This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
This finishes the work of replacing OperandMatchResultTy with
ParseStatus, started in D154101.
As a drive-by change, rename some RegNo variables to just Reg
(a leftover from the days when RegNo had 'unsigned' type).
Conventionally, parsing methods return false on success and true on
error. However, directive parsing methods need a third state: the
directive is not target specific. AsmParser::parseStatement detected
this case by using a fragile heuristic: if the target parser did not
consume any tokens, the directive is assumed to be not target-specific.
Some targets fail to follow the convention: they return success after
emitting an error or do not consume the entire line and return failure
on successful parsing. This was partially worked around by checking for
pending errors in parseStatement.
This patch tries to improve the situation by introducing parseDirective
method that returns ParseStatus -- three-state class. The new method
should eventually replace the old one returning bool.
ParseStatus is intentionally implicitly constructible from bool to allow
uses like `return Error(Loc, "message")`. It also has a potential to
replace OperandMatchResulTy as it is more convenient to use due to the
implicit construction from bool and more type safe.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D154101
to help debug and report better diagnostics for functions like
relaxDwarfCallFrameFragment (D153167).
In MCStreamer, some emitCFI* functions already take a SMLoc argument. Add a
SMLoc argument to the remaining functions that generate a MCCFIInstruction.
These codes deleted are dead code, we never go into it.
1. In AggressiveAntiDepBreaker.cpp, have assert AntiDepReg != 0.
2. IfConversion.cpp, Kind can only be one unique value, so isFalse && isRev
can never be true.
3. DAGCombiner.cpp, at line 3675, we have considered the condition like
```
// fold (sub x, c) -> (add x, -c)
if (N1C) {
return DAG.getNode(ISD::ADD, DL, VT, N0,
DAG.getConstant(-N1C->getAPIntValue(), DL, VT));
}
```
4. ScheduleDAGSDNodes.cpp, we have Latency > 1 at line 663
5. MasmParser.cpp, code exists in a switch-case block which decided by
the value FirstTokenKind, at line 1621, FirstTokenKind could only be
one of AsmToken::Dollar, AsmToken::At and AsmToken::Identifier.
Reviewed By: skan
Differential Revision: https://reviews.llvm.org/D148610
Summary: For functions that accept an rvalue reference type
parameter, use move to avoid copying the parameter.
These were found when implementing CppCoreGuideline F.18 in
clang-tidy.
Committed on behalf of ccotter (Chris Cotter)
Reviewers: Michael137 thieta
Differential Revision: https://reviews.llvm.org/D142825
'{', '}' and (conditionally) '*' were allowed at the start of a
statement. This behavior was copied from AsmParser, where they were
added to support Hexagon bundles (braces) and BFP memory instructions
(the star).
MASM dialect is x86-specific and does not allow these symbols to be
used at the beginning of an instruction.
Worth noting that '{' is a valid first character in AT&T syntax
(e.g. "{vex} vpmadd52huq ..."); MASM variant is to omit the braces.
Reviewed By: epastor
Differential Revision: https://reviews.llvm.org/D142321
The new methods return a range for easier iteration. Use them everywhere
instead of getImplicitUses, getNumImplicitUses, getImplicitDefs and
getNumImplicitDefs. A future patch will remove the old methods.
In some use cases the new methods are less efficient because they always
have to scan the whole uses/defs array to count its length, but that
will be fixed in a future patch by storing the number of implicit
uses/defs explicitly in MCInstrDesc. At that point there will be no need
to 0-terminate the arrays.
Differential Revision: https://reviews.llvm.org/D142215
Change MCInstrDesc::operands to return an ArrayRef so we can easily use
it everywhere instead of the (IMHO ugly) opInfo_begin and opInfo_end.
A future patch will remove opInfo_begin and opInfo_end.
Also use it instead of raw access to the OpInfo pointer. A future patch
will remove this pointer.
Differential Revision: https://reviews.llvm.org/D142213
value() has undesired exception checking semantics and calls
__throw_bad_optional_access in libc++. Moreover, the API is unavailable without
_LIBCPP_NO_EXCEPTIONS on older Mach-O platforms (see
_LIBCPP_AVAILABILITY_BAD_OPTIONAL_ACCESS).
