g++ -flto has a diagnostic `-Wodr` about mismatched redeclarations,
which even apply to `enum`.
Fix#83529
Reviewers: thesamesam
Reviewed By: thesamesam
Pull Request: https://github.com/llvm/llvm-project/pull/83604
Based on https://reviews.llvm.org/D45375 . Introduce a new InputFile
kind `InternalKind`, use it for
* `ctx.internalFile`: for linker-defined symbols and some synthesized
`Undefined`
* `createInternalFile`: for symbol assignments and --defsym
I picked "internal" instead of "synthetic" to avoid confusion with
SyntheticSection.
Currently a symbol's file is one of: nullptr, ObjKind, SharedKind,
BitcodeKind, BinaryKind. Now it's non-null (I plan to add an
`assert(file)` to Symbol::Symbol and change `toString(const InputFile
*)`
separately).
Debugging and error reporting gets improved. The immediate user-facing
difference is more descriptive "File" column in the --cref output. This
patch may unlock further simplification.
Currently each symbol assignment gets its own
`createInternalFile(cmd->location)`. Two symbol assignments in a linker
script do not share the same file. Making the file the same would be
nice, but would require non trivial code.
When the .eh_frame section is placed at a non-zero
offset within its output section, the relocation
value within .eh_frame are computed incorrectly.
We had similar issue in .ARM.exidx section and it has been
fixed already in https://reviews.llvm.org/D148033.
While applying the relocation using S+A-P, the value
of P (the location of the relocation) is getting wrong.
P is:
P = SecAddr + rel.offset, But SecAddr points to the
starting address of the outputsection rather than the
starting address of the eh frame section within that
output section.
This issue affects all targets which generates .eh_frame
section. Hence fixing in all the corresponding targets it affecting.
D153645 added additional X-Form load/stores that can be generated for TLS accesses.
However, these added instructions have not been accounted for in lld. As a result,
lld does not know how to handle them and cannot relax initial-exec to local-exec
when the initial-exec sequence contains these additional load/stores.
This patch aims to resolve https://github.com/llvm/llvm-project/issues/64424.
Differential Revision: https://reviews.llvm.org/D158197
As per the ABI at
https://github.com/ARM-software/abi-aa/blob/main/memtagabielf64/memtagabielf64.rst,
this patch interprets the SHT_AARCH64_MEMTAG_GLOBALS_STATIC section,
which contains R_NONE relocations to tagged globals, and emits a
SHT_AARCH64_MEMTAG_GLOBALS_DYNAMIC section, with the correct
DT_AARCH64_MEMTAG_GLOBALS and DT_AARCH64_MEMTAG_GLOBALSSZ dynamic
entries. This section describes, in a uleb-encoded stream, global memory
ranges that should be tagged with MTE.
We are also out of bits to spare in the LLD Symbol class. As a result,
I've reused the 'needsTocRestore' bit, which is a PPC64 only feature.
Now, it's also used for 'isTagged' on AArch64.
An entry in SHT_AARCH64_MEMTAG_GLOBALS_STATIC is practically a guarantee
from an objfile that all references to the linked symbol are through the
GOT, and meet correct alignment requirements. As a result, we go through
all symbols and make sure that, for all symbols $SYM, all object files
that reference $SYM also have a SHT_AARCH64_MEMTAG_GLOBALS_STATIC entry
for $SYM. If this isn't the case, we demote the symbol to being
untagged. Symbols that are imported from other DSOs should always be
fine, as they're GOT-referenced (and thus the GOT entry either has the
correct tag or not, depending on whether it's tagged in the defining DSO
or not).
Additionally hand-tested by building {libc, libm, libc++, libm, and libnetd}
on Android with some experimental MTE globals support in the
linker/libc.
Reviewed By: MaskRay, peter.smith
Differential Revision: https://reviews.llvm.org/D152921
to prepare for changing `relocations` from a SmallVector to a pointer.
Also change the `isec` parameter in `addAddendOnlyRelocIfNonPreemptible` to `GotSection &`.
The target-specific code (AArch64, PPC64) does not fit into the generic code and
adds virtual function overhead. Move relocateAlloc into ELF/Arch/ instead. This
removes many virtual functions (relaxTls*). In addition, this helps get rid of
getRelocTargetVA dispatch and many RelExpr members in the future.
