The MIRPrinter emits ` :: ` at the start of a MMO. The MIRLexer eats all
the white space after the operand and before the `::` when there is no
comment. We need to eat the space after the comment to allow MIRLexer to
parse comments on a MMO.
As part of FEAT_PAuthLR, a new DWARF Frame Instruction was introduced,
`DW_CFA_AARCH64_negate_ra_state_with_pc`. This instructs Libunwind that
the PC has been used with the signing instruction. This change includes
three commits
- Libunwind support for the newly introduced DWARF Instruction
- CodeGen Support for the DWARF Instructions
- Reversing the changes made in #96377. Due to
`DW_CFA_AARCH64_negate_ra_state_with_pc`'s requirements to be placed
immediately after the signing instruction, this would mean the CFI
Instruction location was not consistent with the generated location when
not using FEAT_PAuthLR. The commit reverses the changes and makes the
location consistent across the different branch protection options.
While this does have a code size effect, this is a negligible one.
For the ABI information, see here:
853286c7ab/aadwarf64/aadwarf64.rst (id23)
This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
Some opcodes in MIR are defined to be convergent by the target by setting
IsConvergent in the corresponding TD file. For example, in AMDGPU, the opcodes
G_SI_CALL and G_INTRINSIC* are marked as convergent. But this is too
conservative, since calls to functions that do not execute convergent operations
should not be marked convergent. This information is available in LLVM IR.
The new flag MIFlag::NoConvergent now allows the IR translator to mark an
instruction as not performing any convergent operations. It is relevant only on
occurrences of opcodes that are marked isConvergent in the target.
Differential Revision: https://reviews.llvm.org/D157475
Record the call frame size on entry to each basic block. This is usually
zero except when a basic block has been split in the middle of a call
sequence.
This simplifies PEI::replaceFrameIndices which previously had to visit
basic blocks in a specific order and had special handling for
unreachable blocks. More importantly it paves the way for an equally
simple implementation of a backwards version of replaceFrameIndices,
which is required to fully convert PrologEpilogInserter to backwards
register scavenging, which is preferred because it does not rely on
accurate kill flags.
Differential Revision: https://reviews.llvm.org/D156113
Record the SP adjustment on entry to each basic block. This is almost
always zero except on targets like ARM which can split a basic block in
the middle of a call sequence.
This simplifies PEI::replaceFrameIndices which previously had to visit
basic blocks in a specific order and had special handling for
unreachable blocks. More importantly it paves the way for an equally
simple implementation of a backwards version of replaceFrameIndices,
which is required to fully convert PrologEpilogInserter to backwards
register scavenging, which is preferred because it does not rely on
accurate kill flags.
Differential Revision: https://reviews.llvm.org/D154281
Sometimes an developer would like to have more control over cmov vs branch. We have unpredictable metadata in LLVM IR, but currently it is ignored by X86 backend. Propagate this metadata and avoid cmov->branch conversion in X86CmovConversion for cmov with this metadata.
Example:
```
int MaxIndex(int n, int *a) {
int t = 0;
for (int i = 1; i < n; i++) {
// cmov is converted to branch by X86CmovConversion
if (a[i] > a[t]) t = i;
}
return t;
}
int MaxIndex2(int n, int *a) {
int t = 0;
for (int i = 1; i < n; i++) {
// cmov is preserved
if (__builtin_unpredictable(a[i] > a[t])) t = i;
}
return t;
}
```
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D118118
Let Propeller use specialized IDs for basic blocks, instead of MBB number.
This allows optimizations not just prior to asm-printer, but throughout the entire codegen.
This patch only implements the functionality under the new `LLVM_BB_ADDR_MAP` version, but the old version is still being used. A later patch will change the used version.
####Background
Today Propeller uses machine basic block (MBB) numbers, which already exist, to map native assembly to machine IR. This is done as follows.
- Basic block addresses are captured and dumped into the `LLVM_BB_ADDR_MAP` section just before the AsmPrinter pass which writes out object files. This ensures that we have a mapping that is close to assembly.
- Profiling mapping works by taking a virtual address of an instruction and looking up the `LLVM_BB_ADDR_MAP` section to find the MBB number it corresponds to.
