Added codegen for scope directive, enabled allocate and firstprivate
clauses, and added scope directive LIT test.
Testing
- LIT tests (including new scope test).
- OpenMP scope example test from 5.2 OpenMP API examples document.
- Three executable scope tests from OpenMP_VV/sollve_vv suite.
As part of the LLVM effort to eliminate debug-info intrinsics, we're
moving to a world where only iterators should be used to insert
instructions. This isn't a problem in clang when instructions get
generated before any debug-info is inserted, however we're planning on
deprecating and removing the instruction-pointer insertion routines.
Scatter some calls to getIterator in a few places, remove a
deref-then-addrof on another iterator, and add an overload for the
createLoadInstBefore utility. Some callers passes a null insertion
point, which we need to handle explicitly now.
This is a minimal patch to support parsing for "omp assume" directives.
These are meant to be hints to a compiler's optimisers: as such, it is
legitimate (if not very useful) to ignore them. The patch builds on top
of the existing support for "omp assumes" directives (note spelling!).
Unlike the "omp [begin/end] assumes" directives, "omp assume" is
associated with a compound statement, i.e. it can appear within a
function. The "holds" assumption could (theoretically) be mapped onto
the existing builtin "__builtin_assume", though the latter applies to a
single point in the program, and the former to a range (i.e. the whole
of the associated compound statement).
This patch fixes sollve's OpenMP 5.1 "omp assume"-based tests.
- For languages following SPMD/SIMT programming model, functions and
call sites are marked 'convergent' by default. 'noconvergent' is added
in this patch to allow developers to remove that 'convergent'
attribute when it's safe.
Reviewers:
nhaehnle, Sirraide, yxsamliu, Artem-B, ilovepi, jayfoad, ssahasra, arsenm
Reviewed By: arsenm
Pull Request: https://github.com/llvm/llvm-project/pull/100637
Add the reverse directive which will be introduced in the upcoming
OpenMP 6.0 specification. A preview has been published in [Technical
Report 12](https://www.openmp.org/wp-content/uploads/openmp-TR12.pdf).
---------
Co-authored-by: Alexey Bataev <a.bataev@outlook.com>
There are two problems with _BitInt prior to this patch:
1. For at least some values of N, we cannot use LLVM's iN for the type
of struct elements, array elements, allocas, global variables, and so
on, because the LLVM layout for that type does not match the high-level
layout of _BitInt(N).
Example: Currently for i128:128 targets correct implementation is
possible either for __int128 or for _BitInt(129+) with lowering to iN,
but not both, since we have now correct implementation of __int128 in
place after a21abc7.
When this happens, opaque [M x i8] types used, where M =
sizeof(_BitInt(N)).
2. LLVM doesn't guarantee any particular extension behavior for integer
types that aren't a multiple of 8. For this reason, all _BitInt types
are now have in-memory representation that is a whole number of bytes.
I.e. for example _BitInt(17) now will have memory layout type i32.
This patch also introduces concept of load/store type and adds an API to
CodeGenTypes that returns the IR type that should be used for load and
store operations. This is particularly useful for the case when a
_BitInt ends up having array of bytes as memory layout type. For
_BitInt(N), let M = sizeof(_BitInt(N)), and let BITS = M * 8. Loads and
stores of iM would both (1) produce far better code from the backends
and (2) be far more optimizable by IR passes than loads and stores of [M
x i8].
Fixes https://github.com/llvm/llvm-project/issues/85139
Fixes https://github.com/llvm/llvm-project/issues/83419
---------
Co-authored-by: John McCall <rjmccall@gmail.com>
Uses the new InsertPosition class (added in #94226) to simplify some of
the IRBuilder interface, and removes the need to pass a BasicBlock
alongside a BasicBlock::iterator, using the fact that we can now get the
parent basic block from the iterator even if it points to the sentinel.
This patch removes the BasicBlock argument from each constructor or call
to setInsertPoint.
This has no functional effect, but later on as we look to remove the
`Instruction *InsertBefore` argument from instruction-creation
(discussed
[here](https://discourse.llvm.org/t/psa-instruction-constructors-changing-to-iterator-only-insertion/77845)),
this will simplify the process by allowing us to deprecate the
InsertPosition constructor directly and catch all the cases where we use
instructions rather than iterators.