Add LLVM_LIBRARY_VISIBILITY to remove unneeded GOT and unique_ptr
indirection. We can move other global variables into ctx without
indirection concern. In the long term we may consider passing Ctx
as a parameter to various functions and eliminate global state as
much as possible and then remove `Ctx::reset`.
Reported by Stefan Pintilie in D119773.
For a branch to a hidden undefined weak symbol, there is an
`assert(sym->getVA());` failure in PPC64LongBranchTargetSection::writeTo for a
-no-pie link. The root cause is that we unnecessarily create the thunk for the
-no-pie link.
Fix this by changing the condition to just `s.isUndefined()`. See the inline
comment.
Rename ppc64-weak-undef-call.s to ppc64-undefined-weak.s to be consistent with
other architectures.
Reviewed By: sfertile, stefanp
Differential Revision: https://reviews.llvm.org/D119787
Currently `this->getName() == newSym.getName()`.
By keeping the old nameData/nameSize, newSym's nameData/nameSize will be
ignored. The call sites can avoid calling getName().
printTraceSymbol needs to take the symbol name since `other`'s name is empty.
Move all variables at file-scope or function-static-scope into a hosting structure (lld::CommonLinkerContext) that lives at lldMain()-scope. Drivers will inherit from this structure and add their own global state, in the same way as for the existing COFFLinkerContext.
See discussion in https://lists.llvm.org/pipermail/llvm-dev/2021-June/151184.html
Differential Revision: https://reviews.llvm.org/D108850
to decrease sizeof(SymbolUnion) by 8 on ELF64 platforms.
Symbols needing such information are typically 1% or fewer (5134 out of 560520
when linking clang, 19898 out of 5550705 when linking chrome). Storing them
elsewhere can decrease memory usage and symbol initialization time.
There is a ~0.8% saving on max RSS when linking a large program.
Future direction:
* Move some of dynsymIndex/verdefIndex/versionId to SymbolAux
* Support mixed TLSDESC and TLS GD without increasing sizeof(SymbolUnion)
Reviewed By: peter.smith
Differential Revision: https://reviews.llvm.org/D116281
For `InputSection` `.foo`, its `InputBaseSection::{areRelocsRela,firstRelocation,numRelocation}` basically
encode the information of `.rel[a].foo`. However, one uint32_t (the relocation section index)
suffices. See the implementation of `relsOrRelas`.
This change decreases sizeof(InputSection) from 184 to 176 on 64-bit Linux.
The maximum resident set size linking a large application (1.2G output) decreases by 0.39%.
Differential Revision: https://reviews.llvm.org/D112513
Most architectures use .got instead of .got.plt, so switching the default can
minimize customization.
This fixes an issue for SPARC V9 which uses .got .
AVR, AMDGPU, and MSP430 don't seem to use _GLOBAL_OFFSET_TABLE_.
There is a bug when initial exec is relaxed to local exec.
In the following situation:
InitExec.c
```
extern __thread unsigned TGlobal;
unsigned getConst(unsigned*);
unsigned addVal(unsigned, unsigned*);
unsigned GetAddrT() {
return addVal(getConst(&TGlobal), &TGlobal);
}
```
Def.c
```
__thread unsigned TGlobal;
unsigned getConst(unsigned* A) {
return *A + 3;
}
unsigned addVal(unsigned A, unsigned* B) {
return A + *B;
}
```
The problem is in InitExec.c but Def.c is required if you want to link the example and see the problem.
To compile everything:
```
clang -O3 -mcpu=pwr10 -c InitExec.c
clang -O3 -mcpu=pwr10 -c Def.c
ld.lld InitExec.o Def.o -o IeToLe
```
If you objdump the problem object file:
```
$ llvm-objdump -dr --mcpu=pwr10 InitExec.o
```
you will get the following assembly:
```
0000000000000000 <GetAddrT>:
0: a6 02 08 7c mflr 0
4: f0 ff c1 fb std 30, -16(1)
8: 10 00 01 f8 std 0, 16(1)
c: d1 ff 21 f8 stdu 1, -48(1)
10: 00 00 10 04 00 00 60 e4 pld 3, 0(0), 1
0000000000000010: R_PPC64_GOT_TPREL_PCREL34 TGlobal
18: 14 6a c3 7f add 30, 3, 13
0000000000000019: R_PPC64_TLS TGlobal
1c: 78 f3 c3 7f mr 3, 30
20: 01 00 00 48 bl 0x20
0000000000000020: R_PPC64_REL24_NOTOC getConst
24: 78 f3 c4 7f mr 4, 30
28: 30 00 21 38 addi 1, 1, 48
2c: 10 00 01 e8 ld 0, 16(1)
30: f0 ff c1 eb ld 30, -16(1)
34: a6 03 08 7c mtlr 0
38: 00 00 00 48 b 0x38
0000000000000038: R_PPC64_REL24_NOTOC addVal
```
The lines of interest are:
```
10: 00 00 10 04 00 00 60 e4 pld 3, 0(0), 1
0000000000000010: R_PPC64_GOT_TPREL_PCREL34 TGlobal
18: 14 6a c3 7f add 30, 3, 13
0000000000000019: R_PPC64_TLS TGlobal
1c: 78 f3 c3 7f mr 3, 30
```
Which once linked gets turned into:
```
10010210: ff ff 03 06 00 90 6d 38 paddi 3, 13, -28672, 0
10010218: 00 00 00 60 nop
1001021c: 78 f3 c3 7f mr 3, 30
```
The problem is that register 30 is never set after the optimization.
