Reland the original patch with additional commit containing fix for two
issues:
1. Attempting to bitcast using MVTs with no corresponding LLVM type.
getDWordFromOffset now works directly with the original vector to get
the corresponding elements given the DWordOffset.
2. Improper bit tracking in CalculateByteProvider for vector types using
certain ops. Previously, bit tracking for certain ops (e.g.
ISD::TRUNCATE) assumed operands were scalar types, which is not correct
since these ops have different semantics depending on vector / scalar.
CalculateByteProvider / CalculateSrcByte now exit on vector types,
handling which is a TODO.
This allows working with e.g. v8i8 / v16i8 sources.
It is generally useful, but is primarily beneficial when allowing e.g. v8i8s to be passed to branches directly through registers. As such, this is the first in a series of patches to enable that work. However, it effects https://reviews.llvm.org/D155995, so it has been implemented on top of that.
Differential Revision: https://reviews.llvm.org/D159036
Change-Id: Idfcb57dacd0c32cab040fe4dd4ac2ec762750664
PR #66334 tried to renumber slot indexes before register allocation, but
the numbering was still affected by list entries for instructions which
had been erased. Fix this to make the register allocator's live range
length heuristics even less dependent on the history of how instructions
have been added to and removed from SlotIndexes's maps.
RegAllocGreedy uses SlotIndexes::getApproxInstrDistance to approximate
the length of a live range for its heuristics. Renumbering all slot
indexes with the default instruction distance ensures that this estimate
will be as accurate as possible, and will not depend on the history of
how instructions have been added to and removed from SlotIndexes's maps.
This also means that enabling -early-live-intervals, which runs the
SlotIndexes analysis earlier, will not cause large amounts of churn due
to different register allocator decisions.
Documentation for TargetLowering::getShiftAmountTy says that LegalTypes
should generally be true during type legalization, so this patch does
that.
On AMDGPU the effect is that we use i32 (a sane type) instead of i64
(pointer sized type) for more shift amounts, which in turn allows more
formation of rotates and funnel shifts pre-legalization.
Differential Revision: https://reviews.llvm.org/D154960
Occupancy is expressed as waves per SIMD. This means that we need to
take into account the number of SIMDs per "CU" or, to be more precise,
the number of SIMDs over which a workgroup may be distributed.
getOccupancyWithLocalMemSize was wrong because it didn't take SIMDs
into account at all.
At the same time, we need to take into account that WGP mode offers
access to a larger total amount of LDS, since this can affect how
non-power-of-two LDS allocations are rounded. To make this work
consistently, we distinguish between (available) local memory size and
addressable local memory size (which is always limited by 64kB on
gfx10+, even with WGP mode).
This change results in a massive amount of test churn. A lot of it is
caused by the fact that the default work group size is 1024, which means
that (due to rounding effects) the default occupancy on older hardware
is 8 instead of 10, which affects scheduling via register pressure
estimates. I've adjusted most tests by just running the UTC tools, but
in some cases I manually changed the work group size to 32 or 64 to make
sure that work group size chunkiness has no effect.
Differential Revision: https://reviews.llvm.org/D139468
If we can not prove that f16 operands of a buildvector are canonicalized, then we can not lower into a V_PACK. In this scenario, we would previously lower into some combination of and(sdwa), shr, or. This patch allows for matching into V_PERM instead.
Change-Id: Ifa4a74fdb81ef44f22ba490c7fdf81ec8aebc945
Add GFX11 test coverage to a bunch of tests where it was easy to do so,
mostly because the checks are autogenerated and/or GFX11 can share the
same checks as GFX10.
Differential Revision: https://reviews.llvm.org/D129295
Fold immediates regardless of how many uses they have. This is expected
to increase overall code size, but decrease register usage.
Differential Revision: https://reviews.llvm.org/D114644
Previously SIFoldOperands::foldInstOperand would only fold a
non-inlinable immediate into a single user, so as not to increase code
size by adding the same 32-bit literal operand to many instructions.
