COMPILER_RT_DEFAULT_TARGET_ONLY is the goto workaround for building
only one of a multilib setup while still being able to autodetect the native target.
For example only building 64 bit libraries on Intel instead of 32 and 64 bit.
Which may fail without 32 bit compatibility libs installed.
As reported in https://discourse.llvm.org/t/configuring-compiler-rt-to-use-default-target-only-does-not-work/62727
this build config hasn't worked in a while.
It relies on a variable usually set during cross compliation,
though my testing shows you can set it in other scenarios too.
https://cmake.org/cmake/help/latest/variable/CMAKE_LANG_COMPILER_TARGET.html
So the options you need to provide are:
-DCOMPILER_RT_DEFAULT_TARGET_ONLY=ON -DCMAKE_C_COMPILER_TARGET="aarch64-unknown-linux-gnu"
And we should error if CMAKE_C_COMPILER_TARGET isn't set.
Reviewed By: glaubitz
Differential Revision: https://reviews.llvm.org/D147598
-Werror is redundant because CMake not only checks the
exit status, but also parses the output of try_compile.
-Wformat-security is a special case, because specifying it
without -Wformat causes gcc to emit a warning in a format
not recognized by CMake, which makes the check pass.
The orginal single folder layout produced libraries in the form:
lib/linux/<libname>-<archname>.a
That archname for Arm depended on whether you had hard or soft float.
This is sometimes shown as "arm" (soft) vs. "armhf" (hard).
If this is set in a triple we do it in the final portion, the ABI.
"gnueabi" for soft float, "gnueabihf" for hard float.
Meaning that the expected triple is:
arm-unknown-linux-gnueabihf
Not this:
armhf-unknown-linux-gnueabihf
For the per target layout I have decided to rely on the ABI portion
of the triple instead of the arch name used for the old layout
(doing that would produce the invalid triple above).
This means that building with triple:
armv8l-unknown-linux-gnueabihf
Will result in libraries in:
lib/arm-unknown-linux-gnueabihf/
And clang will now know to look for "arm" instead of "armv8l".
Meaning that we can share libraries between an armv8 and armv7 build
as we did with the previous layout. In addition to handling spelling
differences e.g. "armv8l" with an "l" on some Linux distros.
compiler-rt will autodetect that the "armhf" and/or "arm" architecture
can be built. We then replace the given triple's architecture with that.
Then if the triple's float ABI doesn't match, we change that. That new
triple is then used as the folder name.
If you select to build only the given triple, with COMPILER_RT_DEFAULT_TARGET_ONLY,
compiler-rt will not autodetect the architecture and for that I assume you
know what you're doing. In that case the library path will use the unomdified triple.
From what I can tell, this is how most large builds e.g Android and
Arm's Embedded Toolchain for llvm do things. I assume that big endian "armeb"
builds would end up doing this too.
Bare metal builds will not be using per target runtime dirs so they
remain as they were.
Depends on D139536
Reviewed By: MaskRay, phosek
Differential Revision: https://reviews.llvm.org/D140011
Replace the use of the deprecated `llvm-config` tool with LLVM's CMake
files for detecting LLVM in standalone builds.
Differential Revision: https://reviews.llvm.org/D137024
Initial builtins for LoongArch.
Add loongarch64 to ALL_CRT_SUPPORTED_ARCH list.
Support fe_getround and fe_raise_inexact in builtins.
Differential Revision: https://reviews.llvm.org/D136338
Replace the use of the deprecated `llvm-config` tool with LLVM's CMake
files for detecting LLVM in standalone builds.
Differential Revision: https://reviews.llvm.org/D137024
The current version pass -mips64r2 or -mips32r2 options,
which make it failed to build on r6 platform.
In this patch: we detect whether we are MIPSr6 by
_MIPS_ARCH_MIPS32R6/_MIPS_ARCH_MIPS64R6
The out and install path is set to the default triple instead of
hardcoded one, since the clang ask for it.
Differential Revision: https://reviews.llvm.org/D135735
Enable -Wsizeof-array-div and -Wsizeof-pointer-divcompiler.
Also, replace -Wmemset-transposed-args with -Wsuspicious-memaccess. The
latter automatically enables the former and a few other warnings.
