This is a continuation of 68fd102, which did the same thing but only for
StopInfo. Using make_shared is both safer and more efficient:
- With make_shared, the object and the control block are allocated
together, which is more efficient.
- With make_shared, the enable_shared_from_this base class is properly
linked to the control block before the constructor finishes, so
shared_from_this() will be safe to use (though still not recommended
during construction).
Make StreamAsynchronousIO an unique_ptr instead of a shared_ptr. I tried
passing the class by value, but the llvm::raw_ostream forwarder stored
in the Stream parent class isn't movable and I don't think it's worth
changing that. Additionally, there's a few places that expect a
StreamSP, which are easily created from a StreamUP.
This patch improves the synchronization of the debugger's output and error
streams using two new abstractions: `LockableStreamFile` and
`LockedStreamFile`.
- `LockableStreamFile` is a wrapper around a `StreamFile` and a mutex. Client
cannot use the `StreamFile` without calling `Lock`, which returns a
`LockedStreamFile`.
- `LockedStreamFile` is an RAII object that locks the stream for the duration
of its existence. As long as you hold on to the returned object you are
permitted to write to the stream. The destruction of the object
automatically flush the output stream.
If your arguments or option values are of a type that naturally uses one
of our common completion mechanisms, you will get completion for free.
But if you have your own custom values or if you want to do fancy things
like have `break set -s foo.dylib -n ba<TAB>` only complete on symbols
in foo.dylib, you can use this new mechanism to achieve that.
This patch removes all of the Set.* methods from Status.
This cleanup is part of a series of patches that make it harder use the
anti-pattern of keeping a long-lives Status object around and updating
it while dropping any errors it contains on the floor.
This patch is largely NFC, the more interesting next steps this enables
is to:
1. remove Status.Clear()
2. assert that Status::operator=() never overwrites an error
3. remove Status::operator=()
Note that step (2) will bring 90% of the benefits for users, and step
(3) will dramatically clean up the error handling code in various
places. In the end my goal is to convert all APIs that are of the form
` ResultTy DoFoo(Status& error)
`
to
` llvm::Expected<ResultTy> DoFoo()
`
How to read this patch?
The interesting changes are in Status.h and Status.cpp, all other
changes are mostly
` perl -pi -e 's/\.SetErrorString/ = Status::FromErrorString/g' $(git
grep -l SetErrorString lldb/source)
`
plus the occasional manual cleanup.
This patch is a follow-up to #97263 that fix ambigous abbreviated
command resolution.
When multiple commands are resolved, instead of failing to pick a
command to
run, this patch changes to resolution logic to check if there is a
single
alias match and if so, it will run the alias instead of the other
matches.
This has as a side-effect that we don't need to make aliases for every
substring of aliases to support abbrivated alias resolution.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
Among other things, returning an empty string as the repeat command
disables auto-repeat, which can be useful for state-changing commands.
There's one remaining refinement to this setup, which is that for parsed
script commands, it should be possible to change an option value, or add
a new option value that wasn't originally specified, then ask lldb "make
this back into a command string". That would make doing fancy things
with repeat commands easier.
That capability isn't present in the lldb_private side either, however.
So that's for a next iteration.
I haven't added this to the docs on adding commands yet. I wanted to
make sure this was an acceptable approach before I spend the time to do
that.
Partly, there's just a lot of unnecessary boiler plate. It's also
possible to define combinations of arguments that make no sense (e.g.
eArgRepeatPlus followed by eArgRepeatPlain...) but these are never
checked since we just push_back directly into the argument definitions.
This commit is step 1 of this cleanup - do the obvious stuff. In it, all
the simple homogenous argument lists and the breakpoint/watchpoint
ID/Range types, are set with common functions. This is an NFC change, it
just centralizes boiler plate. There's no checking yet because you can't
get a single argument wrong.
The end goal is that all argument definition goes through functions and
m_arguments is hidden so that you can't define inconsistent argument
sets.
This is a follow-on to:
https://github.com/llvm/llvm-project/pull/82085
The completer for register names was missing from the argument table. I
somehow missed that the only register completer test was x86_64, so that
test broke.
I added the completer in to the right slot in the argument table, and
added a small completions test that just uses the alias register names.
If we end up having a platform that doesn't define register names, we'll
have to skip this test there, but it should add a sniff test for
register completion that will run most everywhere.
This reverts commit 21631494b068d9364b8dc8f18e59adee9131a0a5.
Reverted because of greendragon failure:
******************** TEST 'lldb-api :: functionalities/completion/TestCompletion.py' FAILED ********************
Script:
Most commands were adding argument completion handling by themselves,
resulting in a lot of unnecessary boilerplate. In many cases, this could
be done generically given the argument definition and the entries in the
g_argument_table.
I'm going to address this in a couple passes. In this first pass, I
added handling of commands that have only one argument list, with one
argument type, either single or repeated, and changed all the commands
that are of this sort (and don't have other bits of business in their
completers.)
