Because DW_TAG_LLVM_ptrauth_type is not marked as a type, dwarfdump
currently emits a spurious error: DIE has DW_AT_type with incompatible
tag DW_TAG_LLVM_ptrauth_type. This patch fixes that and adds a test.
Some instructions are not matched by update_mir_test_checks.py because MIFlags and
regex in the script are not synchronized.
Differential Revision: https://reviews.llvm.org/D136170
Set target triple to "dxil-ms-dx" for DXIL at the end of DXILTranslateMetadata.
Reviewed By: beanz
Differential Revision: https://reviews.llvm.org/D131545
This appears to be a copy+paste typo in the znver1/2 AMD SoG tables, treating the byte shift instructions like bit shifts
Older AMD SoG referred to PSLLDQ/PSRLDQ as shuffles, and Agner/instlatx64 both report they are integer shuffles
Copy this technique from bugpoint. Before trying to blindly
delete blocks, try to fold branch conditions. This intuitively
makes more sense for a faster reduction, since you can find
dead paths in the function to prune out before trying to bisect
blocks in source order.
Seems to provide some speedup on my multi-hour reduction samples.
This does have the potential to produce testcases with unreachable
blocks. This is already a problem with the existing block
reduction pass. I'm struggling dealing with invalid reductions
in these cases, so in the future this should probably start
deleting those. However, I do sometimes try to reduce failures
in code that becomes unreachable, so I'm not totally sure
what to do here.
ce3c3cb2912425bb4367bfbe9a4c68a6d6f0a04a broke this by
speculatively making transforms before checking shouldKeep.
Originally I tried to roll back changes to the IR, but it's probably
best to not touch it before querying.
This was making decisions based on BBsToDelete, while being
used to determine BBsToDelete which doesn't really work.
Additionally, this is a lot of logic just to avoid deleting
the entry block when we can just skip it.
Make load and store non-atomic. Make the others monotonic.
We could probably try to incrementally relax the orderings; not sure
how useful that would be.
A future change will skip the reduction for functions with
unreachable blocks. Also stop using the hard to follow python based
interestingness check in favor of FileCheck.
I often run llvm-reduce on IR that contains debug info, this prevents an
extra step of `opt -passes=strip` I do every time and will result in a
lot less invalid reductions around debug metadata.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D136208
So we don't over count the number of chunks and do unnecessary work reducing more chunks than exist.
This lowers some random reduction I tested with locally from 250s to 232s.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D136127
In some modes llvm-config issues an error if a requested library is not
available on the system. The in-tree lit tests do not add explicit
dependencies on all component libraries, instead relying on the
transitive dependencies of tools and other libraries.
This can result in some configurations where a component library may not
be used by any of the test dependencies, so it may not be generated
before the tests run. This occurs when optional components of the LLVM
build are excluded, or not included.
In the case where a component library is not generated two test caess
are currently failing. One which tests the shared library boolean flag,
and one which tests the system library requirements. Neither test
require the full set of LLVM libraries to be specifed, so in both cases
I've limited the requested library set to Support to make the tests more
robust.
The current implementation outputs JSON in the following way:
[{'<filename>':{'FileSummary':{},...}}]
Using the filename as a key makes processing the JSON data awkward, and
should be avoided. This patch removes that outer key, since the
'FileSummary' data also includes a 'File' field, and so we lose no data.
Reviewed By: jhenderson, leonardchan
Differential Revision: https://reviews.llvm.org/D134843
llvm-debuginfo-analyzer is a command line tool that processes debug
info contained in a binary file and produces a debug information
format agnostic “Logical View”, which is a high-level semantic
representation of the debug info, independent of the low-level
format.
The code has been divided into the following patches:
1) Interval tree
2) Driver and documentation
3) Logical elements
4) Locations and ranges
5) Select elements
6) Warning and internal options
7) Compare elements
8) ELF Reader
9) CodeView Reader
Full details:
https://discourse.llvm.org/t/llvm-dev-rfc-llvm-dva-debug-information-visual-analyzer/62570
This patch:
Driver and documentation
- Command line options.
- Full documentation.
- String Pool table.
Reviewed By: psamolysov, probinson
Differential Revision: https://reviews.llvm.org/D125777
This updates the `--function-starts` argument to now accept 3 different
modes, `addrs` for just printing the addresses of the function starts
(previous behavior), `names` for just printing the names of the function
starts, and `both` to print them both side by side.
In general if you're debugging function starts issues it's useful to see
the symbol name alongside the address. This also mirrors Apple's
`dyldinfo -function_starts` command which prints both.
Differential Revision: https://reviews.llvm.org/D119050
This small patch adds a '--skip-branches' option to the llvm-cov export
options. This option allows branch coverage information to be skipped from the
exported LCOV directives if it's not needed. For now, this only works when
exporting LCOV (which is noted in the option description), but it can be
extended for JSON later if it makes sense.
Differential Revision: https://reviews.llvm.org/D135986
This patch has the prefered disassembly changed for SVE vector list.
