This patch adds --platform-available-ports option to the dotest.py
script to avoid hardcoded gdb ports in lldb testsuite.
Currently, this option could be helpful in GdbRemoteTestCases (e.g.
TestLldbGdbServer, TestNonStop, TestGdbRemoteThreadsInStopReply,
TestGdbRemotePlatformFile, TestGdbRemote_vCont)
Some lldb tests from llgs category fail on RISC-V target due to lack of
necessary condition checks. This patch adapts these tests by taking into
account the peculiarities of the RISC-V architecture
During LLDB testing on slow machines with the remote-linux platform all
tests from llgs category fail with python exception `BrokenPipeError`.
The main reason of these failures is slow start of lldb-server in
gdbserver mode. Due to this desired gdbserver socket does not have time
to open by the time the Python script tries to establish a connection.
List of failed tests:
```
TestAppleSimulatorOSType.py
TestGdbRemoteAttach.py
TestGdbRemoteAuxvSupport.py
TestGdbRemoteCompletion.py
TestGdbRemoteExitCode.py
TestGdbRemoteExpeditedRegisters.py
TestGdbRemoteHostInfo.py
TestGdbRemoteKill.py
TestGdbRemoteLaunch.py
TestGdbRemoteModuleInfo.py
TestGdbRemotePlatformFile.py
TestGdbRemoteProcessInfo.py
TestGdbRemoteRegisterState.py
TestGdbRemoteSaveCore.py
TestGdbRemoteSingleStep.py
TestGdbRemoteThreadsInStopReply.py
TestGdbRemote_qThreadStopInfo.py
TestGdbRemote_vCont.py
TestLldbGdbServer.py
TestNonStop.py
TestPtyServer.py
TestGdbRemoteAttachWait.py
TestGdbRemoteConnection.py
TestStubSetSID.py
TestGdbRemoteAbort.py
TestGdbRemoteSegFault.py
TestGdbRemoteLibrariesSvr4Support.py
TestGdbRemoteMemoryAllocation.py
TestGdbRemoteMemoryTagging.py
TestGdbRemoteGPacket.py
TestGdbRemoteTargetXmlPacket.py
TestGdbRemote_QPassSignals.py
TestGdbRemoteThreadName.py
TestPartialResume.py
TestSignal.py
```
This patch implements an additional check for the opened socket on
lldb-server side and fixes this error.
The Intel Darwin CI bots had their Xcode updated, which brought in a
debugserver with Brendan Shanks' change from September
7281e0cb3bbcce396aab8b3ea0967d7a17cd287a
https://github.com/llvm/llvm-project/pull/108663 where four general
purpose registers are sent by debugserver when in certain process
states. But most processes (nearly all in the testsuite) do not have
these registers available, so we will get register read failures when
requesting those four. These two tests would flag those as errors. There
would have been an additional problem with the g/G packet (which lldb
doesn't use w/ debugserver, but the testsuite tests) if placeholder
values were not included in the full register context bytes; I fixed
that issue with the SME patch to debugserver recently already.
Reduced MAX_ATTEMPTS to 10.
The sleep time will be 3, 3.6, 4.3, ..., 13, 15.
The total sleep time is 78 + 0.5 * MAX_CONNECT_ATTEMPTS * MAX_ATTEMPTS = 128.
Note the timeout is 600, so the rest time must be enough.
Increased the port range (12000..20000).
debugserver on arm64 devices can manage both Byte Address Select
watchpoints (1-8 bytes) and MASK watchpoints (8 bytes-2 gigabytes). This
adds a SupportedWatchpointTypes key to the QSupported response from
debugserver with a list of these, so lldb can take full advantage of
them when creating larger regions with a single hardware watchpoint.
Also add documentation for this, and two other lldb extensions, to the
lldb-gdb-remote.txt documentation.
Re-enable TestLargeWatchpoint.py on Darwin systems when testing with the
in-tree built debugserver. I can remove the "in-tree built debugserver"
in the future when this new key is handled by an Xcode debugserver.
These were useful primarily for the Python 2 to 3 transition. Python 2
is no longer supported so these are no longer necessary.
Differential Revision: https://reviews.llvm.org/D157759
This is an ongoing series of commits that are reformatting our Python
code. Reformatting is done with `black` (23.1.0).
