This patch removes all of the Set.* methods from Status.
This cleanup is part of a series of patches that make it harder use the
anti-pattern of keeping a long-lives Status object around and updating
it while dropping any errors it contains on the floor.
This patch is largely NFC, the more interesting next steps this enables
is to:
1. remove Status.Clear()
2. assert that Status::operator=() never overwrites an error
3. remove Status::operator=()
Note that step (2) will bring 90% of the benefits for users, and step
(3) will dramatically clean up the error handling code in various
places. In the end my goal is to convert all APIs that are of the form
` ResultTy DoFoo(Status& error)
`
to
` llvm::Expected<ResultTy> DoFoo()
`
How to read this patch?
The interesting changes are in Status.h and Status.cpp, all other
changes are mostly
` perl -pi -e 's/\.SetErrorString/ = Status::FromErrorString/g' $(git
grep -l SetErrorString lldb/source)
`
plus the occasional manual cleanup.
This reverts commit 05f0e86cc895181b3d2210458c78938f83353002.
The debuginfo dexter tests are failing, probably because the way
stepping over breakpoints has changed with my patches. And there
are two API tests fails on the ubuntu-arm (32-bit) bot. I'll need
to investigate both of these, neither has an obvious failure reason.
lldb today has two rules: When a thread stops at a BreakpointSite, we
set the thread's StopReason to be "breakpoint hit" (regardless if we've
actually hit the breakpoint, or if we've merely stopped *at* the
breakpoint instruction/point and haven't tripped it yet). And second,
when resuming a process, any thread sitting at a BreakpointSite is
silently stepped over the BreakpointSite -- because we've already
flagged the breakpoint hit when we stopped there originally.
In this patch, I change lldb to only set a thread's stop reason to
breakpoint-hit when we've actually executed the instruction/triggered
the breakpoint. When we resume, we only silently step past a
BreakpointSite that we've registered as hit. We preserve this state
across inferior function calls that the user may do while stopped, etc.
Also, when a user adds a new breakpoint at $pc while stopped, or changes
$pc to be the address of a BreakpointSite, we will silently step past
that breakpoint when the process resumes. This is purely a UX call, I
don't think there's any person who wants to set a breakpoint at $pc and
then hit it immediately on resuming.
One non-intuitive UX from this change, but I'm convinced it is
necessary: If you're stopped at a BreakpointSite that has not yet
executed, you `stepi`, you will hit the breakpoint and the pc will not
yet advance. This thread has not completed its stepi, and the thread
plan is still on the stack. If you then `continue` the thread, lldb will
now stop and say, "instruction step completed", one instruction past the
BreakpointSite. You can continue a second time to resume execution. I
discussed this with Jim, and trying to paper over this behavior will
lead to more complicated scenarios behaving non-intuitively. And mostly
it's the testsuite that was trying to instruction step past a breakpoint
and getting thrown off -- and I changed those tests to expect the new
behavior.
The bugs driving this change are all from lldb dropping the real stop
reason for a thread and setting it to breakpoint-hit when that was not
the case. Jim hit one where we have an aarch64 watchpoint that triggers
one instruction before a BreakpointSite. On this arch we are notified of
the watchpoint hit after the instruction has been unrolled -- we disable
the watchpoint, instruction step, re-enable the watchpoint and collect
the new value. But now we're on a BreakpointSite so the watchpoint-hit
stop reason is lost.
Another was reported by ZequanWu in
https://discourse.llvm.org/t/lldb-unable-to-break-at-start/78282 we
attach to/launch a process with the pc at a BreakpointSite and
misbehave. Caroline Tice mentioned it is also a problem they've had with
putting a breakpoint on _dl_debug_state.
The change to each Process plugin that does execution control is that
1. If we've stopped at a BreakpointSite that has not been executed yet,
we will call Thread::SetThreadStoppedAtUnexecutedBP(pc) to record
that. When the thread resumes, if the pc is still at the same site, we
will continue, hit the breakpoint, and stop again.
2. When we've actually hit a breakpoint (enabled for this thread or not),
the Process plugin should call Thread::SetThreadHitBreakpointSite().
