- Use computeMaxCallFrameSize() in PEI::calculateCallFrameInfo() instead of duplicating the code.
- Set AdjustsStack in FinalizeISel instead of in computeMaxCallFrameSize().
At the moment, the emergency spill slot is a fixed object for entry
functions and chain functions, and a regular stack object otherwise.
This patch adopts the latter behaviour for entry/chain functions too. It
seems this was always the intention [1] and it will also save us a bit
of stack space in cases where the first stack object has a large
alignment.
[1]
34c8b835b1
Similar to 806761a7629df268c8aed49657aeccffa6bca449.
For IR files without a target triple, -mtriple= specifies the full
target triple while -march= merely sets the architecture part of the
default target triple, leaving a target triple which may not make sense,
e.g. amdgpu-apple-darwin.
Therefore, -march= is error-prone and not recommended for tests without
a target triple. The issue has been benign as we recognize
$unknown-apple-darwin as ELF instead of rejecting it outrightly.
This patch changes AMDGPU tests to not rely on the default
OS/environment components. Tests that need fixes are not changed:
```
LLVM :: CodeGen/AMDGPU/fabs.f64.ll
LLVM :: CodeGen/AMDGPU/fabs.ll
LLVM :: CodeGen/AMDGPU/floor.ll
LLVM :: CodeGen/AMDGPU/fneg-fabs.f64.ll
LLVM :: CodeGen/AMDGPU/fneg-fabs.ll
LLVM :: CodeGen/AMDGPU/r600-infinite-loop-bug-while-reorganizing-vector.ll
LLVM :: CodeGen/AMDGPU/schedule-if-2.ll
```
We were allowing extra immediate arguments, and only bothering to check
if registers were implicit or not.
Also consolidate extra operand checks in verifier, to make this
testable. We had 3 different places checking if you were trying to build
an instruction with more operands than allowed by the definition. We had
an assertion in addOperand, a direct check in the MIRParser to avoid the
assertion, and the machine verifier checks. Remove the assert and parser
check so the verifier can provide a consistent verification experience,
which will also handle instructions modified in place.
This will represent functions with the amdgpu_cs_chain or
amdgpu_cs_chain_preserve calling conventions.
Differential Revision: https://reviews.llvm.org/D156410
Some opcodes in MIR are defined to be convergent by the target by setting
IsConvergent in the corresponding TD file. For example, in AMDGPU, the opcodes
G_SI_CALL and G_INTRINSIC* are marked as convergent. But this is too
conservative, since calls to functions that do not execute convergent operations
should not be marked convergent. This information is available in LLVM IR.
The new flag MIFlag::NoConvergent now allows the IR translator to mark an
instruction as not performing any convergent operations. It is relevant only on
occurrences of opcodes that are marked isConvergent in the target.
Differential Revision: https://reviews.llvm.org/D157475
This reverts commit a496c8be6e638ae58bb45f13113dbe3a4b7b23fd.
The workaround in c26dfc81e254c78dc23579cf3d1336f77249e1f6 should work
around the underlying problem with SUBREG_TO_REG.
And dependent commits.
Details in D150388.
This reverts commit 825b7f0ca5f2211ec3c93139f98d1e24048c225c.
This reverts commit 7a98f084c4d121244ef7286bc6503b6a181d446e.
This reverts commit b4a62b1fa546312d882fa12dfdcd015177d66826.
This reverts commit b7836d856206ec39509d42529f958c920368166b.
No conflicts in the code, few tests had conflicts in autogenerated CHECKs:
llvm/test/CodeGen/Thumb2/mve-float32regloops.ll
llvm/test/CodeGen/AMDGPU/fix-frame-reg-in-custom-csr-spills.ll
Reviewed By: alexfh
Differential Revision: https://reviews.llvm.org/D156381
ProgrammersManual.html says
> StringMap iteration order, however, is not guaranteed to be deterministic, so any uses which require that should instead use a std::map.
This patch makes -DLLVM_REVERSE_ITERATION=on (currently
-DLLVM_ENABLE_REVERSE_ITERATION=on works as well) shuffle StringMap
iteration order (actually flipping the hash so that elements not in the
same bucket are reversed) to catch violations, similar to D35043 for
DenseMap. This should help change the hash function (e.g., D142862,
D155781).