This patch removes that restriction, so that a non-inlinable immediate
will be folded into any number of users. The rationale is:
- It reduces the number of registers used for holding constant values,
which might increase occupancy. (On the other hand, many of these
registers are SGPRs which no longer affect occupancy on GFX10+.)
- It reduces ALU stalls between the instruction that loads a constant
into a register, and the instruction that uses it.
- The above benefits are expected to outweigh any increase in code size.
Differential Revision: https://reviews.llvm.org/D114643
If we're using shift pairs to mask, then relax the one use limit if the shift amounts are equal - we'll only be generating a single AND node.
AArch64 has a couple of regressions due to this, so I've enforced the existing one use limit inside a AArch64TargetLowering::shouldFoldConstantShiftPairToMask callback.
Part of the work to fix the regressions in D77804
Differential Revision: https://reviews.llvm.org/D125607
Pulled out of D77804 as its going to be easier to address the regressions individually.
This patch allows SimplifyDemandedBits to call SimplifyMultipleUseDemandedBits in cases where the source operand has other uses, enabling us to peek through the shifted value if we don't demand all the bits/elts.
The lost RISCV gorc2 fold shouldn't be a problem - instcombine would have already destroyed that pattern - see https://github.com/llvm/llvm-project/issues/50553
Differential Revision: https://reviews.llvm.org/D124839
As suggested by @foad on D124839
If we're extracting a vector element that originally came from a scalar_to_vector, then avoid the bitcasting of a vector type and perform the shift masking on the (any-extended) scalar source directly, making use of the fact that the upper elements of a scalar_to_vector are all undef.
Differential Revision: https://reviews.llvm.org/D125173
Using a BufferSize of one for memory ProcResources will result in better
ILP since it more accurately models the dependencies between memory ops
and their consumers on an in-order processor. After this change, the
scheduler will treat the data edges from loads as blocking so that
stalls are guaranteed when waiting for data to be retreaved from memory.
Since we don't actually track waitcnt here, this should do a better job
at modeling their behavior.
Practically, this means that the scheduler will trigger the 'STALL'
heuristic more often.
This type of change needs to be evaluated experimentally. Preliminary
results are positive.
Fixes: SWDEV-282962
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D114777
Change VOP_PAT_GEN to default to not generating an instruction selection
pattern for the VOP2 (e32) form of an instruction, only for the VOP3
(e64) form. This allows SIFoldOperands maximum freedom to fold copies
into the operands of an instruction, before SIShrinkInstructions tries
to shrink it back to the smaller encoding.
This affects the following VOP2 instructions:
v_min_i32
v_max_i32
v_min_u32
v_max_u32
v_and_b32
v_or_b32
v_xor_b32
v_lshr_b32
v_ashr_i32
v_lshl_b32
A further cleanup could simplify or remove VOP_PAT_GEN, since its
optional second argument is never used.
Differential Revision: https://reviews.llvm.org/D114252
Use GCNHazardRecognizer in postra sched.
Updated tests for the new schedules.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D109536
Change-Id: Ia86ba2ae168f12fb34b4d8efdab491f84d936cde
This is to allow 64 bit constant rematerialization. If a constant
is split into two separate moves initializing sub0 and sub1 like
now RA cannot rematerizalize a 64 bit register.
This gives 10-20% uplift in a set of huge apps heavily using double
precession math.
Fixes: SWDEV-292645
Differential Revision: https://reviews.llvm.org/D104874
Add SReg_224, VReg_224, AReg_224, etc.
Link 224-bit types with v7i32/v7f32.
Link existing 192-bit types to newly added v3i64/v3f64/v6i32/v6f32.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D104622
Support for XNACK and SRAMECC is not static on some GPUs. We must be able
to differentiate between different scenarios for these dynamic subtarget
features.
The possible settings are:
- Unsupported: The GPU has no support for XNACK/SRAMECC.
- Any: Preference is unspecified. Use conservative settings that can run anywhere.
