IR is now always parsed in opaque pointer mode, unless
-opaque-pointers=0 is explicitly given. There is no automatic
detection of typed pointers anymore.
The -opaque-pointers=0 option is added to any remaining IR tests
that haven't been migrated yet.
Differential Revision: https://reviews.llvm.org/D141912
For below case, virtual register is defined twice in the self loop. We
don't need to spill %0 after the third instruction `%0 = def (tied %0)`,
because it is defined in the second instruction `%0 = def`.
1 bb.1
2 %0 = def
3 %0 = def (tied %0)
4 ...
5 jmp bb.1
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D125079
This adds support for pointer types for `atomic xchg` and let us write
instructions such as `atomicrmw xchg i64** %0, i64* %1 seq_cst`. This
is similar to the patch for allowing atomicrmw xchg on floating point
types: https://reviews.llvm.org/D52416.
Differential Revision: https://reviews.llvm.org/D124728
The current FastISel code reuses the register for a bitcast that
doesn't change the IR type, but uses a reg-to-reg copy if it
changes the IR type without changing the MVT. However, we can
simply reuse the register in that case as well.
In particular, this avoids unnecessary reg-to-reg copies for pointer
bitcasts. This was found while inspecting O0 codegen differences
between typed and opaque pointers.
Differential Revision: https://reviews.llvm.org/D119432
The motivation is that the update script has at least two deviations
(`<...>@GOT`/`<...>@PLT`/ and not hiding pointer arithmetics) from
what pretty much all the checklines were generated with,
and most of the tests are still not updated, so each time one of the
non-up-to-date tests is updated to see the effect of the code change,
there is a lot of noise. Instead of having to deal with that each
time, let's just deal with everything at once.
This has been done via:
```
cd llvm-project/llvm/test/CodeGen/X86
grep -rl "; NOTE: Assertions have been autogenerated by utils/update_llc_test_checks.py" | xargs -L1 <...>/llvm-project/llvm/utils/update_llc_test_checks.py --llc-binary <...>/llvm-project/build/bin/llc
```
Not all tests were regenerated, however.
Local values are constants or addresses that can't be folded into
the instruction that uses them. FastISel materializes these in a
"local value" area that always dominates the current insertion
point, to try to avoid materializing these values more than once
(per block).
https://reviews.llvm.org/D43093 added code to sink these local
value instructions to their first use, which has two beneficial
effects. One, it is likely to avoid some unnecessary spills and
reloads; two, it allows us to attach the debug location of the
user to the local value instruction. The latter effect can
improve the debugging experience for debuggers with a "set next
statement" feature, such as the Visual Studio debugger and PS4
debugger, because instructions to set up constants for a given
statement will be associated with the appropriate source line.
There are also some constants (primarily addresses) that could be
produced by no-op casts or GEP instructions; the main difference
from "local value" instructions is that these are values from
separate IR instructions, and therefore could have multiple users
across multiple basic blocks. D43093 avoided sinking these, even
though they were emitted to the same "local value" area as the
other instructions. The patch comment for D43093 states:
Local values may also be used by no-op casts, which adds the
register to the RegFixups table. Without reversing the RegFixups
map direction, we don't have enough information to sink these
instructions.
This patch undoes most of D43093, and instead flushes the local
value map after(*) every IR instruction, using that instruction's
debug location. This avoids sometimes incorrect locations used
previously, and emits instructions in a more natural order.
In addition, constants materialized due to PHI instructions are
not assigned a debug location immediately; instead, when the
local value map is flushed, if the first local value instruction
has no debug location, it is given the same location as the
first non-local-value-map instruction. This prevents PHIs
from introducing unattributed instructions, which would either
be implicitly attributed to the location for the preceding IR
instruction, or given line 0 if they are at the beginning of
a machine basic block. Neither of those consequences is good
for debugging.
This does mean materialized values are not re-used across IR
instruction boundaries; however, only about 5% of those values
were reused in an experimental self-build of clang.
(*) Actually, just prior to the next instruction. It seems like
it would be cleaner the other way, but I was having trouble
getting that to work.
This reapplies commits cf1c774d and dc35368c, and adds the
modification to PHI handling, which should avoid problems
with debugging under gdb.
