Migrate to using ReportError to report a failure to evaluate a
watchpoint condition. I had already done so for the parallel code for
breakpoints.
In the process, I noticed that I accidentally regressed the error
reporting for breakpoint conditions by dropping the call to
GetDescription. This patch rectifies that and adds a test.
Because the call to GetDescription expects a Stream*, I also switches
from using a raw_string_ostream to a StreamString for both breakpoints
and watchpoints.
This patch pipes down the `-a|--load-all` crashlog command option to the
Scripted Process initializer to load all the images used by crashed
process instead of only loading the images related to the crashed
thread.
This allows us to recreate artificial frames also for the non-crashed
scripted threads.
rdar://90396265
Differential Revision: https://reviews.llvm.org/D121826
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Expose diagnostic events through the SB API. Unlike the progress events,
I opted to use a SBStructuredData so that we can add fields in the
future.
Differential revision: https://reviews.llvm.org/D121818
`UdtRecordCompleter` shouldn't complete static members' types. static members' types are going to be completed when the types are called in `SymbolFile::CompleteType`.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D121030
Currently DW_OP_deref_size just drops the ValueType::FileAddress case and does
not attempt to handle it. This adds support for this case and a test that
verifies this support.
I did a little refactoring since DW_OP_deref and DW_OP_deref_size have some
overlap in code.
Also see: rdar://66870821
Differential Revision: https://reviews.llvm.org/D121408
This patch is another attempt to fix platform selection on Apple
Silicon. It partially undoes D117340 which tried to fix the issue by
always instantiating a remote-ios platform for "iPhone and iPad Apps on
Apple Silicon Macs".
While the previous patch worked for attaching, it broke launching and
everything else that expects the remote platform to be connected. I made
an attempt to work around that, but quickly found out that there were
just too may places that had this assumption baked in.
This patch takes a different approach and reverts back to marking the
host platform compatible with iOS triples. This brings us back to the
original situation where platform selection was broken for remote iOS
debugging on Apple Silicon. To fix that, we now look at the process'
host architecture to differentiate between iOS binaries running remotely
and iOS binaries running locally.
I tested the following scenarios, which now all uses the desired
platform:
- Launching an iOS binary on macOS: uses the host platform
- Attaching to an iOS binary on macOS: uses the host platform
- Attaching to a remote iOS binary: uses the remote-ios platform
rdar://89840215
Differential revision: https://reviews.llvm.org/D121444
They don't require that the memory return address be restored prior to
function exit, so there's no guarantee the value is correct. It's better
to return nothing that something that's not accurate.
Differential Revision: https://reviews.llvm.org/D121348
command-thread-siginfo.test employs a subject with a call to wait, and
thus requires system-linux. However, it's possible to target non-Linux
platforms despite operating on Linux hosts. So, have it require native
too.
Reviewed By: mgorny, labath
Differential Revision: https://reviews.llvm.org/D121487
This clarifies that this is an LLVM specific variable and avoids
potential conflicts with other projects.
Differential Revision: https://reviews.llvm.org/D119918
This patch ensures that lldb can automatically load a scripted process
blueprint from a dSYM bundle and launch a scripted process with it.
rdar://74502750
Differential Revision: https://reviews.llvm.org/D121316
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch makes the crashlog interactive mode show the scripted process
status with the crashed scripted thread backtrace after launching it.
rdar://89634338
Differential Revision: https://reviews.llvm.org/D121038
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Add `IsAggregateType` to the SB API.
I'd like to use this from tests, and there are numerous other `Is<X>Type`
predicates on `SBType`.
Differential Revision: https://reviews.llvm.org/D121252
This patch moves the platform creation and selection logic into the
per-debugger platform lists. I've tried to keep functional changes to a
minimum -- the main (only) observable difference in this change is that
APIs, which select a platform by name (e.g.,
Debugger::SetCurrentPlatform) will not automatically pick up a platform
associated with another debugger (or no debugger at all).
I've also added several tests for this functionality -- one of the
pleasant consequences of the debugger isolation is that it is now
possible to test the platform selection and creation logic.
This is a product of the discussion at
<https://discourse.llvm.org/t/multiple-platforms-with-the-same-name/59594>.
