This patch adds the majority of the missing extended mnemonics that were
introduced in Power 10.
The only extended mnemonics that were not added are related to the plq
and pstq instructions. These will be added in a separate patch as the
instructions themselves would also have to be added.
The SCV instruciton was added on PowerPC on Power 9. This patch adds the
SCV so that it may be used as part of inline asm but does not provide
patterns for it or scheduling information.
Co-authored-by: Stefan Pintilie <stefanp@ca.ibm.com>
This fixes issue 64080. tlbilx exists in ISA 2.07 Book III-E. Since
contents of Book III-E were eliminated after ISA 3.0, tlbilx does not
exist in ISA 3.0 and ISA 3.1.
Reviewed By: nickdesaulniers
Differential Revision: https://reviews.llvm.org/D156204
Adding the td definitions, and their associated assembly and disassembly
test cases for the decimal floating point test instructions defined in
section 5.6.3 of ISA 3.1
Reviewed By: lei, amyk
Differential Revision: https://reviews.llvm.org/D154606
Add td definitions and asm/disasm tests for the dfp format
instructions in ISA 3.1 section 5.6.6
Reviewed By: stefanp, kamaub
Differential Revision: https://reviews.llvm.org/D154465
Add td definitions and asm/disasm tests for the quantum adjustment
instructions in ISA 3.1 section 5.6.4
Reviewed By: stefanp
Differential Revision: https://reviews.llvm.org/D154369
This is a follow-on to https://reviews.llvm.org/D134073.
Currently, all of the "memri"-style complex operands, which contain
both a register and an immediate, are encoded into a single field in
the instruction definition. This requires complex encoders/decoders,
and instruction definitions that insert and extract the correct parts
of the bits.
Now, switch to naming and encoding/decoding the sub-operands
separately.
Thus, we can now disable useDeprecatedPositionallyEncodedOperands.
Reviewed By: barannikov88
Differential Revision: https://reviews.llvm.org/D137670
This is a follow-on to https://reviews.llvm.org/D134073.
After https://reviews.llvm.org/D137653 we can now switch the PPC
target away from positional operand matching.
This patch fixes all of the "easy" cases. While this changes a large
number of lines of tablegen source, it results in only a single
non-comment change in the code generated by tablegen: the (unused)
codegen-only "MTVRSAVEv" instruction was previously incorrectly
encoding operand 0, and now encodes (correctly) operand 1.
Changes which result in generated-code changes have been split off
into the next (smaller) patch, for ease of review.
Reviewed By: barannikov88
Differential Revision: https://reviews.llvm.org/D137661
Inputs to crnor can come from operands with chains so
if it is being used simply to negate such an operand,
the repeated input cannot be CSE'd. This patch just
adds a code-gen only instruction for this that takes
a single input and duplicates it in the encoding of
the underlying crnor.
Differential revision: https://reviews.llvm.org/D133577
This patch fixes the following two bugs in `PPCInstrInfo::isSignOrZeroExtended` helper, which is used from sign-/zero-extension elimination in PPCMIPeephole pass.
- Registers defined by load with update (e.g. LBZU) were identified as already sign or zero-extended. But it is true only for the first def (loaded value) and not for the second def (i.e. updated pointer).
- Registers defined by ORIS/XORIS were identified as already sign-extended. But, it is not true for sign extension depending on the immediate (while it is ok for zero extension).
To handle the first case, the parameter for the helpers is changed from `MachineInstr` to a register number to distinguish first and second defs. Also, this patch moves the initialization of PPCMIPeepholePass to allow mir test case.
Reviewed By: nemanjai
Differential Revision: https://reviews.llvm.org/D40554
Add td definitions and asm/disasm tests for the addex instruction introduced in
ISA 3.0.
Reviewed By: nemanjai, amyk, NeHuang
Differential Revision: https://reviews.llvm.org/D106666
Export `lq`, `stq`, `lqarx` and `stqcx.` in preparation for implementing 16-byte lock free atomic operations on AIX.
Add a new register class `g8prc` for these instructions, since these instructions require even-odd register pair.
Reviewed By: nemanjai, jsji, #powerpc
Differential Revision: https://reviews.llvm.org/D103010
There are four new PowerPC instructions that are introduced in
Power 10. They are hashst, hashchk, hashstp, hashchkp.
These instructions will be used for ROP Protection.
This patch adds the four instructions.
