This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
b1e3cd1d79443603dc003441e07cdd8d30bb7f26 dropped the leading slash here,
presumably unintentionally.
(I don't understand Driver well enough to know how/where this is
supposed
to be tested, but it broke clangd on any project that uses the
system-installed -stdlib=libc++ on a standard debian install)
Basically NFC: A TEST/TEST_F/etc that bails out early (usually because
setup failed or some other runtime condition wasn't met) generally
should use GTEST_SKIP() to report its status correctly, unless it
takes steps to report another status (e.g., FAIL()).
Users may partition parameters specified by configuration file and put
different groups into separate files. These files are inserted into the
main file using constructs `@file`. Relative file names in it are
resolved relative to the including configuration file and this is not
convenient in some cases. A configuration file, which resides in system
directory, may need to include a file with user-defined parameters and
still provide default definitions if such file is absent.
To solve such problems, the option `--config=` is allowed inside
configuration files. Like `@file` it results in insertion of
command-line arguments but the algorithm of file search is different and
allows overriding system definitions with user ones.
Differential Revision: https://reviews.llvm.org/D136354
As now errors in file operation are handled, check for file existence
must be done prior to check for recursion, otherwise reported errors are
misleading.
Differential Revision: https://reviews.llvm.org/D136090
Previously an error raised during an expansion of response files (including
configuration files) was ignored and only the fact of its presence was
reported to the user with generic error messages. This made it difficult to
analyze problems. For example, if a configuration file tried to read an
inexistent file, the error message said that 'configuration file cannot
be found', which is wrong and misleading.
This change enhances handling errors in the expansion so that users
could get more informative error messages.
Differential Revision: https://reviews.llvm.org/D136090
Previously an error raised during an expansion of response files (including
configuration files) was ignored and only the fact of its presence was
reported to the user with generic error messages. This made it difficult to
analyze problems. For example, if a configuration file tried to read an
inexistent file, the error message said that 'configuration file cannot
be found', which is wrong and misleading.
This change enhances handling errors in the expansion so that users
could get more informative error messages.
Differential Revision: https://reviews.llvm.org/D136090
Clang has support of virtual file system for the purpose of testing, but
treatment of config files did not use it. This change enables VFS in it
as well.
Differential Revision: https://reviews.llvm.org/D132867
Clang has support of virtual file system for the purpose of testing, but
treatment of config files did not use it. This change enables VFS in it
as well.
Differential Revision: https://reviews.llvm.org/D132867
The DXC driver tests don't really belong mixed in with the toolchain
tests. This pulls them out to their own file and moves the
SimpleDiagnosticConsumer into a header so it can be used by both DXC and
toolchain tests.
fast-forwarded.
Unfortunatly fixing leak expose use-after-free if delete more then one
Compilation for the same Driver, so I am changing validateTargetProfile
to create own Driver each time.
The test was added by D122865.
The driver stripts the first argument. Without the compiler name, the
test depends on whether GCC_INSTALL_PREFIX is set or not.
See https://reviews.llvm.org/D125862
Instead of adding all devtoolset and gcc-toolset prefixes to the list of
prefixes, just scan the /opt/rh/ directory for the one with the highest
version number and only add that one.
Differential Revision: https://reviews.llvm.org/D125862
This is to avoid err_target_unknown_abi which is caused by use default TargetTriple instead of shader model target triple.
Reviewed By: beanz
Differential Revision: https://reviews.llvm.org/D125585
The DXIL validator version option(/validator-version) decide the validator version when compile hlsl.
The format is major.minor like 1.0.
In normal case, the value of validator version should be got from DXIL validator. Before we got DXIL validator ready for llvm/main, DXIL validator version option is added first to set validator version.
It will affect code generation for DXIL, so it is treated as a code gen option.
A new member std::string DxilValidatorVersion is added to clang::CodeGenOptions.
Then CGHLSLRuntime is added to clang::CodeGenModule.
It is used to translate clang::CodeGenOptions::DxilValidatorVersion into a ModuleFlag under key "dx.valver" at end of clang code generation.
Reviewed By: beanz
Differential Revision: https://reviews.llvm.org/D123884
The target profile option(/T) decide the shader model when compile hlsl.
The format is shaderKind_major_minor like ps_6_1.
The shader model is saved as llvm::Triple is clang/llvm like
dxil-unknown-shadermodel6.1-hull.
The main job to support the option is translating ps_6_1 into
shadermodel6.1-pixel.
That is done inside tryParseProfile at HLSL.cpp.
To integrate the option into clang Driver, a new DriverMode DxcMode is
created. When DxcMode is enabled, OSType for TargetTriple will be
forced into Triple::ShaderModel. And new ToolChain HLSLToolChain will
be created when OSType is Triple::ShaderModel.
