Switch the primary implementation of EPC lookupSymbols to be async,
keeping a synchronous wrapper for compatibility. Use the new async
implementation inside EPCDynamicLibrarySearchGenerator to work
working towards a fully async search generator.
Provide an asynchronous lookup API for EPCGenericDylibManager and adopt
that from the SimpleRemoteEPC. This enables an end-to-end async
EPCDynamicLibrarySearchGenerator. Note: currently we keep the current
per-dlhandle lookup model, but a future improvement could do a single
async call for a given lookup operation.
This migrates the dylib manager lookup and related APIs to replace
ExecutorAddress with ExecutorSymbolDef so that in the future we can
model JITSymbolFlags for these symbols. The current change should be NFC
as we are only setting the Exported symbol flag.
Add pointer write functionality to MemoryAccess that is needed for implementing redirection manager. It also refactors the code a bit by introducing InProcessMemoryAccess class.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D157378
By using bootstrap symbols to communicate these addresseses, rather than dlsym
lookups, we no longer need them to be exported from the main executable. On ELF,
where symbols aren't exported from the main executable by default, this
eliminates a common source of missing symbol errors and allows for smaller
executables (if exports from the main executable aren't otherwise needed and
can be removed).
ExecutorAddr was introduced in b8e5f918166 as an eventual replacement for
JITTargetAddress. ExecutorSymbolDef is introduced in this patch as a
replacement for JITEvaluatedSymbol: ExecutorSymbolDef is an (ExecutorAddr,
JITSymbolFlags) pair, where JITEvaluatedSymbol was a (JITTargetAddress,
JITSymbolFlags) pair.
A number of APIs had already migrated from JITTargetAddress to ExecutorAddr,
but many of ORC's internals were still using the older type. This patch aims
to address that.
Some public APIs are affected as well. If you need to migrate your APIs you can
use the following operations:
* ExecutorAddr::toPtr replaces jitTargetAddressToPointer and
jitTargetAddressToFunction.
* ExecutorAddr::fromPtr replace pointerToJITTargetAddress.
* ExecutorAddr(JITTargetAddress) creates an ExecutorAddr value from a
JITTargetAddress.
* ExecutorAddr::getValue() creates a JITTargetAddress value from an
ExecutorAddr.
JITTargetAddress and JITEvaluatedSymbol will remain in JITSymbol.h for now, but
the aim will be to eventually deprecate and remove these types (probably when
MCJIT and RuntimeDyld are deprecated).
The forwarding header is left in place because of its use in
`polly/lib/External/isl/interface/extract_interface.cc`, but I have
added a GCC warning about the fact it is deprecated, because it is used
in `isl` from where it is included by Polly.
SelfExecutorProcessControl no longer requires that handles passed to
lookupSymbols be ones that were previously returned from loadDylib. This brings
SelfExecutorPRocessControl into alignment with SimpleRemoteEPC, which was
updated in 6613f4aff85.
Updates tpctypes::DylibHandle to be an ExecutorAddr (rather than a uint64_t),
and SimpleExecutorDylibManager to hold and return raw OS handle values (as
ExecutorAddrs) rather than index values into a map of DynamicLibrary instances.
This will allow clients to use EPCGenericDylibManager in contexts where the
existing DynamicLibrary interface is too limited to be used. (e.g. to look up
JIT symbols in a dylib that was loaded with RTLD_LOCAL).
Introduces COFFVCRuntimeBootstrapper that loads/initialize vc runtime libraries. In COFF, we *must* jit-link vc runtime libraries as COFF relocation types have no proper way to deal with out-of-reach data symbols ragardless of linking mode. (even dynamic version msvcrt.lib have tons of static data symbols that must be jit-linked) This class tries to load vc runtime library files from msvc installations with an option to override the path.
There are some complications when dealing with static version of vc runtimes. First, they need static initializers to be ran that requires COFFPlatform support but orc runtime will not be usable before vc runtimes are fully initialized. (as orc runtime will use msvc stl libraries) COFFPlatform that will be introduced in a following up patch will collect static initializers and run them manually in host before boostrapping itself. So, the user will have to do the following.
