This corrects a Darwin build failure due to a missing stub and an
environment-specific Linux test failure due to an overly restrictive
test regex. This also backs out of the previous fix attempt; %p is
intended to be printed and parsed with the semantics of #.
When the environment LLVM_ENABLE_SYMBOLIZER_MARKUP is set, if
llvm-symbolizer fails or is disabled, this change will print a backtrace
in llvm-symbolizer markup instead of falling back to in-process
symbolization mechanisms.
This allows llvm-symbolizer to be run on the output later to produce a
high quality backtrace, even for fully-stripped LLVM utilities.
Reviewed By: mcgrathr
Differential Revision: https://reviews.llvm.org/D139750
No call sites interpreted this value meaningfully. Simplify this
interface.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D149707
To have line number information in stack traces (per stack frame) it's
necessary to implement findModulesAndOffsets.
Differential Revision: https://reviews.llvm.org/D142282
To have line number information in stack traces (per stack frame) it's
necessary to implement findModulesAndOffsets.
Differential Revision: https://reviews.llvm.org/D142282
This has been obsoleted by C++ thread_local for a long time.
As far as I know, Xcode was the last supported toolchain to add
support for C++ thread_local in 2016.
As a precaution, use LLVM_THREAD_LOCAL which provides even greater
backwards compatibility, allowing this to function even pre-C++11
versions of GCC.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D141349
This has been obsoleted by C++ thread_local for a long time.
As far as I know, Xcode was the last supported toolchain to add
support for C++ thread_local in 2016.
As a precaution, use LLVM_THREAD_LOCAL which provides even greater
backwards compatibility, allowing this to function even pre-C++11
versions of GCC.
Reviewed By: majnemer
Differential Revision: https://reviews.llvm.org/D141347
Currently the process is terminated after the timeout. Add an option
to let the process resume after the timeout instead.
https://reviews.llvm.org/D138952
This is a fairly large changeset, but it can be broken into a few
pieces:
- `llvm/Support/*TargetParser*` are all moved from the LLVM Support
component into a new LLVM Component called "TargetParser". This
potentially enables using tablegen to maintain this information, as
is shown in https://reviews.llvm.org/D137517. This cannot currently
be done, as llvm-tblgen relies on LLVM's Support component.
- This also moves two files from Support which use and depend on
information in the TargetParser:
- `llvm/Support/Host.{h,cpp}` which contains functions for inspecting
the current Host machine for info about it, primarily to support
getting the host triple, but also for `-mcpu=native` support in e.g.
Clang. This is fairly tightly intertwined with the information in
`X86TargetParser.h`, so keeping them in the same component makes
sense.
- `llvm/ADT/Triple.h` and `llvm/Support/Triple.cpp`, which contains
the target triple parser and representation. This is very intertwined
with the Arm target parser, because the arm architecture version
appears in canonical triples on arm platforms.
- I moved the relevant unittests to their own directory.
And so, we end up with a single component that has all the information
about the following, which to me seems like a unified component:
- Triples that LLVM Knows about
- Architecture names and CPUs that LLVM knows about
- CPU detection logic for LLVM
Given this, I have also moved `RISCVISAInfo.h` into this component, as
it seems to me to be part of that same set of functionality.
If you get link errors in your components after this patch, you likely
need to add TargetParser into LLVM_LINK_COMPONENTS in CMake.
Differential Revision: https://reviews.llvm.org/D137838
I found the interaction between SecondsToWait and
WaitUntilChildTerminates confusing. Rather than have a boolean to
ignore the value of SecondsToWait, combine these into one Optional
parameter.
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
This change is focussed on simplifying `Support/Host.h` to only do
target detection. In this case, this function is close in usage to
existing functions in `Support/Threading.h`, so I moved it into there.
The function is also renamed to `llvm::get_physical_cores()` to match
the style of threading's functions.
The big change here is that now if you have threading disabled,
`llvm::get_physical_cores()` will return -1, as if it had not been able
to work out the right info. This is due to how Threading.cpp includes
OS-specific code/headers. This seems ok, as if threading is disabled,
LLVM should not need to know the number of physical cores.
Differential Revision: https://reviews.llvm.org/D137836
Apply clang-format on llvm/lib/Support/Windows/ and llvm/lib/Support/Unix/ since .inc files in these folders aren't picked up by default. Eventually we need to add this extension in the monorepo .clang-format file.
Differential Revision: https://reviews.llvm.org/D138714
This reverts commit 9969ceb36b440eaafa17c486f29a69c7a7da3b3b.
On Windows:
lld-link: error: undefined symbol: int __cdecl computeHostNumPhysicalCores(void)
>>> referenced by LLVMSupport.lib(Support.Host.obj):(int __cdecl llvm::sys::getHostNumPhysicalCores(void))
This patch is spamming compiles with unhelpful and confusing messages.
E.g. the Linux kernel uses "grep -q" in several places. It's meant to
quit with a return code of zero when the first match is found. This can
cause a SIGPIPE signal, but that's expected, and there's no way to turn
this error message off to avoid spurious error messages.
UNIX03 apparently doesn't require printing an error message on SIGPIPE,
but specifically when there's an error on the stdout stream in a normal
program flow, e.g. when SIGPIPE trap is disabled.
A separate patch is planned to address the specific case we care most
about (involving llvm-nm).
This reverts commit b89bcefa6202e310eb3167dd1c37f1807377ec8d.