If you end up having problems merging this commit because you have made
changes to a python file, the best way to handle that is to run `git
checkout --ours <yourfile>` and then reformat it with black.
RFC: https://discourse.llvm.org/t/rfc-document-and-standardize-python-code-style
Differential revision: https://reviews.llvm.org/D151460
Implement the support for %Stop asynchronous notification packet format
in LLGS. This does not implement full support for non-stop mode for
threaded programs -- process plugins continue stopping all threads
on every event. However, it will be used to implement asynchronous
events in multiprocess debugging.
The non-stop protocol is enabled using QNonStop packet. When it is
enabled, the server uses notification protocol instead of regular stop
replies. Since all threads are always stopped, notifications are always
generated for all active threads and copied into stop notification
queue.
If the queue was empty, the initial asynchronous %Stop notification
is sent to the client immediately. The client needs to (eventually)
acknowledge the notification by sending the vStopped packet, in which
case it is popped from the queue and the stop reason for the next thread
is reported. This continues until notification queue is empty again,
in which case an OK reply is sent.
Asychronous notifications are also used for vAttach results and program
exits. The `?` packet uses a hybrid approach -- it returns the first
stop reason synchronously, and exposes the stop reasons for remaining
threads via vStopped queue.
The change includes a test case for a program generating a segfault
on 3 threads. The server is expected to generate a stop notification
for the segfaulting thread, along with the notifications for the other
running threads (with "no stop reason"). This verifies that the stop
reasons are correctly reported for all threads, and that notification
queue works.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D125575
Instead of using sleeps, have the inferior notify us (via a trap opcode) that
the requested number of threads have been created.
This allows us to get rid of some fairly dodgy test utility code --
wait_for_thread_count seemed like it was waiting for the threads to
appear, but it never actually let the inferior run, so it only succeeded
if the threads were already started when the function was called. Since
the function was called after a fairly small delay (1s, usually), this
is probably the reason why the tests were failing on some bots.
Differential Revision: https://reviews.llvm.org/D119167
This fixes TestGdbRemoteSingleStep.py and TestGdbRemote_vCont.py. This
patch updates the test to account for the possibility that the constants
are already materialized. This appears to behave differently between
embedded arm64 devices and Apple Silicon.
Implement the qXfer:siginfo:read that is used to read the siginfo_t
(extended signal information) for the current thread. This is currently
implemented on FreeBSD and Linux.
Differential Revision: https://reviews.llvm.org/D117113
GDB and LLDB use different signal models. GDB uses a predefined set
of signal codes, and maps platform's signos to them. On the other hand,
LLDB has historically simply passed native signos.
In order to improve compatibility between LLDB and gdbserver, the GDB
signal model should be used. However, GDB does not provide a mapping
for all existing signals on Linux and unsupported signals are passed
as 'unknown'. Limiting LLDB to this behavior could be considered
a regression.
To get the best of both worlds, use the LLDB signal model when talking
to lldb-server, and the GDB signal model otherwise. For this purpose,
new versions of lldb-server indicate "native-signals+" via qSupported.
At the same time, we also detect older versions of lldb-server
via QThreadSuffixSupported for backwards compatibility. If neither test
succeeds, we assume gdbserver or another implementation using GDB model.
Differential Revision: https://reviews.llvm.org/D108078
We had two sets of build<flavour> methods, whose bodies were largely
identical. This makes any kind of modification in their vicinity
repetitive and error-prone.
Replace each set with a single method taking an optional debug_info
parameter.
Differential Revision: https://reviews.llvm.org/D111989
Add a new SaveCore() process method that can be used to request a core
dump. This is currently implemented on NetBSD via the PT_DUMPCORE
ptrace(2) request, and enabled via 'savecore' extension.
Protocol-wise, a new qSaveCore packet is introduced. It accepts zero
or more semicolon-separated key:value options, invokes the core dump
and returns a key:value response. Currently the only option supported
is "path-hint", and the return value contains the "path" actually used.
The support for the feature is exposed via qSaveCore qSupported feature.