1. Create COFFPlatform that addes static initializer collecting passes.
2. LoadVCRuntime
3. InitializeVCRuntime
4. COFFPlatform.bootstrap()
Second, the internal crt initialization function had to be reimplemented in orc side. There are other ways of doing this, but this is the simplest implementation that makes platform fully responsible for static initializer. The complication comes from the fact that crt initialization functions (such as acrt_initialize or dllmain_crt_process_attach) actually run all static initializers by traversing from `__xi_a` symbol to `__xi_z`. This requires symbols to be contiguously allocated in sections alphabetically sorted in memory, which is not possible right now and not practical in jit setting. We might ignore emission of `__xi_a` and `__xi_z` symbol and allocate them ourselves, but we have to take extra care after orc runtime boostrap has been done -- as that point orc runtime should be the one running the static initializers.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D130456
This type has been moved up into the llvm::orc::shared namespace.
This type was originally put in the detail:: namespace on the assumption that
few (if any) LLVM source files would need to use it. In practice it has been
needed in many places, and will continue to be needed until/unless
OrcTargetProcess is fully merged into the ORC runtime.
This re-applies e32b1eee6aab52e2b7b75ee15e506b3e7dd30e68, which was reverted in
20675d8f7dab293172266fdde426c2173b5b3997 due to broken unit tests. This patch
includes fixes for the tests.
SPSExecutorAddr will now be serializable to/from ExecutorAddr, rather than
uint64_t. This improves type safety when working with serialized addresses.
Also updates the SupportFunctionCall to use an ExecutorAddrRange (rather than
a separate ExecutorAddr addr and uint64_t size field), and updates the
tpctypes::*Write data structures to use ExecutorAddr rather than
JITTargetAddress.
f3411616896 added a task dispatcher for async handlers, but didn't add a
TaskDispatcher::shutdown call to SelfExecutorProcessControl or SimpleRemoteEPC.
This patch adds the missing call, which ensures that we don't destroy the
dispatcher while tasks are still running.
This should fix the use-after-free crash seen in
https://lab.llvm.org/buildbot/#/builders/5/builds/13063
Adds explicit narrowing casts to JITLinkMemoryManager.cpp.
Honors -slab-address option in llvm-jitlink.cpp, which was accidentally
dropped in the refactor.
This effectively reverts commit 6641d29b70993bce6dbd7e0e0f1040753d38842f.
This commit substantially refactors the JITLinkMemoryManager API to: (1) add
asynchronous versions of key operations, (2) give memory manager implementations
full control over link graph address layout, (3) enable more efficient tracking
of allocated memory, and (4) support "allocation actions" and finalize-lifetime
memory.
Together these changes provide a more usable API, and enable more powerful and
efficient memory manager implementations.
To support these changes the JITLinkMemoryManager::Allocation inner class has
been split into two new classes: InFlightAllocation, and FinalizedAllocation.
The allocate method returns an InFlightAllocation that tracks memory (both
working and executor memory) prior to finalization. The finalize method returns
a FinalizedAllocation object, and the InFlightAllocation is discarded. Breaking
Allocation into InFlightAllocation and FinalizedAllocation allows
InFlightAllocation subclassses to be written more naturally, and FinalizedAlloc
to be implemented and used efficiently (see (3) below).
In addition to the memory manager changes this commit also introduces a new
MemProt type to represent memory protections (MemProt replaces use of
sys::Memory::ProtectionFlags in JITLink), and a new MemDeallocPolicy type that
can be used to indicate when a section should be deallocated (see (4) below).
Plugin/pass writers who were using sys::Memory::ProtectionFlags will have to
switch to MemProt -- this should be straightworward. Clients with out-of-tree
memory managers will need to update their implementations. Clients using
in-tree memory managers should mostly be able to ignore it.
Major features:
(1) More asynchrony:
The allocate and deallocate methods are now asynchronous by default, with
synchronous convenience wrappers supplied. The asynchronous versions allow
clients (including JITLink) to request and deallocate memory without blocking.
(2) Improved control over graph address layout:
Instead of a SegmentRequestMap, JITLinkMemoryManager::allocate now takes a
reference to the LinkGraph to be allocated. The memory manager is responsible
for calculating the memory requirements for the graph, and laying out the graph
(setting working and executor memory addresses) within the allocated memory.