This patch implements the 'loop' construct AST, as well as the basic
appertainment rule. Additionally, it sets up the 'parent' compute
construct, which is necessary for codegen/other diagnostics.
A 'loop' can apply to a for or range-for loop, otherwise it has no other
restrictions (though some of its clauses do).
This is in effect a revert of f139ae3d93797, as we have since gained a
more sophisticated way of doing extra IRGen with the addition of
RawAddress in #86923.
PR #80680 added bits in the codegen to lazily add convergence intrinsics
when required. This logic relied on the LoopStack. The issue is when
parsing the condition, the loopstack doesn't yet reflect the correct
values, as expected since we are not yet in the loop.
However, convergence tokens should sometimes already be available. The
solution which seemed the simplest is to greedily generate the tokens
when we generate SPIR-V.
Fixes#88144
---------
Signed-off-by: Nathan Gauër <brioche@google.com>
https://wg21.link/P2809R3
This is applied as a DR to C++11 (C++98 did not guarantee forward
progress and is left untouched)
As an extension (and to preserve existing behavior in C), we consider
all controlling expression that can be constant folded
in the front end, not just standard constant expressions.
To authenticate pointers, CodeGen needs access to the key and
discriminators that were used to sign the pointer. That information is
sometimes known from the context, but not always, which is why `Address`
needs to hold that information.
This patch adds methods and data members to `Address`, which will be
needed in subsequent patches to authenticate signed pointers, and uses
the newly added methods throughout CodeGen. Although this patch isn't
strictly NFC as it causes CodeGen to use different code paths in some
cases (e.g., `mergeAddressesInConditionalExpr`), it doesn't cause any
changes in functionality as it doesn't add any information needed for
authentication.
In addition to the changes mentioned above, this patch introduces class
`RawAddress`, which contains a pointer that we know is unsigned, and
adds several new functions for creating `Address` and `LValue` objects.
This reapplies d9a685a9dd589486e882b722e513ee7b8c84870c, which was
reverted because it broke ubsan bots. There seems to be a bug in
coroutine code-gen, which is causing EmitTypeCheck to use the wrong
alignment. For now, pass alignment zero to EmitTypeCheck so that it can
compute the correct alignment based on the passed type (see function
EmitCXXMemberOrOperatorMemberCallExpr).
To authenticate pointers, CodeGen needs access to the key and
discriminators that were used to sign the pointer. That information is
sometimes known from the context, but not always, which is why `Address`
needs to hold that information.
This patch adds methods and data members to `Address`, which will be
needed in subsequent patches to authenticate signed pointers, and uses
the newly added methods throughout CodeGen. Although this patch isn't
strictly NFC as it causes CodeGen to use different code paths in some
cases (e.g., `mergeAddressesInConditionalExpr`), it doesn't cause any
changes in functionality as it doesn't add any information needed for
authentication.
In addition to the changes mentioned above, this patch introduces class
`RawAddress`, which contains a pointer that we know is unsigned, and
adds several new functions for creating `Address` and `LValue` objects.
This reapplies 8bd1f9116aab879183f34707e6d21c7051d083b6. The commit
broke msan bots because LValue::IsKnownNonNull was uninitialized.
To authenticate pointers, CodeGen needs access to the key and
discriminators that were used to sign the pointer. That information is
sometimes known from the context, but not always, which is why `Address`
needs to hold that information.
This patch adds methods and data members to `Address`, which will be
needed in subsequent patches to authenticate signed pointers, and uses
the newly added methods throughout CodeGen. Although this patch isn't
strictly NFC as it causes CodeGen to use different code paths in some
cases (e.g., `mergeAddressesInConditionalExpr`), it doesn't cause any
changes in functionality as it doesn't add any information needed for
authentication.
In addition to the changes mentioned above, this patch introduces class
`RawAddress`, which contains a pointer that we know is unsigned, and
adds several new functions for creating `Address` and `LValue` objects.
The old logic expects the call to be the last thing we emitted, and
since it kicks in before we emit cleanups, and since `swiftasynccall`
functions always return void, that's likely to be true. "Likely" isn't
very reassuring when we're talking about slapping attributes on random
calls, though. And indeed, while I can't find any way to break the logic
directly in current main, our previous (ongoing?) experiments with
shortening argument temporary lifetimes definitely broke it wide open.
