This is another part of #70452 which makes getMemOperandsWithOffsetWidth
use a LocationSize for Width, as opposed to the unsigned it currently
uses. The advantages on it's own are not super high if
getMemOperandsWithOffsetWidth usually uses known sizes, but if the
values can come from an MMO it can help be more accurate in case they
are Unknown (and in the future, scalable).
This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
getOperandLatency has the following behavior: it returns -1 as a special
value, negative numbers other than -1 on some target-specific overrides,
or a valid non-negative latency. This behavior can be surprising, as
some callers do arithmetic on these negative values. Change the
interface of getOperandLatency to return a std::optional<unsigned> to
prevent surprises in callers. While at it, change the interface of
getInstrLatency to return unsigned instead of int.
This change was inspired by a refactoring in
TargetSchedModel::computeOperandLatency.
This will make it easy for callers to see issues with and fix up calls
to createTargetMachine after a future change to the params of
TargetMachine.
This matches other nearby enums.
For downstream users, this should be a fairly straightforward
replacement,
e.g. s/CodeGenOpt::Aggressive/CodeGenOptLevel::Aggressive
or s/CGFT_/CodeGenFileType::
HexagonSubtarget::isTypeFixHVX would stop breaking the type up when it
reached 64 bits in width. HVX vector predicates can be shorter than that,
for example <32 x i1> would have a bitwidth of 32, and it's still a valid
HVX type.
There are intrinsics for most scalar instructions and almost all HVX
instructions. What's somewhat painful is that there are two intrinsics
for each HVX instruction: one for 64- and one for 128-byte mode.
Instead of checking the current codegen settings every time, this
function would simply return the right intrinsic.
EVT can be created for any Type, and so this function can now be used to
check if given Type, as-is, is an HVX type (as opposed to a type that may
be subject to legalization to an HVX type).
Some cl::ZeroOrMore were added to avoid the `may only occur zero or one times!`
error. More were added due to cargo cult. Since the error has been removed,
cl::ZeroOrMore is unneeded.
Also remove cl::init(false) while touching the lines.
If there are multiple uses of the def of COPY/REG_SEQUENCE, set the
latency only if the latencies on all the uses are equal, otherwise set
it to default.
This patch implements initial backend support for a -mtune CPU controlled by a "tune-cpu" function attribute. If the attribute is not present X86 will use the resolved CPU from target-cpu attribute or command line.
This patch adds MC layer support a tune CPU. Each CPU now has two sets of features stored in their GenSubtargetInfo.inc tables . These features lists are passed separately to the Processor and ProcessorModel classes in tablegen. The tune list defaults to an empty list to avoid changes to non-X86. This annoyingly increases the size of static tables on all target as we now store 24 more bytes per CPU. I haven't quantified the overall impact, but I can if we're concerned.
One new test is added to X86 to show a few tuning features with mismatched tune-cpu and target-cpu/target-feature attributes to demonstrate independent control. Another new test is added to demonstrate that the scheduler model follows the tune CPU.
I have not added a -mtune to llc/opt or MC layer command line yet. With no attributes we'll just use the -mcpu for both. MC layer tools will always follow the normal CPU for tuning.
Differential Revision: https://reviews.llvm.org/D85165
SUnit represent a MachineInstr in post-regalloc scheduling but SDNode
in pre-regalloc scheduling. when pass -enable-hexagon-sdnode-sched to
Hexagon backend with -O1 and above, this may cause an assertion failed.
Fixes PR45194.
Differential Revision: https://reviews.llvm.org/D76134
While restoring latency, check if any of the registers of
source instruction is a subregister of the successor instructions
apart from being same register.
This allows targets to know exactly which operands are contributing to
the dependency, which is required for targets with per-operand
scheduling models.
Differential Revision: https://reviews.llvm.org/D77135
This is how it should've been and brings it more in line with
std::string_view. There should be no functional change here.
This is mostly mechanical from a custom clang-tidy check, with a lot of
manual fixups. It uncovers a lot of minor inefficiencies.
This doesn't actually modify StringRef yet, I'll do that in a follow-up.
Differential revision: https://reviews.llvm.org/D72701
The patch adds a new option ABI for Hexagon. It primary deals with
the way variable arguments are passed and is use in the Hexagon Linux Musl
environment.
If a callee function has a variable argument list, it must perform the
following operations to set up its function prologue:
1. Determine the number of registers which could have been used for passing
unnamed arguments. This can be calculated by counting the number of
registers used for passing named arguments. For example, if the callee
function is as follows:
int foo(int a, ...){ ... }
... then register R0 is used to access the argument ' a '. The registers
available for passing unnamed arguments are R1, R2, R3, R4, and R5.
2. Determine the number and size of the named arguments on the stack.
3. If the callee has named arguments on the stack, it should copy all of these
arguments to a location below the current position on the stack, and the
difference should be the size of the register-saved area plus padding
(if any is necessary).