With a lot of fixes, there are still some violations. This patch
implements the "reverse_iteration" lit feature to skip such tests.
Eventually we should remove this feature.
`ninja check-{llvm,clang,clang-tools}` are clean with
`#define LLVM_ENABLE_REVERSE_ITERATION 1`.
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D155789
Currently, the custom SGPR spill lowering pass spills
SGPRs into physical VGPR lanes and the remaining VGPRs
are used by regalloc for vector regclass allocation.
This imposes many restrictions that we ended up with
unsuccessful SGPR spilling when there won't be enough
VGPRs and we are forced to spill the leftover into
memory during PEI. The custom spill handling during PEI
has many edge cases and often breaks the compiler time
to time.
This patch implements spilling SGPRs into virtual VGPR
lanes. Since we now split the register allocation for
SGPRs and VGPRs, the virtual registers introduced for
the spill lanes would get allocated automatically in
the subsequent regalloc invocation for VGPRs.
Spill to virtual registers will always be successful,
even in the high-pressure situations, and hence it avoids
most of the edge cases during PEI. We are now left with
only the custom SGPR spills during PEI for special registers
like the frame pointer which is an unproblematic case.
Differential Revision: https://reviews.llvm.org/D124196
To reduce the register pressure during allocation,
when the allocator spills a virtual register that
corresponds to a whole wave mode operation, the
spill loads and restores should be activated for
all lanes by temporarily flipping all bits in exec
register to one just before the spills. It is not
implemented in the compiler as of today and this
patch enables the necessary support.
This is a pre-patch before the SGPR spill to virtual
VGPR lanes that would eventually causes the whole
wave register spills during allocation.
Reviewed By: arsenm, cdevadas
Differential Revision: https://reviews.llvm.org/D143759
Branch relaxation requires 2 additional SGPRs for AMDGPU to handle the
case when an indirect branch target is too far away. The register
scavanger may not find available registers, which causes a “did not find
scavenging index” assert to occur in assignRegToScavengingIndex.
In this patch, we estimate before register allocation whether an
indirect branch is likely to be needed, and reserve 2 SGPRs if the
branch distance is found to be above a threshold. The distance threshold
is an approximation as the exact code size and branch distance are
unknown prior to register allocation.
Patch by Corbin Robeck. Thanks!
Differential Review: https://reviews.llvm.org/D149775
1. Remove the existing code that would encode the constant offsets (if
there were any) on buffer intrinsic operations onto their
`MachineMemOperand`s. As far as I can tell, this use of `offset` has
no substantial impact on the generated code, especially since the same
reasoning is performed by areMemAccessesTriviallyDisjoint().
2. When a buffer resource intrinsic takes a pointer argument as the
base resource/descriptor, place that memory argument in the value
field of the MachineMemOperand attached to that intrinsic.
This is more conservative than what would be produced by more typical
LLVM code using GEP, as the Value (for alias analysis purposes)
corresponding to accessing buffer[0] and buffer[1] is the same.
However, the target-specific analysis of disjoint offsets covers a lot
of the simple usecases.
Despite this limitation, the new buffer intrinsics, combined with
LLVM's existing pointer annotations, allow for non-trivial
optimizations, as seen in the new tests, where marking two buffer
descriptors "noalias" allows merging together loads and stores in a
"load from A, modify loaded value, store to B" sequence, which would
not be possible previously.
Depends on D147547
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D148184
In order to enable the LLVM frontend to better analyze buffer
operations (and to potentially enable more precise analyses on the
backend), define versions of the raw and structured buffer intrinsics
that use `ptr addrspace(8)` instead of `<4 x i32>` to represent their
rsrc arguments.
The new intrinsics are named by replacing `buffer.` with `buffer.ptr`.
One advantage to these intrinsic definitions is that, instead of
specifying that a buffer load/store will read/write some memory, we
can indicate that the memory read or written will be based on the
pointer argument. This means that, for example, a read from a
`noalias` buffer can be pulled out of a loop that is modifying a
distinct buffer.
In the future, we will define custom PseudoSourceValues that will
allow us to package up the (buffer, index, offset) triples that buffer
intrinsics contain and allow for more precise backend analysis.
