Introduced the convergent equivalent of the existing G_INTRINSIC opcodes:
- G_INTRINSIC_CONVERGENT
- G_INTRINSIC_CONVERGENT_W_SIDE_EFFECTS
Out of the targets that currently have some support for GlobalISel, the patch
assumes that the convergent intrinsics only relevant to SPIRV and AMDGPU.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D154766
Re-land D145441 with data layout upgrade code fixed to not break OpenMP.
This reverts commit 3f2fbe92d0f40bcb46db7636db9ec3f7e7899b27.
Differential Revision: https://reviews.llvm.org/D149776
Per discussion at
https://discourse.llvm.org/t/representing-buffer-descriptors-in-the-amdgpu-target-call-for-suggestions/68798,
we define two new address spaces for AMDGCN targets.
The first is address space 7, a non-integral address space (which was
already in the data layout) that has 160-bit pointers (which are
256-bit aligned) and uses a 32-bit offset. These pointers combine a
128-bit buffer descriptor and a 32-bit offset, and will be usable with
normal LLVM operations (load, store, GEP). However, they will be
rewritten out of existence before code generation.
The second of these is address space 8, the address space for "buffer
resources". These will be used to represent the resource arguments to
buffer instructions, and new buffer intrinsics will be defined that
take them instead of <4 x i32> as resource arguments. ptr
addrspace(8). These pointers are 128-bits long (with the same
alignment). They must not be used as the arguments to getelementptr or
otherwise used in address computations, since they can have
arbitrarily complex inherent addressing semantics that can't be
represented in LLVM. Even though, like their address space 7 cousins,
these pointers have deterministic ptrtoint/inttoptr semantics, they
are defined to be non-integral in order to prevent optimizations that
rely on pointers being a [0, [addr_max]] value from applying to them.
Future work includes:
- Defining new buffer intrinsics that take ptr addrspace(8) resources.
- A late rewrite to turn address space 7 operations into buffer
intrinsics and offset computations.
This commit also updates the "fallback address space" for buffer
intrinsics to the buffer resource, and updates the alias analysis
table.
Depends on D143437
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D145441
Uniformity analysis needs to be the fundamental basis for
regbank decisions. The considerations of the default pass
are secondary, but potentially useful for some edge cases (e.g.
selecting AGPRs when arbitrary loads and stores can directly use
them). This needs to be a separate pass since it requires new
analysis dependencies.
Boilerplate to subclass the existing pass which does nothing
different.
The use of a PSV for buffer intrinsics is misleading because it may be
misinterpreted as all buffer intrinsics accessing the same address in
memory, which is clearly not true.
Instead, build MachineMemOperands without a pointer value but with an
address space, so that address space-based alias analysis can still
work.
There is a lot of test churn because previously address space 4
(constant address space) was used as an address space for buffer
intrinsics. This doesn't make much sense and seems to have been an
accident -- see the change in
AMDGPUTargetMachine::getAddressSpaceForPseudoSourceKind.
Differential Revision: https://reviews.llvm.org/D138711
A later change will add a 3rd user, so factoring out the common code
seems useful.
Reorganizing the executeInWaterfallLoop causes some more COPYs to be
generated, but those all fold away during instruction selection.
Generating the comparisons uses generic instructions over machine
instructions now which admittedly shouldn't make a difference
(though it should make it easier to move the waterfall loop generation
to another place).
(Resubmit with missing test added.)
Differential Revision: https://reviews.llvm.org/D125324
A later change will add a 3rd user, so factoring out the common code
seems useful.
Reorganizing the executeInWaterfallLoop causes some more COPYs to be
generated, but those all fold away during instruction selection.
Generating the comparisons uses generic instructions over machine
instructions now which admittedly shouldn't make a difference
(though it should make it easier to move the waterfall loop generation
to another place).
Differential Revision: https://reviews.llvm.org/D125324
Split waterfall loops into multiple blocks so that exec mask
manipulation (s_and_saveexec) does not occur in the middle of
a block.
VGPR live range optimizer is updated to handle waterfall loops
spanning multiple blocks.
Reviewed By: ruiling
Differential Revision: https://reviews.llvm.org/D122200
Stop using the _term variants of the mov to save the initial exec
value before the waterfall loop. This cannot be glued to the bottom of
the block because we may need to spill the result register. Just use a
regular mov, like the loops produced on the DAG path. Fixes some
verification errors with regalloc fast.
- Move the `s_and exec` to its correct position before the content of
the waterfall loop
- Use the SI_WATERFALL pseudo instruction, like for sdag, to benefit
from optimizations
- Add support for indirect function calls
To support indirect calls, add a G_SI_CALL instruction without register
class restrictions and insert a waterfall loop when applying register
banks.
Differential Revision: https://reviews.llvm.org/D109052
Codegen for the raw/struct buffer access intrinsics would update the
offset in the MMO to reflect the combined offset, if it was known to be
constant. If the combined offset was not known to be constant, or if
there was an index, it would set the offset in the MMO to 0. This is
unsafe because it makes it look like the access does not alias with
another access with a fixed non-zero offset.
Fix these cases by setting the pointer in the MMO to null, to reflect
the fact that we do not have any known IR value pointer + constant
offset for the access.
D106284 did this for SelectionDAG. This is the corresponding fix for
GlobalISel.
Differential Revision: https://reviews.llvm.org/D106451
This will currently accept the old number of bytes syntax, and convert
it to a scalar. This should be removed in the near future (I think I
converted all of the tests already, but likely missed a few).
Not sure what the exact syntax and policy should be. We can continue
printing the number of bytes for non-generic instructions to avoid
test churn and only allow non-scalar types for generic instructions.