In HLSLToolChain, ComputeEffectiveClangTriple is overridden to call
tryParseProfile when targetProfile option is set.
To make test work, Fo option is added and .hlsl is added for active
-xhlsl.
Reviewed By: beanz
Differential Revision: https://reviews.llvm.org/D122865
Patch by: Xiang Li <python3kgae@outlook.com>
Use the new sys::path::is_style_posix() and is_style_windows() in a few
places that need to detect the system's native path style.
In llvm/lib/Support/Path.cpp, this patch removes most uses of the
private `real_style()`, where is_style_posix() and is_style_windows()
are just a little tidier.
Elsewhere, this removes `_WIN32` macro checks. Added a FIXME to a
FileManagerTest that seemed fishy, but maintained the existing
behaviour.
Differential Revision: https://reviews.llvm.org/D112289
This moves the registry higher in the LLVM library dependency stack.
Every client of the target registry needs to link against MC anyway to
actually use the target, so we might as well move this out of Support.
This allows us to ensure that Support doesn't have includes from MC/*.
Differential Revision: https://reviews.llvm.org/D111454
This was an accidental behaviour change in D106789 and this patch
restores it back to original state.
Differential Revision: https://reviews.llvm.org/D109361
This patch exposes `InputInfo` in `Job` instead of plain filenames. This is useful in a follow-up patch that uses this to recognize `-cc1` commands interesting for Clang tooling.
Depends on D106787.
Reviewed By: dexonsmith
Differential Revision: https://reviews.llvm.org/D106788
so that when --sysroot is specified, the detected GCC installation will not be
overridden by another from /usr which happens to have a larger version.
This behavior is particularly inconvenient when the system has a larger version
GCC while the user wants to try out an older sysroot.
Delete some tests from linux-ld.c which overlap with cross-linux.c
Summary:
Object of type `Compilation` now can keep a callback that is called
after each execution of `Command`. This must simplify adaptation of
clang in custom distributions and allow facilities like collection of
execution statistics.
Reviewers: rsmith, rjmccall, Eugene.Zelenko
Subscribers: cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D78899
Object of class `Command` contains various properties of a command to
execute, but output file was missed from them. This change adds this
property. It is required for reporting consumed time and memory implemented
in D78903 and may be used in other cases too.
Differential Revision: https://reviews.llvm.org/D78902
Summary:
This is the first patch implementing the new Flang driver as outlined in [1],
[2] & [3]. It creates Flang driver (`flang-new`) and Flang frontend driver
(`flang-new -fc1`). These will be renamed as `flang` and `flang -fc1` once the
current Flang throwaway driver, `flang`, can be replaced with `flang-new`.
Currently only 2 options are supported: `-help` and `--version`.
`flang-new` is implemented in terms of libclangDriver, defaulting the driver
mode to `FlangMode` (added to libclangDriver in [4]). This ensures that the
driver runs in Flang mode regardless of the name of the binary inferred from
argv[0].
The design of the new Flang compiler and frontend drivers is inspired by it
counterparts in Clang [3]. Currently, the new Flang compiler and frontend
drivers re-use Clang libraries: clangBasic, clangDriver and clangFrontend.
To identify Flang options, this patch adds FlangOption/FC1Option enums.
Driver::printHelp is updated so that `flang-new` prints only Flang options.
The new Flang driver is disabled by default. To enable it, set
`-DBUILD_FLANG_NEW_DRIVER=ON` when configuring CMake and add clang to
`LLVM_ENABLE_PROJECTS` (e.g. -DLLVM_ENABLE_PROJECTS=“clang;flang;mlir”).
[1] “RFC: new Flang driver - next steps”
http://lists.llvm.org/pipermail/flang-dev/2020-July/000470.html
[2] “RFC: Adding a fortran mode to the clang driver for flang”
http://lists.llvm.org/pipermail/cfe-dev/2019-June/062669.html
[3] “RFC: refactoring libclangDriver/libclangFrontend to share with Flang”
http://lists.llvm.org/pipermail/cfe-dev/2020-July/066393.html
[4] https://reviews.llvm.org/rG6bf55804924d5a1d902925ad080b1a2b57c5c75c
co-authored-by: Andrzej Warzynski <andrzej.warzynski@arm.com>
Reviewed By: richard.barton.arm, sameeranjoshi
Differential Revision: https://reviews.llvm.org/D86089
When testing clang that has been compiled with `-DDEFAULT_SYSROOT` set to some path,
some tests would fail. Override sysroot to be empty string for the tests to succeed
when clang is configured with `DEFAULT_SYSROOT`.
