Fixes a corner case of the analysis: previously GlobalValues could be
affected by assumptions, but were not tracked within AffectedValues.
This patch allows assumptions which affect a given GlobalValue to be
looked up via `assumptionsFor()`.
A small update to llvm/test/Analysis/ScalarEvolution/ranges.ll was
necessary due to knowledge about a global value now being propagated
from AssumptionCache -> ValueTracking -> ScalarEvolution.
NFC changes to explicitly specify the type we are matching when creating
Int32 reg. This will allow use to have multiple types mapping those
register without causing ambigous matching.
On AArch64, it is safe to let the linker handle relaxation of
unconditional branches; in most cases, the destination is within range,
and the linker doesn't need to do anything. If the linker does insert
fixup code, it clobbers the x16 inter-procedural register, so x16 must
be available across the branch before linking. If x16 isn't available,
but some other register is, we can relax the branch either by spilling
x16 OR using the free register for a manually-inserted indirect branch.
This patch builds on D145211. While that patch is for correctness, this
one is for performance of the common case. As noted in
https://reviews.llvm.org/D145211#4537173, we can trust the linker to
relax cross-section unconditional branches across which x16 is
available.
Programs that use machine function splitting care most about the
performance of hot code at the expense of the performance of cold code,
so we prioritize minimizing hot code size.
Here's a breakdown of the cases:
Hot -> Cold [x16 is free across the branch]
Do nothing; let the linker relax the branch.
Cold -> Hot [x16 is free across the branch]
Do nothing; let the linker relax the branch.
Hot -> Cold [x16 used across the branch, but there is a free register]
Spill x16; let the linker relax the branch.
Spilling requires fewer instructions than manually inserting an
indirect branch.
Cold -> Hot [x16 used across the branch, but there is a free register]
Manually insert an indirect branch.
Spilling would require adding a restore block in the hot section.
Hot -> Cold [No free regs]
Spill x16; let the linker relax the branch.
Cold -> Hot [No free regs]
Spill x16 and put the restore block at the end of the hot function; let the linker relax the branch.
Ex:
[Hot section]
func.hot:
... hot code...
func.restore:
... restore x16 ...
B func.hot
[Cold section]
func.cold:
... spill x16 ...
B func.restore
Putting the restore block at the end of the function instead of
just before the destination increases the cost of executing the
store, but it avoids putting cold code in the middle of hot code.
Since the restore is very rarely taken, this is a worthwhile
tradeoff.
Differential Revision: https://reviews.llvm.org/D156767
Added a class to hold such common state. The goal is to both reduce the argument list of other utilities used by `computeImportForModule` (which will be brought as members in a subsequent patch), and to make it easy to extend such state later.
Issue Details:
When building up line information for CodeView debug info, LLVM attempts to gather the "range" of instructions within a function as these are printed together in a single record. If there is an inlined function, then those lines are attributed to the original function to enable generating `S_INLINESITE` records. However, this thus requires there to be instructions from the inlining function after the inlined function otherwise the instruction range would not include the inlined function.
Fix Details:
Include any inlined functions when finding the extent of a function in `getFunctionLineEntries`
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D159226
Summary:
if the member file is XCOFF object file and has auxiliary header, the content of the member file need to be aligned at the
MAX(maximum alignment of .text , maximum alignment of .data). The "maximum alignment of .text" and "maximum alignment of .data" are two
field of auxiliary header of XCOFF object file.
Reviewers: James Henderson, Stephen Peckham
Differential Revision: https://reviews.llvm.org/D144872
VPWidenRecipe only needs the opcode to widen, all other information
(flags, debug loc and operands) is already modeled directly via the
recipe.
This removes the remaining uses of the underlying instruction from
VPWidenRecipe::execute.
Currently we hoist conditions from widenable branch which are joined to
the widenable_condition by And operation. E.g if we have
br(WC && (c1 && c2)) we will operate with (c1 && c2) unsplitted.
This patch adds more flexibility to that mechanism by supporting work
with the list of checks parsed from the widenable branch.
On that stage patch doesn't change the logic of checks hoisting. In the
example above we will either hoist both checks [c1, c2] or none of them.
But in the future we would improve that logic analyzing each check
separately.