When we go to resume the thread, we will push a step-over-breakpoint
ThreadPlan before resuming.
The biggest set of changes is to StopInfoMachException where we
translate a Mach Exception into a stop reason. The Mach exception codes
differ in a few places depending on the target (unambiguously), and I
didn't want to duplicate the new code for each target so I've tested
what mach exceptions we get for each action on each target, and
reorganized StopInfoMachException::CreateStopReasonWithMachException to
document these possible values, and handle them without specializing
based on the target arch.
rdar://123942164
We need to generate events when finalizing, or we won't know that we
succeeded in stopping the process to detach/kill. Instead, we stall and
then after our 20 interrupt timeout, we kill the process (even if we
were supposed to detach) and exit.
OTOH, we have to not generate events when the Process is being
destructed because shared_from_this has already been torn down, and
using it will cause crashes.
Similar to my previous patch (#71613) where I changed
`GetItemAtIndexAsString`, this patch makes the same change to
`GetItemAtIndexAsDictionary`.
`GetItemAtIndexAsDictionary` now returns a std::optional that is either
`std::nullopt` or is a valid pointer. Therefore, if the optional is
populated, we consider the pointer to always be valid (i.e. no need to
check pointer validity).
This patch should fix a test failure in
`Expr/TestIRMemoryMapWindows.test`:
https://lab.llvm.org/buildbot/#/builders/219/builds/6786
The problem here is that since 7991412 landed, all the
`ScriptInterpreter::CreateScripted*Interface` now return a `nullptr`
when using the base `ScriptInterpreter` instance, instead of
`ScriptInterpreterPython` for instance.
This nullptr is actually well handled in the various places where we
create a Scripted Interface, however, because of the way to instanciate
a process, the process plugin manager have to iterate over every process
plugin and call the `CreateInstance` static function that should
instanciate the right object.
So in the ScriptedProcess case, because we are getting a `nullptr` when
trying to create a `ScriptedProcessInterface`, we try to discard the
process object, which calls the Process destructor, which in turns calls
the `ScriptedProcess` plugin `IsAlive` method. That method will fire an
assertion if the scripted interface pointer is not allocated.
This patch address that issue by setting a flag when destroying the
ScriptedProcess object, and checks that flag when calling `IsAlive`.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch should fix some assertion that started getting hit after f22d82c.
That commit changed the scripted object plugin creation to use
`llvm::Expected<T>` as a return type to enforce error handling, however
I forgot to handle the error which caused the assert.
The interesting part about this, is that since that assert was triggered
in the ScriptedProcess constructor (where the `llvm::Error` wasn't
handled), that impacted every test that launched any kind of process,
since the process plugin manager would eventually also iterate over the
`ScriptedProcess::Create` factory method.
This patch should fix the assertions by handling the errors.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch changes the way plugin objects used with Scripted Interfaces
are created.
Instead of implementing a different SWIG method to create the object for
every scripted interface, this patch makes the creation more generic by
re-using some of the ScriptedPythonInterface templated Dispatch code.
This patch also improves error handling of the object creation by
returning an `llvm::Expected`.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch attempts to fix a dead lock when loading modules in a Scripted
Process.
This issue was triggered by loading the modules after the process did resume,
but before the process actually stop, causing the language runtime mutex to
be locked by a separate thread, responsible to unwind the stack (using
the runtime unwind plan), while the module loading thread was trying to
notify the runtimes of the newly loaded module.
To address that, this patch moves the module loading logic to be done before
sending the stop event, to prevent the dead lock situation described above.
Differential Revision: https://reviews.llvm.org/D154649
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch should address the failure of TestStackCoreScriptedProcess
that is happening specifically on x86_64.
It turns out that in 1370a1cb5b97, I changed the way we extract integers
from a `StructuredData::Dictionary` and in order to get a stop info from
the scripted process, we call a method that returns a `SBStructuredData`
containing the stop reason data.
TestStackCoreScriptedProcess` was failing specifically on x86_64 because
the stop info dictionary contains the signal number, that the `Scripted
Thread` was trying to extract as a signed integer where it was actually
parsed as an unsigned integer. That caused `GetValueForKeyAsInteger` to
return the default value parameter, `LLDB_INVALID_SIGNAL_NUMBER`.