- While this works well today, we need to do better when we scale Propeller to target other Machine IR optimizations like spill code optimization. Register allocation happens earlier in the Machine IR pipeline and we need an annotation mechanism that is valid at that point.
- The current scheme will not work in this scenario because the MBB number of a particular basic block is not fixed and changes over the course of codegen (via renumbering, adding, and removing the basic blocks).
- In other words, the volatile MBB numbers do not provide a one-to-one correspondence throughout the lifetime of Machine IR. Profile annotation using MBB numbers is restricted to a fixed point; only valid at the exact point where it was dumped.
- Further, the object file can only be dumped before AsmPrinter and cannot be dumped at an arbitrary point in the Machine IR pass pipeline. Hence, MBB numbers are not suitable and we need something else.
####Solution
We propose using fixed unique incremental MBB IDs for basic blocks instead of volatile MBB numbers. These IDs are assigned upon the creation of machine basic blocks. We modify `MachineFunction::CreateMachineBasicBlock` to assign the fixed ID to every newly created basic block. It assigns `MachineFunction::NextMBBID` to the MBB ID and then increments it, which ensures having unique IDs.
To ensure correct profile attribution, multiple equivalent compilations must generate the same Propeller IDs. This is guaranteed as long as the MachineFunction passes run in the same order. Since the `NextBBID` variable is scoped to `MachineFunction`, interleaving of codegen for different functions won't cause any inconsistencies.
The new encoding is generated under the new version number 2 and we keep backward-compatibility with older versions.
####Impact on Size of the `LLVM_BB_ADDR_MAP` Section
Emitting the Propeller ID results in a 23% increase in the size of the `LLVM_BB_ADDR_MAP` section for the clang binary.
Reviewed By: tmsriram
Differential Revision: https://reviews.llvm.org/D100808
This patch makes two notable changes to the MIR debug info representation,
which result in different MIR output but identical final DWARF output (NFC
w.r.t. the full compilation). The two changes are:
* The introduction of a new MachineOperand type, MO_DbgInstrRef, which
consists of two unsigned numbers that are used to index an instruction
and an output operand within that instruction, having a meaning
identical to first two operands of the current DBG_INSTR_REF
instruction. This operand is only used in DBG_INSTR_REF (see below).
* A change in syntax for the DBG_INSTR_REF instruction, shuffling the
operands to make it resemble DBG_VALUE_LIST instead of DBG_VALUE,
and replacing the first two operands with a single MO_DbgInstrRef-type
operand.
This patch is the first of a set that will allow DBG_INSTR_REF
instructions to refer to multiple machine locations in the same manner
as DBG_VALUE_LIST.
Reviewed By: jmorse
Differential Revision: https://reviews.llvm.org/D129372
Let Propeller use specialized IDs for basic blocks, instead of MBB number.
This allows optimizations not just prior to asm-printer, but throughout the entire codegen.
This patch only implements the functionality under the new `LLVM_BB_ADDR_MAP` version, but the old version is still being used. A later patch will change the used version.
####Background
Today Propeller uses machine basic block (MBB) numbers, which already exist, to map native assembly to machine IR. This is done as follows.
- Basic block addresses are captured and dumped into the `LLVM_BB_ADDR_MAP` section just before the AsmPrinter pass which writes out object files. This ensures that we have a mapping that is close to assembly.
- Profiling mapping works by taking a virtual address of an instruction and looking up the `LLVM_BB_ADDR_MAP` section to find the MBB number it corresponds to.
- While this works well today, we need to do better when we scale Propeller to target other Machine IR optimizations like spill code optimization. Register allocation happens earlier in the Machine IR pipeline and we need an annotation mechanism that is valid at that point.
- The current scheme will not work in this scenario because the MBB number of a particular basic block is not fixed and changes over the course of codegen (via renumbering, adding, and removing the basic blocks).
- In other words, the volatile MBB numbers do not provide a one-to-one correspondence throughout the lifetime of Machine IR. Profile annotation using MBB numbers is restricted to a fixed point; only valid at the exact point where it was dumped.
- Further, the object file can only be dumped before AsmPrinter and cannot be dumped at an arbitrary point in the Machine IR pass pipeline. Hence, MBB numbers are not suitable and we need something else.