Therefore it is not correct to relax the above instructions by replacing
the add instruction with a nop.
Instead the add instruction should be replaced with a copy (mr) instruction.
If the add uses the same resgiter as input and as ouput then it is safe to
continue to replace the add with a nop.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D95262
R_PPC64_ADDR16_HI represents bits 16-31 of a 32-bit value
R_PPC64_ADDR16_HIGH represents bits 16-31 of a 64-bit value.
In the Linux kernel, `LOAD_REG_IMMEDIATE_SYM` defined in `arch/powerpc/include/asm/ppc_asm.h`
uses @l, @high, @higher, @highest to load the 64-bit value of a symbol.
Fixes https://github.com/ClangBuiltLinux/linux/issues/1260
The scope of R_TLS (TP offset relocation types (TPREL/TPOFF) used for the
local-exec TLS model) is actually narrower than its name may imply. R_TLS_NEG
is only used by Solaris R_386_TLS_LE_32.
Rename them so that they will be less confusing.
Reviewed By: grimar, psmith, rprichard
Differential Revision: https://reviews.llvm.org/D93467
With this change, `TargetInfo::adjustRelaxExpr` is only related to TLS
relaxations and a subsequent clean-up can delete the `data` parameter.
Differential Revision: https://reviews.llvm.org/D92079
Add support to LLD for PC Relative Thread Local Storage for Local Dynamic.
This patch adds support for two relocations: R_PPC64_GOT_TLSLD_PCREL34 and
R_PPC64_DTPREL34.
The Local Dynamic code is:
```
pla r3, x@got@tlsld@pcrel R_PPC64_GOT_TLSLD_PCREL34
bl __tls_get_addr@notoc(x@tlsld) R_PPC64_TLSLD
R_PPC64_REL24_NOTOC
...
paddi r9, r3, x@dtprel R_PPC64_DTPREL34
```
After relaxation to Local Exec:
```
paddi r3, r13, 0x1000
nop
...
paddi r9, r3, x@dtprel R_PPC64_DTPREL34
```
Reviewed By: NeHuang, sfertile
Differential Revision: https://reviews.llvm.org/D87504
Add Thread Local Storage support for the 34 bit relocation R_PPC64_GOT_TLSGD_PCREL34 used in General Dynamic.
The compiler will produce code that looks like:
```
pla r3, x@got@tlsgd@pcrel R_PPC64_GOT_TLSGD_PCREL34
bl __tls_get_addr@notoc(x@tlsgd) R_PPC64_TLSGD
R_PPC64_REL24_NOTOC
```
LLD should be able to correctly compute the relocation for R_PPC64_GOT_TLSGD_PCREL34 as well as do the following two relaxations where possible:
General Dynamic to Local Exec:
```
paddi r3, r13, x@tprel
nop
```
and General Dynamic to Initial Exec:
```
pld r3, x@got@tprel@pcrel
add r3, r3, r13
```
Note:
This patch adds support for the PC Relative (no TOC) version of General Dynamic on top of the existing support for the TOC version of General Dynamic.
The ABI does not provide any way to tell by looking only at the relocation `R_PPC64_TLSGD` when it is being used in a TOC instruction sequence or and when it is being used in a no TOC sequence. The TOC sequence should always be 4 byte aligned. This patch adds one to the offset of the relocation when it is being used in a no TOC sequence. In this way LLD can tell by looking at the alignment of the offset of `R_PPC64_TLSGD` whether or not it is being used as part of a TOC or no TOC sequence.