This patch address the issue by extracting the signal number with the
appropriate type and re-enables the test.
Differential Revision: https://reviews.llvm.org/D152848
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
I want to add some error handling to DynamicRegisterInfo because there
are many operations that can fail and many of these operations do not
give meaningful information back to the caller.
To begin that process, I want to add a static method that is responsible
for creating a DynamicRegisterInfo from a StructuredData::Dictionary
(and ArchSpec). This is meant to replace the equivalent constructor
because constructors are ill-equipped to perform error handling.
Differential Revision: https://reviews.llvm.org/D152594
This patch should address the failure of TestStackCoreScriptedProcess
that is happening specifically on x86_64.
It turns out that in 1370a1cb5b97, I changed the way we extract integers
from a `StructuredData::Dictionary` and in order to get a stop info from
the scripted process, we call a method that returns a `SBStructuredData`
containing the stop reason data.
TestStackCoreScriptedProcess` was failing specifically on x86_64 because
the stop info dictionary contains the signal number, that the `Scripted
Thread` was trying to extract as a signed integer where it was actually
parsed as an unsigned integer. That caused `GetValueForKeyAsInteger` to
return the default value parameter, `LLDB_INVALID_SIGNAL_NUMBER`.
This patch address the issue by extracting the signal number with the
appropriate type and re-enables the test.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch adds support to eStopReasonTrace to Scripted Threads.
This is necessary when using a Scrited Process with a Scripted Thread
Plan to report a special thread stop reason to the thread plan.
rdar://109425542
Differential Revision: https://reviews.llvm.org/D151043
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch refactors the `StructuredData::Integer` class to make it
templated, makes it private and adds 2 public specialization for both
`int64_t` & `uint64_t` with a public type aliases, respectively
`SignedInteger` & `UnsignedInteger`.
It adds new getter for signed and unsigned interger values to the
`StructuredData::Object` base class and changes the implementation of
`StructuredData::Array::GetItemAtIndexAsInteger` and
`StructuredData::Dictionary::GetValueForKeyAsInteger` to support signed
and unsigned integers.
This patch also adds 2 new `Get{Signed,Unsigned}IntegerValue` to the
`SBStructuredData` class and marks `GetIntegerValue` as deprecated.
Finally, this patch audits all the caller of `StructuredData::Integer`
or `StructuredData::GetIntegerValue` to use the proper type as well the
various tests that uses `SBStructuredData.GetIntegerValue`.
rdar://105575764
Differential Revision: https://reviews.llvm.org/D150485
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch improves breakpoint management when doing interactive
scripted process debugging.
In other to know which process set a breakpoint, we need to do some book
keeping on the multiplexer scripted process. When initializing the
multiplexer, we will first copy breakpoints that are already set on the
driving target.
Everytime we launch or resume, we should copy breakpoints from the
multiplexer to the driving process.
When creating a breakpoint from a child process, it needs to be set both
on the multiplexer and on the driving process. We also tag the created
breakpoint with the name and pid of the originator process.
This patch also implements all the requirement to achieve proper
breakpoint management. That involves:
- Adding python interator for breakpoints and watchpoints in SBTarget
- Add a new `ScriptedProcess.create_breakpoint` python method
Differential Revision: https://reviews.llvm.org/D148548
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch adds support for breakpoint setting to Scripted Processes.
For now, Scripted Processes only support setting software breakpoints.
When doing interactive scripted process debugging, it makes use of the
memory writing capability to write the trap opcodes in the memory of the
driving process. However the real process' target doesn't keep track of
the breakpoints that got added by the scripted process. This is a design
that we might need to change in the future, since we'll probably need to
do some book keeping to handle breakpoints that were set by different
scripted processes.
Differential Revision: https://reviews.llvm.org/D145296
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
While debugging a Scripted Process, in order to update its state and
work nicely with lldb's execution model, it needs to toggle its private
state from running to stopped, which will result in broadcasting a
process state changed event to the debugger listener.
