This reverts commit e2a885537f11f8d9ced1c80c2c90069ab5adeb1d. Build failures were fixed right away and reverting the original commit without the fixes breaks the build again.
The `DiagnosticOptions` class is currently intrusively
reference-counted, which makes reasoning about its lifetime very
difficult in some cases. For example, `CompilerInvocation` owns the
`DiagnosticOptions` instance (wrapped in `llvm::IntrusiveRefCntPtr`) and
only exposes an accessor returning `DiagnosticOptions &`. One would
think this gives `CompilerInvocation` exclusive ownership of the object,
but that's not the case:
```c++
void shareOwnership(CompilerInvocation &CI) {
llvm::IntrusiveRefCntPtr<DiagnosticOptions> CoOwner = &CI.getDiagnosticOptions();
// ...
}
```
This is a perfectly valid pattern that is being actually used in the
codebase.
I would like to ensure the ownership of `DiagnosticOptions` by
`CompilerInvocation` is guaranteed to be exclusive. This can be
leveraged for a copy-on-write optimization later on. This PR changes
usages of `DiagnosticOptions` across `clang`, `clang-tools-extra` and
`lldb` to not be intrusively reference-counted.
…(#128150)"
This was too aggressive, and leads to problems for downstream users:
https://github.com/llvm/llvm-project/pull/128150#issuecomment-2739803409
Let's revert and reland it once we have addressed the problems.
This reverts commit e4a8969e56572371201863594b3a549de2e23f32.
Co-authored-by: Carlos Gálvez <carlos.galvez@zenseact.com>
[clang-tidy] Avoid processing declarations in system headers
Currently, clang-tidy processes the entire TranslationUnit, including
declarations in system headers. However, the work done in system
headers is discarded at the very end when presenting results, unless
the SystemHeaders option is active.
This is a lot of wasted work, and makes clang-tidy very slow.
In comparison, clangd only processes declarations in the main file,
and it's claimed to be 10x faster than clang-tidy:
https://github.com/lljbash/clangd-tidy
To solve this problem, we can apply a similar solution done in clangd
into clang-tidy. We do this by changing the traversal scope from the
default TranslationUnitDecl, to only contain the top-level declarations
that are _not_ part of system headers. We do this in the
MatchASTConsumer class, so the logic can be reused by other tools.
This behavior is currently off by default, and only clang-tidy
enables skipping system headers. If wanted, this behavior can be
activated by other tools in follow-up patches.
I had to move MatchFinderOptions out of the MatchFinder class,
because otherwise I could not set a default value for the
"bool SkipSystemHeaders" member otherwise. The compiler error message
was "default member initializer required before the end of its
enclosing class".
Note: this behavior is not active if the user requests warnings from
system headers via the SystemHeaders option.
Note2: out of all the unit tests, only one of them fails:
readability/identifier-naming-anon-record-fields.cpp
This is because the limited traversal scope no longer includes the
"CXXRecordDecl" of the global anonymous union, see:
https://github.com/llvm/llvm-project/issues/130618
I have not found a way to make this work. For now, document the
technical debt introduced.
Note3: I have purposely decided to make this new feature enabled by
default, instead of adding a new "opt-in/opt-out" flag. Having a new
flag would mean duplicating all our tests to ensure they work in both
modes, which would be infeasible. Having it enabled by default allow
people to get the benefits immediately. Given that all unit tests pass,
the risk for regressions is low. Even if that's the case, the only
issue would be false negatives (fewer things are detected), which
are much more tolerable than false positives.
Credits: original implementation by @njames93, here:
https://reviews.llvm.org/D150126
This implementation is simpler in the sense that it does not consider
HeaderFilterRegex to filter even further. A follow-up patch could
include the functionality if wanted.
Fixes#52959
Co-authored-by: Carlos Gálvez <carlos.galvez@zenseact.com>
We've found that basic profiling could help improving/optimizing when
developing clang-tidy checks.
This PR adds an extra command
```
set enable-profile (true|false) Set whether to enable matcher profiling.
```
which enables profiling queries on each file.
Sample output:
```
$ cat test.cql
set enable-profile true
m binaryOperator(isExpansionInMainFile())
$ cat test.c
int test(int i, int j) {
return i + j;
}
$ clang-query --track-memory -f test.cql test.c --
Match #1:
{{.*}}/test.c:2:10: note: "root" binds here
2 | return i + j;
| ^~~~~
1 match.
===-------------------------------------------------------------------------===
clang-query matcher profiling
===-------------------------------------------------------------------------===
Total Execution Time: 0.0000 seconds (0.0000 wall clock)
---User Time--- --System Time-- --User+System-- ---Wall Time--- ---Mem--- --- Name ---
0.0000 (100.0%) 0.0000 (100.0%) 0.0000 (100.0%) 0.0000 (100.0%) 224 {{.*}}/test.c
0.0000 (100.0%) 0.0000 (100.0%) 0.0000 (100.0%) 0.0000 (100.0%) 224 Total
```
This functionality was added about three years ago, but has been in a
significantly broken state since it was added. It has begun to cause a
maintenance burden for work in Clang (largely due to the complexity of
having two levels of code generation involved), and the original author
is unable to help maintain it. Because it only worked under limited
circumstances and because of the maintenance burden, it is being
removed. If someone wishes to resurrect the functionality, they should
hopefully be able to do so from this one commit.
