These files satisfy all of the following:
- misc-include-cleaner indicates that these files do not need
Endian.h.
- They do not mention "endian" anywhere.
- They do not include any *.inc or *.def, which could need
llvm::support::endian.
Note that llvm::support::endianness has been renamed to
llvm::endianness while becoming an enum class as opposed to an enum.
This patch replaces llvm::support::{big,little,native} with
llvm::endianness::{big,little,native}.
This adds support for generating Chrome-tracing .json profile traces in
the LLD COFF driver.
Also add the necessary time scopes, so that the profile trace shows in
great detail which tasks are executed.
As an example, this is what we see when linking a Unreal Engine
executable:
We hit this in Chromium builds where the PDB file was just under 4GB,
but the stream directory was actually too large to be correctly
represented.
llvm-pdbutil would error about this in llvm::msf::validateSuperBlock,
but lld should not write such PDB files in the first place.
Differential revision: https://reviews.llvm.org/D144385
(Reapply after revert in e9ce1a588030d8d4004f5d7e443afe46245e9a92 due to
Fuchsia test failures. Removed changes in lib/ExecutionEngine/ other
than error categories, to be checked in more detail and reapplied
separately.)
Bulk remove many of the more trivial uses of ManagedStatic in the llvm
directory, either by defining a new getter function or, in many cases,
moving the static variable directly into the only function that uses it.
Differential Revision: https://reviews.llvm.org/D129120
Bulk remove many of the more trivial uses of ManagedStatic in the llvm
directory, either by defining a new getter function or, in many cases,
moving the static variable directly into the only function that uses it.
Differential Revision: https://reviews.llvm.org/D129120
Enable the pdbpagesize flag to allow linking of PDB files > 4GB.
Also includes a couple small fixes to change to uint64_t to support the
larger file sizes. I updated the max file size check in MSFBuilder.cpp
to take into account the page size.
Differential Revision: https://reviews.llvm.org/D115051
Most PDB fields on disk are 32-bit but describe the file in terms of MSF
blocks, which are 4 kiB by default.
So PDB files can be a bit larger than 4 GiB, and much larger if you create them
with a block size > 4 kiB.
This is a first (necessary, but by far not not sufficient) step towards
supporting such PDB files. Now we don't truncate in-memory file offsets (which
are in terms of bytes, not in terms of blocks).
No effective behavior change. lld-link will still error out if it were to
produce PDBs > 4 GiB.
Differential Revision: https://reviews.llvm.org/D109923
At most these use the StringRef/Twine wrappers and don't have any implicit uses of std::string.
Move the include down to any cpp implementation where std::string is actually used.
Handle PDB writing errors like any other error in LLD: emit an error and
continue. This allows the linker to print timing data and summary data
after linking, which can be helpful for finding PDB size problems. Also
report how large the file would have been.
Example output:
lld-link: error: Output data is larger than 4 GiB. File size would have been 6,937,108,480
lld-link: error: failed to write PDB file ./chrome.dll.pdb
Summary
--------------------------------------------------------------------------------
33282 Input OBJ files (expanded from all cmd-line inputs)
4 PDB type server dependencies
0 Precomp OBJ dependencies
33396931 Input type records
... snip ...
Input File Reading: 59756 ms ( 45.5%)
GC: 7500 ms ( 5.7%)
ICF: 3336 ms ( 2.5%)
Code Layout: 6329 ms ( 4.8%)
PDB Emission (Cumulative): 46192 ms ( 35.2%)
Add Objects: 27609 ms ( 21.0%)
Type Merging: 16740 ms ( 12.8%)
Symbol Merging: 10761 ms ( 8.2%)
Publics Stream Layout: 9383 ms ( 7.1%)
TPI Stream Layout: 1678 ms ( 1.3%)
Commit to Disk: 3461 ms ( 2.6%)
--------------------------------------------------
Total Link Time: 131244 ms (100.0%)
Differential Revision: https://reviews.llvm.org/D102713
Maybe there's a way to make them work, but until I've investigated
if tools can consume large PDBs, erroring out is better than slowly
and silently consuming all available ram due to internal invariants
being violated.
(Patch to make writing larger files work at
https://bugs.chromium.org/p/chromium/issues/detail?id=1179085#c25
but I haven't had time to check if windbg & co can consume these
large PDBs. llvm-pdbutil can't, but we can fix that one at least :) )
Differential Revision: https://reviews.llvm.org/D98788
No longer rely on an external tool to build the llvm component layout.
Instead, leverage the existing `add_llvm_componentlibrary` cmake function and
introduce `add_llvm_component_group` to accurately describe component behavior.
These function store extra properties in the created targets. These properties
are processed once all components are defined to resolve library dependencies
and produce the header expected by llvm-config.