Differential Revision: https://reviews.llvm.org/D133783
As described in Issue #54196
<https://github.com/llvm/llvm-project/issues/54196>, the ideas of `clang`
and `compiler-rt` where runtime libs are located with
`-DLLVM_ENABLE_RUNTIMES` can differ. This is the `compiler-rt` side of the
patch I've used to get them in sync for the `amd64-pc-solaris2.11` and
`sparc64-unknown-linux-gnu` release builds.
Tested on `amd64-pc-solaris2.11` and `sparc64-unknown-linux-gnu`.
Differential Revision: https://reviews.llvm.org/D133406
that can lead to security vulnerabilities
Also, fix a few places that were causing -Wshadow and
-Wformat-nonliteral warnings to be emitted.
This reapplies the patch that was reverted in caaafe4ae250 because it
broke Fuchsia builders.
I reverted the changes I made to InstrProfData.inc and instead renamed
the variables in InstrProfilingWriter.c. Also fixed a bug in function
add_security_warnings that was causing it to pass -Wformat-nonliteral
when the compiler doesn't support it.
that can lead to security vulnerabilities
Also, fix a few places that were causing -Wshadow and
-Wformat-nonliteral warnings to be emitted.
This reapplies the patch that was reverted in 0d66dc57e8c7 because it
broke a few bots.
I made changes so that cmake checks whether some of the flags are
supported by the compiler that is used before adding them to the list.
Also, I moved function add_security_warnings to CompilerRTUtils.cmake so
that it is defined before it's used.
Differential Revision: https://reviews.llvm.org/D131714
We held off on this before as `LLVM_LIBDIR_SUFFIX` conflicted with it.
Now we return this.
`LLVM_LIBDIR_SUFFIX` is kept as a deprecated way to set
`CMAKE_INSTALL_LIBDIR`. The other `*_LIBDIR_SUFFIX` are just removed
entirely.
I imagine this is too potentially-breaking to make LLVM 15. That's fine.
I have a more minimal version of this in the disto (NixOS) patches for
LLVM 15 (like previous versions). This more expansive version I will
test harder after the release is cut.
Reviewed By: sebastian-ne, ldionne, #libc, #libc_abi
Differential Revision: https://reviews.llvm.org/D130586
This avoids the need for string-ification and lets CMake deduplicate
potentially duplicate flags.
Differential Revision: https://reviews.llvm.org/D122750
When `compiler-rt` is configured as a runtime, the configure-time target
detection for builtins is done in compile-only mode, which is basically a
test of whether the newly-built `clang` can compile a simple program with
an additional flag (`-m32` and `-m64` in my case). The problem is that on
my Debian system `clang` can compile `int foo(int x, int y) { return x + y; }`
with `-m32` but fails to include `limits.h` (or any other target-specific
header) for the `i386` target:
```
$ /path/to/build/./bin/clang --target=x86_64-unknown-linux-gnu -DVISIBILITY_HIDDEN -O3 -DNDEBUG -m32 -std=c11 -fPIC -fno-builtin -fvisibility=hidden -fomit-frame-pointer -MD -MT CMakeFiles/clang_rt.builtins-i386.dir/absvdi2.c.o -MF CMakeFiles/clang_rt.builtins-i386.dir/absvdi2.c.o.d -o CMakeFiles/clang_rt.builtins-i386.dir/absvdi2.c.o -c /path/to/src/compiler-rt/lib/builtins/absvdi2.c
In file included from /path/to/src/compiler-rt/lib/builtins/absvdi2.c:13:
In file included from /path/to/src/compiler-rt/lib/builtins/int_lib.h:93:
In file included from /path/to/build/lib/clang/15.0.0/include/limits.h:21:
In file included from /usr/include/limits.h:25:
/usr/include/features.h:364:12: fatal error: 'sys/cdefs.h' file not found
^~~~~~~~~~~~~
1 error generated.
```
This is an attempt to make the target detection more robust: extend the test
program with `#include <limits.h>`.
Differential Revision: https://reviews.llvm.org/D127975
This avoids the need for string-ification and lets CMake deduplicate
potentially duplicate flags.
Differential Revision: https://reviews.llvm.org/D122750
This is useful when building a complete toolchain to ensure that CRT
is built after builtins but before the rest of the compiler-rt.