####Solution
We propose using fixed unique incremental MBB IDs for basic blocks instead of volatile MBB numbers. These IDs are assigned upon the creation of machine basic blocks. We modify `MachineFunction::CreateMachineBasicBlock` to assign the fixed ID to every newly created basic block. It assigns `MachineFunction::NextMBBID` to the MBB ID and then increments it, which ensures having unique IDs.
To ensure correct profile attribution, multiple equivalent compilations must generate the same Propeller IDs. This is guaranteed as long as the MachineFunction passes run in the same order. Since the `NextBBID` variable is scoped to `MachineFunction`, interleaving of codegen for different functions won't cause any inconsistencies.
The new encoding is generated under the new version number 2 and we keep backward-compatibility with older versions.
####Impact on Size of the `LLVM_BB_ADDR_MAP` Section
Emitting the Propeller ID results in a 23% increase in the size of the `LLVM_BB_ADDR_MAP` section for the clang binary.
Reviewed By: tmsriram
Differential Revision: https://reviews.llvm.org/D100808
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
This patch replaces those occurrences of NoneType that would trigger
an error if the definition of NoneType were missing in None.h.
To keep this patch focused, I am deliberately not replacing None with
std::nullopt in this patch or updating comments. They will be
addressed in subsequent patches.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
Differential Revision: https://reviews.llvm.org/D138539
The KCFI sanitizer, enabled with `-fsanitize=kcfi`, implements a
forward-edge control flow integrity scheme for indirect calls. It
uses a !kcfi_type metadata node to attach a type identifier for each
function and injects verification code before indirect calls.
Unlike the current CFI schemes implemented in LLVM, KCFI does not
require LTO, does not alter function references to point to a jump
table, and never breaks function address equality. KCFI is intended
to be used in low-level code, such as operating system kernels,
where the existing schemes can cause undue complications because
of the aforementioned properties. However, unlike the existing
schemes, KCFI is limited to validating only function pointers and is
not compatible with executable-only memory.
KCFI does not provide runtime support, but always traps when a
type mismatch is encountered. Users of the scheme are expected
to handle the trap. With `-fsanitize=kcfi`, Clang emits a `kcfi`
operand bundle to indirect calls, and LLVM lowers this to a
known architecture-specific sequence of instructions for each
callsite to make runtime patching easier for users who require this
functionality.
A KCFI type identifier is a 32-bit constant produced by taking the
lower half of xxHash64 from a C++ mangled typename. If a program
contains indirect calls to assembly functions, they must be
manually annotated with the expected type identifiers to prevent
errors. To make this easier, Clang generates a weak SHN_ABS
`__kcfi_typeid_<function>` symbol for each address-taken function
declaration, which can be used to annotate functions in assembly
as long as at least one C translation unit linked into the program
takes the function address. For example on AArch64, we might have
the following code:
```
.c:
int f(void);
int (*p)(void) = f;
p();
.s:
.4byte __kcfi_typeid_f
.global f
f:
...
```
Note that X86 uses a different preamble format for compatibility
with Linux kernel tooling. See the comments in
`X86AsmPrinter::emitKCFITypeId` for details.
As users of KCFI may need to locate trap locations for binary
validation and error handling, LLVM can additionally emit the
locations of traps to a `.kcfi_traps` section.
Similarly to other sanitizers, KCFI checking can be disabled for a
function with a `no_sanitize("kcfi")` function attribute.
Relands 67504c95494ff05be2a613129110c9bcf17f6c13 with a fix for
32-bit builds.
Reviewed By: nickdesaulniers, kees, joaomoreira, MaskRay
Differential Revision: https://reviews.llvm.org/D119296
The KCFI sanitizer, enabled with `-fsanitize=kcfi`, implements a
forward-edge control flow integrity scheme for indirect calls. It
uses a !kcfi_type metadata node to attach a type identifier for each
function and injects verification code before indirect calls.
Unlike the current CFI schemes implemented in LLVM, KCFI does not
require LTO, does not alter function references to point to a jump
table, and never breaks function address equality. KCFI is intended
to be used in low-level code, such as operating system kernels,
where the existing schemes can cause undue complications because
of the aforementioned properties. However, unlike the existing
schemes, KCFI is limited to validating only function pointers and is
not compatible with executable-only memory.