Differential Revision: https://reviews.llvm.org/D120810
Embedded nul characters are still printed, and they don't terminate the
string. See also D111634.
Differential Revision: https://reviews.llvm.org/D120803
Our SIGTSTP handler was working, but that was mostly accidental.
The reason it worked is because lldb is multithreaded for most of its
lifetime and the OS is reasonably fast at responding to signals. So,
what happened was that the kill(SIGTSTP) which we sent from inside the
handler was delivered to another thread while the handler was still set
to SIG_DFL (which then correctly put the entire process to sleep).
Sometimes it happened that the other thread got the second signal after
the first thread had already restored the handler, in which case the
signal handler would run again, and it would again attempt to send the
SIGTSTP signal back to itself.
Normally it didn't take many iterations for the signal to be delivered
quickly enough. However, if you were unlucky (or were playing around
with pexpect) you could get SIGTSTP while lldb was single-threaded, and
in that case, lldb would go into an endless loop because the second
SIGTSTP could only be handled on the main thread, and only after the
handler for the first signal returned (and re-installed itself). In that
situation the handler would keep re-sending the signal to itself.
This patch fixes the issue by implementing the handler the way it
supposed to be done:
- before sending the second SIGTSTP, we unblock the signal (it gets
automatically blocked upon entering the handler)
- we use raise to send the signal, which makes sure it gets delivered to
the thread which is running the handler
This also means we don't need the SIGCONT handler, as our TSTP handler
resumes right after the entire process is continued, and we can do the
required work there.
I also include a test case for the SIGTSTP flow. It uses pexpect, but it
includes a couple of extra twists. Specifically, I needed to create an
extra process on top of lldb, which will run lldb in a separate process
group and simulate the role of the shell. This is needed because SIGTSTP
is not effective on a session leader (the signal gets delivered, but it
does not cause a stop) -- normally there isn't anyone to notice the
stop.
Differential Revision: https://reviews.llvm.org/D120320
This ensures that the user is aware that many commands will not work
correctly.
We print the warning only once (per module) to avoid spamming the user
with potentially thousands of error messages.
Differential Revision: https://reviews.llvm.org/D120892
Add a --exists/-e flag to `settings set` that sets the setting if it
exists, but doesn't print an error otherwise. This is useful for example
when setting options in your ~/.lldbinit that might not exist in older
versions of lldb.
Differential revision: https://reviews.llvm.org/D121155
This patch disables TestIOHandlerProcessSTDIO.py for Arm/AArch64 Linux
to silence random test failures on buildbots. IO handler tests are known
to randomly fail on arm/aarch64 linux buildbots due to pexpect timeouts.
The old command wrote to CWD, which doesn't always work, and if it
didn't, there was no workaround (and it crashed on failure). This
patch changed the setting to provide a directory to save the objects
to.
Differential Revision: https://reviews.llvm.org/D121036
This improves this test a lot because before when using the "attachCommands" to run the following commands:
(lldb) target create -d /path/to/a.out
(lldb) process launch
This was racy as it wasn't stopping the program at the entry point, and the process might run to completion before we can even debug it. With the recent changes to the "attachCommands" we were waiting for the process to stop, but the process might be exited already, and that _should_ have caused the attach to fail since there was no process to attach to. By adding "--stop-at-entry" to the process launch, we ensure this should be less racy and give us a valid process to attach to.
I'm a big fan of the autosuggestion feature but my terminal/color scheme
doesn't display faint any differently than regular lldb output, which
makes the feature a little confusing. This patch add a setting to change
the autosuggestion ANSI escape codes.
For example, to display the autosuggestion in italic, you can add this
to your ~/.lldbinit
settings set show-autosuggestion-ansi-prefix ${ansi.italic}
setting set show-autosuggestion-ansi-suffix ${ansi.normal}
Differential revision: https://reviews.llvm.org/D121064
This disables TestScriptedProcess.test_scripted_process_and_scripted_thread
on Windows since the inferior binary a linked to a dylib that doesn't
build on Windows.
