This commit adds section start and stop symbol handling to ELF/aarch64, and
fixes the section symbol prefixes (using `__start_` and `__stop_`, rather than
`__start` and `__end`). It also adds a testcase for handling of these symbols.
This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
These files satisfy all of the following:
- misc-include-cleaner indicates that these files do not need
Endian.h.
- They do not mention "endian" anywhere.
- They do not include any *.inc or *.def, which could need
llvm::support::endian.
The LinkGraph that is passed into the ELFJITLinker_x86_64 constructor is handed
off to the JITLinker base class, so can't be used in the constructor body. This
commit adds a getGraph method to JITLinker, and updates ELFJITLinker_x86_64 to
use that.
This allows JITLinkerBase implementations to check whether default passes
should be added. The ELF_x86_64 backend is updated to check this predicate
before installing the getOrCreateGOTSymbol pass.
This is an alternative solution to https://reviews.llvm.org/D158909.
D149522 introduced target features to LinkGraph. However, to avoid a
public dependency on MC, the features were stored in a std::vector
instead of using SubtargetFeatures directly.
Since SubtargetFeatures was moved from MC to TargetParser (D150549), we
can now use it directly to store the features. This patch implements
that and removes the (private) dependency on MC.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D153749
This patch adds SubtargetFeatures to LinkGraph. Similar to Triple, some
targets might use this information while linking.
One example, and the reason this patch was written, is linker relaxation
on RISC-V: different relaxations are possible depending on if the C
extension is enabled.
Note that the features are stored as `std::vector<std::string>` to prevent a
public dependency on MC. There is still a private dependency to be able to
convert SubtargetFeatures to a vector.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D149522
Adds support for the R_X86_64_GOTPC32 relocation, which is a 32-bit delta to
the global offset table.
Since the delta to the GOT doesn't actually require any GOT entries to exist
this commit adds an extra fallback path to the getOrCreateGOTSymbol function:
If the symbol is in the extenal symbols list but no entry exists then the
symbol is turned into an absolute symbol pointing to an arbitrary address in
the current graph's allocation (accessing this address via the symbol would be
illegal, but any access should have triggered creation of a GOT entry which
would prevent this fallback path from being taken in the first place).
This commit also updates the llvm-jitlink tool to scrape the addresses of the
absolute symbols in the graph so that the testcase can see the now-absolute
_GLOBAL_OFFSET_TABLE_ symbol.
This comment was probably mangled when the generic ELFLinkGraphBuilder was
written from the original x86-64 specific version. Regardless of its origins,
it doesn't make any sense now.
This commit adds support for 32 bit absolute and pc relative relocations in
ELF/i386 objects, along with simple regression tests.
Reviewed By: sgraenitz, lhames
Differential Revision: https://reviews.llvm.org/D135523
Logs enum name of unsupported relocation type. This also changes elf/x86 to use common util function (getELFRelocationTypeName) inside llvm object module.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D127715
Adds support for pointer encodings commonly used in large/static models,
including non-pcrel, sdata/udata8, indirect, and omit.
Also refactors pointer-encoding handling to consolidate error generation inside
common functions, rather than callees of those functions.
With 229d576b31f4071ab68c85ac4fabb78cfa502b04 the class EHFrameSplitter was renamed to DWARFRecordSectionSplitter. This change merely moves it to it's own .cpp/.h file
Differential Revision: https://reviews.llvm.org/D121721
EHFrameSplitter does the exact same work to split up the eh_frame as it would need for any section that follows the DWARF record, therefore this patch just changes the name of it to DWARFRecordSectionSplitter to be more general.
Differential Revision: https://reviews.llvm.org/D121486
ELF object files can contain duplicated sections (thus section symbols
as well), espeically when comdats/section groups are present. This patch
adds support for generating LinkGraph from object files that have
duplicated section names. This is the first step to properly model
comdats/section groups.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D114753
This re-applies 133f86e95492b2a00b944e070878424cfa73f87c, which was reverted in
c5965a411c635106a47738b8d2e24db822b7416f while I investigated bot failures.
The original failure contained an arithmetic conversion think-o (on line 419 of
EHFrameSupport.cpp) that could cause failures on 32-bit platforms. The issue
should be fixed in this patch.
R_X86_64_PLT32 explicitly represents the '-4' PC-adjustment in the relocation's
addend, but JITLink's x86_64::Branch32PCRel includes the PC-adjustment
implicitly. We have been zeroing the addend to account for the difference, but
this breaks for branches to non-zero offsets past labels. This patch updates the
relocation parsing code to unconditionally adjust the offset by '+4' instead.
For branches directly to labels the result is still 0, for branches to offsets
past labels the result is the correct addend for x86_64::Branch32PCRel.
This lifts the global offset table and procedure linkage table builders out of
ELF_x86_64.h and into x86_64.h, renaming them with generic names
x86_64::GOTTableBuilder and x86_64::PLTTableBuilder. MachO_x86_64.cpp is updated
to use these classes instead of the older PerGraphGOTAndStubsBuilder tool.
