Reland #150574 with a MCStreamer::changeSection change:
In Mach-O, DWARF sections use Begin as a temporary label, requiring a label
definition, unlike section symbols in other file formats.
(Tested by dec978036ef1037753e7de5b78c978e71c49217b)
---
13a79bbfe583e1d8cc85d241b580907260065eb8 (2017) introduced fragment
creation in MCContext for createELFSectionImpl, which was inappropriate.
Fragments should only be created when using MCSteramer, not during
`MCContext::get*Section` calls.
`initMachOMCObjectFileInfo` defines multiple sections, some of which may
not be used by the code generator. This caused symbol names matching
these sections to be incorrectly marked as undefined (see
https://reviews.llvm.org/D55173).
The fragment code was later replicated in other file formats, such as
WebAssembly (see https://reviews.llvm.org/D46561), XCOFF, and GOFF.
This patch fixes the problem by moving initial fragment allocation from
MCContext::createSection to MCStreamer::changeSection.
While MCContext still creates a section symbol, the symbol is not
attached to the initial fragment. In addition,
* Move `emitLabel`/`setFragment` from `switchSection*` and
overridden changeSection to `MCObjectStreamer::changeSection` for
consistency.
* De-virtualize `switchSectionNoPrint`.
* test/CodeGen/XCore/section-name.ll now passes. XCore doesn't support
MCObjectStreamer. I don't think the MCAsmStreamer output behavior
change matters.
Pull Request: https://github.com/llvm/llvm-project/pull/150574
13a79bbfe583e1d8cc85d241b580907260065eb8 (2017) introduced fragment
creation in MCContext for createELFSectionImpl, which was inappropriate.
Fragments should only be created when using MCSteramer, not during
`MCContext::get*Section` calls.
`initMachOMCObjectFileInfo` defines multiple sections, some of which may
not be used by the code generator. This caused symbol names matching
these sections to be incorrectly marked as undefined (see
https://reviews.llvm.org/D55173).
The fragment code was later replicated in other file formats, such as
WebAssembly (see https://reviews.llvm.org/D46561), XCOFF, and GOFF.
This patch fixes the problem by moving initial fragment allocation from
MCContext::createSection to MCStreamer::changeSection.
While MCContext still creates a section symbol, the symbol is not
attached to the initial fragment.
In addition, move `emitLabel`/`setFragment` from `switchSection*` and
overridden changeSection to `MCObjectStreamer::changeSection` for
consistency.
* test/CodeGen/XCore/section-name.ll now passes. XCore doesn't support
MCObjectStreamer. I don't think the MCAsmStreamer output behavior
change matters.
Pull Request: https://github.com/llvm/llvm-project/pull/150574
This changes how LLVM constructs certain data structures that relate to
exception handling (EH) on Windows. Specifically this changes how
IP2State tables for functions are constructed. The purpose of this
change is to align LLVM to the requires of the Windows AMD64 ABI, which
requires that the IP2State table entries point to the boundaries between
instructions.
On most Windows platforms (AMD64, ARM64, ARM32, IA64, but *not* x86-32),
exception handling works by looking up instruction pointers in lookup
tables. These lookup tables are stored in `.xdata` sections in
executables. One element of the lookup tables are the `IP2State` tables
(Instruction Pointer to State).
If a function has any instructions that require cleanup during exception
unwinding, then it will have an IP2State table. Each entry in the
IP2State table describes a range of bytes in the function's instruction
stream, and associates an "EH state number" with that range of
instructions. A value of -1 means "the null state", which does not
require any code to execute. A value other than -1 is an index into the
State table.
The entries in the IP2State table contain byte offsets within the
instruction stream of the function. The Windows ABI requires that these
offsets are aligned to instruction boundaries; they are not permitted to
point to a byte that is not the first byte of an instruction.
Unfortunately, CALL instructions present a problem during unwinding.
