This will get the same ConstantSDNode scalar or vector splat value as the current separate dyn_cast<ConstantSDNode> / isVector() approach.
llvm-svn: 284578
Summary:
The original heuristic to break critical edge during machine sink is relatively conservertive: when there is only one instruction sinkable to the critical edge, it is likely that the machine sink pass will not break the critical edge. This leads to many speculative instructions executed at runtime. However, with profile info, we could model the splitting benefits: if the critical edge has 50% taken rate, it would always be beneficial to split the critical edge to avoid the speculated runtime instructions. This patch uses profile to guide critical edge splitting in machine sink pass.
The performance impact on speccpu2006 on Intel sandybridge machines:
spec/2006/fp/C++/444.namd 25.3 +0.26%
spec/2006/fp/C++/447.dealII 45.96 -0.10%
spec/2006/fp/C++/450.soplex 41.97 +1.49%
spec/2006/fp/C++/453.povray 36.83 -0.96%
spec/2006/fp/C/433.milc 23.81 +0.32%
spec/2006/fp/C/470.lbm 41.17 +0.34%
spec/2006/fp/C/482.sphinx3 48.13 +0.69%
spec/2006/int/C++/471.omnetpp 22.45 +3.25%
spec/2006/int/C++/473.astar 21.35 -2.06%
spec/2006/int/C++/483.xalancbmk 36.02 -2.39%
spec/2006/int/C/400.perlbench 33.7 -0.17%
spec/2006/int/C/401.bzip2 22.9 +0.52%
spec/2006/int/C/403.gcc 32.42 -0.54%
spec/2006/int/C/429.mcf 39.59 +0.19%
spec/2006/int/C/445.gobmk 26.98 -0.00%
spec/2006/int/C/456.hmmer 24.52 -0.18%
spec/2006/int/C/458.sjeng 28.26 +0.02%
spec/2006/int/C/462.libquantum 55.44 +3.74%
spec/2006/int/C/464.h264ref 46.67 -0.39%
geometric mean +0.20%
Manually checked 473 and 471 to verify the diff is in the noise range.
Reviewers: rengolin, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24818
llvm-svn: 284545
Summary:
The original heuristic to break critical edge during machine sink is relatively conservertive: when there is only one instruction sinkable to the critical edge, it is likely that the machine sink pass will not break the critical edge. This leads to many speculative instructions executed at runtime. However, with profile info, we could model the splitting benefits: if the critical edge has 50% taken rate, it would always be beneficial to split the critical edge to avoid the speculated runtime instructions. This patch uses profile to guide critical edge splitting in machine sink pass.
The performance impact on speccpu2006 on Intel sandybridge machines:
spec/2006/fp/C++/444.namd 25.3 +0.26%
spec/2006/fp/C++/447.dealII 45.96 -0.10%
spec/2006/fp/C++/450.soplex 41.97 +1.49%
spec/2006/fp/C++/453.povray 36.83 -0.96%
spec/2006/fp/C/433.milc 23.81 +0.32%
spec/2006/fp/C/470.lbm 41.17 +0.34%
spec/2006/fp/C/482.sphinx3 48.13 +0.69%
spec/2006/int/C++/471.omnetpp 22.45 +3.25%
spec/2006/int/C++/473.astar 21.35 -2.06%
spec/2006/int/C++/483.xalancbmk 36.02 -2.39%
spec/2006/int/C/400.perlbench 33.7 -0.17%
spec/2006/int/C/401.bzip2 22.9 +0.52%
spec/2006/int/C/403.gcc 32.42 -0.54%
spec/2006/int/C/429.mcf 39.59 +0.19%
spec/2006/int/C/445.gobmk 26.98 -0.00%
spec/2006/int/C/456.hmmer 24.52 -0.18%
spec/2006/int/C/458.sjeng 28.26 +0.02%
spec/2006/int/C/462.libquantum 55.44 +3.74%
spec/2006/int/C/464.h264ref 46.67 -0.39%
geometric mean +0.20%
Manually checked 473 and 471 to verify the diff is in the noise range.
