This is an ongoing series of commits that are reformatting our Python
code. Reformatting is done with `black` (23.1.0).
If you end up having problems merging this commit because you have made
changes to a python file, the best way to handle that is to run `git
checkout --ours <yourfile>` and then reformat it with black.
RFC: https://discourse.llvm.org/t/rfc-document-and-standardize-python-code-style
Differential revision: https://reviews.llvm.org/D151460
YAML specification does not allow keys duplication an a mapping. However, YAML
parser in LLVM does not have any check on that and uses only the last key entry.
In this change duplicated keys are merged to satisfy the spec.
Differential Revision: https://reviews.llvm.org/D143727
I went over the output of the following mess of a command:
(ulimit -m 2000000; ulimit -v 2000000; git ls-files -z | parallel
--xargs -0 cat | aspell list --mode=none --ignore-case | grep -E
'^[A-Za-z][a-z]*$' | sort | uniq -c | sort -n | grep -vE '.{25}' |
aspell pipe -W3 | grep : | cut -d' ' -f2 | less)
and proceeded to spend a few days looking at it to find probable typos
and fixed a few hundred of them in all of the llvm project (note, the
ones I found are not anywhere near all of them, but it seems like a
good start).
Differential revision: https://reviews.llvm.org/D131122
Add a function to make it easier to debug a test failure caused by an
unexpected stop reason. This is similar to the assertState helper that
was added in ce825e46743b.
Before:
self.assertEqual(stop_reason, lldb.eStopReasonInstrumentation)
AssertionError: 5 != 10
After:
self.assertStopReason(stop_reason, lldb.eStopReasonInstrumentation)
AssertionError: signal (5) != instrumentation (10)
Differential revision: https://reviews.llvm.org/D131083
Eliminate boilerplate of having each test manually assign to `mydir` by calling
`compute_mydir` in lldbtest.py.
Differential Revision: https://reviews.llvm.org/D128077
Replace forms of `assertTrue(err.Success())` with `assertSuccess(err)` (added in D82759).
* `assertSuccess` prints out the error's message
* `assertSuccess` expresses explicit higher level semantics, both to the reader and for test failure output
* `assertSuccess` seems not to be well known, using it where possible will help spread knowledge
* `assertSuccess` statements are more succinct
Differential Revision: https://reviews.llvm.org/D119616
These tests fail if you build without the x86 llvm backend.
Either because they use an x86 triple or try to backtrace which
requires some x86 knowledge to see all frames.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D100194
This allows the Target to update its module list when loading a shared
module replaces an equivalent one.
A testcase is added which hits this codepath -- without the fix, the
target reports libbreakpad.so twice in its module list.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D89157
When opening a minidump, we might discover that it reports a UUID for a
module that doesn't match the build ID, but rather a hash of the .text
section (according to either of two different hash functions, used by
breakpad and Facebook respectively). The current logic searches for a
module by filename only to check the hash; this change updates it to
first search by directory+filename. This is important when the
directory specified in the minidump must be interpreted relative to a
user-provided sysoort, as the leaf directory won't be in the search path
in that case.
Also add a regression test; without this change, module validation fails
because we have just the placeholder module which reports as its path
the platform path in the minidump.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D89155
The minidump-sysroot test I added in commit 20f84257 compares two paths
using a string comparison. This causes the Windows buildbot to fail
because of mismatched forward slashes and backslashes. Use
os.path.normcase to normalize before comparing.
When the various methods of locating the module in GetRemoteSharedModule
fail, make sure we pass the original module spec to the bail-out call to
the provided resolver function.
Also make sure we consistently use the resolved module spec from the
various success paths.