Differential Revision: https://reviews.llvm.org/D91734
They are currently implicit because TargetMachine::shouldAssumeDSOLocal implies
dso_local.
For external data, clang -fno-pic emits the dso_local specifier for ELF and
non-MinGW COFF. Adding explicit dso_local makes these tests in align with the
clang behavior and helps implementing an option to use GOT indirection for
external data access in -fno-pic mode (to avoid copy relocations).
This reverts commit cf1c774d6ace59c5adc9ab71b31e762c1be695b1.
This change caused several regressions in the gdb test suite - at least
a sample of which was due to line zero instructions making breakpoints
un-lined. I think they're worth investigating/understanding more (&
possibly addressing) before moving forward with this change.
Revert "[FastISel] NFC: Clean up unnecessary bookkeeping"
This reverts commit 3fd39d3694d32efa44242c099e923a7f4d982095.
Revert "[FastISel] NFC: Remove obsolete -fast-isel-sink-local-values option"
This reverts commit a474657e30edccd9e175d92bddeefcfa544751b2.
Revert "Remove static function unused after cf1c774."
This reverts commit dc35368ccf17a7dca0874ace7490cc3836fb063f.
Revert "[lldb] Fix TestThreadStepOut.py after "Flush local value map on every instruction""
This reverts commit 53a14a47ee89dadb8798ca8ed19848f33f4551d5.
Local values are constants or addresses that can't be folded into
the instruction that uses them. FastISel materializes these in a
"local value" area that always dominates the current insertion
point, to try to avoid materializing these values more than once
(per block).
https://reviews.llvm.org/D43093 added code to sink these local
value instructions to their first use, which has two beneficial
effects. One, it is likely to avoid some unnecessary spills and
reloads; two, it allows us to attach the debug location of the
user to the local value instruction. The latter effect can
improve the debugging experience for debuggers with a "set next
statement" feature, such as the Visual Studio debugger and PS4
debugger, because instructions to set up constants for a given
statement will be associated with the appropriate source line.
There are also some constants (primarily addresses) that could be
produced by no-op casts or GEP instructions; the main difference
from "local value" instructions is that these are values from
separate IR instructions, and therefore could have multiple users
across multiple basic blocks. D43093 avoided sinking these, even
though they were emitted to the same "local value" area as the
other instructions. The patch comment for D43093 states:
Local values may also be used by no-op casts, which adds the
register to the RegFixups table. Without reversing the RegFixups
map direction, we don't have enough information to sink these
instructions.
This patch undoes most of D43093, and instead flushes the local
value map after(*) every IR instruction, using that instruction's
debug location. This avoids sometimes incorrect locations used
previously, and emits instructions in a more natural order.
This does mean materialized values are not re-used across IR
instruction boundaries; however, only about 5% of those values
were reused in an experimental self-build of clang.
(*) Actually, just prior to the next instruction. It seems like
it would be cleaner the other way, but I was having trouble
getting that to work.
Differential Revision: https://reviews.llvm.org/D91734
This rewrites big parts of the fast register allocator. The basic
strategy of doing block-local allocation hasn't changed but I tweaked
several details:
Track register state on register units instead of physical
registers. This simplifies and speeds up handling of register aliases.
Process basic blocks in reverse order: Definitions are known to end
register livetimes when walking backwards (contrary when walking
forward then uses may or may not be a kill so we need heuristics).
Check register mask operands (calls) instead of conservatively
assuming everything is clobbered. Enhance heuristics to detect
killing uses: In case of a small number of defs/uses check if they are
all in the same basic block and if so the last one is a killing use.
Enhance heuristic for copy-coalescing through hinting: We check the
first k defs of a register for COPYs rather than relying on there just
being a single definition. When testing this on the full llvm
test-suite including SPEC externals I measured:
average 5.1% reduction in code size for X86, 4.9% reduction in code on
aarch64. (ranging between 0% and 20% depending on the test) 0.5%
faster compiletime (some analysis suggests the pass is slightly slower
than before, but we more than make up for it because later passes are
faster with the reduced instruction count)
Also adds a few testcases that were broken without this patch, in
particular bug 47278.
Patch mostly by Matthias Braun
The regressions this caused should be fixed when
https://reviews.llvm.org/D52010 is applied.
