We recently ran into some bad DWARF where the `DW_AT_stmt_list` of many
compile units was randomly set to invalid values and was causing LLDB to
crash due to an assertion about address sizes not matching. Instead of
asserting, we should return an appropriate recoverable `llvm::Error`.
This extends DWARFDebugLine to properly parse line number programs with
maximum_operations_per_instruction > 1 for VLIW targets.
No functions that use that parsed output to retrieve line information
have been extended to support multiple op-indexes. This means that when
retrieving information for an address with multiple op-indexes, e.g.
when using llvm-addr2line, the penultimate row for that address will be
used, which in most cases is the row for the second largest op-index.
This will be addressed in further changes, but this patch at least
allows us to correctly parse such line number programs, with a warning
saying that the line number information may be incorrect (incomplete).
Reviewed By: StephenTozer
Differential Revision: https://reviews.llvm.org/D152536
This is a preparatory patch for extending DWARFDebugLine to properly
parse line number programs with maximum_operations_per_instruction > 1
for VLIW targets.
Add some scaffolding for handling op-index in line number programs, and
add printouts for that in the table. As this affects a lot of tests,
this is done in a separate commit to get a cleaner review for the actual
op-index implementation.
Verbose printouts are not present in many tests, and adding op-index to
those will require a bit more code changes, so that is done in the
actual implementation patch.
Reviewed By: StephenTozer
Differential Revision: https://reviews.llvm.org/D152535
This allows the DWARFDebugLine::SectionParser to try parsing line tables
at 4 or 8-byte boundaries if the unaligned offset appears invalid. If
aligning the offset does not reduce errors the offset is used unchanged.
This is needed for llvm-dwarfdump to be able to extract the line tables
(with --debug-lines) from binaries produced by certain compilers that
like to align each line table in the .debug_line section. Note that this
alignment does not seem to be invalid since the units do point to the
correct line table offsets via the DW_AT_stmt_list attribute.
Differential Revision: https://reviews.llvm.org/D143513
value() has undesired exception checking semantics and calls
__throw_bad_optional_access in libc++. Moreover, the API is unavailable without
_LIBCPP_NO_EXCEPTIONS on older Mach-O platforms (see
_LIBCPP_AVAILABILITY_BAD_OPTIONAL_ACCESS).
This commit fixes LLVMAnalysis and its dependencies.
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
llvm-debuginfo-analyzer is a command line tool that processes debug
info contained in a binary file and produces a debug information
format agnostic “Logical View”, which is a high-level semantic
representation of the debug info, independent of the low-level
format.
The code has been divided into the following patches:
1) Interval tree
2) Driver and documentation
3) Logical elements
4) Locations and ranges
5) Select elements
6) Warning and internal options
7) Compare elements
8) ELF Reader
9) CodeView Reader
Full details:
https://discourse.llvm.org/t/llvm-dev-rfc-llvm-dva-debug-information-visual-analyzer/62570
This patch:
This is a high level summary of the changes in this patch.
ELF Reader
- Support for ELF/DWARF.
LVBinaryReader, LVELFReader
Reviewed By: psamolysov, probinson
Differential Revision: https://reviews.llvm.org/D125783
DWARF v5 6.2.4 The Line Number Program Header says:
> The first entry is the current directory of the compilation. Each additional
> path entry is either a full path name or is relative to the current directory of
> the compilation.
When forming a path, relative DW_AT_comp_dir and directories[0] are not supposed
to be joined together. Fix getFileNameByIndex to special case DWARF v5 DirIdx == 0.
Reviewed By: #debug-info, dblaikie
Differential Revision: https://reviews.llvm.org/D131804
This is minimum changes extracted from https://reviews.llvm.org/D78950. The old patch tried to add LRU eviction of caching data structure. Due to multiple layers of interfaces that users could be using, it was not clear where to put the functionality. While we work out on where to put that functionality, it'll be great to add this minimum interface change so that the user could implement their own memory management. More specifically:
* Add a clearLineTable method for DWARFDebugLine which erases the given offset from the LineTableMap.
* DWARFDebugContext adds the clearLineTableForUnit method that leverages clearLineTable to remove the object corresponding to a given compile unit, for memory management purposes. When it is referred to again, the line table object will be repopulated.