The register-saved area constitutes all the registers that could have
been used to pass unnamed arguments. If the number of registers forming
the register-saved area is odd, it requires 4 bytes of padding; if the
number is even, no padding is required. This is done to ensure an 8-byte
alignment on the stack. For example, if the callee is as follows:
int foo(int a, ...){ ... }
... then the named arguments should be copied to the following location:
current_position - 5 (for R1-R5) * 4 (bytes) - 4 (bytes of padding)
If the callee is as follows:
int foo(int a, int b, ...){ ... }
... then the named arguments should be copied to the following location:
current_position - 4 (for R2-R5) * 4 (bytes) - 0 (bytes of padding)
4. After any named arguments have been copied, copy all the registers that
could have been used to pass unnamed arguments on the stack. If the number
of registers is odd, leave 4 bytes of padding and then start copying them
on the stack; if the number is even, no padding is required. This
constitutes the register-saved area. If padding is required, ensure
that the start location of padding is 8-byte aligned. If no padding is
required, ensure that the start location of the on-stack copy of the
first register which might have a variable argument is 8-byte aligned.
5. Decrement the stack pointer by the size of register saved area plus the
padding. For example, if the callee is as follows:
int foo(int a, ...){ ... } ;
... then the decrement value should be the following:
5 (for R1-R5) * 4 (bytes) + 4 (bytes of padding) = 24 bytes
The decrement should be performed before the allocframe instruction.
Increment the stack-pointer back by the same amount before returning
from the function.
This requires std::intializer_list to be a literal type, which it is
starting with C++14. The downside is that std::bitset is still not
constexpr-friendly so this change contains a re-implementation of most
of it.
Shrinks clang by ~60k.
llvm-svn: 369847
Summary:
This clang-tidy check is looking for unsigned integer variables whose initializer
starts with an implicit cast from llvm::Register and changes the type of the
variable to llvm::Register (dropping the llvm:: where possible).
Partial reverts in:
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
X86FixupLEAs.cpp - Some functions return unsigned and arguably should be MCRegister
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
HexagonBitSimplify.cpp - Function takes BitTracker::RegisterRef which appears to be unsigned&
MachineVerifier.cpp - Ambiguous operator==() given MCRegister and const Register
PPCFastISel.cpp - No Register::operator-=()
PeepholeOptimizer.cpp - TargetInstrInfo::optimizeLoadInstr() takes an unsigned&
MachineTraceMetrics.cpp - MachineTraceMetrics lacks a suitable constructor
Manual fixups in:
ARMFastISel.cpp - ARMEmitLoad() now takes a Register& instead of unsigned&
HexagonSplitDouble.cpp - Ternary operator was ambiguous between unsigned/Register
HexagonConstExtenders.cpp - Has a local class named Register, used llvm::Register instead of Register.
PPCFastISel.cpp - PPCEmitLoad() now takes a Register& instead of unsigned&
Depends on D65919
Reviewers: arsenm, bogner, craig.topper, RKSimon
Reviewed By: arsenm
Subscribers: RKSimon, craig.topper, lenary, aemerson, wuzish, jholewinski, MatzeB, qcolombet, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, wdng, nhaehnle, sbc100, jgravelle-google, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, javed.absar, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, tpr, PkmX, jocewei, jsji, Petar.Avramovic, asbirlea, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65962
llvm-svn: 369041
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Currently, instructions doing memory accesses through a base operand that is
not a register can not be analyzed using `TII::getMemOpBaseRegImmOfs`.
This means that functions such as `TII::shouldClusterMemOps` will bail
out on instructions using an FI as a base instead of a register.
The goal of this patch is to refactor all this to return a base
operand instead of a base register.
Then in a separate patch, I will add FI support to the mem op clustering
in the MachineScheduler.
Differential Revision: https://reviews.llvm.org/D54846
llvm-svn: 347746
Add the generic processor for Hexagon so that it can be used
with 3rd party programs that create a back-end with the
"generic" CPU. This patch also enables the JIT for Hexagon.
Differential Revision: https://reviews.llvm.org/D48571
llvm-svn: 335641
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
The patch contains severals changes needed to pipeline an example
that was transformed so that a Phi with a subreg is converted to
copies.
The pipeliner wasn't working for a couple of reasons.
- The RecMII was 3 instead of 2 due to the extra copies.
- Copy instructions contained a latency of 1.
- The node order algorithm was not choosing the best "bottom"
node, which caused an instruction to be scheduled that had a
predecessor and successor already scheduled.
- Updated the Hexagon Machine Scheduler to check if the node is
latency bound when adding the cost for a 0-latency dependence.
The RecMII was 3 because the computation looks at the number of
nodes in the recurrence. The extra copy is an extra node but
it shouldn't increase the latency. The new RecMII computation
looks at the latency of the instructions in the recurrence. We
changed the latency of the dependence of a copy to 0. The latency
computation for the copy also checks the use of the copy (similar
to a reg_sequence).
The node order algorithm was not choosing the last instruction
in the recurrence for a bottom up traversal. This was when the
last instruction is a copy. A check was added when choosing the
instruction to check for NodeNum if the maxASAP is the same. This
means that the scheduler will not end up with another node in
the recurrence that has both a predecessor and successor already
scheduled.
The cost computation in Hexagon Machine Scheduler adds cost when
an instruction can be packetized with a zero-latency instruction.
We should only do this if the schedule is latency bound.
Patch by Brendon Cahoon.
llvm-svn: 328542
Add barrier edges to check for any physical register. The previous code
worked for the function return registers: r0/d0, v0/w0.
Patch by Brendon Cahoon.
llvm-svn: 328120