This work also enables creating address space 7, which represents
manipulation of raw buffers using native LLVM load and store
instructions.
Where tests simply used a buffer intrinsic while testing some other
code path (such as the tests for VGPR spills), they have been updated
to use the new intrinsic form. Tests that are "about" buffer
intrinsics (for instance, those that ensure that they codegen as
expected) have been duplicated, either within existing files or into
new ones.
Depends on D145441
Reviewed By: arsenm, #amdgpu
Differential Revision: https://reviews.llvm.org/D147547
This is a follow-up to b71edfaa4ec3c998aadb35255ce2f60bba2940b0
since I forgot the lit.local.cfg files in that one.
Reformatting is done with `black`.
If you end up having problems merging this commit because you
have made changes to a python file, the best way to handle that
is to run git checkout --ours <yourfile> and then reformat it
with black.
If you run into any problems, post to discourse about it and
we will try to help.
RFC Thread below:
https://discourse.llvm.org/t/rfc-document-and-standardize-python-code-style
Reviewed By: barannikov88, kwk
Differential Revision: https://reviews.llvm.org/D150762
Re-land D145441 with data layout upgrade code fixed to not break OpenMP.
This reverts commit 3f2fbe92d0f40bcb46db7636db9ec3f7e7899b27.
Differential Revision: https://reviews.llvm.org/D149776
Per discussion at
https://discourse.llvm.org/t/representing-buffer-descriptors-in-the-amdgpu-target-call-for-suggestions/68798,
we define two new address spaces for AMDGCN targets.
The first is address space 7, a non-integral address space (which was
already in the data layout) that has 160-bit pointers (which are
256-bit aligned) and uses a 32-bit offset. These pointers combine a
128-bit buffer descriptor and a 32-bit offset, and will be usable with
normal LLVM operations (load, store, GEP). However, they will be
rewritten out of existence before code generation.
The second of these is address space 8, the address space for "buffer
resources". These will be used to represent the resource arguments to
buffer instructions, and new buffer intrinsics will be defined that
take them instead of <4 x i32> as resource arguments. ptr
addrspace(8). These pointers are 128-bits long (with the same
alignment). They must not be used as the arguments to getelementptr or
otherwise used in address computations, since they can have
arbitrarily complex inherent addressing semantics that can't be
represented in LLVM. Even though, like their address space 7 cousins,
these pointers have deterministic ptrtoint/inttoptr semantics, they
are defined to be non-integral in order to prevent optimizations that
rely on pointers being a [0, [addr_max]] value from applying to them.
Future work includes:
- Defining new buffer intrinsics that take ptr addrspace(8) resources.
- A late rewrite to turn address space 7 operations into buffer
intrinsics and offset computations.
This commit also updates the "fallback address space" for buffer
intrinsics to the buffer resource, and updates the alias analysis
table.
Depends on D143437
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D145441
Occupancy is expressed as waves per SIMD. This means that we need to
take into account the number of SIMDs per "CU" or, to be more precise,
the number of SIMDs over which a workgroup may be distributed.
getOccupancyWithLocalMemSize was wrong because it didn't take SIMDs
into account at all.
At the same time, we need to take into account that WGP mode offers
access to a larger total amount of LDS, since this can affect how
non-power-of-two LDS allocations are rounded. To make this work
consistently, we distinguish between (available) local memory size and
addressable local memory size (which is always limited by 64kB on
gfx10+, even with WGP mode).
This change results in a massive amount of test churn. A lot of it is
caused by the fact that the default work group size is 1024, which means
that (due to rounding effects) the default occupancy on older hardware
is 8 instead of 10, which affects scheduling via register pressure
estimates. I've adjusted most tests by just running the UTC tools, but
in some cases I manually changed the work group size to 32 or 64 to make
sure that work group size chunkiness has no effect.
Differential Revision: https://reviews.llvm.org/D139468
Currently, the custom SGPR spill lowering pass spills
SGPRs into physical VGPR lanes and the remaining VGPRs
are used by regalloc for vector regclass allocation.
This imposes many restrictions that we ended up with
unsuccessful SGPR spilling when there won't be enough
VGPRs and we are forced to spill the leftover into
memory during PEI. The custom spill handling during PEI
has many edge cases and often breaks the compiler time
to time.