Moves visitEdge into the TableManager derivatives, replacing the fixEdgeKind
methods in those classes. The visitEdge method takes on responsibility for
updating the edge target, as well as its kind.
This patch add a TableManager which reponsible for fixing edges that need entries to reference the target symbol and constructing such entries.
In the past, the PerGraphGOTAndPLTStubsBuilder pass was used to build GOT and PLT entry, and the PerGraphTLSInfoEntryBuilder pass was used to build TLSInfo entry. By generalizing the behavior of building entry, I added a TableManager which could be reused when built GOT, PLT and TLSInfo entries.
If this patch makes sense and can be accepted, I will apply the TableManager to other targets(MachO_x86_64, MachO_arm64, ELF_riscv), and delete the file PerGraphGOTAndPLTStubsBuilder.h
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D110383
Adds explicit narrowing casts to JITLinkMemoryManager.cpp.
Honors -slab-address option in llvm-jitlink.cpp, which was accidentally
dropped in the refactor.
This effectively reverts commit 6641d29b70993bce6dbd7e0e0f1040753d38842f.
This commit substantially refactors the JITLinkMemoryManager API to: (1) add
asynchronous versions of key operations, (2) give memory manager implementations
full control over link graph address layout, (3) enable more efficient tracking
of allocated memory, and (4) support "allocation actions" and finalize-lifetime
memory.
Together these changes provide a more usable API, and enable more powerful and
efficient memory manager implementations.
To support these changes the JITLinkMemoryManager::Allocation inner class has
been split into two new classes: InFlightAllocation, and FinalizedAllocation.
The allocate method returns an InFlightAllocation that tracks memory (both
working and executor memory) prior to finalization. The finalize method returns
a FinalizedAllocation object, and the InFlightAllocation is discarded. Breaking
Allocation into InFlightAllocation and FinalizedAllocation allows
InFlightAllocation subclassses to be written more naturally, and FinalizedAlloc
to be implemented and used efficiently (see (3) below).
In addition to the memory manager changes this commit also introduces a new
MemProt type to represent memory protections (MemProt replaces use of
sys::Memory::ProtectionFlags in JITLink), and a new MemDeallocPolicy type that
can be used to indicate when a section should be deallocated (see (4) below).
Plugin/pass writers who were using sys::Memory::ProtectionFlags will have to
switch to MemProt -- this should be straightworward. Clients with out-of-tree
memory managers will need to update their implementations. Clients using
in-tree memory managers should mostly be able to ignore it.
Major features:
(1) More asynchrony:
The allocate and deallocate methods are now asynchronous by default, with
synchronous convenience wrappers supplied. The asynchronous versions allow
clients (including JITLink) to request and deallocate memory without blocking.
(2) Improved control over graph address layout:
Instead of a SegmentRequestMap, JITLinkMemoryManager::allocate now takes a
reference to the LinkGraph to be allocated. The memory manager is responsible
for calculating the memory requirements for the graph, and laying out the graph
(setting working and executor memory addresses) within the allocated memory.
This gives memory managers full control over JIT'd memory layout. For clients
that don't need or want this degree of control the new "BasicLayout" utility can
be used to get a segment-based view of the graph, similar to the one provided by
SegmentRequestMap. Once segment addresses are assigned the BasicLayout::apply
method can be used to automatically lay out the graph.
(3) Efficient tracking of allocated memory.
The FinalizedAlloc type is a wrapper for an ExecutorAddr and requires only
64-bits to store in the controller. The meaning of the address held by the
FinalizedAlloc is left up to the memory manager implementation, but the
FinalizedAlloc type enforces a requirement that deallocate be called on any
non-default values prior to destruction. The deallocate method takes a
vector<FinalizedAlloc>, allowing for bulk deallocation of many allocations in a
single call.
Memory manager implementations will typically store the address of some
allocation metadata in the executor in the FinalizedAlloc, as holding this
metadata in the executor is often cheaper and may allow for clean deallocation
even in failure cases where the connection with the controller is lost.
(4) Support for "allocation actions" and finalize-lifetime memory.
Allocation actions are pairs (finalize_act, deallocate_act) of JITTargetAddress
triples (fn, arg_buffer_addr, arg_buffer_size), that can be attached to a
finalize request. At finalization time, after memory protections have been
applied, each of the "finalize_act" elements will be called in order (skipping
any elements whose fn value is zero) as
((char*(*)(const char *, size_t))fn)((const char *)arg_buffer_addr,
(size_t)arg_buffer_size);
At deallocation time the deallocate elements will be run in reverse order (again
skipping any elements where fn is zero).
The returned char * should be null to indicate success, or a non-null
heap-allocated string error message to indicate failure.
These actions allow finalization and deallocation to be extended to include
operations like registering and deregistering eh-frames, TLS sections,
initializer and deinitializers, and language metadata sections. Previously these
operations required separate callWrapper invocations. Compared to callWrapper
invocations, actions require no extra IPC/RPC, reducing costs and eliminating
a potential source of errors.
Finalize lifetime memory can be used to support finalize actions: Sections with
finalize lifetime should be destroyed by memory managers immediately after
finalization actions have been run. Finalize memory can be used to support
finalize actions (e.g. with extra-metadata, or synthesized finalize actions)
without incurring permanent memory overhead.