Reviewed By: nemanjai, amyk, #powerpc
Differential Revision: https://reviews.llvm.org/D99375
This reverts commit 16fe741c69429235210c03c46420f8fa6aece4a1.
Reason: Broke the UBSan buildbots. More information available in the
phabricator review: https://reviews.llvm.org/D99375
There are four new PowerPC instructions that are introduced in
Power 10. They are hashst, hashchk, hashstp, hashchkp.
These instructions will be used for ROP Protection.
This patch adds the four instructions.
Reviewed By: nemanjai, amyk, #powerpc
Differential Revision: https://reviews.llvm.org/D99375
PowerPC has instruction ftsqrt/xstsqrtdp etc to do the input test for software square root.
LLVM now tests it with smallest normalized value using abs + setcc. We should add hook to
target that has test instructions.
Reviewed By: Spatel, Chen Zheng, Qiu Chao Fang
Differential Revision: https://reviews.llvm.org/D80706
Future CPU will include support for prefixed instructions.
These prefixed instructions are formed by a 4 byte prefix
immediately followed by a 4 byte instruction effectively
making an 8 byte instruction. The new instruction paddi
is a prefixed form of addi.
This patch adds paddi and all of the support required
for that instruction. The majority of the patch deals with
supporting the new prefixed instructions. The addition of
paddi is mainly to allow for testing.
Differential Revision: https://reviews.llvm.org/D72569
We removed UseVSXReg flag in https://reviews.llvm.org/D58685
But we did not reclain the bit 6 it was assigned,
this will become confusing and a hole later..
We should reclaim it as early as possible before new bits.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D72649
We use o suffix to indicate record form instuctions,
(as it is similar to dot '.' in mne?)
This was fine before, as we did not support XO-form.
However, with https://reviews.llvm.org/D66902,
we now have XO-form support.
It becomes confusing now to still use 'o' for record form,
and it is weird to have something like 'Oo' .
This patch rename all 'o' instructions to use '_rec' instead.
Also rename `isDot` to `isRecordForm`.
Reviewed By: #powerpc, hfinkel, nemanjai, steven.zhang, lkail
Differential Revision: https://reviews.llvm.org/D70758
Extends the desciptor-based indirect call support for 32-bit codegen,
and enables indirect calls for AIX.
In-depth Description:
In a function descriptor based ABI, a function pointer points at a
descriptor structure as opposed to the function's entry point. The
descriptor takes the form of 3 pointers: 1 for the function's entry
point, 1 for the TOC anchor of the module containing the function
definition, and 1 for the environment pointer:
struct FunctionDescriptor {
void *EntryPoint;
void *TOCAnchor;
void *EnvironmentPointer;
};
An indirect call has several steps of loading the the information from
the descriptor into the proper registers for setting up the call. Namely
it has to:
1) Save the caller's TOC pointer into the TOC save slot in the linkage
area, and then load the callee's TOC pointer into the TOC register
(GPR 2 on AIX).
2) Load the function descriptor's entry point into the count register.
3) Load the environment pointer into the environment pointer register
(GPR 11 on AIX).
4) Perform the call by branching on count register.
5) Restore the caller's TOC pointer after returning from the indirect call.
A couple important caveats to the above:
- There is no way to directly load a value from memory into the count register.
Instead we populate the count register by loading the entry point address into
a gpr and then moving the gpr to the count register.
- The TOC restore has to come immediately after the branch on count register
instruction (i.e., the 1st instruction executed after we return from the
call). This is an implementation limitation. We could, in theory, schedule
the restore elsewhere as long as no uses of the TOC pointer fall in between
the call and the restore; however, to keep it simple, we insert a pseudo
instruction that represents both the indirect branch instruction and the
load instruction that restores the caller's TOC from the linkage area. As
they flow through the compiler as a single pseudo instruction, nothing can be
inserted between them and the caller's TOC is then valid at any use.
Differtential Revision: https://reviews.llvm.org/D70724
Did experiments on power 9 machine, checked the outputs for NaN & Infinity+
cases with corresponding DCMX bit set. Confirmed the DCMX mask bit for NaN and
infinity+ are reversed.
This patch fixes the issue.
Patch by Victor Huang.
Differential Revision: https://reviews.llvm.org/D59384
llvm-svn: 357494
The UseVSXReg flag can be safely removed and the code cleaned up.