So while this commit is prophylactic for now, it's clearly the right
thing to do, and it can cherry-picked to other branches to fix problems.
This implements the C++23 `[[assume]]` attribute.
Assumption information is lowered to a call to `@llvm.assume`, unless the expression has side-effects, in which case it is discarded and a warning is issued to tell the user that the assumption doesn’t do anything. A failed assumption at compile time is an error (unless we are in `MSVCCompat` mode, in which case we don’t check assumptions at compile time).
Due to performance regressions in LLVM, assumptions can be disabled with the `-fno-assumptions` flag. With it, assumptions will still be parsed and checked, but no calls to `@llvm.assume` will be emitted and assumptions will not be checked at compile time.
This patch inserts 1-byte counters instead of an 8-byte counters into
llvm profiles for source-based code coverage. The origial idea was
proposed as block-cov for PGO, and this patch repurposes that idea for
coverage: https://groups.google.com/g/llvm-dev/c/r03Z6JoN7d4
The current 8-byte counters mechanism add counters to minimal regions,
and infer the counters in the remaining regions via adding or
subtracting counters. For example, it infers the counter in the if.else
region by subtracting the counters between if.entry and if.then regions
in an if statement. Whenever there is a control-flow merge, it adds the
counters from all the incoming regions. However, we are not going to be
able to infer counters by subtracting two execution counts when using
single-byte counters. Therefore, this patch conservatively inserts
additional counters for the cases where we need to add or subtract
counters.
RFC:
https://discourse.llvm.org/t/rfc-single-byte-counters-for-source-based-code-coverage/75685
'serial', 'parallel', and 'kernel' constructs are all considered
'Compute' constructs. This patch creates the AST type, plus the required
infrastructure for such a type, plus some base types that will be useful
in the future for breaking this up.
The only difference between the three is the 'kind'( plus some minor
clause legalization rules, but those can be differentiated easily
enough), so rather than representing them as separate AST nodes, it
seems
to make sense to make them the same.
Additionally, no clause AST functionality is being implemented yet, as
that fits better in a separate patch, and this is enough to get the
'naked' constructs implemented.
This is otherwise an 'NFC' patch, as it doesn't alter execution at all,
so there aren't any tests. I did this to break up the review workload
and to get feedback on the layout.
This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
Hello!
This PR fixes#63871. Clang should no longer crash and instead emits an
error message.
Below is an example of the new error message:
```
~/dev/fork-llvm-project omp_dispatch_unimpl
❯ ./install/bin/clang -fopenmp -c -emit-llvm -Xclang -disable-llvm-passes test.c
test.c:6:5: error: cannot compile this OpenMP dispatch directive yet
6 | #pragma omp dispatch
| ^~~~~~~~~~~~~~~~~~~~
1 error generated.
```
This patch adds the CodeGen changes needed for enabling HIP parallel algorithm offload on AMDGPU targets. This change relaxes restrictions on what gets emitted on the device path, when compiling in `hipstdpar` mode:
1. Unless a function is explicitly marked `__host__`, it will get emitted, whereas before only `__device__` and `__global__` functions would be emitted;
2. Unsupported builtins are ignored as opposed to being marked as an error, as the decision on their validity is deferred to the `hipstdpar` specific code selection pass;
3. We add a `hipstdpar` specific pass to the opt pipeline, independent of optimisation level:
- When compiling for the host, iff the user requested it via the `--hipstdpar-interpose-alloc` flag, we add a pass which replaces canonical allocation / deallocation functions with accelerator aware equivalents.
A test to validate that unannotated functions get correctly emitted is added as well.
Reviewed by: yaxunl, efriedma
Differential Revision: https://reviews.llvm.org/D155850
structured-block
where clause is one of the following:
private(list)
reduction([reduction-modifier ,] reduction-identifier : list)
nowait
Differential Revision: https://reviews.llvm.org/D157933
The loop directive is a descriptive construct which allows the compiler
flexibility in how it generates code for the directive's associated
loop(s). See OpenMP specification 5.2 [257:8-9].