Reviewed By: NeHuang, sfertile, MaskRay
Differential Revision: https://reviews.llvm.org/D87318
Add Thread Local Storage support for the 34 bit relocation R_PPC64_GOT_TLSGD_PCREL34 used in General Dynamic.
The compiler will produce code that looks like:
```
pla r3, x@got@tlsgd@pcrel R_PPC64_GOT_TLSGD_PCREL34
bl __tls_get_addr@notoc(x@tlsgd) R_PPC64_TLSGD
R_PPC64_REL24_NOTOC
```
LLD should be able to correctly compute the relocation for R_PPC64_GOT_TLSGD_PCREL34 as well as do the following two relaxations where possible:
General Dynamic to Local Exec:
```
paddi r3, r13, x@tprel
nop
```
and General Dynamic to Initial Exec:
```
pld r3, x@got@tprel@pcrel
add r3, r3, r13
```
Note:
This patch adds support for the PC Relative (no TOC) version of General Dynamic on top of the existing support for the TOC version of General Dynamic.
The ABI does not provide any way to tell by looking only at the relocation `R_PPC64_TLSGD` when it is being used in a TOC instruction sequence or and when it is being used in a no TOC sequence. The TOC sequence should always be 4 byte aligned. This patch adds one to the offset of the relocation when it is being used in a no TOC sequence. In this way LLD can tell by looking at the alignment of the offset of `R_PPC64_TLSGD` whether or not it is being used as part of a TOC or no TOC sequence.
Reviewed By: NeHuang, sfertile, MaskRay
Differential Revision: https://reviews.llvm.org/D87318
Add Thread Local Storage Initial Exec support to LLD.
This patch adds the computation for the relocations as well as the relaxation from Initial Exec to Local Exec.
Initial Exec:
```
pld r9, x@got@tprel@pcrel
add r9, r9, x@tls@pcrel
```
or
```
pld r9, x@got@tprel@pcrel
lbzx r10, r9, x@tls@pcrel
```
Note that @tls@pcrel is actually encoded as R_PPC64_TLS with a one byte displacement.
For the above examples relaxing Intitial Exec to Local Exec:
```
paddi r9, r9, x@tprel
nop
```
or
```
paddi r9, r13, x@tprel
lbz r10, 0(r9)
```
Reviewed By: nemanjai, MaskRay, #powerpc
Differential Revision: https://reviews.llvm.org/D86893
Add Thread Local Storage Local Exec support to LLD. This is to support PC Relative addressing of Local Exec.
The patch teaches LLD to handle:
```
paddi r9, r13, x1@tprel
```
The relocation is:
```
R_PPC_TPREL34
```
Reviewed By: NeHuang, MaskRay
Differential Revision: https://reviews.llvm.org/D86608
`ELFFile<ELFT>` has many methods that take pointers,
though they assume that arguments are never null and
hence could take references instead.
This patch performs such clean-up.
Differential revision: https://reviews.llvm.org/D87385
This patch implements the handling for the R_PPC64_PCREL_OPT relocation as well
as the GOT relocation for the associated R_PPC64_GOT_PCREL34 relocation.
On Power10 targets with PC-Relative addressing, the linker can relax
GOT-relative accesses to PC-Relative under some conditions. Since the sequence
consists of a prefixed load, followed by a non-prefixed access (load or store),
the linker needs to replace the first instruction (as the replacement
instruction will be prefixed). The compiler communicates to the linker that
this optimization is safe by placing the two aforementioned relocations on the
GOT load (of the address).
The linker then does two things:
- Convert the load from the got into a PC-Relative add to compute the address
relative to the PC
- Find the instruction referred to by the second relocation (R_PPC64_PCREL_OPT)
and replace the first with the PC-Relative version of it
It is important to synchronize the mapping from legacy memory instructions to
their PC-Relative form. Hence, this patch adds a file to be included by both
the compiler and the linker so they're always in agreement.
Differential revision: https://reviews.llvm.org/D84360
This patch supports the situation where caller does not have a valid TOC and
calls using the R_PPC64_REL24_NOTOC relocation and the callee is not DSO local.
In this case the call cannot be made directly since the callee may or may not
require a valid TOC pointer. As a result this situation require a PC-relative
plt stub to set up r12.
Reviewed By: sfertile, MaskRay, stefanp
Differential Revision: https://reviews.llvm.org/D83669