Reviewed By: anna
Differential Revision: https://reviews.llvm.org/D157689
The current llvm-cov error message for kind `coveragemap_error::malforme`, just gives the issue kind without any reason for what caused the issue. This patch is aimed at improving the llvm-cov error message to help identify what caused the issue.
Reviewed By: MaskRay
Close: https://github.com/llvm/llvm-project/pull/65264
Assuming the ADD is nsw then it may be sign-extended to merge with a SHL op in a similar fold to the existing (shl (add x, c1), c2) -> (add (shl x, c2), c1 << c2) fold.
This is most useful for helping to expose address math for X86, but has also touched several aarch64 test cases as well.
Alive2: https://alive2.llvm.org/ce/z/2UpSbJ
Differential Revision: https://reviews.llvm.org/D159198
SITargetLowering::adjustWritemask calls SelectionDAG::UpdateNodeOperands
to update an EXTRACT_SUBREG node in-place to refer to a new IMAGE_LOAD
instruction, before we delete the old IMAGE_LOAD instruction. But in
UpdateNodeOperands can do CSE on the fly and return a different
EXTRACT_SUBREG node, so the original EXTRACT_SUBREG node would still
exist and would refer to the old deleted IMAGE_LOAD instruction. This
caused errors like:
t31: v3i32,ch = <<Deleted Node!>> # D:1
This target-independent node should have been selected!
UNREACHABLE executed at lib/CodeGen/SelectionDAG/InstrEmitter.cpp:1209!
Fix it by detecting the CSE case and replacing all uses of the original
EXTRACT_SUBREG node with the CSE'd one.
Assuming the ADD is nsw then it may be sign-extended to merge with a SHL op in a similar fold to the existing (shl (add x, c1), c2) -> (add (shl x, c2), c1 << c2) fold.
This is most useful for helping to expose address math for X86, but has also touched several aarch64 test cases as well.
Alive2: https://alive2.llvm.org/ce/z/2UpSbJ
Differential Revision: https://reviews.llvm.org/D159198
In D158086, we limit all floating point scalar move and splat can't fuse
vsetvli with different SEW, and this patch try to relax the constraint
as possible by introducing new SEW demand type:
SEWGreaterThanOrEqualAndLessThan64, that allow SEW fused with larger
SEW, but constraint it can't fused with SEW=64.
Reviewed By: rogfer01
Differential Revision: https://reviews.llvm.org/D158177
This finishes the work of replacing OperandMatchResultTy with
ParseStatus, started in D154101.
As a drive-by change, rename some RegNo variables to just Reg
(a leftover from the days when RegNo had 'unsigned' type).
addi sp, sp, 512 may be used to recover the sp in the epilogue
when stack size is larger than 2047(2^11 - 1), however, it can
not be compressed using C extension, and addi sp, sp, 496 is
able to be compressed, so try to use 496 as the ajust amount of
the fisrt sp if function doesn't need extra instructions after
adjust.
Reviewed By: wangpc
Differential Revision: https://reviews.llvm.org/D159431
ParseStatus is slightly more convenient to use due to implicit
conversion from bool, which allows to do something like:
```
return Error(L, "msg");
```
when with MatchOperandResultTy it had to be:
```
Error(L, "msg");
return MatchOperand_ParseFail;
```
It also has more appropriate name since parse* methods are not only for
parsing operands.
Reviewed By: brad
Differential Revision: https://reviews.llvm.org/D154321
On PPC there are instructions to store element from vector(e.g.
stxsdx/stxsiwx), and these instructions can be leveraged to avoid tail
constant in memset and constant splat array initialization.
This patch tries to explore these opportunities.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D138883
Reductions specified the correct formula in the comments but was
implemented incorrectly.
Ordered reductions formula was refined to be more accurate to actual
hardware.
A llvm-mca test case for reductions is added so that we have a better
idea of how the model is performing.
WriteVFWRedOV_From and WriteVFWRedV_From SchedWrite classes exist
already, but no pseudos were using the ordered SchedWrite. This change
makes it so that the VFWREDOSUM pseudo used the ordered VFW SchedWrite.
Compiling with TLS variables requires -pthread, but if the user omits this
option, the compiler will not show any obvious indication during compilation
that -pthread is needed for programs using TLS variables. Instead, the user will
experience a segmentation fault when running programs with TLS variables in them
and without specifying -pthread.
