Those tests were using pexpect and being flaky on some of ours bots.
This patch reimplmeents the tests usinf FileCheck, and it also
extends the test coverage to a few more stop-hook options.
llvm-svn: 347109
Summary:
This commit implements basic DidAttach and DidLaunch for the windows
DynamicLoader plugin which allow us to load shared libraries from the
inferior.
Reviewers: sas, zturner
Reviewed By: zturner
Differential Revision: https://reviews.llvm.org/D54544
llvm-svn: 346994
When debugging read-only memory we cannot use software breakpoint. We
already have support for hardware breakpoints and users can specify them
with `-H`. However, there's no option to force LLDB to use hardware
breakpoints internally, for example while stepping.
This patch adds a setting target.require-hardware-breakpoint that forces
LLDB to always use hardware breakpoints. Because hardware breakpoints
are a limited resource and can fail to resolve, this patch also extends
error handling in thread plans, where breakpoints are used for stepping.
Differential revision: https://reviews.llvm.org/D54221
llvm-svn: 346920
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
qWatchpointSupportInfo packet correctly.
In GDBRemoteCommunicationClient::GetWatchpointSupportInfo,
if the response to qWatchpointSupportInfo does not
include the 'num' field, then we did not get an answer
we understood, mark this target as not supporting that
packet.
In Target.cpp, rename the very confusingly named
CheckIfWatchpointsExhausted to CheckIfWatchpointsSupported,
and check the error status returned by
Process::GetWatchpointSupportInfo. If we cannot determine
what the number of supported watchpoints are, assume that
they will work. We'll handle the failure
later when we try to create/enable the watchpoint if the
Z2 packet isn't supported.
Add a gdb_remote_client test case.
<rdar://problem/42621432>
llvm-svn: 346561
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345693
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345686
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345678
Add support in ProcessGDBRemote::GetGDBServerRegisterInfo
for recognizing a generic "arm" architecture that will be used if
nothing better is available so that we don't ignore the register
definitions if we didn't already have an architecture set.
Also in ProcessGDBRemote::DoConnectRemote don't set the target
arch unless we have a valid architecture to set it to.
Platform::ConnectProcess will try to get the current target's
architecture, or the default architecture, when creating the
target for the connection to be attempted. If lldb was started
with a target binary, we want to create this target with that
architecture in case the remote gdb stub doesn't supply a
qHostInfo arch.
Add logging to Target::MergeArchitecture.
<rdar://problem/34916465>
llvm-svn: 345106
Summary: These tests fail on Windows because of known limitations (a.k.a. bugs) with the current implementation of GetFrameAtIndex
Reviewers: asmith, vsk
Reviewed By: vsk
Subscribers: abidh, lldb-commits
Differential Revision: https://reviews.llvm.org/D53415
llvm-svn: 344788
Summary: They fail similarly to some of the other breakpoint tests on Windows, so I suspect the cause is the same. I've linked to the same bug.
Reviewers: asmith, zturner, jingham
Subscribers: abidh, lldb-commits
Differential Revision: https://reviews.llvm.org/D53331
llvm-svn: 344744
The TestTailCallFrameSBAPI.py test checks that function names in a
backtrace are equal to an expected value.
Use a relaxed substring check because function dislpay names are
platform-dependent. E.g we see "void sink(void)" on Windows, but "sink()" on
Darwin. This seems like a bug -- just work around it for now.
llvm-svn: 344634
Some tests in test/functionalities/tail_call_frames are failing on
non-Darwin platforms. Use assertEqual to improve logging on failure.
llvm-svn: 344581
Summary:
If the names are not unique, the tests overwrite each other's results and logs. This also causes failures on platforms where the files are locked for writing.
The names of the class/test pairs *have to* always be unique. The easiest way to achieve that is to name each class differently (usually the same as the file name).
Reviewers: jasonmolenda, asmith
Subscribers: clayborg, nemanjai, kbarton, lldb-commits
Differential Revision: https://reviews.llvm.org/D53297
llvm-svn: 344547
This patch teaches lldb to detect when there are missing frames in a
backtrace due to a sequence of tail calls, and to fill in the backtrace
with artificial tail call frames when this happens. This is only done
when the execution history can be determined from the call graph and
from the return PC addresses of calls on the stack. Ambiguous sequences
of tail calls (e.g anything involving tail calls and recursion) are
detected and ignored.
Depends on D49887.
Differential Revision: https://reviews.llvm.org/D50478
llvm-svn: 343900
Before inspecting the contents of a list, make sure that we've stepped
past the push_back() that inserts the element we're interested in.
llvm-svn: 343899
This is a follow-up to https://reviews.llvm.org/D46362.
When evaluating a complex expression in DWARFExpression::Evaluate,
file addresses must be resolved to load addresses before we can
perform operations such as DW_OP_deref on them.