Reviewers: rengolin, davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D24818
llvm-svn: 284541
Summary:
The original implementation is in r261607, which was reverted in r269726 to accomendate the ProfileSummaryInfo analysis pass. The new implementation:
1. add a new metadata for function section prefix
2. query against ProfileSummaryInfo in CGP to set the correct section prefix for each function
3. output the section prefix set by CGP
Reviewers: davidxl, eraman
Subscribers: vsk, llvm-commits
Differential Revision: https://reviews.llvm.org/D24989
llvm-svn: 284533
This is a follow-up to D24816 - where we changed reciprocal estimates to be function attributes
rather than TargetOptions.
This patch is intended to be a structural, but not functional change. By moving all of the
TargetRecip functionality into TargetLowering, we can remove all of the reciprocal estimate
state, shield the callers from the string format implementation, and simplify/localize the
logic needed for a target to enable this.
If a function has a "reciprocal-estimates" attribute, those settings may override the target's
default reciprocal preferences for whatever operation and data type we're trying to optimize.
If there's no attribute string or specific setting for the op/type pair, just use the target
default settings.
As noted earlier, a better solution would be to move the reciprocal estimate settings to IR
instructions and SDNodes rather than function attributes, but that's a multi-step job that
requires infrastructure improvements. I intend to work on that, but it's not clear how long
it will take to get all the pieces in place.
Differential Revision: https://reviews.llvm.org/D25440
llvm-svn: 284495
In futher patches we shall have alignment field added to DIVariable family
and switching from uint64_t to uint32_t will save 4 bytes per variable.
Differential Revision: https://reviews.llvm.org/D25620
llvm-svn: 284482
This patch adds simplified support for tail calls on ARM with XRay instrumentation.
Known issue: compiled with generic flags: `-O3 -g -fxray-instrument -Wall
-std=c++14 -ffunction-sections -fdata-sections` (this list doesn't include my
specific flags like --target=armv7-linux-gnueabihf etc.), the following program
#include <cstdio>
#include <cassert>
#include <xray/xray_interface.h>
[[clang::xray_always_instrument]] void __attribute__ ((noinline)) fC() {
std::printf("In fC()\n");
}
[[clang::xray_always_instrument]] void __attribute__ ((noinline)) fB() {
std::printf("In fB()\n");
fC();
}
[[clang::xray_always_instrument]] void __attribute__ ((noinline)) fA() {
std::printf("In fA()\n");
fB();
}
// Avoid infinite recursion in case the logging function is instrumented (so calls logging
// function again).
[[clang::xray_never_instrument]] void simplyPrint(int32_t functionId, XRayEntryType xret)
{
printf("XRay: functionId=%d type=%d.\n", int(functionId), int(xret));
}
int main(int argc, char* argv[]) {
__xray_set_handler(simplyPrint);
printf("Patching...\n");
__xray_patch();
fA();
printf("Unpatching...\n");
__xray_unpatch();
fA();
return 0;
}
gives the following output:
Patching...
XRay: functionId=3 type=0.
In fA()
XRay: functionId=3 type=1.
XRay: functionId=2 type=0.
In fB()
XRay: functionId=2 type=1.
XRay: functionId=1 type=0.
XRay: functionId=1 type=1.
In fC()
Unpatching...
In fA()
In fB()
In fC()
So for function fC() the exit sled seems to be called too much before function
exit: before printing In fC().
Debugging shows that the above happens because printf from fC is also called as
a tail call. So first the exit sled of fC is executed, and only then printf is
jumped into. So it seems we can't do anything about this with the current
approach (i.e. within the simplification described in
https://reviews.llvm.org/D23988 ).
Differential Revision: https://reviews.llvm.org/D25030
llvm-svn: 284456
Summary:
There are differences in codegen between Linux and Windows due to:
1. Using std::sort which uses quicksort which is a non-stable sort.
2. Iterating over Set data structure where the iteration order is
non deterministic.