This will currently print the LLT in parentheses, but accept parsing
the existing integers and implicitly converting to scalar. The
parentheses are a bit ugly, but the parser logic seems unable to deal
without either parentheses or some keyword to indicate the start of a
type.
AMDGPU currently has a lot of pre-processing code to pre-split
argument types into 32-bit pieces before passing it to the generic
code in handleAssignments. This is a bit sloppy and also requires some
overly fancy iterator work when building the calls. It's better if all
argument marshalling code is handled directly in
handleAssignments. This handles more situations like decomposing large
element vectors into sub-element sized pieces.
This should mostly be NFC, but does change the generated code by
shifting where the initial argument packing instructions are placed. I
think this is nicer looking, since it now emits the packing code
directly after the relevant copies, rather than after the copies for
the remaining arguments.
This doubles down on gfx6/gfx7 using the gfx8+ ABI for 16-bit
types. This is ultimately the better option, but incompatible with the
DAG. Fixing this requires more work, especially for f16.
Allow parsing generated mir with custom pseudo source value tokens.
Also rename pseudo source values to have more meaningful names.
Relands ba7dcd8542ab, which had memory leaks.
Differential Revision: https://reviews.llvm.org/D95215
Allow parsing generated mir with custom pseudo source value tokens.
Also rename pseudo source values to have more meaningful names.
Differential Revision: https://reviews.llvm.org/D94768
Use intermediate instructions, unlike with buffer stores. This is
necessary because of the need to have an internal way to distinguish
between signed and unsigned extloads. This introduces some duplication
and near duplication with the buffer store selection path. The store
handling should maybe be moved into legalization to match and
eliminate the duplication.
Summary:
Added MIRFormatter for target specific MIR formating and parsing with
immediate and custom pseudo source values. Target machine can subclass
MIRFormatter and implement custom logic for printing and parsing
immediate and custom pseudo source values for better readability.
* Target specific immediate mnemonic need to start with "." follows by
identifier string. When MIR parser sees immediate it will call target
specific parsing function.
* Custom pseudo source value need to start with custom follows by
double-quoted string. MIR parser will pass the quoted string to target
specific PSV parsing function.
* MIRFormatter have 2 helper functions to facilitate LLVM value printing
and parsing for custom PSV if they refers LLVM values.
Patch by Peng Guo
Reviewers: dsanders, arsenm
Reviewed By: dsanders
Subscribers: wdng, jvesely, nhaehnle, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69836
Summary:
Added MIRFormatter for target specific MIR formating and parsing with
immediate and custom pseudo source values. Target machine can subclass
MIRFormatter and implement custom logic for printing and parsing
immediate and custom pseudo source values for better readability.
* Target specific immediate mnemonic need to start with "." follows by
identifier string. When MIR parser sees immediate it will call target
specific parsing function.
* Custom pseudo source value need to start with custom follows by
double-quoted string. MIR parser will pass the quoted string to target
specific PSV parsing function.
* MIRFormatter have 2 helper functions to facilitate LLVM value printing
and parsing for custom PSV if they refers LLVM values.
Reviewers: dsanders, arsenm
Reviewed By: dsanders
Subscribers: wdng, jvesely, nhaehnle, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69836
This reverts r372314, reapplying r372285 and the commits which depend
on it (r372286-r372293, and r372296-r372297)
This was missing one switch to getTargetConstant in an untested case.
llvm-svn: 372338
This broke the Chromium build, causing it to fail with e.g.
fatal error: error in backend: Cannot select: t362: v4i32 = X86ISD::VSHLI t392, Constant:i8<15>
See llvm-commits thread of r372285 for details.
This also reverts r372286, r372287, r372288, r372289, r372290, r372291,
r372292, r372293, r372296, and r372297, which seemed to depend on the
main commit.
> Encode them directly as an imm argument to G_INTRINSIC*.
>
> Since now intrinsics can now define what parameters are required to be
> immediates, avoid using registers for them. Intrinsics could
> potentially want a constant that isn't a legal register type. Also,
> since G_CONSTANT is subject to CSE and legalization, transforms could
> potentially obscure the value (and create extra work for the
> selector). The register bank of a G_CONSTANT is also meaningful, so
> this could throw off future folding and legalization logic for AMDGPU.
>
> This will be much more convenient to work with than needing to call
> getConstantVRegVal and checking if it may have failed for every
> constant intrinsic parameter. AMDGPU has quite a lot of intrinsics wth
> immarg operands, many of which need inspection during lowering. Having
> to find the value in a register is going to add a lot of boilerplate
> and waste compile time.
>
> SelectionDAG has always provided TargetConstant for constants which
> should not be legalized or materialized in a register. The distinction
> between Constant and TargetConstant was somewhat fuzzy, and there was
> no automatic way to force usage of TargetConstant for certain
> intrinsic parameters. They were both ultimately ConstantSDNode, and it
> was inconsistently used. It was quite easy to mis-select an
> instruction requiring an immediate. For SelectionDAG, start emitting
> TargetConstant for these arguments, and using timm to match them.
>
> Most of the work here is to cleanup target handling of constants. Some
> targets process intrinsics through intermediate custom nodes, which
> need to preserve TargetConstant usage to match the intrinsic
> expectation. Pattern inputs now need to distinguish whether a constant
> is merely compatible with an operand or whether it is mandatory.
>
> The GlobalISelEmitter needs to treat timm as a special case of a leaf
> node, simlar to MachineBasicBlock operands. This should also enable
> handling of patterns for some G_* instructions with immediates, like
> G_FENCE or G_EXTRACT.
>
> This does include a workaround for a crash in GlobalISelEmitter when
> ARM tries to uses "imm" in an output with a "timm" pattern source.
llvm-svn: 372314