CALL instructions push the address of the instruction after the CALL
instruction, so that execution can resume after the CALL. If the CALL is
the last instruction within an IP2State region, then the return address
(on the stack) points to the *next* IP2State region. This means that the
unwinder will use the wrong cleanup funclet during unwinding.
To fix this problem, compilers should insert a NOP after a CALL
instruction, if the CALL instruction is the last instruction within an
IP2State region. The NOP is placed within the same IP2State region as
the CALL, so that the return address points to the NOP and the unwinder
will locate the correct region.
This PR modifies LLVM so that it inserts NOP instructions after CALL
instructions, when needed. In performance tests, the NOP has no
detectable significance. The NOP is rarely inserted, since it is only
inserted when the CALL is the last instruction before an IP2State
transition or the CALL is the last instruction before the function
epilogue.
NOP padding is only necessary on Windows AMD64 targets. On ARM64 and
ARM32, instructions have a fixed size so the unwinder knows how to "back
up" by one instruction.
Interaction with Import Call Optimization (ICO):
Import Call Optimization (ICO) is a compiler + OS feature on Windows
which improves the performance and security of DLL imports. ICO relies
on using a specific CALL idiom that can be replaced by the OS DLL
loader. This removes a load and indirect CALL and replaces it with a
single direct CALL.
To achieve this, ICO also inserts NOPs after the CALL instruction. If
the end of the CALL is aligned with an EH state transition, we *also*
insert a single-byte NOP. **Both forms of NOPs must be preserved.** They
cannot be combined into a single larger NOP; nor can the second NOP be
removed.
This is necessary because, if ICO is active and the call site is
modified by the loader, the loader will end up overwriting the NOPs that
were inserted for ICO. That means that those NOPs cannot be used for the
correct termination of the exception handling region (the IP2State
transition), so we still need an additional NOP instruction. The NOPs
cannot be combined into a longer NOP (which is ordinarily desirable)
because then ICO would split one instruction, producing a malformed
instruction after the ICO call.
Introduce MCAsmInfo::UsesSetToEquateSymbol to control the preferred
syntax for symbol equating. We now favor the more readable and common
`symbol = expression` syntax over `.set`. This aligns with pre- https://reviews.llvm.org/D44256 behavior.
On Apple platforms, this resolves a clang -S vs -c behavior difference (resolves#104623).
For targets whose = support is unconfirmed, UsesSetToEquateSymbol is set to false.
This also minimizes test updates.
Pull Request: https://github.com/llvm/llvm-project/pull/142289
Reland https://github.com/llvm/llvm-project/pull/106230
The original PR was reverted due to compilation time regression.
This PR fixed that by adding a condition OutStreamer->isVerboseAsm() to
the generation of extra inlined-at debug info, so that it does not
affect normal compilation time.
Currently MC print source location of instructions in comments in
assembly when debug info is available, however, it does not include
inlined-at locations when a function is inlined.
For example, function foo is defined in header file a.h and is called
multiple times in b.cpp. If foo is inlined, current assembly will only
show its instructions with their line numbers in a.h. With inlined-at
locations, the assembly will also show where foo is called in b.cpp.
This patch adds inlined-at locations to the comments by using
DebugLoc::print. It makes the printed source location info consistent
with those printed by machine passes.
Currently MC print source location of instructions in comments in
assembly when debug info is available, however, it does not include
inlined-at locations when a function is inlined.
For example, function foo is defined in header file a.h and is called
multiple times in b.cpp. If foo is inlined, current assembly will only
show its instructions with their line numbers in a.h. With inlined-at
locations, the assembly will also show where foo is called in b.cpp.
This patch adds inlined-at locations to the comments by using
DebugLoc::print. It makes the printed source location info consistent
with those printed by machine passes.
Similar to 806761a7629df268c8aed49657aeccffa6bca449
-mtriple= specifies the full target triple while -march= merely sets the
architecture part of the default target triple (e.g. Windows, macOS),
leaving a target triple which may not make sense.
