Redundant XXSWAPD has been observed on little-endian in D138883 test
case. Remove those associated with vector splat instructions.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D139193
This patch adds the additional step of looking through AND, OR, XOR
instructions when we check the number of leading zeros.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D149223
D38236 moves a redundant compare instruction from the loop body to the
preheader.
It has a bug: when `MBB1 == &MBB2`, there may be only one compare instruction in the
loop. The code will lift the compare instruction to the preheader, failing to
account for the change of the compare result in a tail call, leading to a miscompile.
Suppress the compare elimination to fix https://github.com/llvm/llvm-project/issues/62294
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D149030
If the value from constant-pool is a splat value of vector type, do not
need swap after load from constant-pool.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D139491
Vector store on P8 little endian will have swap instruction added before
the store in PPCISelLowring. If the vector is generated by splat, the
swap instruction can be eliminated.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D139691
The transform that converts this checks the alignment of the global
object being accessed. However, there was no check for the offset
within the global object which caused the compiler to produce a
DS relocation for an unaligned address.
There were two sections of code that had a lot of lambdas and in the patch
D40554 it was suggested that we clean them up as a follow-up NFC patch.
Reviewed By: nemanjai, #powerpc
Differential Revision: https://reviews.llvm.org/D132394
This patch fixes the following two bugs in `PPCInstrInfo::isSignOrZeroExtended` helper, which is used from sign-/zero-extension elimination in PPCMIPeephole pass.
- Registers defined by load with update (e.g. LBZU) were identified as already sign or zero-extended. But it is true only for the first def (loaded value) and not for the second def (i.e. updated pointer).
- Registers defined by ORIS/XORIS were identified as already sign-extended. But, it is not true for sign extension depending on the immediate (while it is ok for zero extension).
To handle the first case, the parameter for the helpers is changed from `MachineInstr` to a register number to distinguish first and second defs. Also, this patch moves the initialization of PPCMIPeepholePass to allow mir test case.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D40554
This reverts commit 7f230feeeac8a67b335f52bd2e900a05c6098f20.
Breaks CodeGenCUDA/link-device-bitcode.cu in check-clang,
and many LLVM tests, see comments on https://reviews.llvm.org/D121169
This patch is a follow up patch for ae27ca9a678301969c35f2e27c76f14c9d2bb396 to
the remove redundant terminator when optimizing conditional trap.
Peer reviewed by: nemanjai
This patch adds PPC back end optimization to analyze the arguments of a
conditional trap instruction to execute one of the following:
1. Delete it if never trap
2. Replace it if always trap
3. Otherwise keep it
Reviewed By: nemanjai, amyk, PowerPC
Differential revision: https://reviews.llvm.org/D111434
An assertion of the following can occur because Altivec and VSX splats use a different operand number for the immediate:
```
int64_t llvm::MachineOperand::getImm() const: Assertion `isImm() && "Wrong MachineOperand accessor"' failed.
```
This patch updates PPCMIPeephole.cpp assign the correct splat immediate.
Differential Revision: https://reviews.llvm.org/D105790
When performing peephole optimization to simplify the code, after removing
passed FPSP/XSRSP instruction we will set any uses of that FRSP/XSRSP to the
source of the FRSP/XSRSP.
We are finding the machine instruction using virtual register holding FRSP/XSRSP
results by searching all following instructions and encountering an issue
that the first use of the virtual register is a debug MI causing:
1. virtual register in the debug MI removed unexpectedly.
2. virtual register used in non-debug MI not replaced with the source of
FRSP/XSRSP. which stays in a undef status.
This patch fix the issue by only searching non-debug machine instruction using
virtual register holding FRSP/XSRSP results when the vr only has one non debug
usage.
Differential Revisien: https://reviews.llvm.org/D94711
Reviewed by: nemanjai
When using accumulators in loops, they are passed around in PHI nodes of unprimed
accumulators, causing the generation of additional prime/unprime instructions.
This patch detects these cases and changes these PHI nodes to primed accumulator
PHI nodes. We also add IR and MIR test cases for several PHI node cases.
Differential Revision: https://reviews.llvm.org/D91391
Summary: We have the patterns to fold 2 RLWINMs before RA, while some RLWINM will be generated after RA, for example rGc4690b007743. If the RLWINM generated after RA followed by another RLWINM, we expect to perform the optimization too.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D89855
Summary: This patch depends on D89846. We have the patterns to fold 2 RLWINMs in ppc-mi-peephole, while some RLWINM will be generated after RA, for example rGc4690b007743. If the RLWINM generated after RA followed by another RLWINM, we expect to perform the optimization after RA, too.
Reviewed By: shchenz, steven.zhang
Differential Revision: https://reviews.llvm.org/D89855
Summary: We have the patterns to fold 2 RLWINMs in ppc-mi-peephole, while some RLWINM will be generated after RA, for example D88274. If the RLWINM generated after RA followed by another RLWINM, we expect to perform the optimization after RA, too.
This is a NFC patch to move the folding patterns to PPCInstrInfo, and the follow-up works will be calling it in pre-emit-peephole and expand the patterns to handle more cases.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D89846
The test case in https://bugs.llvm.org/show_bug.cgi?id=47373 exposed
two bugs in the PPC back end. The first one was fixed in commit
27714075848e7f05a297317ad28ad2570d8e5a43 but the test case had to
be added without -verify-machineinstrs due to the second bug.
This commit fixes the use-after-kill that is left behind by the
PPC MI peephole optimization.
The function emitRLDICWhenLoweringJumpTables in PPCMIPeephole.cpp
was supposed to convert a pair of RLDICL and RLDICR to a single RLDIC,
but it was leaving out the RLDICL instruction. This PR fixes the bug.
Differential Revision: https://reviews.llvm.org/D78063
This patch folds redundant load immediates into a zero for instructions
which recognise this as the value zero and not the register. If the load
immediate is no longer in use it is then deleted.
This is already done in earlier passes but the ppc-mi-peephole allows for
a more general implementation.
Differential Revision: https://reviews.llvm.org/D69168
"unskipableSimplifyCode()" was added to handle unsafe BL8_NOTOC instruction
when TOC was not completely removed. The function is not needed after confirming
TOC pointer is not used in a function that uses PC-Relative addressing.
Differential Revision: https://reviews.llvm.org/D78517
On PowerPC most functions require a valid TOC pointer.
This is the case because either the function itself needs to use this
pointer to access the TOC or because other functions that are called
from that function expect a valid TOC pointer in the register R2.
The main exception to this is leaf functions that do not access the TOC
since they are guaranteed not to need a valid TOC pointer.
This patch introduces a feature that will allow more functions to not
require a valid TOC pointer in R2.
Differential Revision: https://reviews.llvm.org/D73664
MI peephole will remove unnecessary FRSP instructions. This patch
removes such unnecessary XSRSP.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D77208
We use o suffix to indicate record form instuctions,
(as it is similar to dot '.' in mne?)
This was fine before, as we did not support XO-form.
However, with https://reviews.llvm.org/D66902,
we now have XO-form support.
It becomes confusing now to still use 'o' for record form,
and it is weird to have something like 'Oo' .
This patch rename all 'o' instructions to use '_rec' instead.
Also rename `isDot` to `isRecordForm`.
Reviewed By: #powerpc, hfinkel, nemanjai, steven.zhang, lkail
Differential Revision: https://reviews.llvm.org/D70758
