ConstString can be implicitly converted into a llvm::StringRef. This is
very useful in many places, but it also hides places where we are
creating a ConstString only to use it as a StringRef for the entire
lifespan of the ConstString object.
I locally removed the implicit conversion and found some of the places we
were doing this.
Differential Revision: https://reviews.llvm.org/D159237
This is the next step in removing ConstString from StructuredData. There
are StringRef overloads already, let's use those where we can.
Differential Revision: https://reviews.llvm.org/D152870
There's no reason for GetSignalInfo to return the signal name. All users
of this method only use the return value to determine if the method
succeeded in filling in the output parameters, so let's explicitly make
it a bool instead of a pointer.
Differential Revision: https://reviews.llvm.org/D158457
Thread sanitizer reports a data race in Process.cpp in the usage of
m_process_input_reader. Fix this data race by introducing a mutex
guarding the access to this variable.
Differential Revision: https://reviews.llvm.org/D157648
ThreadSanitizer reports the following issue:
```
Write of size 8 at 0x00010a70abb0 by thread T3 (mutexes: write M0):
#0 lldb_private::ThreadList::Update(lldb_private::ThreadList&) ThreadList.cpp:741 (liblldb.18.0.0git.dylib:arm64+0x5dedf4) (BuildId: 9bced2aafa373580ae9d750d9cf79a8f32000000200000000100000000000e00)
#1 lldb_private::Process::UpdateThreadListIfNeeded() Process.cpp:1212 (liblldb.18.0.0git.dylib:arm64+0x53bbec) (BuildId: 9bced2aafa373580ae9d750d9cf79a8f32000000200000000100000000000e00)
Previous read of size 8 at 0x00010a70abb0 by main thread (mutexes: write M1):
#0 lldb_private::ThreadList::GetMutex() const ThreadList.cpp:785 (liblldb.18.0.0git.dylib:arm64+0x5df138) (BuildId: 9bced2aafa373580ae9d750d9cf79a8f32000000200000000100000000000e00)
#1 lldb_private::ThreadList::DidResume() ThreadList.cpp:656 (liblldb.18.0.0git.dylib:arm64+0x5de5c0) (BuildId: 9bced2aafa373580ae9d750d9cf79a8f32000000200000000100000000000e00)
#2 lldb_private::Process::PrivateResume() Process.cpp:3130 (liblldb.18.0.0git.dylib:arm64+0x53cd7c) (BuildId: 9bced2aafa373580ae9d750d9cf79a8f32000000200000000100000000000e00)
```
Fix this by only using the mutex in ThreadList and removing the one in
process entirely.
Differential Revision: https://reviews.llvm.org/D158034
Before the addition of the process "Shadow Listener" you could only have one
Listener observing the Process Broadcaster. That was necessary because fetching the
Process event is what switches the public process state, and for the execution
control logic to be manageable you needed to keep other listeners from causing
this to happen before the main process control engine was ready.
Ismail added the notion of a "ShadowListener" - which allowed you ONE
extra process listener. This patch inverts that setup by designating the
first listener as primary - and giving it priority in fetching events.
Differential Revision: https://reviews.llvm.org/D157556
My primary motivation here is actually to change something in
UnixSignals, but this change is a necesary precondition.
I've also updated the documentation and rewritten the log statements to
use `formatv` instead of `printf` (printf-style formatting and
llvm::StringRef don't mix well).
Differential Revision: https://reviews.llvm.org/D157662
StreamFile subclasses Stream (from lldbUtility) and is backed by a File
(from lldbHost). It does not depend on anything from lldbCore or any of its
sibling libraries, so I think it makes sense for this to live in
lldbHost instead.
Differential Revision: https://reviews.llvm.org/D157460
/data/llvm-project/lldb/source/Interpreter/OptionValue.cpp:28:3: error: 'scoped_lock' may not intend to support class template argument deduction [-Werror,-Wctad-maybe-unsupported]
std::scoped_lock lock(m_mutex, other.m_mutex);
^
/opt/rh/gcc-toolset-12/root/usr/lib/gcc/x86_64-redhat-linux/12/../../../../include/c++/12/mutex:692:11: note: add a deduction guide to suppress this warning
class scoped_lock
^
1 error generated.