- Off: Request support for XNACK/SRAMECC Off
- On: Request support for XNACK/SRAMECC On
GCNSubtarget will track the four options based on the following criteria. If
the subtarget does not support XNACK/SRAMECC we say the setting is
"Unsupported". If no subtarget features for XNACK/SRAMECC are requested we
must support "Any" mode. If the subtarget features XNACK/SRAMECC exist in the
feature string when initializing the subtarget, the settings are "On/Off".
The defaults are updated to be conservatively correct, meaning if no setting
for XNACK or SRAMECC is explicitly requested, defaults will be used which
generate code that can be run anywhere. This corresponds to the "Any" setting.
Differential Revision: https://reviews.llvm.org/D85882
Treat a non-atomic volatile load and store as a relaxed atomic at
system scope for the address spaces accessed. This will ensure all
relevant caches will be bypassed.
A volatile atomic is not changed and still only bypasses caches upto
the level specified by the SyncScope operand.
Differential Revision: https://reviews.llvm.org/D94214
- Add an internal option `-amdgpu-use-aa-in-codegen` to enable or
disable this feature. By Default, it's enabled.
Differential Revision: https://reviews.llvm.org/D89320
Change waitcnt insertion to check the memory operand tokens to see if
flat memory operations access VMEM in the same way it does to check if
accessing LDS. This avoids adding waitcnt for counters for address
spaces that are not accessed.
In addition, only generate the pessimistic waitcnt 0 if a flat memory
operation appears to access both VMEM and LDS.
This benefits flat memory operations that explicitly specify the
address space as GLOBAL or LOCAL.
Differential Revision: https://reviews.llvm.org/D89618
This tends to increase code size but more importantly it reduces vgpr
usage, and could avoid costly readfirstlanes if the result needs to be
in an sgpr.
Differential Revision: https://reviews.llvm.org/D88245
The previous implementation was incorrect, and based off incorrect
instruction definitions. Unfortunately we can't match natural
addressing in a lot of cases due to the shift/scale applied in
getelementptrs. This relies on reducing the 64-bit shift to 32-bits.
tryLatency compares two sched candidates. For the top zone it prefers
the one with lesser depth, but only if that depth is greater than the
total latency of the instructions we've already scheduled -- otherwise
its latency would be hidden and there would be no stall.
Unfortunately it only tests the depth of one of the candidates. This can
lead to situations where the TopDepthReduce heuristic does not kick in,
but a lower priority heuristic chooses the other candidate, whose depth
*is* greater than the already scheduled latency, which causes a stall.
The fix is to apply the heuristic if the depth of *either* candidate is
greater than the already scheduled latency.
All this also applies to the BotHeightReduce heuristic in the bottom
zone.
Differential Revision: https://reviews.llvm.org/D72392
This patch allows ISD::FSHR(i32) patterns to lower to ALIGNBIT instructions.
This improves test coverage of ISD::FSHR matching - x86 has both FSHL/FSHR instructions and we prefer FSHL by default.
Differential Revision: https://reviews.llvm.org/D76070
Summary:
pickNodeBidirectional tried to compare the best top candidate and the
best bottom candidate by examining TopCand.Reason and BotCand.Reason.
This is unsound because, after calling pickNodeFromQueue, Cand.Reason
does not reflect the most important reason why Cand was chosen. Rather
it reflects the most recent reason why it beat some other potential
candidate, which could have been for some low priority tie breaker
reason.
I have seen this cause problems where TopCand is a good candidate, but
because TopCand.Reason is ORDER (which is very low priority) it is
repeatedly ignored in favour of a mediocre BotCand. This is not how
bidirectional scheduling is supposed to work.
To fix this I changed the code to always compare TopCand and BotCand
directly, like the generic implementation of pickNodeBidirectional does.
This removes some uncommented AMDGPU-specific logic; if this logic turns
out to be important then perhaps it could be moved into an override of
tryCandidate instead.
Graphics shader benchmarking on gfx10 shows a lot more positive than
negative effects from this change.