Differential Revision: https://reviews.llvm.org/D90848
Summary:
Most libraries are defined in the lib/ directory but there are also a
few libraries defined in tools/ e.g. libLLVM, libLTO. I'm defining
"Component Libraries" as libraries defined in lib/ that may be included in
libLLVM.so. Explicitly marking the libraries in lib/ as component
libraries allows us to remove some fragile checks that attempt to
differentiate between lib/ libraries and tools/ libraires:
1. In tools/llvm-shlib, because
llvm_map_components_to_libnames(LIB_NAMES "all") returned a list of
all libraries defined in the whole project, there was custom code
needed to filter out libraries defined in tools/, none of which should
be included in libLLVM.so. This code assumed that any library
defined as static was from lib/ and everything else should be
excluded.
With this change, llvm_map_components_to_libnames(LIB_NAMES, "all")
only returns libraries that have been added to the LLVM_COMPONENT_LIBS
global cmake property, so this custom filtering logic can be removed.
Doing this also fixes the build with BUILD_SHARED_LIBS=ON
and LLVM_BUILD_LLVM_DYLIB=ON.
2. There was some code in llvm_add_library that assumed that
libraries defined in lib/ would not have LLVM_LINK_COMPONENTS or
ARG_LINK_COMPONENTS set. This is only true because libraries
defined lib lib/ use LLVMBuild.txt and don't set these values.
This code has been fixed now to check if the library has been
explicitly marked as a component library, which should now make it
easier to remove LLVMBuild at some point in the future.
I have tested this patch on Windows, MacOS and Linux with release builds
and the following combinations of CMake options:
- "" (No options)
- -DLLVM_BUILD_LLVM_DYLIB=ON
- -DLLVM_LINK_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_BUILD_LLVM_DYLIB=ON
- -DBUILD_SHARED_LIBS=ON -DLLVM_LINK_LLVM_DYLIB=ON
Reviewers: beanz, smeenai, compnerd, phosek
Reviewed By: beanz
Subscribers: wuzish, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, mgorny, mehdi_amini, sbc100, jgravelle-google, hiraditya, aheejin, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, steven_wu, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, dang, Jim, lenary, s.egerton, pzheng, sameer.abuasal, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70179
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Following D50807, and heading towards D50664, this intermediary change does the following:
1. Upgrade all custom Error types in llvm/trunk/lib/DebugInfo/ to use the new StringError behavior (D50807).
2. Implement std::is_error_code_enum and make_error_code() for DebugInfo error enumerations.
3. Rename GenericError -> PDBError (the file will be renamed in a subsequent commit)
4. Update custom error messages to follow the same formatting: (\w\s*)+\.
5. Keep generic "file not found" (ENOENT) errors as they are in PDB code. Previously, there used to be a custom enumeration for that purpose.
6. Remove a few extraneous LF in log() implementations. Printing LF is a responsability at a higher level, not at the error level.
Differential Revision: https://reviews.llvm.org/D51499
llvm-svn: 341228
The code to emit the pieces of the MSF file were actually in
PDBFileBuilder. Move this to MSFBuilder so that we can
theoretically emit an MSF without having a PDB file.
llvm-svn: 335789
There are two FPMs in an MSF file, the idea being that for
incremental updates you can write to the alternate one and then
atomically swap them on commit. LLVM defaulted to using FPM1
on the first commit, but this differs from Microsoft's behavior
which is to default to using FPM2 on the first commit. To
eliminate some byte-level file differences, this patch changes
LLVM's default to also be FPM2.
Additionally, LLVM was trying to be "smart" about marking FPM
pages allocated. In addition to marking every page belonging
to the alternate FPM as unallocated, LLVM also marked pages at
the end of the main FPM which were not needed as unallocated.
In order to match the behavior of Microsoft-generated PDBs, we
now always mark every FPM block as allocated, regardless of
whether it is in the main FPM or the alt FPM, and regardless of
whether or not it describes blocks which are actually in the file.
This has the side benefit of simplifying our code.
llvm-svn: 328812
We have some code to try to determine how many pieces an MSF
Free Page Map is split into, and this code had an off by one
error which would cause the calculation to be incorrect when
there were exactly 4096*k + 1 blocks in an MSF file.
Original investigation and patch outline by Colden Cullen.
Differential Revision: https://reviews.llvm.org/D41742
llvm-svn: 321880
The existing library assumed that a stream's length would never
change. This makes some things simpler, but it's not flexible
enough for what we need, especially for writable streams where
what you really want is for each call to write to actually append.
llvm-svn: 319070
The PDB reserves certain blocks for the FPM that describe which
blocks in the file are allocated and which are free. We weren't
filling that out at all, and in some cases we were even stomping
it with incorrect data. This patch writes a correct FPM.
Differential Revision: https://reviews.llvm.org/D36235
llvm-svn: 309896
Recently problems have been discovered in the way we write the FPM
(free page map). In order to fix this, we first need to establish
a baseline about what a correct FPM looks like using an MSVC
generated PDB, so that we can then make our own generated PDBs
match. And in order to do this, the dumper needs a mode where it
can dump an FPM so that we can write tests for it.
This patch adds a command to dump the FPM, as well as a test against
a known-good PDB.
llvm-svn: 309894
Previously MappedBlockStream owned its own BumpPtrAllocator that
it would allocate from when a read crossed a block boundary. This
way it could still return the user a contiguous buffer of the
requested size. However, It's not uncommon to open a stream, read
some stuff, close it, and then save the information for later.