Therefore, -march= is error-prone and not recommended for tests without a target
triple. The issue has been benign as we recognize xcore-apple-darwin as ELF instead
of rejecting it outrightly.
The logic for marking runtime libcalls unavailable currently duplicates
essentially the same logic for some random subset of targets, where
someone reported an issue and then someone went and fixed the issue for
that specific target only. However, the availability for most of these
is completely target independent. In particular:
* MULO_I128 is never available in libgcc
* Various I128 libcalls are not available for 32-bit targets in libgcc
* powi is never available in MSVCRT
Unify the logic for these, so we don't miss any targets. This fixes
https://github.com/llvm/llvm-project/issues/16778 on AArch64, which is
one of the targets that was previously missed in this logic.
Some targets (e.g. PPC and Hexagon) already did this. I think it's best
to do this consistently so that frontend authors don't run into
inconsistent results when they emit `naked` functions. For example, in
Zig, we had to change our emit code to also set `frame-pointer=none` to
get reliable results across targets.
Note: I don't have commit access.
XCore does not appear to have any support for atomicrmw or cmpxchg.
This will result in all atomic operations getting expanded to __atomic_*
libcalls via AtomicExpandPass, which matches what Clang already does in
the frontend.
Additionally, remove the code which handles atomic load/store, as it
will no longer be used.
Track the live register state immediately before, instead of after,
MBBI. This makes it simple to track the state at the start or end of a
basic block without a separate (and poorly named) Tracking flag.
This changes the API of the backward(MachineBasicBlock::iterator I)
method, which now recedes to the state just before, instead of just
after, *I. Some clients are simplified by this change.
There is one small functional change shown in the lit tests where
multiple spilled registers all need to be reloaded before the same
instruction. The reloads will now be inserted in the opposite order.
This should not affect correctness.
The issue is uncovered by #47698: for IR files without a target triple,
-mtriple= specifies the full target triple while -march= merely sets the
architecture part of the default target triple, leaving a target triple which
may not make sense, e.g. riscv64-apple-darwin.
Therefore, -march= is error-prone and not recommended for tests without a target
triple. The issue has been benign as we recognize $unknown-apple-darwin as ELF instead
of rejecting it outrightly.
This is a follow-up to b71edfaa4ec3c998aadb35255ce2f60bba2940b0
since I forgot the lit.local.cfg files in that one.
Reformatting is done with `black`.
If you end up having problems merging this commit because you
have made changes to a python file, the best way to handle that
is to run git checkout --ours <yourfile> and then reformat it
with black.
If you run into any problems, post to discourse about it and
we will try to help.
RFC Thread below:
https://discourse.llvm.org/t/rfc-document-and-standardize-python-code-style
Reviewed By: barannikov88, kwk
Differential Revision: https://reviews.llvm.org/D150762
IR is now always parsed in opaque pointer mode, unless
-opaque-pointers=0 is explicitly given. There is no automatic
detection of typed pointers anymore.
The -opaque-pointers=0 option is added to any remaining IR tests
that haven't been migrated yet.
Differential Revision: https://reviews.llvm.org/D141912
This reverts commit 122efef8ee9be57055d204d52c38700fe933c033.
- Patch fixed to not reuse definitions from predecessors in EH landing pads.
- Late review suggestions (by MaskRay) have been addressed.
- M68k/pipeline.ll test updated.
- Init captures added in processBlock() to avoid capturing structured bindings.
- RISCV has this disabled for now.
Original commit message:
A new pass MachineLateInstrsCleanup is added to be run after PEI.
This is a simple pass that removes redundant and identical instructions
whenever found by scanning the MF once while keeping track of register
definitions in a map. These instructions are typically immediate loads
resulting from rematerialization, and address loads emitted by target in
eliminateFrameInde().
This is enabled by default, but a target could easily disable it by means of
'disablePass(&MachineLateInstrsCleanupID);'.
This late cleanup is naturally not "optimal" in removing instructions as it
is done by looking at phys-regs, but still quite effective. It would be
desirable to improve other parts of CodeGen and avoid these redundant
instructions in the first place, but there are no ideas for this yet.