Patch By: Yi-Hong Liu
Differential Revision: https://reviews.llvm.org/D58685
llvm-svn: 357028
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
There are several Pseudo in PowerPC backend.
eg:
* ISel Pseudo-instructions , which has let usesCustomInserter=1 in td
ExpandISelPseudos -> EmitInstrWithCustomInserter will deal with them.
* Post-RA pseudo instruction, which has let isPseudo = 1 in td, or Standard pseudo (SUBREG_TO_REG,COPY etc.)
ExpandPostRAPseudos -> expandPostRAPseudo will expand them
* Multi-instruction pseudo operations will expand them PPCAsmPrinter::EmitInstruction
* Pseudo instruction in CodeEmitter, which has encoding of 0.
Currently, in td files, especially PPCInstrVSX.td,
we did not distinguish Post-RA pseudo instruction and Pseudo instruction in CodeEmitter very clearly.
This patch is to
* Rename Pseudo<> class to PPCEmitTimePseudo, which means encoding of 0 in CodeEmitter
* Introduce new class PPCPostRAExpPseudo <> for previous PostRA Pseudo
* Introduce new class PPCCustomInserterPseudo <> for previous Isel Pseudo
Differential Revision: https://reviews.llvm.org/D55143
llvm-svn: 349044
xsrqpi is currently using Z23Form_1.
The instruction format is xsrqpi R,VRT,VRB,RMC.
Rathar than bits 11-15 being used for FRA, it should have
bits 11-14 reserved and bit 15 for R. This patch adds a new
class Z23Form_4 to fix the instruction format.
Differential Revision: https://reviews.llvm.org/D46761
llvm-svn: 332253
A new function getOpcodeForSpill should now be the only place to get
the opcode for a given spilled register.
Differential Revision: https://reviews.llvm.org/D43086
llvm-svn: 328556
This patch just adds the missing information to the P9 scheduling model to allow
the model to be marked as complete.
The model has been verified against P9 documentation. The model was verified
with utils/schedcover.py.
Differential Revision: https://reviews.llvm.org/D35695
llvm-svn: 314026
This patch corresponds to review:
https://reviews.llvm.org/D23155
This patch removes the VSHRC register class (based on D20310) and adds
exploitation of the Power9 sub-word integer loads into VSX registers as well
as vector sign extensions.
The new instructions are useful for a few purposes:
Int to Fp conversions of 1 or 2-byte values loaded from memory
Building vectors of 1 or 2-byte integers with values loaded from memory
Storing individual 1 or 2-byte elements from integer vectors
This patch implements all of those uses.
llvm-svn: 283190
This patch corresponds to review:
https://reviews.llvm.org/D21135
This patch exploits the following instructions:
mtvsrws
lxvwsx
mtvsrdd
mfvsrld
In order to improve some build_vector and extractelement patterns.
llvm-svn: 282246
PowerPC assembly code in the wild, so it seems, has things like this:
bc+ 12, 28, .L9
This is a bit odd because the '+' here becomes part of the BO field, and the BO
field is otherwise the first operand. Nevertheless, the ISA specification does
clearly say that the +- hint syntax applies to all conditional-branch mnemonics
(that test either CTR or a condition register, although not the forms which
check both), both basic and extended, so this is supposed to be valid.
This introduces some asm-parser-only definitions which take only the upper
three bits from the specified BO value, and the lower two bits are implied by
the +- suffix (via some associated aliases).
Fixes PR23646.
llvm-svn: 280571
Revert "[Power9] Implement add-pc, multiply-add, modulo, extend-sign-shift, random number, set bool, and dfp test significance".
This patch has caused a functional regression in SPEC2k6 namd, and a performance regression in mesa-pipe.
llvm-svn: 267927
This patch corresponds to review:
http://reviews.llvm.org/D17850
This patch implements the following instructions:
cmprb, cmpeqb, cnttzw, cnttzw., cnttzd, cnttzd.
llvm-svn: 266228
This patch implements the following BookII and Book III instructions:
- copy copy_first cp_abort paste paste. paste_last
- msgsync
- slbieg slbsync
- stop
Total 10 instructions
Reviewers: nemanjai hfinkel tjablin amehsan kbarton
llvm-svn: 265504
This patch corresponds to review:
http://reviews.llvm.org/D18032
This patch provides asm implementation for the following instructions:
lwat, ldat, stwat, stdat, ldmx, mcrxrx
llvm-svn: 265022