Fixes#82591
The clang-query tool has the ability to execute or pre-load queries from
a file when the tool is launched, but doesn't have the ability to do the
same from the interactive REPL prompt. Because the prompt also doesn't
seem to allow multi-line matchers, this can make prototyping and
iterating on more complicated matchers difficult.
Supporting a dynamic load at REPL time allows the cost of reading the
compilation database and building the AST to be imposed just once, and
allows faster prototyping.
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
After rG5e1801813d93210acae84ff3c68a01512c2df9bc The help command still lists IgnoreImplicitCastsAndParentheses as a valid option.
Reviewed By: aaron.ballman, rsmith
Differential Revision: https://reviews.llvm.org/D97806
D62056 makes the output color if clang auto-detects a tty, but if it
does not, there is no way to force it to use colors anyway.
This patch adjusts the command-lines given to ClangTool which will
force color on or off if --use-color is specified.
In general there is no way to get to the ASTContext from most AST nodes
(Decls are one of the exception). This will be a problem when implementing
the rest of APValue::dump since we need the ASTContext to dump some kinds of
APValues.
The ASTContext* in ASTDumper and TextNodeDumper is not always non-null.
This is because we still want to be able to use the various dump() functions
in a debugger.
No functional changes intended.
Reverted in fcf4d5e4499a391dff42ea1a096f146db44147b6 since a few dump()
functions in lldb where missed.
In general there is no way to get to the ASTContext from most AST nodes
(Decls are one of the exception). This will be a problem when implementing
the rest of APValue::dump since we need the ASTContext to dump some kinds of
APValues.
The ASTContext* in ASTDumper and TextNodeDumper is not always
non-null. This is because we still want to be able to use the various
dump() functions in a debugger.
No functional changes intended.
Revert "Fix -Wunused-lambda-capture warnings."
This reverts commit 2369560f4a7720b19edfbf9de14ef061307ff773.
This reverts commit 522ee29a4fb3814db604b585c8637247477ec057.
clang/lib/ASTMatchers/Dynamic/Parser.cpp:610:13: warning: implicit conversion turns string literal into bool: 'const char [35]' to 'bool' [-Wstring-conversion]
assert(!"Newline should never be found here");
Summary:
This way, the output is not limited by the various API differences
between the dump() member functions. For example, all dumps are now in
color, while that used to be the case only for Decls and Stmts, but not
Types.
Additionally, while DynTypedNode::dump (which was used up to now) was
limited to dumping only Decls, Stmts and Types, this makes clang-query
support everything ASTNodeTraverser supports.
Reviewers: aaron.ballman
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D62056
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Summary:
Add granular options for AST dumping, text printing and diagnostics.
This makes it possible to
* Have both diag and dump active at once
* Extend the output with other queryable content in the future.
Reviewers: aaron.ballman, pcc, ioeric, ilya-biryukov, klimek, sammccall
Reviewed By: aaron.ballman
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D52857
llvm-svn: 345522
Summary: This will make it possible to add non-exclusive mode output.
Reviewers: aaron.ballman
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D53501
llvm-svn: 345194
Summary: Future development can then dump other content than AST.
Reviewers: aaron.ballman
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D53500
llvm-svn: 345193
Summary:
This will make it possible to easily
* Add new commands which accept <feature> parameters
* Extend the list of features
Reviewers: aaron.ballman
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D53498
llvm-svn: 345192
Summary:
This is useful if using clang-query -f with a file containing multiple
matchers.
Reviewers: aaron.ballman
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D52859
llvm-svn: 344840
D31709 [NFC] Refactor DiagnosticRenderer to use FullSourceLoc was committed
in r305684 and reverted in 305688 as clang-tidy and clang-query failed to
build. This change updates the extra tools to use the new interface.
Reviewers: christof, rnk, rsmith, rovka, alexfh
Reviewed By: alexfh
Differential Revision: https://reviews.llvm.org/D34513
llvm-svn: 306385
Summary:
Add new 'let' command to bind arbitrary values into constants.
These constants can then be used in the matcher expressions.
Reviewers: pcc
CC: cfe-commits
Differential Revision: http://reviews.llvm.org/D3383
llvm-svn: 206984
This tool is for interactive exploration of the Clang AST using AST matchers.
It currently allows the user to enter a matcher at an interactive prompt
and view the resulting bindings as diagnostics, AST pretty prints or AST
dumps. Example session:
$ cat foo.c
void foo(void) {}
$ clang-query foo.c --
clang-query> match functionDecl()
Match #1:
foo.c:1:1: note: "root" binds here
void foo(void) {}
^~~~~~~~~~~~~~~~~
1 match.
Differential Revision: http://llvm-reviews.chandlerc.com/D2098
llvm-svn: 194227