/data/llvm-project/lldb/source/Target/ThreadList.cpp:739:5: error: 'scoped_lock' may not intend to support class template argument deduction [-Werror,-Wctad-maybe-unsupported]
std::scoped_lock guard(GetMutex(), rhs.GetMutex());
^
/opt/rh/gcc-toolset-12/root/usr/lib/gcc/x86_64-redhat-linux/12/../../../../include/c++/12/mutex:692:11: note: add a deduction guide to suppress this warning
class scoped_lock
^
1 error generated.
ThreadList::Update is being caught by thread sanitizer. There's even a
comment on the function that both mutexes should be lock (even though
only the "this" mutex was actually being locked). Fix this by locking
both mutexes.
Differential Revision: https://reviews.llvm.org/D157153
The comment after the radar link already explains the issue. There's no
additional information in the radar and has been marked as closed by the
corresponding code change. This commit removes the link and reflows the
comment.
Increase the default timeouts when running under ASan. We had something
similar before we adopted tablegen, but the larger timeouts got lost in
the transition, possibly because tablegen's preprocessor support is very
limited. This patch passes a new define (LLDB_SANITIZED) to
lldb-tablegen on which we can base the default value.
Differential revision: https://reviews.llvm.org/D156279
This is an enhancement for the locate module callback.
https://discourse.llvm.org/t/rfc-python-callback-for-target-get-module/71580/6
On Android remote platform, module UUID is resolved by
Platform::GetRemoteSharedModule. Which means the current
Target::CallLocateModuleCallbackIfSet() call undesirably is not able to pass the
module UUID to the locate module callback.
This diff moves the CallLocateModuleCallbackIfSet() implementation from Target
to Platform to allows both Target and Platform can call it. One is from the
current Target call site, and second is from Platform after resolving the module
UUID.
As the result of this change, the locate module callback may be called twice
for a same module on remote platforms. And it should be ok.
- First, without UUID.
- The locate module callback is allowed to return an error
if the callback requires UUID.
- Second, with UUID, if the first callback call did not return a module.
Differential Revision: https://reviews.llvm.org/D156066
Reading through the Watchpoint class, I found this method
that wasn't being used properly, and a couple of ivars that
weren't used at all. Cleanup.
Differential Revision: https://reviews.llvm.org/D155768
This reverts commit df054499c35cdda02b196b2ca5c0a326abdc0a29.
Reverting because of build errors
In file included from /Users/buildslave/jenkins/workspace/as-lldb-cmake/llvm-project/lldb/source/API/SBPlatform.cpp:19:
/Users/buildslave/jenkins/workspace/as-lldb-cmake/llvm-project/lldb/include/lldb/Target/Target.h:1035:18: warning: parameter 'merged' not found in the function declaration [-Wdocumentation]
This reverts commit 7f1028e9df52b4e7246f189a24684b1ca8c9bfbe.
This is because test failures
lldb-unit.Target/_/TargetTests/LocateModuleCallbackTest.GetOrCreateModuleWithCachedModule
lldb-unit.Target/_/TargetTests/LocateModuleCallbackTest.GetOrCreateModuleWithCachedModuleAndBreakpadSymbol
These methods all take a `Stream *` to get feedback about what's going
on. By default, it's a nullptr, but we always feed it with a valid
pointer. It would therefore make more sense to have this take a
reference.
Differential Revision: https://reviews.llvm.org/D154883
Also, make it possible for new Targets which haven't been added to
the TargetList yet to check for interruption, and add a few more
places in building modules where we can check for interruption.
Differential Revision: https://reviews.llvm.org/D154542
Fix incorrect uses of formatv specifiers in LLDB_LOG. Unlike Python,
arguments must be numbered. All the affected log statements take
llvm:Errors so use the LLDB_LOG_ERROR macro instead.
Differential revision: https://reviews.llvm.org/D154532
Fix incorrect uses of LLDB_LOG_ERROR. The macro doesn't automatically
inject the error in the log message: it merely passes the error as the
first argument to formatv and therefore must be referenced with {0}.
Thanks to Nicholas Allegra for collecting a list of places where the
macro was misused.
rdar://111581655
Differential revision: https://reviews.llvm.org/D154530
This patch should fix some data races when a python script (i.e. a
Scripted Process) has a nested call to another python script (i.e. a
OperatingSystem Plugin), which can cause concurrent writes to the python
lock count.
