Similar to 806761a7629df268c8aed49657aeccffa6bca449.
For IR files without a target triple, -mtriple= specifies the full
target triple while -march= merely sets the architecture part of the
default target triple, leaving a target triple which may not make sense,
e.g. amdgpu-apple-darwin.
Therefore, -march= is error-prone and not recommended for tests without
a target triple. The issue has been benign as we recognize
$unknown-apple-darwin as ELF instead of rejecting it outrightly.
This patch changes AMDGPU tests to not rely on the default
OS/environment components. Tests that need fixes are not changed:
```
LLVM :: CodeGen/AMDGPU/fabs.f64.ll
LLVM :: CodeGen/AMDGPU/fabs.ll
LLVM :: CodeGen/AMDGPU/floor.ll
LLVM :: CodeGen/AMDGPU/fneg-fabs.f64.ll
LLVM :: CodeGen/AMDGPU/fneg-fabs.ll
LLVM :: CodeGen/AMDGPU/r600-infinite-loop-bug-while-reorganizing-vector.ll
LLVM :: CodeGen/AMDGPU/schedule-if-2.ll
```
Tablegen definitions for subtarget features and cpp predicate functions to
access the features.
New Sub-TargetProcessors and common latencies.
Simple changes to MIR codegen tests which pass on gfx11 because they have the
same output as previous subtargets or operate on pseudo instructions which
are reused from previous subtargets.
Contributors:
Jay Foad <jay.foad@amd.com>
Petar Avramovic <Petar.Avramovic@amd.com>
Patch 4/N for upstreaming of AMDGPU gfx11 architecture
Depends on D124538
Reviewed By: Petar.Avramovic, foad
Differential Revision: https://reviews.llvm.org/D125261
This will currently accept the old number of bytes syntax, and convert
it to a scalar. This should be removed in the near future (I think I
converted all of the tests already, but likely missed a few).
Not sure what the exact syntax and policy should be. We can continue
printing the number of bytes for non-generic instructions to avoid
test churn and only allow non-scalar types for generic instructions.
This will currently print the LLT in parentheses, but accept parsing
the existing integers and implicitly converting to scalar. The
parentheses are a bit ugly, but the parser logic seems unable to deal
without either parentheses or some keyword to indicate the start of a
type.
Replace individual operands GLC, SLC, and DLC with a single cache_policy
bitmask operand. This will reduce the number of operands in MIR and I hope
the amount of code. These operands are mostly 0 anyway.
Additional advantage that parser will accept these flags in any order unlike
now.
Differential Revision: https://reviews.llvm.org/D96469
We don't register i128 as a legal type with addRegisterClass, but it
appears in the list of legal register types. This inconsistency
resulted in the asm constraint lowering trying to use 2 128-bit
registers for these operands. This would leave behind a dead def that
would waste registers.
Regresses GlobalISel tests for i128 load/store, but these aren't very
important right now. Ideally these would not depend on the list of
register types.
ISD::ATOMIC_STORE arbitrarily has the operands in the opposite order
from regular ISD::STORE, which always introduced an annoying
duplication of patterns to handle both cases. Since in GlobalISel
there's just the one G_STORE, we need to swap the operands to
correctly emit the type check for the pointer operand.
Some work started in 20aafa31569b5157e792daa8860d71dd0df8a53a to
migrate SelectionDAG to use ISD::STORE for atomics, but that work
seems to have stalled. Since this is the pretty much the last
operation which matters which isn't supported for AMDGPU, use this
compatibility hack to unblock declaring it functionally complete.
Not sure what's going on with the pending_phis AArch64 test. It seems
it didn't always use atomics, and I'm not sure what it was originally
testing matters anymore.
The hardware has created a real mess in the naming for add/sub, which
have been renamed basically every generation. Switch the carry out
pseudos to have the gfx9/gfx10 names. We were using the original SI/CI
v_add_i32/v_sub_i32 names. Later targets reintroduced these names as
carryless instructions with a saturating clamp bit, which we do not
define. Do this rename so we can unambiguously add these missing
instructions.
The carry-in versions should also be renamed, but at least those had a
consistent _u32 name to begin with. The 16-bit instructions were also
renamed, but aren't ambiguous.
This does regress assembler error message quality in some cases. In
mismatched wave32/wave64 situations, this will switch from
"unsupported instruction" to "invalid operand", with the error
pointing at the wrong position. I couldn't quite follow how the
assembler selects these, but the previous behavior seemed accidental
to me. It looked like there was a partial attempt to handle this which
was never completed (i.e. there is an AMDGPUOperand::isBoolReg but it
isn't used for anything).
The logic is written for what loads/stores should be selectable. There
are a set of cases that should be selectable, but due to missing MVTs
and/or selection patterns, will fail to select. I think eventually
load/store select patterns should ignore the type and only look at the
value size, but until that happens, bitcast these to equivalent i32
vectors.
Summary:
G_GEP is rather poorly named. It's a simple pointer+scalar addition and
doesn't support any of the complexities of getelementptr. I therefore
propose that we rename it. There's a G_PTR_MASK so let's follow that
convention and go with G_PTR_ADD
Reviewers: volkan, aditya_nandakumar, bogner, rovka, arsenm
Subscribers: sdardis, jvesely, wdng, nhaehnle, hiraditya, jrtc27, atanasyan, arphaman, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69734
As Roman Tereshin pointed out in https://reviews.llvm.org/D45541, the
-global-isel option is redundant when -run-pass is given. -global-isel sets up
the GlobalISel passes in the pass manager but -run-pass skips that entirely and
configures it's own pipeline.
llvm-svn: 331603
Discussed here:
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120320.html
In preparation for adding support for named vregs we are changing the sigil for
physical registers in MIR to '$' from '%'. This will prevent name clashes of
named physical register with named vregs.
llvm-svn: 323922
This updates the MIRPrinter to include the regclass when printing
virtual register defs, which is already valid syntax for the
parser. That is, given 64 bit %0 and %1 in a "gpr" regbank,
%1(s64) = COPY %0(s64)
would now be written as
%1:gpr(s64) = COPY %0(s64)
While this change alone introduces a bit of redundancy with the
registers block, it allows us to update the tests to be more concise
and understandable and brings us closer to being able to remove the
registers block completely.
Note: We generally only print the class in defs, but there is one
exception. If there are uses without any defs whatsoever, we'll print
the class on all uses. I'm not completely convinced this comes up in
meaningful machine IR, but for now the MIRParser and MachineVerifier
both accept that kind of stuff, so we don't want to have a situation
where we can print something we can't parse.
llvm-svn: 316479
We don't use it and it was removed in gfx9, and the encoding
bit repurposed.
Additionally actually using it requires changing the output register
class, which wasn't done anyway.
llvm-svn: 302814
Currently the default C calling convention functions are treated
the same as compute kernels. Make this explicit so the default
calling convention can be changed to a non-kernel.
Converted with perl -pi -e 's/define void/define amdgpu_kernel void/'
on the relevant test directories (and undoing in one place that actually
wanted a non-kernel).
llvm-svn: 298444