After all, since the entire file is mapped into memory, the data
should always be available as long as the file is open.
Of course, the exception to this is when the data isn't *in* the
file, but rather in some buffer that we temporarily allocated to
present this contiguous view. And this buffer would get destroyed
as soon as the strema was closed.
The fix here is to force the user to specify the allocator, this
way it can provide an allocator that has whatever lifetime it
chooses.
Differential Revision: https://reviews.llvm.org/D33858
llvm-svn: 304623
It was using the number of blocks of the entire PDB file as the number
of blocks of each stream that was created. This was only an issue in
the readLongestContiguousChunk function, which was never called prior.
This bug surfaced when I updated an algorithm to use this function and
the algorithm broke.
llvm-svn: 303916
After several smaller patches to get most of the core improvements
finished up, this patch is a straight move and header fixup of
the source.
Differential Revision: https://reviews.llvm.org/D30266
llvm-svn: 296810
This was reverted because it was breaking some builds, and
because of incorrect error code usage. Since the CL was
large and contained many different things, I'm resubmitting
it in pieces.
This portion is NFC, and consists of:
1) Renaming classes to follow a consistent naming convention.
2) Fixing the const-ness of the interface methods.
3) Adding detailed doxygen comments.
4) Fixing a few instances of passing `const BinaryStream& X`. These
are now passed as `BinaryStreamRef X`.
llvm-svn: 296394
r296215, "[PDB] General improvements to Stream library."
r296217, "Disable BinaryStreamTest.StreamReaderObject temporarily."
r296220, "Re-enable BinaryStreamTest.StreamReaderObject."
r296244, "[PDB] Disable some tests that are breaking bots."
r296249, "Add static_cast to silence -Wc++11-narrowing."
std::errc::no_buffer_space should be used for OS-oriented errors for socket transmission.
(Seek discussions around llvm/xray.)
I could substitute s/no_buffer_space/others/g, but I revert whole them ATM.
Could we define and use LLVM errors there?
llvm-svn: 296258
This adds various new functionality and cleanup surrounding the
use of the Stream library. Major changes include:
* Renaming of all classes for more consistency / meaningfulness
* Addition of some new methods for reading multiple values at once.
* Full suite of unit tests for reader / writer functionality.
* Full set of doxygen comments for all classes.
* Streams now store their own endianness.
* Fixed some bugs in a few of the classes that were discovered
by the unit tests.
llvm-svn: 296215
This is part of a larger effort to get the Stream code moved
up to Support. I don't want to do it in one large patch, in
part because the changes are so big that it will treat everything
as file deletions and add, losing history in the process.
Aside from that though, it's just a good idea in general to
make small changes.
So this change only changes the names of the Stream related
source files, and applies necessary source fix ups.
llvm-svn: 296211
Summary: The code we use to read PDBs assumed that streams we ask it to read exist, and would read memory outside a vector and crash if this wasn't the case. This would, for example, cause llvm-pdbdump to crash on PDBs generated by lld. This patch handles such cases more gracefully: the PDB reading code in LLVM now reports errors when asked to get a stream that is not present, and llvm-pdbdump will report missing streams and continue processing streams that are present.
Reviewers: ruiu, zturner
Subscribers: thakis, amccarth
Differential Revision: https://reviews.llvm.org/D27325
llvm-svn: 288722
Using a pattern similar to that of YamlIO, this allows
us to have a single codepath for translating codeview
records to and from serialized byte streams. The
current patch only hooks this up to the reading of
CodeView type records. A subsequent patch will hook
it up for writing of CodeView type records, and then a
third patch will hook up the reading and writing of
CodeView symbols.
Differential Revision: https://reviews.llvm.org/D26040
llvm-svn: 285836
This was all using ArrayRef<>s before which presents a problem
when you want to serialize to or deserialize from an actual
PDB stream. An ArrayRef<> is really just a special case of
what can be handled with StreamInterface though (e.g. by using
a ByteStream), so changing this to use StreamInterface allows
us to plug in a PDB stream and get all the record serialization
and deserialization for free on a MappedBlockStream.
Subsequent patches will try to remove TypeTableBuilder and
TypeRecordBuilder in favor of class that operate on
Streams as well, which should allow us to completely merge
the reading and writing codepaths for both types and symbols.
Differential Revision: https://reviews.llvm.org/D25831
llvm-svn: 284762
When we create a PDB file using PDBFileBuilder, the information
in the superblock, such as the size of the resulting file, is not
available.
Previously, PDBFileBuilder::initialize took a superblock assuming
that all the members of the struct are correct. That is useful when
you want to restore the exact information from a YAML file, but
that's probably the only use case in which that is useful.
When we are creating a PDB file on the fly, we have to backfill the
members.
This patch redefines PDBFileBuilder::initialize to take only a
block size. Now all the other members are left as default values,
so that they'll be updated when commit() is called.
Differential Revision: https://reviews.llvm.org/D25108
llvm-svn: 282944
This completes being able to write all the interesting
values of a PDB TPI stream.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D24370
llvm-svn: 281555