Differential Revision: https://reviews.llvm.org/D123394
Reviewed By: RKSimon, foad, craig.topper, arsenm, asb
Init captures added in processBlock() to avoid capturing structured bindings,
which caused the build problems (with clang).
RISCV has this disabled for now until problems relating to post RA pseudo
expansions are resolved.
A new pass MachineLateInstrsCleanup is added to be run after PEI.
This is a simple pass that removes redundant and identical instructions
whenever found by scanning the MF once while keeping track of register
definitions in a map. These instructions are typically immediate loads
resulting from rematerialization, and address loads emitted by target in
eliminateFrameInde().
This is enabled by default, but a target could easily disable it by means of
'disablePass(&MachineLateInstrsCleanupID);'.
This late cleanup is naturally not "optimal" in removing instructions as it
is done by looking at phys-regs, but still quite effective. It would be
desirable to improve other parts of CodeGen and avoid these redundant
instructions in the first place, but there are no ideas for this yet.
Differential Revision: https://reviews.llvm.org/D123394
Reviewed By: RKSimon, foad, craig.topper, arsenm, asb
D132080 introduced a bug leading to `RegisterClassInfo` caches not
getting invalidated when there was exactly one more CSR register added.
Differential Revision: https://reviews.llvm.org/D132606
`RegisterClassInfo` caches information like allocation orders and reuses
it for multiple machine functions where possible. However the `MCPhysReg
*CalleeSavedRegs` field used to test whether the set of callee saved
registers changed did not work: After D28566
`MachineRegisterInfo::getCalleeSavedRegs()` can return dynamically
computed CSR sets that are only valid while the `MachineRegisterInfo`
object of the current function exists.
This changes the code to make a copy of the CSR list instead of keeping
a possibly invalid pointer around.
Differential Revision: https://reviews.llvm.org/D132080
This can be seen as a follow up to commit 0ee439b705e82a4fe20e2,
that changed the second argument of __powidf2, __powisf2 and
__powitf2 in compiler-rt from si_int to int. That was to align with
how those runtimes are defined in libgcc.
One thing that seem to have been missing in that patch was to make
sure that the rest of LLVM also handle that the argument now depends
on the size of int (not using the si_int machine mode for 32-bit).
When using __builtin_powi for a target with 16-bit int clang crashed.
And when emitting libcalls to those rtlib functions, typically when
lowering @llvm.powi), the backend would always prepare the exponent
argument as an i32 which caused miscompiles when the rtlib was
compiled with 16-bit int.
The solution used here is to use an overloaded type for the second
argument in @llvm.powi. This way clang can use the "correct" type
when lowering __builtin_powi, and then later when emitting the libcall
it is assumed that the type used in @llvm.powi matches the rtlib
function.
One thing that needed some extra attention was that when vectorizing
calls several passes did not support that several arguments could
be overloaded in the intrinsics. This patch allows overload of a
scalar operand by adding hasVectorInstrinsicOverloadedScalarOpd, with
an entry for powi.
Differential Revision: https://reviews.llvm.org/D99439
A symbol being redefined as a label is something that can happen as a result of
ordinary input, so it shouldn't cause a fatal error. Also adjust the error
message to match the one you get when a symbol is redefined as a variable.
Differential Revision: https://reviews.llvm.org/D98181
The situation with inline asm/MC error reporting is kind of messy at the
moment. The errors from MC layout are not reliably propagated and users
have to specify an inlineasm handler separately to get inlineasm
diagnose. The latter issue is not a correctness issue but could be improved.
* Kill LLVMContext inlineasm diagnose handler and migrate it to use
DiagnoseInfo/DiagnoseHandler.
* Introduce `DiagnoseInfoSrcMgr` to diagnose SourceMgr backed errors. This
covers use cases like inlineasm, MC, and any clients using SourceMgr.