Differential Revision: https://reviews.llvm.org/D66834
Patch by Sergej Jaskiewicz <jaskiewiczs@icloud.com>.
llvm-svn: 373147
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This patch moves the virtual file system form clang to llvm so it can be
used by more projects.
Concretely the patch:
- Moves VirtualFileSystem.{h|cpp} from clang/Basic to llvm/Support.
- Moves the corresponding unit test from clang to llvm.
- Moves the vfs namespace from clang::vfs to llvm::vfs.
- Formats the lines affected by this change, mostly this is the result of
the added llvm namespace.
RFC on the mailing list:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/126657.html
Differential revision: https://reviews.llvm.org/D52783
llvm-svn: 344140
Summary:
InMemoryFileSystem::status behaves differently than
RealFileSystem::status. The Name contained in the Status returned by
RealFileSystem::status will be the path as requested by the caller,
whereas InMemoryFileSystem::status returns the normalized path.
For example, when requested the status for "../src/first.h",
RealFileSystem returns a Status with "../src/first.h" as the Name.
InMemoryFileSystem returns "/absolute/path/to/src/first.h".
The reason for this change is that I want to make a unit test in the
clangd testsuite (where we use an InMemoryFileSystem) to reproduce a
bug I get with the clangd program (where a RealFileSystem is used).
This difference in behavior "hides" the bug in the unit test version.
An indirect impact of this change is that a -Wnonportable-include-path
warning is now emitted in test PCH/case-insensitive-include.c. This is
because the real path of the included file (with the wrong case) was not
available previously, whereas it is now.
Reviewers: malaperle, ilya-biryukov, bkramer
Reviewed By: ilya-biryukov
Subscribers: eric_niebler, malaperle, omtcyfz, hokein, bkramer, ilya-biryukov, ioeric, cfe-commits
Differential Revision: https://reviews.llvm.org/D48903
llvm-svn: 339063
Summary:
InMemoryFileSystem::status behaves differently than
RealFileSystem::status. The Name contained in the Status returned by
RealFileSystem::status will be the path as requested by the caller,
whereas InMemoryFileSystem::status returns the normalized path.
For example, when requested the status for "../src/first.h",
RealFileSystem returns a Status with "../src/first.h" as the Name.
InMemoryFileSystem returns "/absolute/path/to/src/first.h".
The reason for this change is that I want to make a unit test in the
clangd testsuite (where we use an InMemoryFileSystem) to reproduce a
bug I get with the clangd program (where a RealFileSystem is used).
This difference in behavior "hides" the bug in the unit test version.
Reviewers: malaperle, ilya-biryukov, bkramer
Subscribers: cfe-commits, ioeric, ilya-biryukov, bkramer, hokein, omtcyfz
Differential Revision: https://reviews.llvm.org/D48903
llvm-svn: 338057
This reverts commit r336807. This breaks users of
ClangTool::mapVirtualFile. Will try to investigate a fix. See also the
discussion on https://reviews.llvm.org/D48903
llvm-svn: 336831
Summary:
InMemoryFileSystem::status behaves differently than
RealFileSystem::status. The Name contained in the Status returned by
RealFileSystem::status will be the path as requested by the caller,
whereas InMemoryFileSystem::status returns the normalized path.
For example, when requested the status for "../src/first.h",
RealFileSystem returns a Status with "../src/first.h" as the Name.
InMemoryFileSystem returns "/absolute/path/to/src/first.h".
The reason for this change is that I want to make a unit test in the
clangd testsuite (where we use an InMemoryFileSystem) to reproduce a
bug I get with the clangd program (where a RealFileSystem is used).
This difference in behavior "hides" the bug in the unit test version.
In general, I guess it's good if InMemoryFileSystem works as much as
possible like RealFileSystem.
Doing so made the FileEntry::RealPathName value (assigned in
FileManager::getFile) wrong when using the InMemoryFileSystem. That's
because it assumes that vfs::File::getName will always return the real
path. I changed to to use FileSystem::getRealPath instead.
Subscribers: ilya-biryukov, ioeric, cfe-commits
Differential Revision: https://reviews.llvm.org/D48903
llvm-svn: 336807
LLVM_ON_WIN32 is set exactly with MSVC and MinGW (but not Cygwin) in
HandleLLVMOptions.cmake, which is where _WIN32 defined too. Just use the
default macro instead of a reinvented one.
See thread "Replacing LLVM_ON_WIN32 with just _WIN32" on llvm-dev and cfe-dev.
No intended behavior change.
llvm-svn: 331069
Information about clang executable name components, such as target and
driver mode, was passes in std::pair. With this change it is passed in
a special structure. It improves readability and makes access to this
information more convenient.
NFC.
Differential Revision: https://reviews.llvm.org/D36057
llvm-svn: 311981