I also added some missing connections between arg types and completions
to the table, and added a RemoteFilename and RemotePath to use in places
where we were using the Remote completers. Those arguments used to say
they were "files" but they were in fact remote files.
I also added a module arg type to use where we were using the module
completer. In that case, we should call the argument module.
This allows you to specify options and arguments and their definitions
and then have lldb handle the completions, help, etc. in the same way
that lldb does for its parsed commands internally.
This feature has some design considerations as well as the code, so I've
also set up an RFC, but I did this one first and will put the RFC
address in here once I've pushed it...
Note, the lldb "ParsedCommand interface" doesn't actually do all the
work that it should. For instance, saying the type of an option that has
a completer doesn't automatically hook up the completer, and ditto for
argument values. We also do almost no work to verify that the arguments
match their definition, or do auto-completion for them. This patch
allows you to make a command that's bug-for-bug compatible with built-in
ones, but I didn't want to stall it on getting the auto-command checking
to work all the way correctly.
As an overall design note, my primary goal here was to make an interface
that worked well in the script language. For that I needed, for
instance, to have a property-based way to get all the option values that
were specified. It was much more convenient to do that by making a
fairly bare-bones C interface to define the options and arguments of a
command, and set their values, and then wrap that in a Python class
(installed along with the other bits of the lldb python module) which
you can then derive from to make your new command. This approach will
also make it easier to experiment.
See the file test_commands.py in the test case for examples of how this
works.
Adding command interpreter statistics into "statistics dump" command so
that we can track the command usage frequency for telemetry purpose.
This is useful to answer questions like what is the most frequently used
lldb commands across all our users.
---------
Co-authored-by: jeffreytan81 <jeffreytan@fb.com>
This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
[lldb] Part 2 of 2 - Refactor `CommandObject::DoExecute(...)` to return
`void` instead of ~~`bool`~~
Justifications:
- The code doesn't ultimately apply the `true`/`false` return values.
- The methods already pass around a `CommandReturnObject`, typically
with a `result` parameter.
- Each command return object already contains:
- A more precise status
- The error code(s) that apply to that status
Part 1 refactors the `CommandObject::Execute(...)` method.
- See
[https://github.com/llvm/llvm-project/pull/69989](https://github.com/llvm/llvm-project/pull/69989)
rdar://117378957
This patch should allow the user to set specific auto-completion type
for their custom commands.
To do so, we had to hoist the `CompletionType` enum so the user can
access it and add a new completion type flag to the CommandScriptAdd
Command Object.
So now, the user can specify which completion type will be used with
their custom command, when they register it.
This also makes the `crashlog` custom commands use disk-file completion
type, to browse through the user file system and load the report.
Differential Revision: https://reviews.llvm.org/D152011
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
We're suggesting people use the form of the command that takes an exe_ctx - it
is both more convenient and more correct - since you should not be using
GetSelected{Target, Process, etc.} in commands.
This didn't work previously because we had to check whether the incoming
command was an alias command, but if it wasn't we still used the result
of that lookup - which was by the command's node name. That fails for
non-top-level commands. In this case, the resolution is pretty simple since
we already have the node's CommandObject, so all we needed to do was turn
it into a shared pointer, for which I added enable_shared_from_this to the
CommandObject.
Differential Revision: https://reviews.llvm.org/D137662
Refactor the command option enum values and the command argument table
to connect the two. This has two benefits:
- We guarantee that two options that use the same argument type have
the same accepted values.
- We can print the enum values and their description in the help
output. (D129707)
Differential revision: https://reviews.llvm.org/D129703
This is currently being done in an ad hoc way, and so for some
commands it isn't being checked. We have the info to make this check,
since commands are supposed to add their arguments to the m_arguments
field of the CommandObject. This change uses that info to check whether
the command received arguments in error.
A handful of commands weren't defining their argument types, I also had
to fix them. And a bunch of commands were checking for arguments by
hand, so I removed those checks in favor of the CommandObject one. That
also meant I had to change some tests that were checking for the ad hoc
error outputs.
Differential Revision: https://reviews.llvm.org/D128453
Protecting against accidental overwriting of commands is good, but
having to pass a flag to overwrite the command when developing your
commands is pretty annoying. This adds a setting to defeat the protection
so you can do this once at the start of your session and not have to
worry about it again.
Differential Revision: https://reviews.llvm.org/D122680
Applied modernize-use-equals-default clang-tidy check over LLDB.
This check is already present in the lldb/.clang-tidy config.
Differential Revision: https://reviews.llvm.org/D121844
Applied modernize-use-default-member-init clang-tidy check over LLDB.
It appears in many files we had already switched to in class member init but
never updated the constructors to reflect that. This check is already present in
the lldb/.clang-tidy config.