Thanks to what appears to have been an accidentally inverted condition
(commit 85967fa applied the new condition to a path where GetModuleSpec
returns false, but should have applied it when GetModuleSpec returns
true), without this fix we only pass the original module spec in the
fallback if the original spec has no uuid (or has a uuid that somehow
matches the resolved module's uuid despite the call to GetModuleSpec
failing). This manifested as a bug when processing a minidump file with
a user-provided sysroot, since in that case the resolver call was being
applied to resolved_module_spec (despite resolution failing), which did
not have the path of its file_spec set.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D88099
Breakpad will always have a UUID for binaries when it creates minidump files. If an ELF files has a GNU build ID, it will use that. If it doesn't, it will create one by hashing up to the first 4096 bytes of the .text section. LLDB was not able to load these binaries even when we had the right binary because the UUID didn't match. LLDB will use the GNU build ID first as the main UUID for a binary and fallback onto a 8 byte CRC if a binary doesn't have one. With this fix, we will check for the Breakpad hash or the Facebook hash (a modified version of the breakpad hash that collides a bit less) and accept binaries when these hashes match.
Differential Revision: https://reviews.llvm.org/D86261
SBFileSpec.fullpath always uses the forward slash to join the directory with the
base name. This causes mismatches when comparing Windows paths with backslashes
in two of the minidump tests. To get around that we just compare the directory
names separately from the filenames.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D81465
SBTarget::AddModule currently handles the UUID parameter in a very
weird way: UUIDs with more than 16 bytes are trimmed to 16 bytes. On
the other hand, shorter-than-16-bytes UUIDs are completely ignored. In
this patch, we change the parsing code to handle UUIDs of arbitrary
size.
To support arbitrary size UUIDs in SBTarget::AddModule, this patch
changes UUID::SetFromStringRef to parse UUIDs of arbitrary length. We
subtly change the semantics of SetFromStringRef - SetFromStringRef now
only succeeds if the entire input is consumed to prevent some
prefix-parsing confusion. This is up for discussion, but I believe
this is more consistent - we always return false for invalid UUIDs
rather than sometimes truncating to a valid prefix. Also, all the
call-sites except the API and interpreter seem to expect to consume
the entire input.
This also adds tests for adding existing modules 4-, 16-, and 20-byte
build-ids. Finally, we took the liberty of testing the minidump
scenario we care about - removing placeholder module from minidump and
replacing it with the real module.
Reviewed By: labath, friss
Differential Revision: https://reviews.llvm.org/D80755
After this patch all remaining tests should pass on macOS when replayed
from a reproducer.
To capture the reproducers:
./bin/llvm-lit ../llvm-project/lldb/test/ --param lldb-run-with-repro=capture
To replay the reproducers:
./bin/llvm-lit ../llvm-project/lldb/test/ --param lldb-run-with-repro=replay
Some tests set settings and don't clean them up, this leads to side effects in other tests.
The patch removes a global debugger instance with a per-test debugger to avoid such effects.
From what I see, lldb.DBG was needed to determine the platform before a test is run,
lldb.selected_platform is used for this purpose now. Though, this required adding a new function
to the SBPlatform interface.
Differential Revision: https://reviews.llvm.org/D74903
Summary: Moves lldbsuite tests to lldb/test/API.
This is a largely mechanical change, moved with the following steps:
```
rm lldb/test/API/testcases
mkdir -p lldb/test/API/{test_runner/test,tools/lldb-{server,vscode}}
mv lldb/packages/Python/lldbsuite/test/test_runner/test lldb/test/API/test_runner
for d in $(find lldb/packages/Python/lldbsuite/test/* -maxdepth 0 -type d | egrep -v "make|plugins|test_runner|tools"); do mv $d lldb/test/API; done
for d in $(find lldb/packages/Python/lldbsuite/test/tools/lldb-vscode -maxdepth 1 -mindepth 1 | grep -v ".py"); do mv $d lldb/test/API/tools/lldb-vscode; done
for d in $(find lldb/packages/Python/lldbsuite/test/tools/lldb-server -maxdepth 1 -mindepth 1 | egrep -v "gdbremote_testcase.py|lldbgdbserverutils.py|socket_packet_pump.py"); do mv $d lldb/test/API/tools/lldb-server; done
```
lldb/packages/Python/lldbsuite/__init__.py and lldb/test/API/lit.cfg.py were also updated with the new directory structure.
Reviewers: labath, JDevlieghere
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D71151