This should fix https://lab.llvm.org/buildbot/#/builders/83/builds/16100
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch introduces a new way to load modules programatically with
Scripted Processes. To do so, the scripted process blueprint holds a
list of dictionary describing the modules to load, which their path or
uuid, load address and eventually a slide offset.
LLDB will fetch that list after launching the ScriptedProcess, and
iterate over each entry to create the module that will be loaded in the
Scripted Process' target.
The patch also refactors the StackCoreScriptedProcess test to stop
inside the `libbaz` module and make sure it's loaded correctly and that
we can fetch some variables from it.
rdar://74520238
Differential Revision: https://reviews.llvm.org/D120969
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch re-enables TestEvents.py on Darwin and fixes some crashes
that were happening due to an undefined method.
I ran it 100 times locally with the following command and it passed
every the time:
```
for i in {1..100}; do print $i/100; ./bin/lldb-dotest -p TestEvents.py 2>&1 | rg PASSED; if [ "$?" -eq "1" ]; then break; fi; done
```
Let's see if it still fails non-deterministically on the bots and
eventually also re-enable it on linux.
rdar://37037235
Differential Revision: https://reviews.llvm.org/D120607
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This is a modified version of a previous patch that was reverted: https://reviews.llvm.org/D119797
This version only waits for the process to stop when using "launchCommands" or "attachCommands"...
...and doesn't play with the async mode when doing normal launch/attach.
We discovered that when using "launchCommands" or "attachCommands" that there was an issue where these commands were not being run synchronously. There were further problems in this case where we would get thread events for the process that was just launched or attached before the IDE was ready, which is after "configurationDone" was sent to lldb-vscode.
This fix introduces the ability to wait for the process to stop after "launchCommands" or "attachCommands" are run to ensure that we have a stopped process point that is ready for the debug session to proceed. We spin up the thread that listens for process events before we start the launch or attach, but we don't want stop events being delivered through the DAP protocol until the "configurationDone" packet is received. We now always ignore the stop event with a stop ID of 1, which is the first stop. All normal launch and attach scenarios use the synchronous mode, and "launchCommands and "attachCommands" run an array of LLDB commands in async mode.
This should make our launch with "launchCommands" and attach with "attachCommands" avoid a race condition when the process is being launched or attached.
Differential Revision: https://reviews.llvm.org/D120755
This reverts commit 6b3b3ef344504334f43afe76c805d2e6e7b587e9.
Jim Ingham informed me that the upper case is a hint to the option
name, like you might see in a menu to show you what the shortcut is.
The check for the prompt isn't essential for this test. The check fail
on the lldb-arm-ubuntu because of what appears to be a missing space
after the prompt. Rather than disabling the test, let's see if we can
get it to pass without it.
This patch fixes a data race in IOHandlerProcessSTDIO. The race is
happens between the main thread and the event handling thread. The main
thread is running the IOHandler (IOHandlerProcessSTDIO::Run()) when an
event comes in that makes us pop the process IO handler which involves
cancelling the IOHandler (IOHandlerProcessSTDIO::Cancel). The latter
calls SetIsDone(true) which modifies m_is_done. At the same time, we
have the main thread reading the variable through GetIsDone().
This patch avoids the race by using a mutex to synchronize the two
threads. On the event thread, in IOHandlerProcessSTDIO ::Cancel method,
we obtain the lock before changing the value of m_is_done. On the main
thread, in IOHandlerProcessSTDIO::Run(), we obtain the lock before
reading the value of m_is_done. Additionally, we delay calling SetIsDone
until after the loop exists, to avoid a potential race between the two
writes.