Differential Revision: https://reviews.llvm.org/D120682
This is useful when building a complete toolchain to ensure that CRT
is built after builtins but before the rest of the compiler-rt.
Differential Revision: https://reviews.llvm.org/D120682
This clarifies that this is an LLVM specific variable and avoids
potential conflicts with other projects.
Differential Revision: https://reviews.llvm.org/D119918
This is useful when building a complete toolchain to ensure that CRT
is built after builtins but before the rest of the compiler-rt.
Differential Revision: https://reviews.llvm.org/D120682
This reverts commit 910a642c0a5b66a8d2517026b890a1acdc447f19.
There are serious correctness issues with the current approach: __sync_*
routines which are not actually atomic should not be enabled by default.
I'll continue discussion on the review.
ARMv5 and older architectures don’t support SMP and do not have atomic instructions. Still they’re in use in IoT world, where one has to stick to libgcc.
Reviewed By: mstorsjo
Differential Revision: https://reviews.llvm.org/D116088
This way, we do not need to set LLVM_CMAKE_PATH to LLVM_CMAKE_DIR when (NOT LLVM_CONFIG_FOUND)
Reviewed By: #libc, ldionne
Differential Revision: https://reviews.llvm.org/D107717
This is a second attempt at D101497, which landed as
9a9bc76c0eb72f0f2732c729a460abbd5239c2e3 but had to be reverted in
8cf7ddbdd4e5af966a369e170c73250f2e3920e7.
This issue was that in the case that `COMPILER_RT_INSTALL_PATH` is
empty, expressions like "${COMPILER_RT_INSTALL_PATH}/bin" evaluated to
"/bin" not "bin" as intended and as was originally.
One solution is to make `COMPILER_RT_INSTALL_PATH` always non-empty,
defaulting it to `CMAKE_INSTALL_PREFIX`. D99636 adopted that approach.
But, I think it is more ergonomic to allow those project-specific paths
to be relative the global ones. Also, making install paths absolute by
default inhibits the proper behavior of functions like
`GNUInstallDirs_get_absolute_install_dir` which make relative install
paths absolute in a more complicated way.
Given all this, I will define a function like the one asked for in
https://gitlab.kitware.com/cmake/cmake/-/issues/19568 (and needed for a
similar use-case).
---
Original message:
Instead of using `COMPILER_RT_INSTALL_PATH` through the CMake for
complier-rt, just use it to define variables for the subdirs which
themselves are used.
This preserves compatibility, but later on we might consider getting rid
of `COMPILER_RT_INSTALL_PATH` and just changing the defaults for the
subdir variables directly.
---
There was a seaming bug where the (non-Apple) per-target libdir was
`${target}` not `lib/${target}`. I suspect that has to do with the docs
on `COMPILER_RT_INSTALL_PATH` saying was the library dir when that's no
longer true, so I just went ahead and fixed it, allowing me to define
fewer and more sensible variables.
That last part should be the only behavior changes; everything else
should be a pure refactoring.
---
I added some documentation of these variables too. In particular, I
wanted to highlight the gotcha where `-DSomeCachePath=...` without the
`:PATH` will lead CMake to make the path absolute. See [1] for
discussion of the problem, and [2] for the brief official documentation
they added as a result.
[1]: https://cmake.org/pipermail/cmake/2015-March/060204.html
[2]: https://cmake.org/cmake/help/latest/manual/cmake.1.html#options
In 38b2dec37ee735d5409148e71ecba278caf0f969 the problem was somewhat
misidentified and so `:STRING` was used, but `:PATH` is better as it
sets the correct type from the get-go.
---
D99484 is the main thrust of the `GnuInstallDirs` work. Once this lands,
it should be feasible to follow both of these up with a simple patch for
compiler-rt analogous to the one for libcxx.
Reviewed By: phosek, #libc_abi, #libunwind
Differential Revision: https://reviews.llvm.org/D105765
This reverts commit 9a9bc76c0eb72f0f2732c729a460abbd5239c2e3.
That commit broke "ninja install" when building compiler-rt for mingw
targets, building standalone (pointing cmake at the compiler-rt
directory) with cmake 3.16.3 (the one shipped in ubuntu 20.04), with
errors like this:
-- Install configuration: "Release"
CMake Error at cmake_install.cmake:44 (file):
file cannot create directory: /include/sanitizer. Maybe need
administrative privileges.