Originally, this state update was done systematically in the Scripted
Process C++ plugin, however in order to make scripted process
interactive, we need to be able to update their state dynamically.
This patch makes use of the recent addition of the
SBProcess::ForceScriptedState to programatically, and moves the
process private state update to the python implementation of the resume
method instead of doing it in ScriptedProcess::DoResume.
This patch also removes the unused ShouldStop & Stop scripted
process APIs, and adds new ScriptedInterface transform methods for
boolean arguments. This allow the user to programmatically decide if
after running the process, we should stop it (which is the default setting).
Differential Revision: https://reviews.llvm.org/D145295
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch introduces a new method to the SBProcess API called
ForceScriptedState. As the name suggests, this affordance will allow the
user to alter the state of the scripted process programatically.
This is necessary to update the scripted process state when perform
interactive debugging.
Differential Revision: https://reviews.llvm.org/D145294
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch should fix an assertion that causes some test failures:
https://ci.swift.org/view/LLDB/job/llvm-org-lldb-release-debuginfo/3587/console
This was caused by the changes introduces in `88f409194d5a` where we
replaced `DidLaunch` by `DidResume` in the `ScriptedProcess` class.
However, by the time we resume the process, the pid should be already
set. To address this, this patch brings back `DidLaunch` which will
initialize the ScriptedProcess pid with a placeholder value. That value
will be updated in `DidResume` to the final pid.
Note, this 2 stage PID initialization is necessary sometimes, when the
scripted process gets stopped at entry (launch) and gets assigned an
object that contains the PID value. In this case, we need to update the
PID when we resume the process after we've stopped at entry.
This also replaces the default scripted process id to an arbitrary
number (42) since the current value (0) is considered invalid.
Differential Revision: https://reviews.llvm.org/D148153
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Now that we can pass Python objects to the scripted process instance, we
don't need to parse the crashlog twice anymore.
Differential revision: https://reviews.llvm.org/D148063
../llvm-project/lldb/include/lldb/Interpreter/ScriptedProcessInterface.h:61:12:
warning: implicit conversion from 'unsigned long long' to 'size_t' (aka 'unsigned int')
changes value from 18446744073709551615 to 4294967295 [-Wconstant-conversion]
../llvm-project/lldb/source/Plugins/Process/scripted/ScriptedProcess.cpp:275:39:
warning: result of comparison of constant 18446744073709551615 with expression
of type 'size_t' (aka 'unsigned int') is always false [-Wtautological-constant-out-of-range-compare]
This happens because size_t on 32 bit is 32 bit, but LLDB_INVALID_OFFSET is
UINT64_MAX. Return lldb::offset_t instead, which is 64 bit everywhere.
DoWriteMemory still returns size_t but this is because every other
Process derived thing does that. As long as the failure check works I think
it should be fine.
Reviewed By: mib
Differential Revision: https://reviews.llvm.org/D146124
This patch moves `ScriptedMetadata.h` from the `Interpreter` directory to
the `Utility` sub-directory since `ProcessInfo.h` depends on it.
It also gets rid of the unused `OptionGroupPythonClassWithDict`
constructor for `ScriptedMetadata` which would address the layering
violation.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch adds support for breakpoint setting to Scripted Processes.
For now, Scripted Processes only support setting software breakpoints.
When doing interactive scripted process debugging, it makes use of the
memory writing capability to write the trap opcodes in the memory of the
driving process. However the real process' target doesn't keep track of
the breakpoints that got added by the scripted process. This is a design
that we might need to change in the future, since we'll probably need to
do some book keeping to handle breakpoints that were set by different
scripted processes.
Differential Revision: https://reviews.llvm.org/D145296
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
While debugging a Scripted Process, in order to update its state and
work nicely with lldb's execution model, it needs to toggle its private
state from running to stopped, which will result in broadcasting a
process state changed event to the debugger listener.
Originally, this state update was done systematically in the Scripted
Process C++ plugin, however in order to make scripted process
interactive, we need to be able to update their state dynamically.
This patch makes use of the recent addition of the
`SBProcess::ForceScriptedState` to programatically, and moves the
process private state update to the python implementation of the `resume`
method instead of doing it in `ScriptedProcess::DoResume`.