For this the address goes through three steps
1. Read the file address as stored in the DWARF
2. Link/relocate the file address (when reading from a .dSYM, this is a no-op)
3. Convert the file address to a load address.
D46362 implemented step (3) by resolving the file address using the
Module that the original DWARF came from. In the case of a dSYM that
is correct, but when reading from .o files, we need to look up
relocated/linked addresses, so the right place to look them up is the
current frame's module. This patch fixes that by setting the
expression's Module to point to the linked debugmap object.
A word a bout the unorthodox testcase: The motivating testcase for
this fix is in Swift, but I managed to hand-modify LLVM-IR for a
trivial C program to exhibit the same problem, so we can fix this in
llvm.org.
rdar://problem/44689915
Differential Revision: https://reviews.llvm.org/D52678
llvm-svn: 343612
max number of stack frames to backtrace, make it a setting,
target.process.thread.max-backtrace-depth.
Add a test case for the setting.
<rdar://problem/28759559>
llvm-svn: 343029
On linux, we do not support automatic loading of dependent modules, so
the module list will always contain just one module (until the target is
launched).
llvm-svn: 343016
When creating a target, lldb loads all dependent files (i.e. libs in
LC_LOAD_DYLIB for Mach-O). This can be confusing, especially when two
versions of the same library end up in the shared cache. It's possible
to change this behavior, by specifying target create -d <target> these
dependents are not loaded.
This patch changes the default behavior to only load dependent files
only when the target is an executable. When creating a target for a
library, it is now no longer necessary to pass -d. The user can still
override this behavior by specifying the -d option to change this
behavior.
rdar://problem/43721382
Differential revision: https://reviews.llvm.org/D51934
llvm-svn: 342634
Add a "filecheck" method to the LLDB test base. This allows test authors
to pattern match command output using FileCheck, making it possible to
write stricter tests than what `self.expect` allows.
For context (motivation, examples of stricter checking, etc), see the
lldb-dev thread: "Using FileCheck in lldb inline tests".
Differential Revision: https://reviews.llvm.org/D50751
llvm-svn: 342508
I started from a clean slate to do the checkin, but forgot to svn add the new files.
Do that now.
Also add the one new source file to CMakeLists.txt
llvm-svn: 342190
Summary:
This patch adds a framework for adding descriptions to the command completions we provide.
It also adds descriptions for completed top-level commands so that we can test this code.
Completions are in general supposed to be displayed alongside the completion itself. The descriptions
can be used to provide additional information about the completion to the user. Examples for descriptions
are function signatures when completing function calls in the expression command or the binary name
when providing completion for a symbol.
There is still some boilerplate code from the old completion API left in LLDB (mostly because the respective
APIs are reused for non-completion related purposes, so the CompletionRequest doesn't make sense to be
used), so that's why I still had to change some function signatures. Also, as the old API only passes around a
list of matches, and the descriptions are for these functions just another list, I had to add some code that
essentially just ensures that both lists are always the same side (e.g. all the manual calls to
`descriptions->AddString(X)` below a `matches->AddString(Y)` call).
The initial command descriptions that come with this patch are just reusing the existing
short help that is already added in LLDB.
An example completion with descriptions looks like this:
```
(lldb) pl
Available completions:
platform -- Commands to manage and create platforms.
plugin -- Commands for managing LLDB plugins.
```
Reviewers: #lldb, jingham
Reviewed By: #lldb, jingham
Subscribers: jingham, JDevlieghere, lldb-commits
Differential Revision: https://reviews.llvm.org/D51175
llvm-svn: 342181
This patch improves the support of DWARF5.
Particularly the reporting of source code locations.
Differential revision: https://reviews.llvm.org/D51935
llvm-svn: 342153
Summary:
The 'memory region' command is at the moment not tested at all by our test suite.
This patch just adds a basic test that at least provides some basic testing.
Reviewers: #lldb, davide
Reviewed By: #lldb, davide
Subscribers: vsk, davide, lldb-commits
Differential Revision: https://reviews.llvm.org/D51930
llvm-svn: 342042
Summary: An address breakpoint of the form "b 0x1000" won't resolve if it's created while the process isn't running. This patch deletes Address::SectionWasDeleted, renames Address::SectionWasDeletedPrivate to SectionWasDeleted (and makes it public), and changes the section check in Breakpoint::ModulesChanged back to its original form
Reviewers: jingham, #lldb
Reviewed By: jingham
Subscribers: davide, lldb-commits
Differential Revision: https://reviews.llvm.org/D51816
llvm-svn: 341849
This patch allows LLDB to print column info in backtraces et al. if
available, which is useful when the backtrace contains a frame like
the following:
f(can_crash(0), can_crash(1));
Differential Revision: https://reviews.llvm.org/D51661
llvm-svn: 341506
This applies the same workaround as r321271 to other tests. The root
problem is that lldb finds an internal symbol with the same name in the
debug info of system libraries, and then fails to disambiguate between
the two.
llvm-svn: 341235