This patch aims to generate .extern/.ref references to __tls_get_addr[DS] for
local-exec accesses, in order to trigger an error from the linker to indicate
that there is an undefined symbol to __tls_get_addr. Doing so will remind the
user to compile/link with -pthread.
Differential Revision: https://reviews.llvm.org/D151335
Support printing of symbols for MachO of `MH_FILESET` type.
This is achieved by extending `dumpSymbolNamesFromObject`
to encompass fileset handling, and including an offset in
`MachOObjectFile` class to locate embedded MachO headers.
Differential Revision: https://reviews.llvm.org/D159294
Each vslide1down operation is linear in LMUL on common hardware. (For instance, the sifive-x280 cost model models slides this way.) If we do a VL unique inserts, each with a cost linear in LMUL, the overall cost is O(VL*LMUL). Since VL is a linear function of LMUL, this means the current lowering is quadradic in both LMUL and VL. To avoid the degenerate case, fallback to the stack if the cost is more than a fixed (linear) threshold.
For context, here's the sifive-x280 llvm-mca results for the current lowering and stack based lowering for each LMUL (using e64). Assumes code was compiled for V (i.e. zvl128b).
buildvector_m1_via_stack.mca:Total Cycles: 1904
buildvector_m2_via_stack.mca:Total Cycles: 2104
buildvector_m4_via_stack.mca:Total Cycles: 2504
buildvector_m8_via_stack.mca:Total Cycles: 3304
buildvector_m1_via_vslide1down.mca:Total Cycles: 804
buildvector_m2_via_vslide1down.mca:Total Cycles: 1604
buildvector_m4_via_vslide1down.mca:Total Cycles: 6400
buildvector_m8_via_vslide1down.mca:Total Cycles: 25599
There are other schemes we could use to cap the cost. The next best is recursive decomposition of the vector into smaller LMULs. That's still quadratic, but with a better constant. However, stack based seems to cost better on all LMULs, so we can just go with the simpler scheme.
Arguably, this patch is fixing a regression introduced with my D149667 as before that change, we'd always fallback to the stack, and thus didn't have the non-linearity.
Differential Revision: https://reviews.llvm.org/D159332
Add a dedicated debug location to VPRecipeBase to remove another
unneeded use of the underlying LLVM IR instruction and also consolidate
various DL fields in sub classes.
Each recipe can have debug location and it shouldn't rely on reference
to the underlying LLVM IR instructions to retain it. See various recipes
that had separate DL fields already.
When having <N x t> d1, unused = unmerge(G_EXT <2*N x t> v1, undef, N),
it is possible to express it just as unused, d1 = unmerge v1.
It is useful for tackling regressions in arm64-vcvt_f.ll, introduced in
https://reviews.llvm.org/D144670.
When having <N x t> d1, unused = unmerge(G_EXT <2*N x t> v1, undef, N),
it is possible to express it just as unused, d1 = unmerge v1.
It is useful for tackling regressions in arm64-vcvt_f.ll, introduced in
https://reviews.llvm.org/D144670.
If there are copy instructions between uaddlv and dup for transfer from gpr to
fpr, try to remove them with duplane.
Differential Revision: https://reviews.llvm.org/D159267
In some cases where the same mask is used for multiple
extending masked loads it can be more efficient to combine
the zero- or sign-extend into the load even if it's not a
legal or custom operation. This leads to splitting up the
extending load into smaller parts, which also requires
splitting the mask. For SVE at least this improves the
performance of the SPEC benchmark x264 slightly on
neoverse-v1 (~0.3%), and at least one other benchmark
improves by around 30%. The uplift for SVE seems due to
removing the dependencies (vector unpacks) introduced
between the loads and the vector operations, since this
should increase the level of parallelism.
See tests:
CodeGen/AArch64/sve-masked-ldst-sext.ll
CodeGen/AArch64/sve-masked-ldst-zext.ll
https://reviews.llvm.org/D159191
This adds some commonly-used instruction aliases from various sources:
- GNU
- SPARCv9 manual
- JPS1 ASR names
Reviewed By: barannikov88
Differential Revision: https://reviews.llvm.org/D157236