This patch also removes the unused `ShouldStop` & `Stop` scripted
process APIs, and adds new ScriptedInterface transform methods for
boolean arguments. This allow the user to programmatically decide if
after running the process, we should stop it (which is the default setting).
Differential Revision: https://reviews.llvm.org/D145295
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch introduces a new method to the SBProcess API called
ForceScriptedState. As the name suggests, this affordance will allow the
user to alter the private state of the scripted process programatically.
This is necessary to update the scripted process state when perform
interactive debugging.
Differential Revision: https://reviews.llvm.org/D145294
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch adds memory writing capabilities to the Scripted Process plugin.
This allows to user to get a target address and a memory buffer on the
python scripted process implementation that the user can make processing
on before performing the actual write.
This will also be used to write trap instruction to a real process
memory to set a breakpoint.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch adds process attach capabilities to the ScriptedProcess
plugin. This doesn't really expects a PID or process name, since the
process state is already script, however, this allows to create a
scripted process without requiring to have an executuble in the target.
In order to do so, this patch also turns the scripted process related
getters and setters from the `ProcessLaunchInfo` and
`ProcessAttachInfo` classes to a `ScriptedMetadata` instance and moves
it in the `ProcessInfo` class, so it can be accessed interchangeably.
This also adds the necessary SWIG wrappers to convert the internal
`Process{Attach,Launch}InfoSP` into a `SB{Attach,Launch}Info` to pass it
as argument the scripted process python implementation and convert it
back to the internal representation.
rdar://104577406
Differential Revision: https://reviews.llvm.org/D143104
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch should address a bug when a user have multiple scripted
processes in the same debugging session.
In order for the scripted process plugin to be able to call into the
scripted object instance methods to fetch the necessary data to
reconstruct its state, the scripted process plugin calls into a
scripted process interface, that has a reference to the created script
object instance.
However, prior to this patch, we only had a single instance of the
scripted process interface, living the script interpreter. So every time
a new scripted process plugin was created, it would overwrite the script
object instance that was held by the single scripted process interface
in the script interpreter.
That would cause all the method calls made to the scripted process
interface to be dispatched by the last instanciated script object
instance, which is wrong.
In order to prevent that, this patch moves the scripted process
interface reference to be help by the scripted process plugin itself.
rdar://104882562
Differential Revision: https://reviews.llvm.org/D143308
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch introduces a new `GetScriptedImplementation` method to the
SBProcess class in the SBAPI. It will allow users of Scripted Processes to
fetch the scripted implementation object from to script interpreter to be
able to interact with it directly (without having to go through lldb).
This allows to user to perform action that are not specified in the
scripted process interface, like calling un-specified methods, but also
to enrich the implementation, by passing it complex objects.
Differential Revision: https://reviews.llvm.org/D143236
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch enhances queue support in Scripted Processes.
Scripted Threads could already report their queue name if they had one,
but this information was only surfaced when getting the process and
thread status.
However, no queue was create and added to the scripted process queue
list. This patch improves that by creating a queue from the scripted
thread queue name. For now, it uses an invalid queue id, since the
scripted thread doesn't expose this capability yet, but this could
easily be supported if the queue id information is available.
rdar://98844004
Differential Revision: https://reviews.llvm.org/D139853
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch moves the ScriptedProcessInfo class out of the
ScriptedProcess and hoist it as a standalone interpreter class, so it can be
reused with the Scripted Platform.
Differential Revision: https://reviews.llvm.org/D139247
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
For an exception crashlog, the thread backtraces aren't usually very helpful
and instead, developpers look at the "Application Specific Backtrace" that
was generated by `objc_exception_throw`.
LLDB could already parse and symbolicate these Application Specific Backtraces
for regular textual-based crashlog, so this patch adds support to parse them
in JSON crashlogs, and materialize them a HistoryThread extending the
crashed ScriptedThread.