This patch also fixes a data race happening when resetting the operating
system unique pointer.
To address these issues, both accesses is guarded by a mutex.
rdar://109413039
Differential Revision: https://reviews.llvm.org/D154271
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
Instead of just returning a raw `const char *`, I think llvm::StringRef
would make more sense. Most of the time that we use the return value of
`GetProcessPluginName` we're passing it to `CreateProcess` which takes a
StringRef anyway.
Differential Revision: https://reviews.llvm.org/D153825
Previously lldb was using arrays of size kMaxRegisterByteSize to handle
registers. This was set to 256 because the largest possible register
we support is Arm's scalable vectors (SVE) which can be up to 256 bytes long.
This means for most operations aside from SVE, we're wasting 192 bytes
of it. Which is ok given that we don't have to pay the cost of a heap
alocation and 256 bytes isn't all that much overall.
With the introduction of the Arm Scalable Matrix extension there is a new
array storage register, ZA. This register is essentially a square made up of
SVE vectors. Therefore ZA could be up to 64kb in size.
https://developer.arm.com/documentation/ddi0616/latest/
"The Effective Streaming SVE vector length, SVL, is a power of two in the range 128 to 2048 bits inclusive."
"The ZA storage is architectural register state consisting of a two-dimensional ZA array of [SVLB × SVLB] bytes."
99% of operations will never touch ZA and making every stack frame 64kb+ just
for that slim chance is a bad idea.
Instead I'm switching register handling to use SmallVector with a stack allocation
size of kTypicalRegisterByteSize. kMaxRegisterByteSize will be used in places
where we can't predict the size of register we're reading (in the GDB remote client).
The result is that the 99% of small register operations can use the stack
as before and the actual ZA operations will move to the heap as needed.
I tested this by first working out -wframe-larger-than values for all the
libraries using the arrays previously. With this change I was able to increase
kMaxRegisterByteSize to 256*256 without hitting those limits. With the
exception of the GDB server which needs to use a max size buffer.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D153626
I removed ConstString from OptionValueProperties in 643ba926c1f6, but
there are a few call sites that still create a ConstString as an
argument. I did not catch these initially because ConstString has an
implicit conversion method to StringRef.
Differential Revision: https://reviews.llvm.org/D153673
The use of ConstString in StructuredDataPlugin is unneccessary as fast
comparisons are not neeeded for StructuredDataPlugins.
Differential Revision: https://reviews.llvm.org/D153482
This will be used by the "register info" command to show
the layout of register contents. For example if we have
these fields coming in from XML:
```
<field name="D" start="0" end="7"/>
<field name="C" start="8" end="15"/>
<field name="B" start="16" end="23"/>
<field name="A" start="24" end="31"/>
```
We get:
```
| 31-24 | 23-16 | 15-8 | 7-0 |
|-------|-------|------|-----|
| A | B | C | D |
```
Note that this is only the layout, not the values.
For values, use "register read".
The tables' columns are center padded (left bias
if there's an odd padding) and will wrap if the terminal width
is too low.
```
| 31-24 | 23-16 |
|-------|-------|
| A | B |
| 15-8 | 7-0 |
|------|-----|
| C | D |
```
This means we match the horizontal format seen in many architecture
manuals but don't spam the user with lots of misaligned text when the
output gets very long.
Reviewed By: jasonmolenda
Differential Revision: https://reviews.llvm.org/D152917
https://github.com/llvm/llvm-project/issues/62750
I setup a simple test with a large .so (~100MiB) that was only present on the target machine
but not present on the local machine, and ran a lldb server on the target and connectd to it.
LLDB properly downloads the file from the remote, but it does so at a very slow speed, even over a hardwired 1Gbps connection!
Increasing the buffer size for downloading these helps quite a bit.
