R_RISCV_CALL/R_RISCV_CALL_PLT distinction is not necessary and
R_RISCV_CALL has been deprecated. Since https://reviews.llvm.org/D132530
`call foo` assembles to R_RISCV_CALL_PLT. The `@plt` suffix is not
useful and can be removed now (matching AArch64 and PowerPC).
GNU assembler assembles `call foo` to RISCV_CALL_PLT since 2022-09
(70f35d72ef04cd23771875c1661c9975044a749c).
Without this patch, unconditionally changing MO_CALL to MO_PLT could
create `jump .L1@plt, a0`, which is invalid in LLVM integrated assembler
and GNU assembler.
After 47a1704ac94c8aeb1aa7e0fc438ff99d36b632c6 we are able to
reassociate a disjoint Or used as a GEP index to get the constant
closer to a load to fold it. This is show by the first test.
We are not able to do this if the GEP created a shift left to scale
the index as the second test shows.
To make this work, we need to preserve the disjoint flag when pulling
the Or through the shift.
When AMOs are used to implement parallel reduction operations, typically the return value would be discarded.
This patch adds a peephole pass `RISCVDeadRegisterDefinitions`. It rewrites `rd` to `x0` when `rd` is marked as dead.
It may improve the register allocation and reduce pipeline hazards on CPUs without register renaming and OOO.
Comparison with GCC: https://godbolt.org/z/bKaxnEcec
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D158759
The Zcb extension has c.lbu, but not c.lb. This patch makes us
prefer LBU over LB if we have a choice which will enable more
compression opportunities.
Reviewed By: asb
Differential Revision: https://reviews.llvm.org/D146270
Offsets in the range [-4095,-2049] or [2048, 4094] are split into
two ADDIs. One of the ADDIs will be folded into the load/store
immediate through an post-isel peephole.
If the imm is out of range for an ADDI, we will materialize it in
a register using multiple instructions. If the ADD is used by a
load/store, doPeepholeLoadStoreADDI can try to pull an ADDI from
the constant materialization into the load/store offset. This only
works if the ADD has a single use, otherwise the peephole would have
to rebuild multiple nodes.
This patch instead tries to solve the problem when the add is selected.
We check that the add is only used by loads/stores and if it is
we will select it to (ADDI (ADD X, Imm-Lo12), Lo12). This will enable
the simple case in doPeepholeLoadStoreADDI that can bypass an ADDI
used as a pointer. As a result we can remove the more complicated
peephole from doPeepholeLoadStoreADDI.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D126576
When lowering GlobalAddressNodes, we were removing a non-zero offset and
creating a separate ADD.
It already comes out of SelectionDAGBuilder with a separate ADD. The
ADD was being removed by DAGCombiner.
This patch disables the DAG combine so we don't have to reverse it.
Test changes all look to be instruction order changes. Probably due
to different DAG node ordering.
Differential Revision: https://reviews.llvm.org/D126558
This is a followup to D124231.
We can fold the ADDIW in this pattern if we can prove that LUI+ADDI
would have produced the same result as LUI+ADDIW.
This pattern occurs because constant materialization prefers LUI+ADDIW
for all simm32 immediates. Only immediates in the range
0x7ffff800-0x7fffffff require an ADDIW. Other simm32 immediates
work with LUI+ADDI.
Reviewed By: asb
Differential Revision: https://reviews.llvm.org/D124693
This fixes a crash from D124231.
We can't fold
(load (add base, (addi src, off1)), off2)
-> (load (add base, src), off1+off2)
if the src is a FrameIndex. FrameIndex cannot be the operand of an
add.
There was an immediate==0 check that I think was trying to catch
the common case of FrameIndex addis where the immediate is 0, but
they can also appear in non-zero form. Instead explicitly check
for a FrameIndex operand.
Most of the test changes are trivial instruction reorderings and differing
register allocations, without any obvious performance impact.
Differential Revision: https://reviews.llvm.org/D66973
llvm-svn: 372106
Summary:
When lowering global address, lower the base as a TargetGlobal first then
create an SDNode for the offset separately and chain it to the address calculation
This optimization will create a DAG where the base address of a global access will
be reused between different access. The offset can later be folded into the immediate
part of the memory access instruction.
With this optimization we generate:
lui a0, %hi(s)
addi a0, a0, %lo(s) ; shared base address.
addi a1, zero, 20 ; 2 instructions per access.
sw a1, 44(a0)
addi a1, zero, 10
sw a1, 8(a0)
addi a1, zero, 30
sw a1, 80(a0)
Instead of:
lui a0, %hi(s+44) ; 3 instructions per access.
addi a1, zero, 20
sw a1, %lo(s+44)(a0)
lui a0, %hi(s+8)
addi a1, zero, 10
sw a1, %lo(s+8)(a0)
lui a0, %hi(s+80)
addi a1, zero, 30
sw a1, %lo(s+80)(a0)
Which will save one instruction per access.
Reviewers: asb, apazos
Reviewed By: asb
Subscribers: rbar, johnrusso, simoncook, jordy.potman.lists, niosHD, kito-cheng, shiva0217, zzheng, edward-jones, mgrang, apazos, asb, llvm-commits
Differential Revision: https://reviews.llvm.org/D46989
llvm-svn: 332641
This patch switches the default for -riscv-no-aliases to false
and updates all affected MC and CodeGen tests. As recommended in
D41071, MC tests use the canonical instructions and the CodeGen
tests use the aliases.
Additionally, for the f and d instructions with rounding mode,
the tests for the aliased versions are moved and tightened such
that they can actually detect if alias emission is enabled.
(see D40902 for context)
Differential Revision: https://reviews.llvm.org/D41225
Patch by Mario Werner.
llvm-svn: 320797
As frame pointer elimination isn't implemented until a later patch and we make
extensive use of update_llc_test_checks.py, this changes touches a lot of the
RISC-V tests.
Differential Revision: https://reviews.llvm.org/D39849
llvm-svn: 320357
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
This required the implementation of RISCVTargetInstrInfo::copyPhysReg. Support
for lowering global addresses follow in the next patch.
Differential Revision: https://reviews.llvm.org/D29934
llvm-svn: 317685