Call Stack (most recent call first):
/home/martin/code/llvm-mingw/src/llvm-project/compiler-rt/build-i686-sanitizers/cmake_install.cmake:37 (include)
FAILED: include/CMakeFiles/install-compiler-rt-headers
cd /home/martin/code/llvm-mingw/src/llvm-project/compiler-rt/build-i686-sanitizers/include && /usr/bin/cmake -DCMAKE_INSTALL_COMPONENT="compiler-rt-headers" -P /home/martin/code/llvm-mingw/src/llvm-project/compiler-rt/build-i686-sanitizers/cmake_install.cmake
ninja: build stopped: subcommand failed.
Instead of using `COMPILER_RT_INSTALL_PATH` through the CMake for
complier-rt, just use it to define variables for the subdirs which
themselves are used.
This preserves compatibility, but later on we might consider getting rid
of `COMPILER_RT_INSTALL_PATH` and just changing the defaults for the
subdir variables directly.
---
There was a seaming bug where the (non-Apple) per-target libdir was
`${target}` not `lib/${target}`. I suspect that has to do with the docs
on `COMPILER_RT_INSTALL_PATH` saying was the library dir when that's no
longer true, so I just went ahead and fixed it, allowing me to define
fewer and more sensible variables.
That last part should be the only behavior changes; everything else
should be a pure refactoring.
---
D99484 is the main thrust of the `GnuInstallDirs` work. Once this lands,
it should be feasible to follow both of these up with a simple patch for
compiler-rt analogous to the one for libcxx.
Reviewed By: phosek
Differential Revision: https://reviews.llvm.org/D101497
Currently, the compiler-rt build system checks only whether __X86_64
is defined to determine whether the default compiler-rt target arch
is x86_64. Since x32 defines __X86_64 as well, we must also check that
the default pointer size is eight bytes and not four bytes to properly
detect a 64-bit x86_64 compiler-rt default target arch.
Reviewed By: hvdijk, vitalybuka
Differential Revision: https://reviews.llvm.org/D99988
The previous check was wrong because it only checks that the LLVM CMake
directory exists. However, it's possible that the directory exists but
the `LLVMConfig.cmake` file does not. When this happens we would
incorectly try to include the non-existant file.
To fix this we make the check stricter by checking that the file
we want to include actually exists.
This is a follow up to fd28517d878e1d3d14f492ab659aabdf729fd331.
rdar://76870467
Previously it wasn't possible to configure a standalone compiler-rt
build if the `LLVMConfig.cmake` file isn't present in a shipped
toolchain.
This patch adds a fallback behaviour for when `LLVMConfig.cmake` is not
available in the toolchain being used for configure. The fallback
behaviour mocks out the bare minimum required to make a configure
succeed when the host is Darwin. Support for other platforms could
be added in future patches.
The new code path is taken either in one of the following cases:
* `llvm-config` is not available.
* `llvm-config` is available but it provides an invalid path for the CMake files.
The motivation here is to be able to generate the compiler-rt lit test
suites for an arbitrary LLVM toolchain and then run the tests against
it.
The invocation to do this looks something like.
```
CC=/path/to/cc \
CXX=/path/to/c++ \
cmake \
-G Ninja \
-DLLVM_CONFIG_PATH=/path/to/llvm-config \
-DCOMPILER_RT_INCLUDE_TESTS=ON \
/path/to/llvm-project/compiler-rt
# Note we don't compile compiler-rt in this workflow.
bin/llvm-lit -v test/path/to/generated/test_suite
```
A possible alternative approach is to configure the
`cmake/modules/LLVMConfig.cmake.in` file in the LLVM source tree
and then include it. This approach was not taken because it is more
complicated.
An interesting side benefit of this patch is that it is now
possible to configure on Darwin without `llvm-config` being available
by configuring with `-DLLVM_CONFIG_PATH=""`. This moves us a step
closer to a world where no LLVM build artefacts are required to
build compiler-rt.
rdar://76016632
Differential Revision: https://reviews.llvm.org/D99621
layout.
When doing a standalone compiler-rt build we currently rely on
getting information from the `llvm-config` binary. Previously
we would rely on calling `llvm-config --src-root` to find the
LLVM sources. Unfortunately the returned path could easily be wrong
if the sources were built on another machine.