This patch add a TableManager which reponsible for fixing edges that need entries to reference the target symbol and constructing such entries.
In the past, the PerGraphGOTAndPLTStubsBuilder pass was used to build GOT and PLT entry, and the PerGraphTLSInfoEntryBuilder pass was used to build TLSInfo entry. By generalizing the behavior of building entry, I added a TableManager which could be reused when built GOT, PLT and TLSInfo entries.
If this patch makes sense and can be accepted, I will apply the TableManager to other targets(MachO_x86_64, MachO_arm64, ELF_riscv), and delete the file PerGraphGOTAndPLTStubsBuilder.h
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D110383
Following D109516, this patch re-uses the new helper function for ELF relocation traversal in the x86-64 backend.
Reviewed By: StephenFan
Differential Revision: https://reviews.llvm.org/D109520
This patch use the same way as the https://reviews.llvm.org/rGfe1fa43f16beac1506a2e73a9f7b3c81179744eb to handle the thread local variable.
It allocates 2 * pointerSize space in GOT to represent the thread key and data address. Instead of using the _tls_get_addr function, I customed a function __orc_rt_elfnix_tls_get_addr to get the address of thread local varible. Currently, this is a wip patch, only one TLS relocation R_X86_64_TLSGD is supported and I need to add the corresponding test cases.
To allocate the TLS descriptor in GOT, I need to get the edge kind information in PerGraphGOTAndPLTStubBuilder, So I add a `Edge::Kind K` argument in some functions in PerGraphGOTAndPLTStubBuilder.h. If it is not suitable, I can think further to solve this problem.
Differential Revision: https://reviews.llvm.org/D109293
This patch supported the R_X86_64_32S relocation and add the Pointer32Signed generic edge kind.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D108446
This patch optimize the GOTPCRELX Reloations, which is described in X86-64 psabi chapter B.2. And Not all optimization of this chapter is implemented.
1. Convert call and jmp has been implemented
2. Convert mov, but the optimization that when the symbol is defined in the lower 32-bit address space, memory operand in `mov` can be convertted into immediate operand has not been implemented.
3. Conver Test and Binop has not been implemented.
The new test file named ELF_got_plt_optimizations.s has been added, and I moved some test cases about optimization of got/plt from ELF_x86_64_small_pic_relocations.s to the new test file.
By referencing the lld, so, the optimization `Convert call and jmp` is not same as what psabi says, and I have explained it in the comment.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D108280
This patch unify optimizeELF_x86_64_GOTAndStubs and optimizeMachO_x86_64_GOTAndStubs into a pure optimize_x86_64_GOTAndStubs
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D108025
This patch uses a switch statement to map the ELF_x86_64's edge kind to generic edge kind, and merge the ELF_x86_64 's applyFixup function to the x86_64 's applyFixup function. Some edge kinds were not have corresponding generic edge kinds, so I added three generic edge kinds asa follows:
1. RequestGOTAndTransformToDelta64, which is similar to RequestGOTAndTransformToDelta32.
2. GOTDelta64. This generic kind is similar to Delta64, except the GOTDelta64 computes the delta relative to GOTSymbol
3. RequestGOTAndTransformToGOTDelta64. This edge kind was used to deal with ELF_x86_64's GOT64 edge kind, it request the fixGOTEdge function to change the target to GOT entry, and set the edge kind to generic edge kind GOTDelta64.
These added generic edge kinds may named haphazardly, or can't express its meaning well.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D107967
ELFLinkGraphBuilder<ELFT> will hold generic parsing and LinkGraph-building code
that can be shared between JITLink ELF backends for different architectures.
For now it's just a stub. The plan is to incrementally move functionality down
from ELFLinkGraphBuilder_x86_64 into the new template.
This patch introduces new operations on jitlink::Blocks: setMutableContent,
getMutableContent and getAlreadyMutableContent. The setMutableContent method
will set the block content data and size members and flag the content as
mutable. The getMutableContent method will return a mutable copy of the existing
content value, auto-allocating and populating a new mutable copy if the existing
content is marked immutable. The getAlreadyMutableMethod asserts that the
existing content is already mutable and returns it.
setMutableContent should be used when updating the block with totally new
content backed by mutable memory. It can be used to change the size of the
block. The argument value should *not* be shared with any other block.
getMutableContent should be used when clients want to modify the existing
content and are unsure whether it is mutable yet.
getAlreadyMutableContent should be used when clients want to modify the existing
content and know from context that it must already be immutable.
These operations reduce copy-modify-update boilerplate and unnecessary copies
introduced when clients couldn't me sure whether the existing content was
mutable or not.
Adds utilities for creating anonymous pointers and jump stubs to x86_64.h. These
are used by the GOT and Stubs builder, but may also be used by pass writers who
want to create pointer stubs for indirection.
This patch also switches the underlying type for LinkGraph content from
StringRef to ArrayRef<char>. This avoids any confusion when working with buffers
that contain null bytes in the middle like, for example, a newly added null
pointer content array. ;)