Test setup:
```
$ cat gen.py
print('const char* hugeglobal = ')
for _ in range(1000*500):
print(' "' + '1234'*50 + '"')
print(';')
print('const char* mystring() { return hugeglobal; }')
$ gen.py > huge.c
$ mkdir libdir
$ gcc -fPIC huge.c -Wl,-soname,libhuge.so -o libdir/libhuge.so -shared
$ cat test.c
#include <string.h>
#include <stdio.h>
extern const char* mystring();
int main() {
printf("%d\n", strlen(mystring()));
}
$ gcc test.c -L libdir -l huge -Wl,-rpath='$ORIGIN' -o test
$ rsync -a libdir remote:~/
$ ssh remote bash -c "cd ~/libdir && /llvm/buildr/bin/lldb-server platform --server --listen '*:1234'"
```
in another terminal
```
$ rm -rf ~/.lldb # clear cache
$ cat connect.lldb
platform select remote-linux
platform connect connect://10.0.0.14:1234
file test
b main
r
image list
c
q
$ time /llvm/buildr/bin/lldb --source connect.lldb
```
Times with various buffer sizes:
1kiB (current): ~22s
8kiB: ~8s
16kiB: ~4s
32kiB: ~3.5s
64kiB: ~2.8s
128kiB: ~2.6s
256kiB: ~2.1s
512kiB: ~2.1s
1MiB: ~2.1s
2MiB: ~2.1s
I choose 512kiB from this list as it seems to be the place where the returns start diminishing and still isn't that much memory
My understanding of how this makes such a difference is ReadFile issues a request for each call, and larger buffer means less round trip times. The "ideal" situation is ReadFile() being async and being able to issue multiple of these, but that is much more work for probably little gains.
NOTE: this is my first contribution, so wasn't sure who to choose as a reviewer. Greg Clayton seems to be the most appropriate of those in CODE_OWNERS.txt
Reviewed By: clayborg, jasonmolenda
Differential Revision: https://reviews.llvm.org/D153060
To aid in integration testing/debugging. Verifying that the address
mask/addressable bits values from different sources are correctly
registered by lldb.
I want to add some error handling to DynamicRegisterInfo because there
are many operations that can fail and many of these operations do not
give meaningful information back to the caller.
To begin that process, I want to add a static method that is responsible
for creating a DynamicRegisterInfo from a StructuredData::Dictionary
(and ArchSpec). This is meant to replace the equivalent constructor
because constructors are ill-equipped to perform error handling.
Differential Revision: https://reviews.llvm.org/D152594
Some Darwin corefiles can have the pc/fp/sp/lr in the
live register context signed with pointer authentication;
this patch changes RegisterContextUnwind to strip those
bits off of those values as we try to walk the stack.
Differential Revision: https://reviews.llvm.org/D152861
rdar://109185291
We need to clear non-addressable bits from addresses across
the lldb sources. Currently these need to use an ABI method
to clear those bits from addresses, which you do by taking a
Process, getting the current ABI, then calling the method.
Simplify this by providing methods in Process which call into
the ABI methods themselves.
Differential Revision: https://reviews.llvm.org/D152863
These don't need to be ConstStrings. They don't really benefit much from
deduplication and comparing them isn't on a hot path, so they don't
really benefit much from quick comparisons.
Differential Revision: https://reviews.llvm.org/D152331
In an effort to keep the ConstString StringPool small, I plan on
removing use of ConstString in StructuredData. The only class that
really uses it is StructuredData::Dictionary.
This one was fairly easy to remove, I plan on removing the others in
follow-up changes.
Differential Revision: https://reviews.llvm.org/D152597
Existing callers of `GetChildAtIndex` pass true for can_create. This change
makes true the default value, callers don't have to pass an opaque true.
See also D151966 for the same change to `GetChildMemberWithName`.
Differential Revision: https://reviews.llvm.org/D152031
It turns out all existing callers of `GetChildMemberWithName` pass true for `can_create`.
This change makes `true` the default value, callers don't have to pass an opaque true.
Differential Revision: https://reviews.llvm.org/D151966
The short names of each signal name and alias only exist as ConstStrings
in this one scenario. For example, GetShortName("SIGHUP") will just give
you "HUP". There's not a good reason the string "HUP" needs to be in the
ConstString StringPool, and that's true for just about every signal
name.
Differential Revision: https://reviews.llvm.org/D152582
This patch add the ability for the user to set a label for a target.
This can be very useful when debugging targets with the same executables
in the same session.
Labels can be set either at the target creation in the command
interpreter or at any time using the SBAPI.
Target labels show up in the `target list` output, following the target
index, and they also allow the user to switch targets using them.
rdar://105016191
Differential Revision: https://reviews.llvm.org/D151859
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