KCFI does not provide runtime support, but always traps when a
type mismatch is encountered. Users of the scheme are expected
to handle the trap. With `-fsanitize=kcfi`, Clang emits a `kcfi`
operand bundle to indirect calls, and LLVM lowers this to a
known architecture-specific sequence of instructions for each
callsite to make runtime patching easier for users who require this
functionality.
A KCFI type identifier is a 32-bit constant produced by taking the
lower half of xxHash64 from a C++ mangled typename. If a program
contains indirect calls to assembly functions, they must be
manually annotated with the expected type identifiers to prevent
errors. To make this easier, Clang generates a weak SHN_ABS
`__kcfi_typeid_<function>` symbol for each address-taken function
declaration, which can be used to annotate functions in assembly
as long as at least one C translation unit linked into the program
takes the function address. For example on AArch64, we might have
the following code:
```
.c:
int f(void);
int (*p)(void) = f;
p();
.s:
.4byte __kcfi_typeid_f
.global f
f:
...
```
Note that X86 uses a different preamble format for compatibility
with Linux kernel tooling. See the comments in
`X86AsmPrinter::emitKCFITypeId` for details.
As users of KCFI may need to locate trap locations for binary
validation and error handling, LLVM can additionally emit the
locations of traps to a `.kcfi_traps` section.
Similarly to other sanitizers, KCFI checking can be disabled for a
function with a `no_sanitize("kcfi")` function attribute.
Reviewed By: nickdesaulniers, kees, joaomoreira, MaskRay
Differential Revision: https://reviews.llvm.org/D119296
There are two different senses in which a block can be "address-taken".
There can be a BlockAddress involved, which means we need to map the
IR-level value to some specific block of machine code. Or there can be
constructs inside a function which involve using the address of a basic
block to implement certain kinds of control flow.
Mixing these together causes a problem: if target-specific passes are
marking random blocks "address-taken", if we have a BlockAddress, we
can't actually tell which MachineBasicBlock corresponds to the
BlockAddress.
So split this into two separate bits: one for BlockAddress, and one for
the machine-specific bits.
Discovered while trying to sort out related stuff on D102817.
Differential Revision: https://reviews.llvm.org/D124697
When parsing MachineMemOperands, MIRParser treated the "align" keyword
the same as "basealign". Really "basealign" should specify the
alignment of the MachinePointerInfo base value, and "align" should
specify the alignment of that base value plus the offset.
This worked OK when the specified alignment was no larger than the
alignment of the offset, but in cases like this it just caused
confusion:
STW killed %18, 4, %stack.1.ap2.i.i :: (store (s32) into %stack.1.ap2.i.i + 4, align 8)
MIRPrinter would never have printed this, with an offset of 4 but an
align of 8, so it must have been written by hand. MIRParser would
interpret "align 8" as "basealign 8", but I think it is better to give
an error and force the user to write "basealign 8" if that is what they
really meant.
Differential Revision: https://reviews.llvm.org/D120400
Change-Id: I7eeeefc55c2df3554ba8d89f8809a2f45ada32d8
Print this basic block flag as inlineasm-br-indirect-target and parse
it. This allows you to write MIR test cases for INLINEASM_BR. The test
case I added is one that I wanted to precommit anyway for D110834.
Differential Revision: https://reviews.llvm.org/D111291
- Add standalone metadata parsing support so that machine metadata nodes
could be populated before and accessed during MIR is parsed.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D103282
Memory operands store a base alignment that does not factor in
the effect of the offset on the alignment.
Previously the printing code only printed the base alignment if
it was different than the size. If there is an offset, the reader
would need to figure out the effective alignment themselves. This
has confused me before and someone else was recently confused on
IRC.
This patch prints the possibly offset adjusted alignment if it is
different than the size. And prints the base alignment if it is
different than the alignment. The MIR parser has been updated to
read basealign in addition to align.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D94344
This patch defines the MIR format for debug instruction references: it's an
integer trailing an instruction, marked out by "debug-instr-number", much
like how "debug-location" identifies the DebugLoc metadata of an
instruction. The instruction number is stored directly in a MachineInstr.
Actually referring to an instruction comes in a later patch, but is done
using one of these instruction numbers.