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D90006
Returning `std::array<uint8_t, N>` is better ergonomics for the hashing functions usage, instead of a `StringRef`:
* When returning `StringRef`, client code is "jumping through hoops" to do string manipulations instead of dealing with fixed array of bytes directly, which is more natural
* Returning `std::array<uint8_t, N>` avoids the need for the hasher classes to keep a field just for the purpose of wrapping it and returning it as a `StringRef`
As part of this patch also:
* Introduce `TruncatedBLAKE3` which is useful for using BLAKE3 as the hasher type for `HashBuilder` with non-default hash sizes.
* Make `MD5Result` inherit from `std::array<uint8_t, 16>` which improves & simplifies its API.
Differential Revision: https://reviews.llvm.org/D123100
As usual with that header cleanup series, some implicit dependencies now need to
be explicit:
llvm/DebugInfo/DWARF/DWARFContext.h no longer includes:
- "llvm/DebugInfo/DWARF/DWARFAcceleratorTable.h"
- "llvm/DebugInfo/DWARF/DWARFCompileUnit.h"
- "llvm/DebugInfo/DWARF/DWARFDebugAbbrev.h"
- "llvm/DebugInfo/DWARF/DWARFDebugAranges.h"
- "llvm/DebugInfo/DWARF/DWARFDebugFrame.h"
- "llvm/DebugInfo/DWARF/DWARFDebugLoc.h"
- "llvm/DebugInfo/DWARF/DWARFDebugMacro.h"
- "llvm/DebugInfo/DWARF/DWARFGdbIndex.h"
- "llvm/DebugInfo/DWARF/DWARFSection.h"
- "llvm/DebugInfo/DWARF/DWARFTypeUnit.h"
- "llvm/DebugInfo/DWARF/DWARFUnitIndex.h"
Plus llvm/Support/Errc.h not included by a bunch of llvm/DebugInfo/DWARF/DWARF*.h files
Preprocessed lines to build llvm on my setup:
after: 1065629059
before: 1066621848
Which is a great diff!
Discourse thread: https://discourse.llvm.org/t/include-what-you-use-include-cleanup
Differential Revision: https://reviews.llvm.org/D119723
This makes a bunch of these call sites independent of a follow-up change
I'm making to have getAsCString return Expected<const char*> for more
descriptive error messages so that the failures there can be
communicated up to DWARFVerifier (or other callers who want to provide
more verbose diagnostics) so DWARFVerifier doesn't have to re-implement
the string lookup logic and error checking.
When concatenating directory with filename in getFilenameByIndex, we
might end up with a path that contains extra dots. For example, if the
input is /path and ./example, we would return /path/./example. Run
sys::path::remove_dots on the output to eliminate unnecessary dots.
Differential Revision: https://reviews.llvm.org/D87657
LTO builds have been creating invalid DWARF and one of the errors was a file index that was out of bounds. "llvm-dwarfdump --verify" will check all file indexes for line tables already, but there are no checks for the validity of file indexes in attributes.
The verification will verify if there is a DW_AT_decl_file/DW_AT_call_file that:
- there is a line table for the compile unit
- the file index is valid
- the encoding is appropriate
Tests are added that test all of the above conditions.
Differential Revision: https://reviews.llvm.org/D84817
Previously, the debug line parser would keep attempting to read data
even if it had run out of data to read. This meant errors in parsing
would often end up being reported as something else, such as an unknown
version or malformed directory/filename table. This patch fixes the
issues by using the Cursor API to capture errors.
Reviewed by: labath
Differential Revision: https://reviews.llvm.org/D83043
Previously, if there was an error whilst parsing the operands of an
extended opcode, the operands would be treated as zero and printed. This
could potentially be slightly confusing. This patch changes the
behaviour to print the raw bytes instead.
Reviewed by: ikudrin
Differential Revision: https://reviews.llvm.org/D81570
This is a natural extension of the previous changes to use the Cursor
class independently in the standard and extended opcode paths, and in
turn allows delaying error handling until the entire line has been
printed in verbose mode, removing interleaved output in some cases.
Reviewed by: MaskRay, JDevlieghere
Differential Revision: https://reviews.llvm.org/D81562
Standard opcodes usually have ULEB128 arguments, so it is generally not
possible to recover from such errors. This patch causes the parser to
stop parsing the table in such situations.