Differential Revision: https://reviews.llvm.org/D101285
This feature "memory-tagging+" indicates that lldb-server
supports memory tagging packets. (added in a later patch)
We check HWCAP2_MTE to decide whether to enable this
feature for Linux.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D97282
Add a new feature to process save-core on Darwin systems -- for
lldb to create a user process corefile with only the dirty (modified
memory) pages included. All of the binaries that were used in the
corefile are assumed to still exist on the system for the duration
of the use of the corefile. A new --style option to process save-core
is added, so a full corefile can be requested if portability across
systems, or across time, is needed for this corefile.
debugserver can now identify the dirty pages in a memory region
when queried with qMemoryRegionInfo, and the size of vm pages is
given in qHostInfo.
Create a new "all image infos" LC_NOTE for Mach-O which allows us
to describe all of the binaries that were loaded in the process --
load address, UUID, file path, segment load addresses, and optionally
whether code from the binary was executing on any thread. The old
"read dyld_all_image_infos and then the in-memory Mach-O load
commands to get segment load addresses" no longer works when we
only have dirty memory.
rdar://69670807
Differential Revision: https://reviews.llvm.org/D88387
Introduce a NativeProcessProtocol API for indicating support for
protocol extensions and enabling them. LLGS calls
GetSupportedExtensions() method on the process factory to determine
which extensions are supported by the plugin. If the future is both
supported by the plugin and reported as supported by the client, LLGS
enables it and reports to the client as supported by the server.
The extension is enabled on the process instance by calling
SetEnabledExtensions() method. This is done after qSupported exchange
(if the debugger is attached to any process), as well as after launching
or attaching to a new inferior.
The patch adds 'fork' extension corresponding to 'fork-events+'
qSupported feature and 'vfork' extension for 'vfork-events+'. Both
features rely on 'multiprocess+' being supported as well.
Differential Revision: https://reviews.llvm.org/D100153
These two functions are doing the same thing, only one of them is
sending the packets immediately and the other "queues" them to be sent
later. The first one is better as in case of errors, the backtrace will
point straight to the place that caused them.
Modify the first method to avoid duplication, and ten standardize on it.
Add a minimal support for the multiprocess extension in lldb-server.
The server indicates support for it via qSupported, and accepts
thread-ids containing a PID. However, it still does not support
debugging more than one inferior, so any other PID value results
in an error.
Differential Revision: https://reviews.llvm.org/D98482
The tests don't work with remote debugservers. This isn't a problem with
any particular test, but the test infrastructure itself, which is why
each of these tests has a @skipIfDarwinEmbedded decorator.
This patch replaces that with a central category-based solution. It also
moves the ad-hoc windows skipping mechanism there too.
This uses the same approach as the debug info tests to avoid needing to
explicitly spell out the two kinds of tests. I convert a handful of
tests to the new mechanism. The rest will be converted in follow-up
patches.
Nearly all of our lldb-server tests have two flavours (lldb-server and
debugserver). Each of them is tagged with an appropriate decorator, and
each of them starts with a call to a matching "init" method. The init
calls are mandatory, and it's not possible to meaningfully combine them
with a different decorator.
This patch leverages the existing decorators to also tag the tests with
the appropriate debug server tag, similar to how we do with debug info
flavours. This allows us to make the "init" calls from inside the common
setUp method.
lldb-server tests are a very special subclass of "api" tests. As they
communicate with lldb-server directly, they don't actually need most of
facilities provided by our TestBase class. In particular, they don't
need the ability to fork debug info flavours of tests (but they could
use debug server flavours).
This makes them inherit from "Base" instead. This avoids the need to
explicitly mark these tests as NO_DEBUG_INFO_TEST_CASE. Two additional
necessary tweaks were:
- move run_platform_command to the base (Base) class. This is used in
one test, and can be generally useful when running tests remotely.
- add a "build" method, forwarding to buildDefault. This is to avoid
updating each test case to use buildDefault (also, "build" sounds
better). It might be interesting to refactor the (Test)Base classes so
that all debug info flavour handling happens in TestBase, and the Base
class provides a simple build method automatically.
TestLldbGdbServer.py testcases are timing out on LLDB/AArch64 Linux
buildbot since recent changes. I am temporarily increasing
DEFAULT_TIMEOUT to 20 seconds to see impact.
Now that the class does not use a thread, the name is no longer
appropriate. Rename the class to "Server" and make it a long-lived
object (instead of recreating it for every expect_gdbremote_sequence
call). The idea is to make this class a wrapper for all communication
with debug/lldb-server. This will enable some additional cleanups as we
had some duplication between socket_pump non-pump code paths.