Write of size 1 at 0x00010b66bb68 by thread T7 (mutexes: write M2862, write M718324145051843688):
#0 lldb_private::IOHandler::SetIsDone(bool) IOHandler.h:90 (liblldb.15.0.0git.dylib:arm64+0x971d84)
#1 IOHandlerProcessSTDIO::Cancel() Process.cpp:4382 (liblldb.15.0.0git.dylib:arm64+0x5ddfec)
#2 lldb_private::Debugger::PopIOHandler(std::__1::shared_ptr<lldb_private::IOHandler> const&) Debugger.cpp:1156 (liblldb.15.0.0git.dylib:arm64+0x3cb2a8)
#3 lldb_private::Debugger::RemoveIOHandler(std::__1::shared_ptr<lldb_private::IOHandler> const&) Debugger.cpp:1063 (liblldb.15.0.0git.dylib:arm64+0x3cbd2c)
#4 lldb_private::Process::PopProcessIOHandler() Process.cpp:4487 (liblldb.15.0.0git.dylib:arm64+0x5c583c)
#5 lldb_private::Debugger::HandleProcessEvent(std::__1::shared_ptr<lldb_private::Event> const&) Debugger.cpp:1549 (liblldb.15.0.0git.dylib:arm64+0x3ceabc)
#6 lldb_private::Debugger::DefaultEventHandler() Debugger.cpp:1622 (liblldb.15.0.0git.dylib:arm64+0x3cf2c0)
#7 std::__1::__function::__func<lldb_private::Debugger::StartEventHandlerThread()::$_2, std::__1::allocator<lldb_private::Debugger::StartEventHandlerThread()::$_2>, void* ()>::operator()() function.h:352 (liblldb.15.0.0git.dylib:arm64+0x3d1bd8)
#8 lldb_private::HostNativeThreadBase::ThreadCreateTrampoline(void*) HostNativeThreadBase.cpp:62 (liblldb.15.0.0git.dylib:arm64+0x4c71ac)
#9 lldb_private::HostThreadMacOSX::ThreadCreateTrampoline(void*) HostThreadMacOSX.mm:18 (liblldb.15.0.0git.dylib:arm64+0x29ef544)
Previous read of size 1 at 0x00010b66bb68 by main thread:
#0 lldb_private::IOHandler::GetIsDone() IOHandler.h:92 (liblldb.15.0.0git.dylib:arm64+0x971db8)
#1 IOHandlerProcessSTDIO::Run() Process.cpp:4339 (liblldb.15.0.0git.dylib:arm64+0x5ddc7c)
#2 lldb_private::Debugger::RunIOHandlers() Debugger.cpp:982 (liblldb.15.0.0git.dylib:arm64+0x3cb48c)
#3 lldb_private::CommandInterpreter::RunCommandInterpreter(lldb_private::CommandInterpreterRunOptions&) CommandInterpreter.cpp:3298 (liblldb.15.0.0git.dylib:arm64+0x506478)
#4 lldb::SBDebugger::RunCommandInterpreter(bool, bool) SBDebugger.cpp:1166 (liblldb.15.0.0git.dylib:arm64+0x53604)
#5 Driver::MainLoop() Driver.cpp:634 (lldb:arm64+0x100006294)
#6 main Driver.cpp:853 (lldb:arm64+0x100007344)
Differential revision: https://reviews.llvm.org/D120762
This allows `image lookup -a ... -v` to print variables only if the given
address is covered by the valid ranges of the variables. Since variables created
in dwarf plugin always has empty scope range, print the variable if it has
empty scope.
Differential Revision: https://reviews.llvm.org/D119963
SetValueFromCString and SetData methods return false if register can't
be written but they don't set a error message. It sometimes confuses
callers of these methods because they try to get the error message in case of
failure but Status::AsCString returns nullptr.
For example, lldb-vscode crashes due to this bug if some register can't
be written. It invokes SBError::GetCString in case of error and doesn't
check whether the result is nullptr (see request_setVariable implementation in
lldb-vscode.cpp for more info).
Reviewed By: labath, clayborg
Differential Revision: https://reviews.llvm.org/D120319
See post-commit discussion on https://reviews.llvm.org/D120305.
This change breaks the clang-ppc64le-rhel buildbot, though
there is suspicion that it's an issue with the bot. The change
also had a larger than expected impact on compile-time and
code-size.
This reverts commit 3c4ed02698afec021c6bca80740d1e58e3ee019e
and some followup changes.
This patch relands commit 3e3e79a9e4c378b59f5f393f556e6a84edcd8898, and
fixes the memory sanitizer issue described in D120284, by removing the
output arguments from the LLDB_INSTRUMENT_VA invocation.
Differential Revision: https://reviews.llvm.org/D120599
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