Link: https://github.com/llvm/llvm-project/issues/59037
Link: https://github.com/ClangBuiltLinux/linux/issues/1651
Differential Revision: https://reviews.llvm.org/D138244
OpenGroup specification doesn't require getpwuid and getpwnam
to be thread-safe. And musl libc has a not thread-safe implementation.
When building clang with musl, this can make clang-scan-deps crash.
Reviewed By: pirama
Differential Revision: https://reviews.llvm.org/D137864
LLVM contains a helpful function for getting the size of a C-style
array: `llvm::array_lengthof`. This is useful prior to C++17, but not as
helpful for C++17 or later: `std::size` already has support for C-style
arrays.
Change call sites to use `std::size` instead.
Differential Revision: https://reviews.llvm.org/D133429
Add mapped_file_region::sync(), equivalent to POSIX msync,
synchronizing written content to disk without unmapping the region.
Asserts if the mode is not mapped_file_region::readwrite.
Note that I don't have access to a Windows machine, so I can't
easily run those unit tests.
Change by dexonsmith
Differential Revision: https://reviews.llvm.org/D95494
We were dereferencing an empty Optional if IgnoreErrors was true and the
stat failed.
rdar://60887887
Differential Revision: https://reviews.llvm.org/D131791
(Reapply after revert in e9ce1a588030d8d4004f5d7e443afe46245e9a92 due to
Fuchsia test failures. Removed changes in lib/ExecutionEngine/ other
than error categories, to be checked in more detail and reapplied
separately.)
Bulk remove many of the more trivial uses of ManagedStatic in the llvm
directory, either by defining a new getter function or, in many cases,
moving the static variable directly into the only function that uses it.
Differential Revision: https://reviews.llvm.org/D129120
Bulk remove many of the more trivial uses of ManagedStatic in the llvm
directory, either by defining a new getter function or, in many cases,
moving the static variable directly into the only function that uses it.
Differential Revision: https://reviews.llvm.org/D129120
UNIX03 conformance requires utilities to flush stdout before exiting and raise
an error if writing fails. Flushing already happens on a call to exit
and thus automatically on a return from main. Write failure is then
detected by LLVM's default SIGPIPE handler. The handler already exits with
a non-zero code, but conformance additionally requires an error message.
First reapply attempt I hadn't noticed the test had changed, hopefully this
goes better.
UNIX03 conformance requires utilities to flush stdout before exiting and raise
an error if writing fails. Flushing already happens on a call to exit
and thus automatically on a return from main. Write failure is then
detected by LLVM's default SIGPIPE handler. The handler already exits with
a non-zero code, but conformance additionally requires an error message.
This patch adds an llvm-driver multicall tool that can combine multiple
LLVM-based tools. The build infrastructure is enabled for a tool by
adding the GENERATE_DRIVER option to the add_llvm_executable CMake
call, and changing the tool's main function to a canonicalized
tool_name_main format (i.e. llvm_ar_main, clang_main, etc...).
As currently implemented llvm-driver contains dsymutil, llvm-ar,
llvm-cxxfilt, llvm-objcopy, and clang (if clang is included in the
build).
llvm-driver can be enabled from builds by setting
LLVM_TOOL_LLVM_DRIVER_BUILD=On.
There are several limitations in the current implementation, which can
be addressed in subsequent patches:
(1) the multicall binary cannot currently properly handle
multi-dispatch tools. This means symlinking llvm-ranlib to llvm-driver
will not properly result in llvm-ar's main being called.
(2) the multicall binary cannot be comprised of tools containing
conflicting cl::opt options as the global cl::opt option list cannot
contain duplicates.
These limitations can be addressed in subsequent patches.
Differential revision: https://reviews.llvm.org/D109977
It can happen on macOS that terminal doesn't report the "colors"
capability in the terminfo database, in which case `tigetnum` returns -1.
This doesn't mean however that the terminal doesn't supports color, it
just means that the capability is absent from the terminal description.
In that case, we should still fallback to the checking the $TERM
environment variable to see if it supports ANSI escapes codes.
Differential Revision: https://reviews.llvm.org/D125914
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
On Apple Silicon Macs, using a Darwin thread priority of PRIO_DARWIN_BG seems to
map directly to the QoS class Background. With this priority, the thread is
confined to efficiency cores only, which makes background indexing take forever.
Introduce a new ThreadPriority "Low" that sits in the middle between Background
and Default, and maps to QoS class "Utility" on Mac. Make this new priority the
default for indexing. This makes the thread run on all cores, but still lowers
priority enough to keep the machine responsive, and not interfere with
user-initiated actions.
I didn't change the implementations for Windows and Linux; on these systems,
both ThreadPriority::Background and ThreadPriority::Low map to the same thread
priority. This could be changed as a followup (e.g. by using SCHED_BATCH for Low
on Linux).
See also https://github.com/clangd/clangd/issues/1119.
Reviewed By: sammccall, dgoldman
Differential Revision: https://reviews.llvm.org/D124715
UNIX03 conformance requires utilities to flush stdout before exiting and raise
an error if writing fails. Flushing already happens on a call to exit
and thus automatically on a return from main. Write failure is then
detected by LLVM's default SIGPIPE handler. The handler already exits with
a non-zero code, but conformance additionally requires an error message.
lib/Support/ThreadLocal.cpp has been uncompilable since rL158346 (2012-06) when
`data` became a char array. The error looks like
```
...llvm/lib/Support/Unix/ThreadLocal.inc:66:57: error: array type 'char[8]' is not assignable
void ThreadLocalImpl::setInstance(const void* d) { data = const_cast<void*>(d);}
```