I've added a round-trip test and two verifier checks: that we don't label
meta-instructions as generating values, and that there are no duplicates.
Differential Revision: https://reviews.llvm.org/D85746
Summary:
The BFloat IR type is introduced to provide support for, initially, the BFloat16
datatype introduced with the Armv8.6 architecture (optional from Armv8.2
onwards). It has an 8-bit exponent and a 7-bit mantissa and behaves like an IEEE
754 floating point IR type.
This is part of a patch series upstreaming Armv8.6 features. Subsequent patches
will upstream intrinsics support and C-lang support for BFloat.
Reviewers: SjoerdMeijer, rjmccall, rsmith, liutianle, RKSimon, craig.topper, jfb, LukeGeeson, sdesmalen, deadalnix, ctetreau
Subscribers: hiraditya, llvm-commits, danielkiss, arphaman, kristof.beyls, dexonsmith
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78190
Otherwise, the Win64 unwinder considers direct branches to such empty
trailing BBs to be a branch out of the function. It treats such a branch
as a tail call, which can only be part of an epilogue. If the unwinder
misclassifies such a branch as part of the epilogue, it will fail to
unwind the stack further. This can lead to bad stack traces, or failure
to handle exceptions properly. This is described in
https://llvm.org/PR45064#c4, and by the comment at the top of the
X86AvoidTrailingCallPass.cpp file.
It should be safe to insert int3 for such blocks. An empty trailing BB
that reaches this pass is pretty much guaranteed to be unreachable. If
a program executed such a block, it would fall off the end of the
function.
Most of the complexity in this patch comes from threading through the
"EHFuncletEntry" boolean on the MIRParser and registering the pass so we
can stop and start codegen around it. I used an MIR test because we
should teach LLVM to optimize away these branches as a follow-up.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D76531
This is the second patch in a series of patches to enable basic block
sections support.
This patch adds support for:
* Creating direct jumps at the end of basic blocks that have fall
through instructions.
* New pass, bbsections-prepare, that analyzes placement of basic blocks
in sections.
* Actual placing of a basic block in a unique section with special
handling of exception handling blocks.
* Supports placing a subset of basic blocks in a unique section.
* Support for MIR serialization and deserialization with basic block
sections.
Parent patch : D68063
Differential Revision: https://reviews.llvm.org/D73674
This adds infrastructure to print and parse MIR MachineOperand comments.
The motivation for the ARM backend is to print condition code names instead of
magic constants that are difficult to read (for human beings). For example,
instead of this:
dead renamable $r2, $cpsr = tEOR killed renamable $r2, renamable $r1, 14, $noreg
t2Bcc %bb.4, 0, killed $cpsr
we now print this:
dead renamable $r2, $cpsr = tEOR killed renamable $r2, renamable $r1, 14 /* CC::always */, $noreg
t2Bcc %bb.4, 0 /* CC:eq */, killed $cpsr
This shows that MachineOperand comments are enclosed between /* and */. In this
example, the EOR instruction is not conditionally executed (i.e. it is "always
executed"), which is encoded by the 14 immediate machine operand. Thus, now
this machine operand has /* CC::always */ as a comment. The 0 on the next
conditional branch instruction represents the equal condition code, thus now
this operand has /* CC:eq */ as a comment.
As it is a comment, the MI lexer/parser completely ignores it. The benefit is
that this keeps the change in the lexer extremely minimal and no target
specific parsing needs to be done. The changes on the MIPrinter side are also
minimal, as there is only one target hooks that is used to create the machine
operand comments.
Differential Revision: https://reviews.llvm.org/D74306
In D71841 we inverted the sense of the SDNode-level flag to ensure all nodes
default to potentially raising FP exceptions unless otherwise specified --
i.e. if we forget to propagate the flag somewhere, the effect is now only
lost performance, not incorrect code.
However, the related flag at the MI level still defaults to nodes not raising
FP exceptions unless otherwise specified. To be fully on the (conservatively)
safe side, we should invert that flag as well.
This patch does so by replacing MIFlag::FPExcept with MIFlag::NoFPExcept.
(Note that this does also introduce an incompatible change in the MIR format.)