This patch also includes the Application Specific Information messages
as part of the process extended crash information log. To do so, the
ScriptedProcess Python interface has a new GetMetadata method that
returns an arbitrary dictionary with data related to the process.
rdar://93207586
Differential Revision: https://reviews.llvm.org/D126260
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
I went over the output of the following mess of a command:
(ulimit -m 2000000; ulimit -v 2000000; git ls-files -z | parallel
--xargs -0 cat | aspell list --mode=none --ignore-case | grep -E
'^[A-Za-z][a-z]*$' | sort | uniq -c | sort -n | grep -vE '.{25}' |
aspell pipe -W3 | grep : | cut -d' ' -f2 | less)
and proceeded to spend a few days looking at it to find probable typos
and fixed a few hundred of them in all of the llvm project (note, the
ones I found are not anywhere near all of them, but it seems like a
good start).
Differential revision: https://reviews.llvm.org/D131122
This patch improve exception reporting when loading a crash report in a
scripted process. Now, we parse the `exception` dictionary from the
crash report use it the create a higher fidelity `MachException` stop info.
This patch also updates the test to reflect that change.
rdar://97096486
Differential Revision: https://reviews.llvm.org/D131086
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Make constructors of the Process and its subclasses class protected,
to prevent accidentally constructing Process on stack when it could be
afterwards accessed via a shared_ptr (since it uses
std::enable_shared_from_this<>).
The only place where a stack allocation was used were unittests,
and fixing them via declaring an explicit public constructor
in the respective mock classes is trivial.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D131275
With Scripted Processes, in order to create scripted threads, the blueprint
provides a dictionary that have each thread index as the key with the respective
thread instance as the pair value.
In Python, this is fine because a dictionary key can be of any type including
integer types:
```
>>> {1: "one", 2: "two", 10: "ten"}
{1: 'one', 2: 'two', 10: 'ten'}
```
However, when the python dictionary gets bridged to C++ we convert it to a
`StructuredData::Dictionary` that uses a `std::map<ConstString, ObjectSP>`
for storage.
Because `std::map` is an ordered container and ours uses the `ConstString`
type for keys, the thread indices gets converted to strings which makes the
dictionary sorted alphabetically, instead of numerically.
If the ScriptedProcess has 10 threads or more, it causes thread “10”
(and higher) to be after thread “1”, but before thread “2”.
In order to solve this, this sorts the thread info dictionary keys
numerically, before iterating over them to create ScriptedThreads.
rdar://90327854
Differential Revision: https://reviews.llvm.org/D122429
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch introduces a new way to load modules programatically with
Scripted Processes. To do so, the scripted process blueprint holds a
list of dictionary describing the modules to load, which their path or
uuid, load address and eventually a slide offset.
LLDB will fetch that list after launching the ScriptedProcess, and
iterate over each entry to create the module that will be loaded in the
Scripted Process' target.
The patch also refactors the StackCoreScriptedProcess test to stop
inside the `libbaz` module and make sure it's loaded correctly and that
we can fetch some variables from it.
rdar://74520238
Differential Revision: https://reviews.llvm.org/D120969
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch replaces the calls to ErrorWithMessage using the GetInterface
message by a call to the static method directly.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch introduces a new type of ScriptedProcess: CrashLogScriptedProcess.
It takes advantage of lldb's crashlog parsers and Scripted Processes to
reconstruct a static debugging session with symbolicated stackframes, instead
of just dumping out everything in the user's terminal.
The crashlog command also has an interactive mode that only provide a
very limited experience. This is why this patch removes all the logic
for this interactive mode and creates CrashLogScriptedProcess instead.
This will fetch and load all the libraries that were used by the crashed
thread and re-create all the frames artificially.
rdar://88721117
Differential Revision: https://reviews.llvm.org/D119501
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch adds the ability for ScriptedThread to load artificial stack
frames. To do so, the interpreter instance can create a list that will
contain the frame index and its pc address.
Then, when the Scripted Process plugin stops, it will refresh its
Scripted Threads state by invalidating their register context and load
to list from the interpreter object and reconstruct each frame.
This patch also removes all of the default implementation for
`get_stackframes` from the derived ScriptedThread classes, and add the
interface code for the Scripted Thread Interface.
rdar://88721095
Differential Revision: https://reviews.llvm.org/D119388
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