Codegen added in this patch for the combined 'loop' directives are:
'target teams loop' -> 'target teams distribute parallel for'
'teams loop' -> 'teams distribute parallel for'
'target parallel loop' -> 'target parallel for'
'parallel loop' -> 'parallel for'
NOTE: The implementation of the 'loop' directive itself is unchanged.
Differential Revision: https://reviews.llvm.org/D145823
* Add `Address::withElementType()` as a replacement for
`CGBuilderTy::CreateElementBitCast`.
* Partial progress towards replacing `CreateElementBitCast`, as it no
longer does what its name suggests. Either replace its uses with
`Address::withElementType()`, or remove them if no longer needed.
* Remove unused parameter 'Name' of `CreateElementBitCast`
Reviewed By: barannikov88, nikic
Differential Revision: https://reviews.llvm.org/D153196
Change the return type of `getClobbers` function from `const char*`
to `std::string_view`. Update the function usages in CodeGen module.
The reasoning of these changes is to remove unsafe `const char*`
strings and prevent unnecessary allocations for constructing the
`std::string` in usages of `getClobbers()` function.
Differential Revision: https://reviews.llvm.org/D148799
Code generation support for 'parallel masked' directive.
The `EmitOMPParallelMaskedDirective` was implemented.
In addition, the appropiate device functions were added.
Fix#59939.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D143527
Initial support for asm goto w/ outputs (D69876) only supported outputs
along the "default" (aka "fallthrough") edge.
We can support outputs along all edges by repeating the same pattern of
stores along the indirect edges that we allready do for the default
edge. One complication is that these indirect edges may be critical
edges which would need to be split. Another issue is that mid-codgen of
LLVM IR, the control flow graph might not reflect the control flow of
the final function.
To avoid this "chicken and the egg" problem assume that any given
indirect edge may become a critical edge, and pro-actively split it.
This is unnecessary if the edge does not become critical, but LLVM will
optimize such cases via tail duplication.
Fixes: https://github.com/llvm/llvm-project/issues/53562
Reviewed By: void
Differential Revision: https://reviews.llvm.org/D136497
Prerequisite to further modifications in D136497.
Basically, there is a large body of code in CodeGenFunction::EmitAsmStmt
for emitting stores of outputs. We want to be able to repeat this logic,
for each destination of a callbr (rather than just the default
destination which is what the code currently does).
Also does some smaller cleanups like whitespace cleanups, and removing
pointless casts.
Reviewed By: void, jyknight
Differential Revision: https://reviews.llvm.org/D137113
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
Generally, with PGO enabled the C++20 likelyhood attributes shall be
dropped assuming the profile has a good coverage. However, currently
this is not the case for the following code:
if (always_false()) [[likely]] {
...
}
The patch fixes this and drops the attribute, if the parent context was
executed in the profile. The patch still preserves the attribute, if the
parent context was not executed, e.g. to support the cases when the
profile has insufficient coverage.
Differential Revision: https://reviews.llvm.org/D134456
Currently, clang does not emit debuginfo for the switch stmt
case value if it is an enum value. For example,
$ cat test.c
enum { AA = 1, BB = 2 };
int func1(int a) {
switch(a) {
case AA: return 10;
case BB: return 11;
default: break;
}
return 0;
}
$ llvm-dwarfdump test.o | grep AA
$
Note that gcc does emit debuginfo for the same test case.
This patch added such a support with similar implementation
to CodeGenFunction::EmitDeclRefExprDbgValue(). With this patch,
$ clang -g -c test.c
$ llvm-dwarfdump test.o | grep AA
DW_AT_name ("AA")
$
Differential Revision: https://reviews.llvm.org/D134705
GCC inline asm document says that
"... the general rule is that the output variable must be a scalar
integer, and the value is boolean."
Commit e5c37958f901cc9bec50624dbee85d40143e4bca lowers flag output of
inline asm on X86 with setcc, hence it is guaranteed that the flag
is of boolean value. Clang does not support ARM inline asm flag output
yet so nothing need to be worried about ARM.
See "Flag Output" section at
https://gcc.gnu.org/onlinedocs/gcc/Extended-Asm.html#OutputOperands
Fixes https://github.com/llvm/llvm-project/issues/56568
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D129954