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D72466
Summary:
Added MIRFormatter for target specific MIR formating and parsing with
immediate and custom pseudo source values. Target machine can subclass
MIRFormatter and implement custom logic for printing and parsing
immediate and custom pseudo source values for better readability.
* Target specific immediate mnemonic need to start with "." follows by
identifier string. When MIR parser sees immediate it will call target
specific parsing function.
* Custom pseudo source value need to start with custom follows by
double-quoted string. MIR parser will pass the quoted string to target
specific PSV parsing function.
* MIRFormatter have 2 helper functions to facilitate LLVM value printing
and parsing for custom PSV if they refers LLVM values.
Patch by Peng Guo
Reviewers: dsanders, arsenm
Reviewed By: dsanders
Subscribers: wdng, jvesely, nhaehnle, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69836
Summary:
Added MIRFormatter for target specific MIR formating and parsing with
immediate and custom pseudo source values. Target machine can subclass
MIRFormatter and implement custom logic for printing and parsing
immediate and custom pseudo source values for better readability.
* Target specific immediate mnemonic need to start with "." follows by
identifier string. When MIR parser sees immediate it will call target
specific parsing function.
* Custom pseudo source value need to start with custom follows by
double-quoted string. MIR parser will pass the quoted string to target
specific PSV parsing function.
* MIRFormatter have 2 helper functions to facilitate LLVM value printing
and parsing for custom PSV if they refers LLVM values.
Reviewers: dsanders, arsenm
Reviewed By: dsanders
Subscribers: wdng, jvesely, nhaehnle, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69836
Summary:
This patch adds MIR parsing and printing for heap alloc markers, which were
added in D69136. They are printed as an operand similar to pre-/post-instr
symbols, with a heap-alloc-marker token and a metadata node.
Reviewers: rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69864
Currently shufflemasks get emitted as any other constant, and you end
up with a bunch of virtual registers of G_CONSTANT with a
G_BUILD_VECTOR. The AArch64 selector then asserts on anything that
doesn't fit this pattern. This isn't an ideal representation, and
should avoid legalization and have fewer opportunities for a
representational error.
Rather than invent a new shuffle mask operand type, similar to what
ShuffleVectorSDNode does, just track the original IR Constant mask
operand. I don't completely like the idea of adding another link to
the IR, but MIR is already quite dependent on IR constants already,
and this will allow sharing the shuffle mask utility functions with
the IR.
llvm-svn: 368704
The ISD::STRICT_ nodes used to implement the constrained floating-point
intrinsics are currently never passed to the target back-end, which makes
it impossible to handle them correctly (e.g. mark instructions are depending
on a floating-point status and control register, or mark instructions as
possibly trapping).
This patch allows the target to use setOperationAction to switch the action
on ISD::STRICT_ nodes to Legal. If this is done, the SelectionDAG common code
will stop converting the STRICT nodes to regular floating-point nodes, but
instead pass the STRICT nodes to the target using normal SelectionDAG
matching rules.
To avoid having the back-end duplicate all the floating-point instruction
patterns to handle both strict and non-strict variants, we make the MI
codegen explicitly aware of the floating-point exceptions by introducing
two new concepts:
- A new MCID flag "mayRaiseFPException" that the target should set on any
instruction that possibly can raise FP exception according to the
architecture definition.
- A new MI flag FPExcept that CodeGen/SelectionDAG will set on any MI
instruction resulting from expansion of any constrained FP intrinsic.
Any MI instruction that is *both* marked as mayRaiseFPException *and*
FPExcept then needs to be considered as raising exceptions by MI-level
codegen (e.g. scheduling).
Setting those two new flags is straightforward. The mayRaiseFPException
flag is simply set via TableGen by marking all relevant instruction
patterns in the .td files.
The FPExcept flag is set in SDNodeFlags when creating the STRICT_ nodes
in the SelectionDAG, and gets inherited in the MachineSDNode nodes created
from it during instruction selection. The flag is then transfered to an
MIFlag when creating the MI from the MachineSDNode. This is handled just
like fast-math flags like no-nans are handled today.
This patch includes both common code changes required to implement the
new features, and the SystemZ implementation.
Reviewed By: andrew.w.kaylor
Differential Revision: https://reviews.llvm.org/D55506
llvm-svn: 362663
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