Also squeeze in some small improvements:
- use python-level timeouts on sockets instead of the manual select
calls
- use byte arrays instead of strings when working with raw packets
This patch carries forward our aim to remove offset field from qRegisterInfo
packets and XML register description. I have created a new function which
returns if offset fields are dynamic meaning client can calculate offset on
its own based on register number sequence and register size. For now this
function only returns true for NativeRegisterContextLinux_arm64 but we can
test this for other architectures and make it standard later.
As a consequence we do not send offset field from lldb-server (arm64 for now)
while other stubs dont have an offset field so it wont effect them for now.
On the client side we have replaced previous offset calculation algorithm
with a new scheme, where we sort all primary registers in increasing
order of remote regnum and then calculate offset incrementally.
This committ also includes a test to verify all of above functionality
on Arm64.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D91241
This patch ovverides GetExpeditedRegisterSet for
NativeRegisterContextLinux_arm64 to send vector granule register in
expedited register set if SVE mode is selected.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D82855
This extends the "memory region" command to
show tagged regions on AArch64 Linux when the MTE
extension is enabled.
(lldb) memory region the_page
[0x0000fffff7ff8000-0x0000fffff7ff9000) rw-
memory tagging: enabled
This is done by adding an optional "flags" field to
the qMemoryRegion packet. The only supported flag is
"mt" but this can be extended.
This "mt" flag is read from /proc/{pid}/smaps on Linux,
other platforms will leave out the "flags" field.
Where this "mt" flag is received "memory region" will
show that it is enabled. If it is not or the target
doesn't support memory tagging, the line is not shown.
(since majority of the time tagging will not be enabled)
Testing is added for the existing /proc/{pid}/maps
parsing and the new smaps parsing.
Minidump parsing has been updated where needed,
though it only uses maps not smaps.
Target specific tests can be run with QEMU and I have
added MTE flags to the existing helper scripts.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87442
This fixes an flakyness is all gdb-remote tests. These tests have been
(mildly) flaky since we started using "localhost" instead of 127.0.0.1
in the test suite. The reason is that lldb-server needs to create two
sockets (v4 and v6) to listen for localhost connections. The algorithm
it uses first tries to select a random port (bind(localhost:0)) for the
first address, and then bind the same port for the second one.
The creating of the second socket can fail as there's no guarantee that
port will be available -- it seems that the (linux) kernel tries to
choose an unused port for the first socket (I've had to create thousands
of sockets to reproduce this reliably), but this can apparantly fail
when the system is under load (and our test suite creates a _lot_ of
sockets).
The socket creationg operation is considered successful if it creates at
least one socket is created, but the test harness has no way of knowing
which one it is, so it can end up connecting to the wrong address.
I'm not aware of a way to atomically create two sockets bound to the
same port. One way to fix this would be to make lldb-server report the
address is it listening on instead of just the port. However, this would
be a breaking change and it's not clear to me that's worth it (the
algorithm works pretty well under normal circumstances).
Instead, this patch sidesteps that problem by using "reverse"
connections. This way, the test harness is responsible for creating the
listening socket so it can pass the address that it has managed to open.
It also results in much simpler code overall.
To preserve test coverage for the named pipe method, I've moved the
relevant code to a dedicated test. To avoid original problem, this test
passes raw addresses (as obtained by getaddrinfo(localhost)) instead of
"localhost".
Differential Revision: https://reviews.llvm.org/D90313
When running in an ipv6-only environment where `AF_INET` sockets are not available, many lldb tests (mostly gdb remote tests) fail because things like `127.0.0.1` don't work there.
Use `localhost` instead of `127.0.0.1` whenever possible, or include a fallback of creating `AF_INET6` sockets when `AF_INET` fails.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D87333
Reduce sleep and time outs in GDB remote testcases to one default value
for each. Stop passing these values around and always use the default
instead.
Differential revision: https://reviews.llvm.org/D83904
Remove custom tearDownHooks from GDB Remote tests as we now cleanup
subprocesses unconditionally. This also changes the termination order to
be the reverse of the creation order. I don't think anything is relying
on that right now, but it better fits the setup/teardown paradigm.
Summary: Thanks to Hui Huang and reviewers for all the help with this patch!
Reviewers: labath, jfb, clayborg
Reviewed By: labath
Subscribers: Hui, clayborg, dexonsmith, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D61687
llvm-svn: 368776