Reviewers: arsenm, grosbach, junbuml, zinob, MatzeB
Subscribers: MatzeB, wdng
Differential Revision: https://reviews.llvm.org/D25695
llvm-svn: 284441
As noted in:
https://reviews.llvm.org/D25685
This is the next-to-smallest step needed to enable the ComputeNumSignBits fix in that patch.
In a minor attempt to keep some structure, we're pulling the FP helper over along with its
integer sibling, but clearly we can and should do more refactoring of the similar helper
functions in DAGCombiner and SelectionDAG to simplify and not duplicate functionality.
llvm-svn: 284421
This came up as part of:
https://reviews.llvm.org/D25485
Note that the vector case is missed because ComputeNumSignBits() is deficient for vectors.
llvm-svn: 284395
SelectionDAG::getConstantPool will automatically determine an appropriate alignment if one is not specified. It does this by querying the type's preferred alignment. This can end up creating quite a lot of padding when the preferred alignment for vectors is 128.
In optimize-for-size mode, it makes sense to instead query the ABI type alignment which is often smaller and causes less padding.
llvm-svn: 284381
CodeGenPrepare knows how to move a zext of a load into the same basic block
where the load lives. The goal is to help ISel match a zero-extending load
instead of two separated instructions.
CGP attempts to move a zext computation even if it lives in a basic block that
does not post-dominate the load's basic block. That means, the hoisted zext may
be speculated. Preserving the zext location would hurt the debugging experience
and the quality of sample pgo.
With this patch, when moving a zext near to its associated load, CGP no longer
propagates the zext's debug location. Instead, CGP conservatively reuses the
same debug location for the load and the zext.
An alternative approach would be to assign an artificial line-0 location to the
zext. However we don't want to over-use the 'line-0' for this particular case
because it would have a size cost in the line-table section for no additional
benefit.
Differential Revision: https://reviews.llvm.org/D25611
llvm-svn: 284377
The previous names were both misleading (the MachineLegalizer actually
contained the info tables) and inconsistent with the selector & translator (in
having a "Machine") prefix. This should make everything sensible again.
The only functional change is the name of a couple of command-line options.
llvm-svn: 284287
Eli noted this potential bug in the post-commit thread for:
https://reviews.llvm.org/rL284239
...but I'm not sure how to trigger it, so there's no test case yet.
llvm-svn: 284268
Summary:
The main purpose of this new helper is to enable simplifying operations that
have multiple uses. SimplifyDemandedBits does not handle multiple uses
currently, and this new function makes it possible to optimize:
and v1, v0, 0xffffff
mul24 v2, v1, v1 ; Multiply ignoring high 8-bits.
To:
mul24 v2, v0, v0
Where before this would not be optimized, because v1 has multiple uses.
Reviewers: bogner, arsenm
Subscribers: nhaehnle, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D24964
llvm-svn: 284266
X86. The pass optimizes as a unit the entire wide load + shuffles pattern
produced by interleaved vectorization. This initial patch optimizes one pattern
(64-bit elements interleaved by a factor of 4). Future patches will generalize
to additional patterns.
Patch by Farhana Aleen
Differential revision: http://reviews.llvm.org/D24681
llvm-svn: 284260
This will be needed by a future commit to support sign/zero extending from v8i8 to v8i64 which requires a sign/zero_extend_vector_inreg to be created which requires v8i8 to be concatenated upto v64i8 and goes through this code.
llvm-svn: 284204
Summary:
This operation is promoted the same way was ISD::BSWAP. This will
prevent a regression in test/Target/AMDGOU/bitreverse.ll when i16
support is implemented.
Reviewers: bogner, hfinkel
Subscribers: hfinkel, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D25202
llvm-svn: 284163
the X86 subdirectory. Original commit message:
Requires a valid TargetMachine to be passed to the SafeStack pass.
Patch by Michael LeMay
Differential revision: http://reviews.llvm.org/D24896
llvm-svn: 284161
Relax the constraint for empty live-ranges while doing last chance
recoloring. Indeed, those live-ranges do not need an actual color to be
fond for the recoloring to work.