For instance, instead of printing this assembly:
ld4d { z1.d, z2.d, z3.d, z4.d }, p0/z, [x0]
it will print this:
ld4d { z1.d-z4.d }, p0/z, [x0]
Differential Revision: https://reviews.llvm.org/D135952
Functions with `aarch64_sme_pstatesm_body` will emit a SMSTART at the start
of the function, and a SMSTOP at the end of the function, such that all
operations use the right value for vscale.
Because the placement of these nodes is critically important (i.e. no
vscale-dependent operations should be done before SMSTART has been issued),
we require glueing the CopyFromReg to the Entry node such that we can
insert the SMSTART as part of that glued chain.
More details about the SME attributes and design can be found
in D131562.
Reviewed By: aemerson
Differential Revision: https://reviews.llvm.org/D131582
This is to fix two issues related with loading address:
1) When multiple MMAPs occur and their loading address are different, before it only used the first MMap as base address, all perf address after it used the wrong base address.
2) For pseudo probe profile, the address is always based on preferred loading address. If the base address is not equal to the preferred loading address, the pseudo probe address query will be wrong.
Solution: Instead of converting the address to offset lazily, right now all the address after parsing are converted on the fly based on preferred loading address in the parsing time. There is no "offset" used in profile generator any more.
Reviewed By: hoy, wenlei
Differential Revision: https://reviews.llvm.org/D126827
The llvm-driver, enabled with LLVM_TOOL_LLVM_DRIVER_BUILD combines many llvm executables
into one to save overall toolchain size. This patch adds the capability for lld to be part of the
llvm-driver.
Differential Revision: https://reviews.llvm.org/D127472
The e_flags of existing object files are all 0x3 which happens to be
compatible. From this commit on, all LoongArch objects produced with
upstream LLVM will be of object file ABI v1, which is already supported
by binutils' master branch (to be released as 2.40), and is allowed by
the same binutils version to interlink with v0 objects so the existing
distributions have time to migrate.
Differential Revision: https://reviews.llvm.org/D134601
Try some dumb strength reductions to "simpler" opcodes.
Make some opcode substitutions I typically try to get smaller
MIR out of codegen. This is a bit target specific and I have a
lot of increasingly target specific modifications I try
during manual reduction.
Verify all the requested passes exist before trying to run any.
For long reductions, it was really annoying for it to get halfway through
and then I come back later to an incomplete reduction.
Also add a new skip-delta-passes flag. Most of the time I want to opt out
of specific reductions, rather than run a select few.
When zlib is disabled at build time, the diagnostic `LLVM was not compiled with
LLVM_ENABLE_ZLIB: cannot decompress` for --decompress-debug-sections may be
inaccurate: if zstd is enabled, we should still support zstd decompression.
It's not useful to test zlib and zstd. Just remove the diagnostic and add a new
one before `compression::decompress`.
This fixes compress-debug-sections-zstd.test
Reviewed By: mariusz-sikora-at-amd, jhenderson, phosek
Differential Revision: https://reviews.llvm.org/D135744
The previous calculations seem to have assumed that the section address would be zero.
This is true for relocatable object files, but certainly not for linked files like shared libraries.
Fixed the calculations to make them identical to the "real" `getInstruction` call below & added a regression test.
Reviewed By: scott.linder, simon_tatham
Differential Revision: https://reviews.llvm.org/D135430
Unfortunately, we have a broken handling of this in the runtime of rocm
5.3. The runtime is expected to handle this correctly when v5 becomes
the default.
Differential Revision: https://reviews.llvm.org/D134714
Without this patch, we hit the following a lot:
"llvm.dbg.declare intrinsic requires a !dbg attachment"
"DICompileUnit not listed in llvm.dbg.cu"
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D135492
Phis have a quirk where the same predecessor block may appear multiple times
if the same block branches to it multiple ways. All the values need to match,
but this was replacing each operand independently. If an operand can be simplified,
make sure to replace every instance of the incoming block's value.
In https://reviews.llvm.org/D135127 we created the show flag
`--output-format` which was confusing because it behaved differently
than the same flag in the merge command. So, rename the flag to
`--show-format`. This also allows us to add the `text` option to mean
"normal text output" rather than "text-encoded profiles" like it does
for the merge command.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D135467
Add `--output-format` option for the `llvm-profdata show` command to select the type of output. The existing `--text` flag is used to emit text encoded profiles. To avoid confusion, `--output-format=text-encoding` indicates that the output will be profiles encoded in the text format, and `--output-format=text` indicates the default text output that doesn't necessarily represent a profile.
`--output-format=json` is an alias for `--json` and `--output-format=yaml` will be used in D134770.
Reviewed By: phosek
Differential Revision: https://reviews.llvm.org/D135127
This new pass for llvm-reduce attempts to reduce DebugInfo metadata.
The process used is:
1. Scan every MD node, keeping track of nodes already visited.
2. Look for DebugInfo nodes, then record any operands that are lists.
3. Bisect though all the elements of the collected lists.
Differential Revision: https://reviews.llvm.org/D132077
This reverts commit 69549de865550e54983ed8d00009920184de47ff.
The change in D135237 can lead to verification failures like `scope must have two or three operands`.
The ongoing work in D132077 does something similar without these failures, so lets wait for that to land and revert this patch.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D135395