Differential Revision: https://reviews.llvm.org/D121481
This way if you have a long stack, you can issue "thread backtrace --count 10"
and then subsequent <Return>-s will page you through the stack.
This took a little more effort than just adding the repeat command, since
the GetRepeatCommand API was returning a "const char *". That meant the command
had to keep the repeat string alive, which is inconvenient. The original
API returned either a nullptr, or a const char *, so I changed the private API to
return an llvm::Optional<std::string>. Most of the patch is propagating that change.
Also, there was a little thinko in fetching the repeat command. We don't
fetch repeat commands for commands that aren't being added to history, which
is in general reasonable. And we don't add repeat commands to the history -
also reasonable. But we do want the repeat command to be able to generate
the NEXT repeat command. So I adjusted the logic in HandleCommand to work
that way.
Differential Revision: https://reviews.llvm.org/D119046
Allow users to create aliases for aliases to raw input commands. That probably
sounds convoluted, so here's an example:
```
command alias some-setup env SOMEVAR=SOMEVALUE
```
This an alias based on `env`, which itself is an alias for `_regex-env`.
`_regex-env` is a `command regex` command, which takes raw input.
The above `some-setup` alias fails with:
```
error: Unable to create requested alias.
```
This change allows such aliases to be created. lldb already supports aliases to
aliases for parsed commands.
Differential Revision: https://reviews.llvm.org/D117259
The point is to allow users with a related set of script based commands
to organize their commands in a hierarchy in the command set, rather than
having to have only top-level commands.
Differential Revision: https://reviews.llvm.org/D110298
Add the ability to silence command script import. The motivation for
this change is being able to add command script import -s
lldb.macosx.crashlog to your ~/.lldbinit without it printing the
following message at the beginning of every debug session.
"malloc_info", "ptr_refs", "cstr_refs", "find_variable", and
"objc_refs" commands have been installed, use the "--help" options on
these commands for detailed help.
In addition to forwarding the silent option to LoadScriptingModule, this
also changes ScriptInterpreterPythonImpl::ExecuteOneLineWithReturn and
ScriptInterpreterPythonImpl::ExecuteMultipleLines to honor the enable IO
option in ExecuteScriptOptions, which until now was ignored.
Note that IO is only enabled (or disabled) at the start of a session,
and for this particular use case, that's done when taking the Python
lock in LoadScriptingModule, which means that the changes to these two
functions are not strictly necessary, but (IMO) desirable nonetheless.
Differential revision: https://reviews.llvm.org/D105327
This is part 2, covering the commands source.
Some uses remain where it's tricky to see what the
logic is or they are not used with AppendError.
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D104448
This converts a default constructor's member initializers into C++11
default member initializers. This patch was automatically generated with
clang-tidy and the modernize-use-default-member-init check.
$ run-clang-tidy.py -header-filter='lldb' -checks='-*,modernize-use-default-member-init' -fix
This is a mass-refactoring patch and this commit will be added to
.git-blame-ignore-revs.
Differential revision: https://reviews.llvm.org/D103483
GetCommandSPExact is called exaclty once with include_aliases set to
true, so make it a default argument. Use early returns to simplify the
implementation.
This reverts commit a01b26fb51c710a3a8ef88cc83b0701461f5b9ab, because it
breaks the "finish" command in some way -- the command does not
terminate after it steps out, but continues running the target. The
exact blast radius is not clear, but it at least affects the usage of
the "finish" command in TestGuiBasicDebug.py. The error is *not*
gui-related, as the same issue can be reproduced by running the same
steps outside of the gui.
There is some kind of a race going on, as the test fails only 20% of the
time on the buildbot.
Currently, the interpreter's context is not updated until a command is executed.
This has resulted in the behavior of SB-interface functions and some commands
depends on previous user actions. The interpreter's context can stay uninitialized,
point to a currently selected target, or point to one of previously selected targets.
This patch removes any usages of CommandInterpreter::UpdateExecutionContext.
CommandInterpreter::HandleCommand* functions still may override context temporarily,
but now they always restore it before exiting. CommandInterpreter saves overriden
contexts to the stack, that makes nesting commands possible.
Added test reproduces one of the issues. Without this fix, the last assertion fails
because interpreter's execution context is empty until running "target list", so,
the value of the global property was updated instead of process's local instance.
Differential Revision: https://reviews.llvm.org/D92164
Make it possible to use a relative path in command script import to the
location of the file being sourced. This allows the user to put Python
scripts next to LLDB command files and importing them without having to
specify an absolute path.
To enable this behavior pass `-c` to `command script import`. The
argument can only be used when sourcing the command from a file.
rdar://68310384
Differential revision: https://reviews.llvm.org/D89334
Move the CommandObjectScript and CommandObjectRegexCommand under
Commands where all the other CommandObject implementations live.
Although neither implementations currently use the TableGen-generated
CommandOptions.inc, this move would have been necessary anyway if they
were to in the future.