Now that compiler-rt is part of a monorepo we can easily fix this
problem by finding the LLVM source tree next to `compiler-rt` in
the monorepo. We do this regardless of whether or not the `llvm-config`
binary is available which moves us one step closer to not requiring
`llvm-config` to be available.
To try avoid anyone breaking anyone who relies on the current behavior,
if the path assuming the monorepo layout doesn't exist we invoke
`llvm-config --src-root` to get the path. A deprecation warning is
emitted if this path is taken because we should remove this path
in the future given that other runtimes already assume the monorepo
layout.
We also now emit a warning if `LLVM_MAIN_SRC_DIR` does not exist.
The intention is that this should be a hard error in future but
to avoid breaking existing users we'll keep this as a warning
for now.
rdar://76016632
Differential Revision: https://reviews.llvm.org/D99620
Don't normalize arm architecture names; doing that loses the ability
to pick the right implementation of builtins for each architecture
variant. When building compiler-rt builtins as part of a
runtimes build, builtins for multiple armv* variants could be built
in the same directory, and with the simplified architecture name,
they'd all be built in the same directory, overlapping each other.
This corresponds to getArchNameForCompilerRTLib in clang; any
32 bit x86 architecture triple (except on android, but those
exceptions are already handled in compiler-rt on a different level)
get the compiler rt library names with i386; arm targets get either
"arm" or "armhf". (Mapping to "armhf" is handled in the toplevel
CMakeLists.txt.)
Differential Revision: https://reviews.llvm.org/D98173
While sanitizers don't use C++ standard library, we could still end
up accidentally including or linking it just by the virtue of using
the C++ compiler. Pass -nostdinc++ and -nostdlib++ to avoid these
accidental dependencies.
Differential Revision: https://reviews.llvm.org/D88922
This patch enables support for building compiler-rt builtins for 32-bit
Power arch on AIX. For now, we leave out the specialized ppc builtin
implementations for 128-bit long double and friends since those will
need some special handling for AIX.
Reviewed By: hubert.reinterpretcast
Differential Revision: https://reviews.llvm.org/D87383
For Android only, compiler-rt used detect_target_arch to select the
architecture to target. detect_target_arch was added in Sept 2014
(SVN r218605). At that time, compiler-rt selected the default arch
using ${LLVM_NATIVE_ARCH}, which seems to have been the host
architecture and therefore not suitable for cross-compilation.
The compiler-rt build system was refactored in Sept 2015 (SVN r247094
and SVN r247099) to use COMPILER_RT_DEFAULT_TARGET_TRIPLE to control
the target arch rather than LLVM_NATIVE_ARCH. This approach is simpler
and also works for Android cross-compilation, so remove the
detect_target_arch function.
Android targets i686, but compiler-rt seems to identify 32-bit x86 as
"i386". For Android, we were previously calling add_default_target_arch
with i386, and calling add_default_target_arch with i686 does not build
anything. i686 is not listed in builtin-config-ix.cmake,
ALL_BUILTIN_SUPPORTED_ARCH.
Differential Revision: https://reviews.llvm.org/D82148
Split filter_builtin_sources into two functions:
- filter_builtin_sources that removes generic files when an
arch-specific file is selected.
- darwin_filter_builtin_sources that implements the EXCLUDE/INCLUDE
lists (using the files in lib/builtins/Darwin-excludes).
darwin_filter_builtin_sources delegates to filter_builtin_sources.
Previously, lib/builtins/CMakeLists.txt had a number of calls to
filter_builtin_sources (with a confusing/broken use of the
`excluded_list` parameter), as well as a redundant arch-vs-generic
filtering for the non-Apple code path at the end of the file. Replace
all of this with a single call to filter_builtin_sources.
Remove i686_SOURCES. Previously, this list contained only the
arch-specific files common to 32-bit and 64-bit x86, which is a strange
set. Normally the ${ARCH}_SOURCES list contains everything needed for
the arch. "i686" isn't in ALL_BUILTIN_SUPPORTED_ARCH.
NFCI, but i686_SOURCES won't be defined, and the order of files in
${arch}_SOURCES lists will change.
Differential Revision: https://reviews.llvm.org/D82151