This commit fixes LLVMAnalysis and its dependencies.
Next patch after D139548 and D139439. Same expectations, the change seems safe with as far as llvm goes, we cannot check downstream implementations.
Differential Revision: https://reviews.llvm.org/D139614
Before performing this change, I checked that `ByteAlignment` was never `0` inside `MCAsmStreamer:emitZeroFill` and `MCAsmStreamer::emitLocalCommonSymbol`.
I believe it is NFC as `0` values are illegal in `emitZeroFill` anyways, `Log2(ByteAlignment)` would be undefined.
And currently, all calls to `emitLocalCommonSymbol` are provably `>0`.
Differential Revision: https://reviews.llvm.org/D139439
This breaks Windows bots with
`warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)`
Some shift operators are lacking a proper literal unit ('1ULL' instead of
'1'). Will reland once fixed.
This reverts commit c621c1a8e81856e6bf2be79714767d80466e9ede.
Before performing this change, I checked that `ByteAlignment` was never `0` inside `MCAsmStreamer:emitZeroFill` and `MCAsmStreamer::emitLocalCommonSymbol`.
I believe it is NFC as `0` values are illegal in `emitZeroFill` anyways, `Log2(ByteAlignment)` would be undefined.
And currently, all calls to `emitLocalCommonSymbol` are provably `>0`.
Differential Revision: https://reviews.llvm.org/D139439
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
This patch makes code less readable but it will clean itself after all functions are converted.
Differential Revision: https://reviews.llvm.org/D138665
Although we only currently have one error produced in this function I am
working on changes right now that add some more. This change makes the
error location more accurate.
Differential Revision: https://reviews.llvm.org/D133016
Follow-up after D131595, see comments in the review thread.
The intention of having two constructors was to minimize the copies of
`vector`, but a lack of `std::move` on the call site caused the wrong
constructor to be called.
Switched to a single constructor that accepts a value.
Accepting by value allows to have a single constructor and still decide
to copy or move on the call site.
The C++ Standard requires a complete type T when using any members of
`vector<T>`, see
https://eel.is/c++draft/vector#overview-4.
This only breaks with latest libc++ in C++20 mode and does not show up
in common configurations.
We have an internal experimental configuration that discovered this.
Reviewed By: alexfh
Differential Revision: https://reviews.llvm.org/D131595
Finish adding support for the remaining binary named operators in expression context: XOR, SHL, and SHR.
Differential Revision: https://reviews.llvm.org/D129299
ml.exe and ml64.exe support the use of anonymous labels, with @B and @F referring to the previous and next anonymous label respectively.
We add similar support to llvm-ml, with the exception that we are unable to emit an error message for an @F expression not followed by a @@ label.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D128944
EXTERN PROC isn't really well documented in MSVC, so after poking around
it seems as if it's just a regular extern symbol.
Interestingly enough, under MSVC the following is allowed:
extern foo:proc
mov eax, foo
MSVC will output:
mov eax, 0
while llvm-ml will currently output:
mov eax, dword ptr [foo]
(since foo is an extern)
Arguably, llvm-ml's output makes more sense, even though it's
inconsistent with MSVC ml. However, since moving an extern proc symbol
to a register doesn't really make sense in the first place, we'll treat
it as undefined behavior for now.
Reviewed By: epastor
Differential Revision: https://reviews.llvm.org/D125582
Returning `std::array<uint8_t, N>` is better ergonomics for the hashing functions usage, instead of a `StringRef`:
* When returning `StringRef`, client code is "jumping through hoops" to do string manipulations instead of dealing with fixed array of bytes directly, which is more natural
* Returning `std::array<uint8_t, N>` avoids the need for the hasher classes to keep a field just for the purpose of wrapping it and returning it as a `StringRef`
As part of this patch also:
* Introduce `TruncatedBLAKE3` which is useful for using BLAKE3 as the hasher type for `HashBuilder` with non-default hash sizes.
* Make `MD5Result` inherit from `std::array<uint8_t, 16>` which improves & simplifies its API.
Differential Revision: https://reviews.llvm.org/D123100
