075

llvm-svn: 248334
2015-09-22 22:37:42 +00:00
Ahmed Bougacha
07a844d758 [AArch64] Emit clrex in the expanded cmpxchg fail block.
In the comparison failure block of a cmpxchg expansion, the initial
ldrex/ldxr will not be followed by a matching strex/stxr.
On ARM/AArch64, this unnecessarily ties up the execution monitor,
which might have a negative performance impact on some uarchs.

Instead, release the monitor in the failure block.
The clrex instruction was designed for this: use it.

Also see ARMARM v8-A B2.10.2:
"Exclusive access instructions and Shareable memory locations".

Differential Revision: http://reviews.llvm.org/D13033

llvm-svn: 248291
2015-09-22 17:21:44 +00:00
Benjamin Kramer
3c96f0a54e Make helper function static. NFC.
llvm-svn: 248278
2015-09-22 14:34:57 +00:00
NAKAMURA Takumi
0a7d0ad95f Untabify.
llvm-svn: 248264
2015-09-22 11:15:07 +00:00
NAKAMURA Takumi
a9cb538a74 Reformat blank lines.
llvm-svn: 248263
2015-09-22 11:14:39 +00:00
NAKAMURA Takumi
84965031a7 Reformat comment lines.
llvm-svn: 248262
2015-09-22 11:14:12 +00:00
NAKAMURA Takumi
70ad98aca4 Reformat.
llvm-svn: 248261
2015-09-22 11:13:55 +00:00
Matthias Braun
d3dd1354a4 LiveIntervalAnalysis: Factor common code into splitSeparateComponents; NFC
llvm-svn: 248241
2015-09-22 03:44:41 +00:00
Sanjay Patel
fc580a60e2 function names should start with a lower case letter; NFC
llvm-svn: 248224
2015-09-21 23:03:16 +00:00
Sanjay Patel
4ac6b115e8 don't repeat function/variable names in header comments; NFC
llvm-svn: 248222
2015-09-21 22:47:23 +00:00
Simon Pilgrim
4003ed2da3 [DAGCombiner] Improve FMA support for interpolation patterns
This patch adds support for combining patterns such as (FMUL(FADD(1.0, x), y)) and (FMUL(FSUB(x, 1.0), y)) to their FMA equivalents.

This is useful in particular for linear interpolation cases such as (FADD(FMUL(x, t), FMUL(y, FSUB(1.0, t))))

Differential Revision: http://reviews.llvm.org/D13003

llvm-svn: 248210
2015-09-21 20:32:48 +00:00
Simon Pilgrim
e8e5a17a12 [DAGCombiner] Tidy up FMA combine helpers. NFCI.
Based on feedback for D13003.

llvm-svn: 248206
2015-09-21 20:15:03 +00:00
Stephen Canon
b12db0e42c Remove roundingMode argument in APFloat::mod
Because mod is always exact, this function should have never taken a rounding mode argument.  The actual implementation still has issues, which I'll look at resolving in a subsequent patch.

llvm-svn: 248195
2015-09-21 19:29:25 +00:00
Matt Arsenault
8fb9b94f7f Fix accidentally committed debug printing
llvm-svn: 248190
2015-09-21 18:21:10 +00:00
Matthias Braun
b9fe44ddb0 SelectionDAG: Use InsertNode for EntryNode
This fixes problems where two nodes have persistent debug id 0 assigned.

llvm-svn: 248182
2015-09-21 17:41:05 +00:00
Matt Arsenault
b774834429 DAGCombiner: Replace store of FP constant after attemping store merges
If storing multiple FP constants, some subset of the stores
would be replaced with integers due to visit order, so
MergeConsecutiveStores would only partially merge
these.

llvm-svn: 248169
2015-09-21 15:59:46 +00:00
Matt Arsenault
a30ddb6524 Factor replacement of stores of FP constants into new function
llvm-svn: 248168
2015-09-21 15:59:43 +00:00
Chad Rosier
03a47305ec [Machine Combiner] Refactor machine reassociation code to be target-independent.
No functional change intended.
Patch by Haicheng Wu <haicheng@codeaurora.org>!

http://reviews.llvm.org/D12887
PR24522

llvm-svn: 248164
2015-09-21 15:09:11 +00:00
Craig Topper
0013be16ff Use makeArrayRef or None to avoid unnecessarily mentioning the ArrayRef type extra times. NFC
llvm-svn: 248140
2015-09-21 05:32:41 +00:00
Maksim Panchenko
0510cd5161 [PrologEpilogInserter] Minor refactoring.
Differential Revision: http://reviews.llvm.org/D12924

llvm-svn: 248084
2015-09-19 04:42:15 +00:00
Maksim Panchenko
07b754daf8 Test commit. Fix comment. NFC.
llvm-svn: 248082
2015-09-19 04:01:19 +00:00
Cong Hou
d40105d321 Update edge weights properly when merging blocks in if-conversion.
In if-conversion, there is a utility function MergeBlocks() that is used to merge blocks. However, when new edges are built in this function the edge weight is either not provided or not updated properly, leading to a modified CFG with incorrect edge weights. This patch corrects this issue.