Reviewers: arsenm, tstellar, rampitec, kzhuravl, vpykhtin, dstuttard, tpr, atrick, MatzeB
Subscribers: jvesely, wdng, nhaehnle, yaxunl, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68338
We are relying on atrificial DAG edges inserted by the
MemOpClusterMutation to keep loads and stores together in the
post-RA scheduler. This does not work all the time since it
allows to schedule a completely independent instruction in the
middle of the cluster.
Removed the DAG mutation and added pass to bundle already
clustered instructions. These bundles are unpacked before the
memory legalizer because it does not work with bundles but also
because it allows to insert waitcounts in the middle of a store
cluster.
Removing artificial edges also allows a more relaxed scheduling.
Differential Revision: https://reviews.llvm.org/D72737
Summary:
Incorrect code was generated when lowering insertelement operations
for vectors with 8 or 16 bit elements. The value being inserted was
not adjusted for the position of the element within the 32 bit word
and so only the low element within each 32 bit word could receive
the intended value.
Fixed by simply replicating the value to each element of a
congruent vector before the mask and or operation used to
update the intended element.
A number of affected LIT tests have been updated appropriately.
before the mask & or into the intended
Reviewers: arsenm, nhaehnle
Reviewed By: arsenm
Subscribers: llvm-commits, arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57588
llvm-svn: 352885
Add a pass to fixup various vector ISel issues.
Currently we handle converting GLOBAL_{LOAD|STORE}_*
and GLOBAL_Atomic_* instructions into their _SADDR variants.
This involves feeding the sreg into the saddr field of the new instruction.
llvm-svn: 347008
Summary: This change is the first part of the AMDGPU target description
change. The aim of it is the effective splitting the vector and scalar
flows at the selection stage. Selection uses predicate functions based
on the framework implemented earlier - https://reviews.llvm.org/D35267
Differential revision: https://reviews.llvm.org/D52019
Reviewers: rampitec
llvm-svn: 342719
This replaces most argument uses with loads, but for
now not all.
The code in SelectionDAG for calling convention lowering
is actively harmful for amdgpu_kernel. It attempts to
split the argument types into register legal types, which
results in low quality code for arbitary types. Since
all kernel arguments are passed in memory, we just want the
raw types.
I've tried a couple of methods of mitigating this in SelectionDAG,
but it's easier to just bypass this problem alltogether. It's
possible to hack around the problem in the initial lowering,
but the real problem is the DAG then expects to be able to use
CopyToReg/CopyFromReg for uses of the arguments outside the block.
Exposing the argument loads in the IR also has the advantage
that the LoadStoreVectorizer can merge them.
I'm not sure the best approach to dealing with the IR
argument list is. The patch as-is just leaves the IR arguments
in place, so all the existing code will still compute the same
kernarg size and pointlessly lowers the arguments.
Arguably the frontend should emit kernels with an empty argument
list in the first place. Alternatively a dummy array could be
inserted as a single argument just to reserve space.
This does have some disadvantages. Local pointer kernel arguments can
no longer have AssertZext placed on them as the equivalent !range
metadata is not valid on pointer typed loads. This is mostly bad
for SI which needs to know about the known bits in order to use the
DS instruction offset, so in this case this is not done.
More importantly, this skips noalias arguments since this pass
does not yet convert this to the equivalent !alias.scope and !noalias
metadata. Producing this metadata correctly seems to be tricky,
although this logically is the same as inlining into a function which
doesn't exist. Additionally, exposing these loads to the vectorizer
may result in degraded aliasing information if a pointer load is
merged with another argument load.
I'm also not entirely sure this is preserving the current clover
ABI, although I would greatly prefer if it would stop widening
arguments and match the HSA ABI. As-is I think it is extending
< 4-byte arguments to 4-bytes but doesn't align them to 4-bytes.
llvm-svn: 335650
This usually results in better code. Fixes using
inline asm with short2, and also fixes having a different
ABI for function parameters between VI and gfx9.
Partially cleans up the mess used for lowering of the d16
operations. Making v4f16 legal will help clean this up more,
but this requires additional work.
llvm-svn: 332953