This patch implements spilling SGPRs into virtual VGPR
lanes. Since we now split the register allocation for
SGPRs and VGPRs, the virtual registers introduced for
the spill lanes would get allocated automatically in
the subsequent regalloc invocation for VGPRs.
Spill to virtual registers will always be successful,
even in the high-pressure situations, and hence it avoids
most of the edge cases during PEI. We are now left with
only the custom SGPR spills during PEI for special registers
like the frame pointer which isn an unproblematic case.
This patch also implements the whole wave spills which
might occur if RA spills any live range of virtual registers
involved in the whole wave operations. Earlier, we had
been hand-picking registers for such machine operands.
But now with SGPR spills into virtual VGPR lanes, we are
exposing them to the allocator.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D124196
Following up on the removal of BufferPSV in commit 43b86bf992 ("AMDGPU:
Remove BufferPseudoSourceValue")
It is unclear what exactly the right address space for images should be.
They seem morally closest to buffers, so that's what I went with. In
practical terms, address space 7 is better than address space 0 because
it can't alias with LDS.
Differential Revision: https://reviews.llvm.org/D138949
The use of a PSV for buffer intrinsics is misleading because it may be
misinterpreted as all buffer intrinsics accessing the same address in
memory, which is clearly not true.
Instead, build MachineMemOperands without a pointer value but with an
address space, so that address space-based alias analysis can still
work.
There is a lot of test churn because previously address space 4
(constant address space) was used as an address space for buffer
intrinsics. This doesn't make much sense and seems to have been an
accident -- see the change in
AMDGPUTargetMachine::getAddressSpaceForPseudoSourceKind.
Differential Revision: https://reviews.llvm.org/D138711
D121929 happens to cause CodeGen/MIR/AArch64/mirnamer.mir to fail due
to a hash collision caused by adding two extra opcodes. The collision
is only in the top 19 bits of the hashed opcode so fix this by just
using the whole hash (in fixed width hex for consistency) instead of
the top 5 decimal digits.
Differential Revision: https://reviews.llvm.org/D137155
Implement an intrinsic for use lowering LDS variables to different
addresses from different kernels. This will allow kernels that cannot
reach an LDS variable to avoid wasting space for it.
There are a number of implicit arguments accessed by intrinsic already
so this implementation closely follows the existing handling. It is slightly
novel in that this SGPR is written by the kernel prologue.
It is necessary in the general case to put variables at different addresses
such that they can be compactly allocated and thus necessary for an
indirect function call to have some means of determining where a
given variable was allocated. Claiming an arbitrary SGPR into which
an integer can be written by the kernel, in this implementation based
on metadata associated with that kernel, which is then passed on to
indirect call sites is sufficient to determine the variable address.
The intent is to emit a __const array of LDS addresses and index into it.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D125060
Rename CalleeSavedRegs defs to avoid being overly specific:
* CSR_AMDGPU_AGPRs_32_255 => CSR_AMDGPU_AGPRs
* CSR_AMDGPU_SGPRs_30_31 + CSR_AMDGPU_SGPRs_32_105 => CSR_AMDGPU_SGPRs
* CSR_AMDGPU_SI_Gfx_SGPRs_4_29 + CSR_AMDGPU_SI_Gfx_SGPRs_64_105 =>
CSR_AMDGPU_SI_Gfx_SGPRs
* CSR_AMDGPU_HighRegs => CSR_AMDGPU
* CSR_AMDGPU_HighRegs_With_AGPRs => CSR_AMDGPU_GFX90AInsts
* CSR_AMDGPU_SI_Gfx_With_AGPRs => CSR_AMDGPU_SI_Gfx_GFX90AInsts
Introduce a class RegMask to mark the cases where we use the
CalleeSavedRegs class purely as an expedient way to produce a mask.
Update the names of these masks to not mention "CSR". Other targets also
seem to do this, so a reasonable alternative is to actually update
table-gen to include a new class to do this explicitly, but the current
approach seems harmless so I opted to just make it more explicit.
Reviewed By: arsenm, sebastian-ne
Differential Revision: https://reviews.llvm.org/D109008
These don't seem to be very well used or tested, but try to make the
behavior a bit more consistent with LDS globals.