Differential Revision: http://reviews.llvm.org/D12513

llvm-svn: 248030
2015-09-18 20:22:41 +00:00
James Y Knight
e72b0dbf97 Make MachineScheduler debug output less confusing.
At least...a little bit.

llvm-svn: 248020
2015-09-18 18:52:20 +00:00
Matthias Braun
77771cfd97 SelectionDAGDumper: Leave out the <multiple use> markers
They mostly clutter the output while it is still possible to see which
node has multiple users without them.

Differential Revision: http://reviews.llvm.org/D12569

llvm-svn: 248013
2015-09-18 17:57:33 +00:00
Matthias Braun
bab3fb45e5 SelectionDAGDumper: Avoid unnecessary newlines
Before:
  t0 = EntryToken:ch

    t0: <multiple use>
        t0: <multiple use>
      t1 = CopyFromReg:v4f32,ch t0, Register:v4f32  %vreg0

      t25 = IMPLICIT_DEF:v4f32

    t26 = HADDPSrr:v4f32 t1, t25

  t23 = CopyToReg:ch,glue t0, Register:v4f32  %XMM0, t26

    t23: <multiple use>
    t23: <multiple use>
  t24 = RETQ:ch Register:v4f32  %XMM0, t23, t23:1

After:
    t0: <multiple use>
        t0: <multiple use>
      t1 = CopyFromReg:v4f32,ch t0, Register:v4f32  %vreg0
    t26 = X86ISD::FHADD:v4f32 t1, undef:v4f32
  t23 = CopyToReg:ch,glue t0, Register:v4f32  %XMM0, t26
    t23: <multiple use>
    t21 = TargetConstant:i16<0>
    t23: <multiple use>
  t24 = X86ISD::RET_FLAG:ch t23, t21, Register:v4f32  %XMM0, t23:1

Differential Revision: http://reviews.llvm.org/D12568

llvm-svn: 248012
2015-09-18 17:57:31 +00:00
Matthias Braun
f89b7c7188 SelectionDAGDumper: Hide [ID=X], [ORD=X] and source locations by default.
You can show them with the new -dag-dump-verbose switch.

Differential Revision: http://reviews.llvm.org/D12566

llvm-svn: 248011
2015-09-18 17:57:28 +00:00
Matthias Braun
0b7d6c14c9 SelectionDAG: Introduce PersistentID to SDNode for assert builds.
This gives us more human readable numbers to identify nodes in debug
dumps.

Before:
  0x7fcbd9700160: ch = EntryToken

  0x7fcbd985c7c8: i64 = Register %RAX

   ...

      0x7fcbd9700160: <multiple use>
    0x7fcbd985c578: i64,ch = MOV64rm 0x7fcbd985c6a0, 0x7fcbd985cc68, 0x7fcbd985c200, 0x7fcbd985cd90, 0x7fcbd985ceb8, 0x7fcbd9700160<Mem:LD8[@foo]> [ORD=2]

  0x7fcbd985c8f0: ch,glue = CopyToReg 0x7fcbd9700160, 0x7fcbd985c7c8, 0x7fcbd985c578 [ORD=3]

    0x7fcbd985c7c8: <multiple use>
    0x7fcbd985c8f0: <multiple use>
    0x7fcbd985c8f0: <multiple use>
  0x7fcbd985ca18: ch = RETQ 0x7fcbd985c7c8, 0x7fcbd985c8f0, 0x7fcbd985c8f0:1 [ORD=3]

Now:
  t0: ch = EntryToken

  t5: i64 = Register %RAX

    ...

      t0: <multiple use>
    t3: i64,ch = MOV64rm t10, t12, t11, t13, t14, t0<Mem:LD8[@foo]> [ORD=2]

  t6: ch,glue = CopyToReg t0, t5, t3 [ORD=3]

    t5: <multiple use>
    t6: <multiple use>
    t6: <multiple use>
  t7: ch = RETQ t5, t6, t6:1 [ORD=3]

Differential Revision: http://reviews.llvm.org/D12564

llvm-svn: 248010
2015-09-18 17:41:00 +00:00
David Majnemer
9966fe8f85 [WinEH] Moved funclet pads should be in relative order
We shifted the MachineBasicBlocks to the end of the MachineFunction in
DFS order.  This will not ensure that MachineBasicBlocks which fell
through to one another will remain contiguous.  Instead, implement
a stable sort algorithm for iplist.

This partially reverts commit r214150.

llvm-svn: 247978
2015-09-18 08:18:07 +00:00
Bob Wilson
dd0eadce7d Whitespace. Indent with spaces instead of a tab.
llvm-svn: 247969
2015-09-18 05:36:13 +00:00
Quentin Colombet
b4c6886215 [ShrinkWrap] Refactor the handling of infinite loop in the analysis.
- Strenghten the logic to be sure we hoist the restore point out of the current
  loop. (The fixes a bug with infinite loop, added as part of the patch.)
- Walk over the exit blocks of the current loop to conver to the desired restore
  point in one iteration of the update loop.

llvm-svn: 247958
2015-09-17 23:21:34 +00:00