Empty live-range may happen as a result of splitting/spilling.
Unfortunately no test case for in-tree targets.
llvm-svn: 284152
Retrying after upstream changes.
Simplify Consecutive Merge Store Candidate Search
Now that address aliasing is much less conservative, push through
simplified store merging search which only checks for parallel stores
through the chain subgraph. This is cleaner as the separation of
non-interfering loads/stores from the store-merging logic.
Whem merging stores, search up the chain through a single load, and
finds all possible stores by looking down from through a load and a
TokenFactor to all stores visited. This improves the quality of the
output SelectionDAG and generally the output CodeGen (with some
exceptions).
Additional Minor Changes:
1. Finishes removing unused AliasLoad code
2. Unifies the the chain aggregation in the merged stores across
code paths
3. Re-add the Store node to the worklist after calling
SimplifyDemandedBits.
4. Increase GatherAllAliasesMaxDepth from 6 to 18. That number is
arbitrary, but seemed sufficient to not cause regressions in
tests.
This finishes the change Matt Arsenault started in r246307 and
jyknight's original patch.
Many tests required some changes as memory operations are now
reorderable. Some tests relying on the order were changed to use
volatile memory operations
Noteworthy tests:
CodeGen/AArch64/argument-blocks.ll -
It's not entirely clear what the test_varargs_stackalign test is
supposed to be asserting, but the new code looks right.
CodeGen/AArch64/arm64-memset-inline.lli -
CodeGen/AArch64/arm64-stur.ll -
CodeGen/ARM/memset-inline.ll -
The backend now generates *worse* code due to store merging
succeeding, as we do do a 16-byte constant-zero store efficiently.
CodeGen/AArch64/merge-store.ll -
Improved, but there still seems to be an extraneous vector insert
from an element to itself?
CodeGen/PowerPC/ppc64-align-long-double.ll -
Worse code emitted in this case, due to the improved store->load
forwarding.
CodeGen/X86/dag-merge-fast-accesses.ll -
CodeGen/X86/MergeConsecutiveStores.ll -
CodeGen/X86/stores-merging.ll -
CodeGen/Mips/load-store-left-right.ll -
Restored correct merging of non-aligned stores
CodeGen/AMDGPU/promote-alloca-stored-pointer-value.ll -
Improved. Correctly merges buffer_store_dword calls
CodeGen/AMDGPU/si-triv-disjoint-mem-access.ll -
Improved. Sidesteps loading a stored value and
merges two stores
CodeGen/X86/pr18023.ll -
This test has been removed, as it was asserting incorrect
behavior. Non-volatile stores *CAN* be moved past volatile loads,
and now are.
CodeGen/X86/vector-idiv.ll -
CodeGen/X86/vector-lzcnt-128.ll -
It's basically impossible to tell what these tests are actually
testing. But, looks like the code got better due to the memory
operations being recognized as non-aliasing.
CodeGen/X86/win32-eh.ll -
Both loads of the securitycookie are now merged.
CodeGen/AMDGPU/vgpr-spill-emergency-stack-slot-compute.ll -
This test appears to work but no longer exhibits the spill behavior.
Reviewers: arsenm, hfinkel, tstellarAMD, jyknight, nhaehnle
Subscribers: wdng, nhaehnle, nemanjai, arsenm, weimingz, niravd, RKSimon, aemerson, qcolombet, dsanders, resistor, tstellarAMD, t.p.northover, spatel
Differential Revision: https://reviews.llvm.org/D14834
llvm-svn: 284151
Summary: We need a new LLVM intrinsic to implement MS _AddressOfReturnAddress builtin on 64-bit Windows.
Reviewers: majnemer, rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25293
llvm-svn: 284061
Branch folder removes implicit defs if they are the only non-branching
instructions in a block, and the branches do not use the defined registers.
The problem is that in some cases these implicit defs are required for
the liveness information to be correct.
Differential Revision: https://reviews.llvm.org/D25478
llvm-svn: 284036