This gives memory managers full control over JIT'd memory layout. For clients
that don't need or want this degree of control the new "BasicLayout" utility can
be used to get a segment-based view of the graph, similar to the one provided by
SegmentRequestMap. Once segment addresses are assigned the BasicLayout::apply
method can be used to automatically lay out the graph.
(3) Efficient tracking of allocated memory.
The FinalizedAlloc type is a wrapper for an ExecutorAddr and requires only
64-bits to store in the controller. The meaning of the address held by the
FinalizedAlloc is left up to the memory manager implementation, but the
FinalizedAlloc type enforces a requirement that deallocate be called on any
non-default values prior to destruction. The deallocate method takes a
vector<FinalizedAlloc>, allowing for bulk deallocation of many allocations in a
single call.
Memory manager implementations will typically store the address of some
allocation metadata in the executor in the FinalizedAlloc, as holding this
metadata in the executor is often cheaper and may allow for clean deallocation
even in failure cases where the connection with the controller is lost.
(4) Support for "allocation actions" and finalize-lifetime memory.
Allocation actions are pairs (finalize_act, deallocate_act) of JITTargetAddress
triples (fn, arg_buffer_addr, arg_buffer_size), that can be attached to a
finalize request. At finalization time, after memory protections have been
applied, each of the "finalize_act" elements will be called in order (skipping
any elements whose fn value is zero) as
((char*(*)(const char *, size_t))fn)((const char *)arg_buffer_addr,
(size_t)arg_buffer_size);
At deallocation time the deallocate elements will be run in reverse order (again
skipping any elements where fn is zero).
The returned char * should be null to indicate success, or a non-null
heap-allocated string error message to indicate failure.
These actions allow finalization and deallocation to be extended to include
operations like registering and deregistering eh-frames, TLS sections,
initializer and deinitializers, and language metadata sections. Previously these
operations required separate callWrapper invocations. Compared to callWrapper
invocations, actions require no extra IPC/RPC, reducing costs and eliminating
a potential source of errors.
Finalize lifetime memory can be used to support finalize actions: Sections with
finalize lifetime should be destroyed by memory managers immediately after
finalization actions have been run. Finalize memory can be used to support
finalize actions (e.g. with extra-metadata, or synthesized finalize actions)
without incurring permanent memory overhead.
The callWrapperAsync and callSPSWrapperAsync methods take a handler object
that is run on the return value of the call when it is ready. The new RunPolicy
parameters allow clients to control how these handlers are run. If no policy is
specified then the handler will be packaged as a GenericNamedTask and dispatched
using the ExecutorProcessControl's TaskDispatch member. Callers can use the
ExecutorProcessControl::RunInPlace policy to cause the handler to be run
directly instead, which may be preferrable for simple handlers, or they can
write their own policy object (e.g. to dispatch as some other kind of Task,
rather than GenericNamedTask).
ExecutorProcessControl objects will now have a TaskDispatcher member which
should be used to dispatch work (in particular, handling incoming packets in
the implementation of remote EPC implementations like SimpleRemoteEPC).
The GenericNamedTask template can be used to wrap function objects that are
callable as 'void()' (along with an optional name to describe the task).
The makeGenericNamedTask functions can be used to create GenericNamedTask
instances without having to name the function object type.
In a future patch ExecutionSession will be updated to use the
ExecutorProcessControl's dispatcher, instead of its DispatchTaskFunction.
The callee address is now the first parameter and the 'SendResult' function
the second. This change improves consistentency with the non-async functions
where the callee is the first address and the return value the second.
Removing the 'ess' suffix improves the ergonomics without sacrificing clarity.
Since this class is likely to be used more frequently in the future it's worth
some short term pain to fix this now.
This prevents the async methods (which shoud be overridden by subclasses) from
hiding the blocking helper methods, avoiding a lot of 'using MemoryAccess::...'
boilerplate.
Wrapper function call and dispatch handler helpers are moved to
ExecutionSession, and existing EPC-based tools are re-written to take an
ExecutionSession argument instead.
Requiring an ExecutorProcessControl instance simplifies existing EPC based
utilities (which only need to take an ES now), and should encourage more
utilities to use the EPC interface. It also simplifies process termination,
since the session can automatically call ExecutorProcessControl::disconnect
(previously this had to be done manually, and carefully ordered with the
rest of JIT tear-down to work correctly).