I'm not sure what the definition for amdgpu-gds-size is supposed to
mean. For now I assumed it's allocating a static size at the beginning
of the allocation, and any known globals are allocated after it.
Currently the return address ABI registers s[30:31], which fall in the call
clobbered register range, are added as a live-in on the function entry to
preserve its value when we have calls so that it gets saved and restored
around the calls.
But the DWARF unwind information (CFI) needs to track where the return address
resides in a frame and the above approach makes it difficult to track the
return address when the CFI information is emitted during the frame lowering,
due to the involvment of understanding the control flow.
This patch moves the return address ABI registers s[30:31] into callee saved
registers range and stops adding live-in for return address registers, so that
the CFI machinery will know where the return address resides when CSR
save/restore happen during the frame lowering.
And doing the above poses an issue that now the return instruction uses undefined
register `sgpr30_sgpr31`. This is resolved by hiding the return address register
use by the return instruction through the `SI_RETURN` pseudo instruction, which
doesn't take any input operands, until the `SI_RETURN` pseudo gets lowered to the
`S_SETPC_B64_return` during the `expandPostRAPseudo()`.
As an added benefit, this patch simplifies overall return instruction handling.
Note: The AMDGPU CFI changes are there only in the downstream code and another
version of this patch will be posted for review for the downstream code.
Reviewed By: arsenm, ronlieb
Differential Revision: https://reviews.llvm.org/D114652
This allows us to set the noclobber flag on (the MMO of) a load
instruction instead of on the pointer. This fixes a bug where noclobber
was being applied to all loads from the same pointer, even if some of
them were clobbered.
Differential Revision: https://reviews.llvm.org/D118775
Currently the return address ABI registers s[30:31], which fall in the call
clobbered register range, are added as a live-in on the function entry to
preserve its value when we have calls so that it gets saved and restored
around the calls.
But the DWARF unwind information (CFI) needs to track where the return address
resides in a frame and the above approach makes it difficult to track the
return address when the CFI information is emitted during the frame lowering,
due to the involvment of understanding the control flow.
This patch moves the return address ABI registers s[30:31] into callee saved
registers range and stops adding live-in for return address registers, so that
the CFI machinery will know where the return address resides when CSR
save/restore happen during the frame lowering.
And doing the above poses an issue that now the return instruction uses undefined
register `sgpr30_sgpr31`. This is resolved by hiding the return address register
use by the return instruction through the `SI_RETURN` pseudo instruction, which
doesn't take any input operands, until the `SI_RETURN` pseudo gets lowered to the
`S_SETPC_B64_return` during the `expandPostRAPseudo()`.
As an added benefit, this patch simplifies overall return instruction handling.
Note: The AMDGPU CFI changes are there only in the downstream code and another
version of this patch will be posted for review for the downstream code.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D114652
Code using indirect calls is broken without this, and there isn't
really much value in supporting the old attempt to vary the argument
placement based on uses. This resulted in more argument shuffling code
anyway.
Also have the option stop implying all inputs need to be passed. This
will no rely on the amdgpu-no-* attributes to avoid passing
unnecessary values.
Previously we assumed all callable functions did not need any
implicitly passed inputs, and added attributes to functions to
indicate when they were necessary. Requiring attributes for
correctness is pretty ugly, and it makes supporting indirect and
external calls more complicated.
This inverts the direction of the attributes, so an undecorated
function is assumed to need all implicit imputs. This enables
AMDGPUAttributor by default to mark when functions are proven to not
need a given input. This strips the equivalent functionality from the
legacy AMDGPUAnnotateKernelFeatures pass.
However, AMDGPUAnnotateKernelFeatures is not fully removed at this
point although it should be in the future. It is still necessary for
the two hacky amdgpu-calls and amdgpu-stack-objects attributes, which
would be better served by a trivial analysis on the IR during
selection. Additionally, AMDGPUAnnotateKernelFeatures still
redundantly handles the uniform-work-group-size attribute to be
removed in a future commit.
At this point when not using -amdgpu-fixed-function-abi, we are still
modifying the ABI based on these newly negated attributes. In the
future, this option will be removed and the locations for implicit
inputs will always be fixed. We will then use the new attributes to
avoid passing the values when unnecessary.