Also don't emit the operands or add data to the table if there is an
error reading these opcodes.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D81470
Summary:
This makes the code easier to reason about, as it will behave the same
way regardless of whether there is any more data coming after the
presumed end of the prologue.
Reviewers: jhenderson, dblaikie, probinson, ikudrin
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77557
The verbose printing of unrecognised standard opcodes was broken in
multiple ways (additional blank lines, a closing parenthesis without
opening parenthesis and so on). This patch fixes it, and makes the
output more consistent with other opcodes.
The new line printing for debug line verbose output was inconsistent.
For new rows in the matrix, a blank line followed, whilst the
DW_LNS_copy opcode actually resulted in two blank lines. There was also
potential inconsistency in the blank lines at the end of the table. This
patch mostly resolves these issues - no blank lines appear in the output
except for a single line after the prologue and at table end to separate
it from any subsquent table, plus some instances after error messages.
Also add a unit test for verbose output to test the fine details of new
line placement and other aspects of verbose output.
Reviewed by: dblaikie
Differential Revision: https://reviews.llvm.org/D81102
Verbose and non-verbose parsing of .debug_line produced their output at
different points in the program. The most obvious impact of this was
that error messages were produced at different times, but it also
potentially reduced what clients could do by customising the stream or
warning/error handlers.
This change makes the two variants consistent by printing non-verbose
output inline, the same as verbose output.
Testing of the error messages has been modified to check the messages
always appear in the same location to illustrate the behaviour.
Reviewed by: JDevlieghere, dblaikie, MaskRay, labath
Differential Revision: https://reviews.llvm.org/D80989
Previously, if an extended opcode was truncated, it would manifest as an
"unexpected line op length error" which wasn't quite accurate. This
change checks for errors any time data is read whilst parsing an
extended opcode, and reports any errors detected.
Reviewed by: MaskRay, labath, aprantl
Differential Revision: https://reviews.llvm.org/D80797
Like non-verbose output, so that it is easy to recognize the `Line,Column,File,ISA,Discriminator` column values.
Reviewed By: JDevlieghere, jhenderson
Differential Revision: https://reviews.llvm.org/D80874
Update for upstream comments. Improve test by writing all the debug
info by hand.
Reviewers: dblaikie, jhenderson
Subscribers: hiraditya, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80168
This will ensure that nothing can ever start parsing data from a future
sequence and part-read data will be returned as 0 instead.
Reviewed by: aprantl, labath
Differential Revision: https://reviews.llvm.org/D80796
The patch changes dumping of unit_length and header_length fields in
headers in .debug_line sections so that they are printed as 16-digit hex
values if the contribution is in the DWARF64 format.
Differential Revision: https://reviews.llvm.org/D79997
Summary:
Without this we could silently accept an invalid prologue because the
default DataExtractor behavior is to return an empty string when
reaching the end of file. And empty string is also used to terminate
these lists.
This makes the parsing code slightly more complicated, but this
complexity will go away once the parser starts working with truncating
data extractors. The reason I am doing it this way is because without
this, the truncation would regress the quality of error messages (right
now, we produce bad error messages only near EOF, but truncation would
make everything behave as if it was near EOF).
Reviewers: dblaikie, probinson, jhenderson
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77555
Summary:
Without that we could be silently reading zeroes, as that's the default
DataExtractor behavior. The entire parse would still most likely fail,
but it would do that with a seemingly unrelated/nonsensical error
message.
Reviewers: dblaikie, probinson, jhenderson
Subscribers: hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77554
Summary:
The directory_count and file_name_count fields are (section 6.2.4 of
DWARF5 spec) supposed to be uleb128s, not bytes. This bug meant that it
was not possible to correctly parse headers with more than 128 files or
directories.
I've found this bug by code inspection, though the limit is so small
someone would have run into it for real sooner or later. I've verified
that the producer side handles many files correctly, and that we are
able to parse such files after this fix.
Reviewers: dblaikie, jhenderson
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76498
Summary:
1. FileLineInfoSpecifier::Default isn't the default for anything.
Rename to RawValue, which accurately reflects its role.
2. Most functions that take a part of a FileLineInfoSpecifier end up
constructing a full one later or plumb two values through. Make them
all just take a complete FileLineInfoSpecifier.
3. Printing basenames only was handled differently from all other
variants, make it parallel to all the other variants.
Reviewers: jhenderson
Subscribers: hiraditya, MaskRay, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76394