Adds support for MachO static initializers/deinitializers and eh-frame
registration via the ORC runtime.
This commit introduces cooperative support code into the ORC runtime and ORC
LLVM libraries (especially the MachOPlatform class) to support macho runtime
features for JIT'd code. This commit introduces support for static
initializers, static destructors (via cxa_atexit interposition), and eh-frame
registration. Near-future commits will add support for MachO native
thread-local variables, and language runtime registration (e.g. for Objective-C
and Swift).
The llvm-jitlink tool is updated to use the ORC runtime where available, and
regression tests for the new MachOPlatform support are added to compiler-rt.
Notable changes on the ORC runtime side:
1. The new macho_platform.h / macho_platform.cpp files contain the bulk of the
runtime-side support. This includes eh-frame registration; jit versions of
dlopen, dlsym, and dlclose; a cxa_atexit interpose to record static destructors,
and an '__orc_rt_macho_run_program' function that defines running a JIT'd MachO
program in terms of the jit- dlopen/dlsym/dlclose functions.
2. Replaces JITTargetAddress (and casting operations) with ExecutorAddress
(copied from LLVM) to improve type-safety of address management.
3. Adds serialization support for ExecutorAddress and unordered_map types to
the runtime-side Simple Packed Serialization code.
4. Adds orc-runtime regression tests to ensure that static initializers and
cxa-atexit interposes work as expected.
Notable changes on the LLVM side:
1. The MachOPlatform class is updated to:
1.1. Load the ORC runtime into the ExecutionSession.
1.2. Set up standard aliases for macho-specific runtime functions. E.g.
___cxa_atexit -> ___orc_rt_macho_cxa_atexit.
1.3. Install the MachOPlatformPlugin to scrape LinkGraphs for information
needed to support MachO features (e.g. eh-frames, mod-inits), and
communicate this information to the runtime.
1.4. Provide entry-points that the runtime can call to request initializers,
perform symbol lookup, and request deinitialiers (the latter is
implemented as an empty placeholder as macho object deinits are rarely
used).
1.5. Create a MachO header object for each JITDylib (defining the __mh_header
and __dso_handle symbols).
2. The llvm-jitlink tool (and llvm-jitlink-executor) are updated to use the
runtime when available.
3. A `lookupInitSymbolsAsync` method is added to the Platform base class. This
can be used to issue an async lookup for initializer symbols. The existing
`lookupInitSymbols` method is retained (the GenericIRPlatform code is still
using it), but is deprecated and will be removed soon.
4. JIT-dispatch support code is added to ExecutorProcessControl.
The JIT-dispatch system allows handlers in the JIT process to be associated with
'tag' symbols in the executor, and allows the executor to make remote procedure
calls back to the JIT process (via __orc_rt_jit_dispatch) using those tags.
The primary use case is ORC runtime code that needs to call bakc to handlers in
orc::Platform subclasses. E.g. __orc_rt_macho_jit_dlopen calling back to
MachOPlatform::rt_getInitializers using __orc_rt_macho_get_initializers_tag.
(The system is generic however, and could be used by non-runtime code).
The new ExecutorProcessControl::JITDispatchInfo struct provides the address
(in the executor) of the jit-dispatch function and a jit-dispatch context
object, and implementations of the dispatch function are added to
SelfExecutorProcessControl and OrcRPCExecutorProcessControl.
5. OrcRPCTPCServer is updated to support JIT-dispatch calls over ORC-RPC.
6. Serialization support for StringMap is added to the LLVM-side Simple Packed
Serialization code.
7. A JITLink::allocateBuffer operation is introduced to allocate writable memory
attached to the graph. This is used by the MachO header synthesis code, and will
be generically useful for other clients who want to create new graph content
from scratch.
Adds support for both synchronous and asynchronous calls to wrapper functions
using SPS (Simple Packed Serialization). Also adds support for wrapping
functions on the JIT side in SPS-based wrappers that can be called from the
executor.
These new methods simplify calls between the JIT and Executor, and will be used
in upcoming ORC runtime patches to enable communication between ORC and the
runtime.
This is a first step towards consistently using the term 'executor' for the
process that executes JIT'd code. I've opted for 'executor' as the preferred
term over 'target' as target is already heavily overloaded ("the target
machine for the executor" is much clearer than "the target machine for the
target").