* Move AsmPrinter::SrcMgrDiagInfo and its instance to MCContext. The next step
is to combine MCContext::SrcMgr and MCContext::InlineSrcMgr because in all
use cases, only one of them is used.
* If LLVMContext is available, let MCContext uses LLVMContext's diagnose
handler; if LLVMContext is not available, MCContext uses its own default
diagnose handler which just prints SMDiagnostic.
* Change a few clients(Clang, llc, lldb) to use the new way of reporting.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D97449
Errors from MCAssembler, MCObjectStreamer and *ObjectWriter typically cause a crash:
```
% cat c.c
int bar;
extern int foo __attribute__((alias("bar")));
% clang -c -fcommon c.c
fatal error: error in backend: Common symbol 'bar' cannot be used in assignment expr
PLEASE submit a bug report to ...
Stack dump:
...
```
`LLVMTargetMachine::addPassesToEmitFile` constructs `MachineModuleInfoWrapperPass`
which creates a MCContext without SourceMgr. `MCContext::reportError` calls
`report_fatal_error` which gets captured by Clang `LLVMErrorHandler` and gets translated
to the output above.
Since `MCContext::reportError` errors indicate user errors, such a crashing style error
is inappropriate. So this patch changes `report_fatal_error` to `SourceMgr().PrintMessage`.
```
% clang -c -fcommon c.c
<unknown>:0: error: Common symbol 'bar' cannot be used in assignment expr
```
Ideally we should at least recover the original filename (the line information
is generally lost). That requires general improvement to MC diagnostics,
because currently in many cases SMLoc information is lost.
clang/lib/CodeGen/CodeGenModule sets dso_local on applicable global variables,
we don't need to duplicate the work in TargetMachine:shouldAssumeDSOLocal.
(Actually the long-term goal (started by r324535) is to remove as much
additional implied dso_local in TargetMachine:shouldAssumeDSOLocal as possible.)
By not implying dso_local, we will respect dso_local/dso_preemptable specifiers
set by the frontend. This allows the proposed -fno-direct-access-external-data
option to work with -fno-pic and prevent copy relocations.
This patch should be NFC in terms of the Clang behavior because the case we
don't set dso_local is a case Clang sets dso_local. However, some tests don't
set dso_local on some `external global` and expose some differences. Most tests
have been fixed to be more robust in previous commits.
They are currently implicit because TargetMachine::shouldAssumeDSOLocal implies
dso_local.
For external data, clang -fno-pic emits the dso_local specifier for ELF and
non-MinGW COFF. Adding explicit dso_local makes these tests in align with the
clang behavior and helps implementing an option to use GOT indirection for
external data access in -fno-pic mode (to avoid copy relocations).
This reverts commit 80a34ae31125aa46dcad47162ba45b152aed968d with fixes.
Previously, since bots turning on EXPENSIVE_CHECKS are essentially turning on
MachineVerifierPass by default on X86 and the fact that
inline-asm-avx-v-constraint-32bit.ll and inline-asm-avx512vl-v-constraint-32bit.ll
are not expected to generate functioning machine code, this would go
down to `report_fatal_error` in MachineVerifierPass. Here passing
`-verify-machineinstrs=0` to make the intent explicit.
This reverts commit 80a34ae31125aa46dcad47162ba45b152aed968d with fixes.
On bots llvm-clang-x86_64-expensive-checks-ubuntu and
llvm-clang-x86_64-expensive-checks-debian only,
llc returns 0 for these two tests unexpectedly. I tweaked the RUN line a little
bit in the hope that LIT is the culprit since this change is not in the
codepath these tests are testing.
llvm\test\CodeGen\X86\inline-asm-avx-v-constraint-32bit.ll
llvm\test\CodeGen\X86\inline-asm-avx512vl-v-constraint-32bit.ll
This reverts commit rGcd5b308b828e, rGcd5b308b828e, rG8cedf0e2994c.
There are issues to be investigated for polly bots and bots turning on
EXPENSIVE_CHECKS.