This reverts commit a21387c65470417c58021f8d3194a4510bb64f46.
This seems to have caused incorrect register allocation in some cases,
breaking tests in the Zig standard library (PR47278).
As discussed on the bug, revert back to green for now.
> Record internal state based on register units. This is often more
> efficient as there are typically fewer register units to update
> compared to iterating over all the aliases of a register.
>
> Original patch by Matthias Braun, but I've been rebasing and fixing it
> for almost 2 years and fixed a few bugs causing intermediate failures
> to make this patch independent of the changes in
> https://reviews.llvm.org/D52010.
This reverts commit 66251f7e1de79a7c1620659b7f58352b8c8e892e, and
follow-ups 931a68f26b9a3de853807ffad7b2cd0a2dd30922
and 0671a4c5087d40450603d9d26cf239f1a8b1367e. It also adjust some
test expectations.
Previously the transform was doing these two canonicalizations
(x > y) ? x : y -> (x >= y) ? x : y
(x < y) ? x : y -> (x <= y) ? x : y
But those don't seem to be useful generally. And they actively
pessimize the cases in PR47049.
This patch limits it to
(x > 0) ? x : 0 -> (x >= 0) ? x : 0
(x < -1) ? x : -1 -> (x <= -1) ? x : -1
These are the cases mentioned in the comments as the motivation
for the canonicalization. These allow the CMOV to use the S
flag from the compare thus improving opportunities to use a TEST
or the flags from an arithmetic instruction.
Record internal state based on register units. This is often more
efficient as there are typically fewer register units to update
compared to iterating over all the aliases of a register.
Original patch by Matthias Braun, but I've been rebasing and fixing it
for almost 2 years and fixed a few bugs causing intermediate failures
to make this patch independent of the changes in
https://reviews.llvm.org/D52010.
CMPXCHG8B was introduced on i586/pentium generation.
If its not enabled, limit the atomic width to 32 bits so the AtomicExpandPass will expand to lib calls. Unclear if we should be using a different limit for other configs. The default is 1024 and experimentation shows that using an i256 atomic will cause a crash in SelectionDAG.
Differential Revision: https://reviews.llvm.org/D59576
llvm-svn: 356631
`llc -march` is problematic because it only switches the target
architecture, but leaves the operating system unchanged. This
occasionally leads to indeterministic tests because the OS from
LLVM_DEFAULT_TARGET_TRIPLE is used.
However we can simply always use `llc -mtriple` instead. This changes
all the tests to do this to avoid people using -march when they copy and
paste parts of tests.
See also the discussion in https://reviews.llvm.org/D35287
llvm-svn: 309774
Previously the patterns didn't have high enough priority and we would only use the GR32 form if the only the upper 32 or 56 bits were zero.
Fixes PR23100.
llvm-svn: 234075
The logic for expanding atomics that aren't natively supported in
terms of cmpxchg loops is much simpler to express at the IR level. It
also allows the normal optimisations and CodeGen improvements to help
out with atomics, instead of using a limited set of possible
instructions..
rdar://problem/13496295
llvm-svn: 212119
The syntax for "cmpxchg" should now look something like:
cmpxchg i32* %addr, i32 42, i32 3 acquire monotonic
where the second ordering argument gives the required semantics in the case
that no exchange takes place. It should be no stronger than the first ordering
constraint and cannot be either "release" or "acq_rel" (since no store will
have taken place).
rdar://problem/15996804
llvm-svn: 203559
- Clear 'mayStore' flag when loading from the atomic variable before the
spin loop
- Clear kill flag from one use to multiple use in registers forming the
address to that atomic variable
- don't use a physical register as live-in register in BB (neither entry
nor landing pad.) by copying it into virtual register
(patch by Cameron Zwarich)
llvm-svn: 176538
- Rewrite/merge pseudo-atomic instruction emitters to address the
following issue:
* Reduce one unnecessary load in spin-loop
previously the spin-loop looks like
thisMBB:
newMBB:
ld t1 = [bitinstr.addr]
op t2 = t1, [bitinstr.val]
not t3 = t2 (if Invert)
mov EAX = t1
lcs dest = [bitinstr.addr], t3 [EAX is implicit]
bz newMBB
fallthrough -->nextMBB
the 'ld' at the beginning of newMBB should be lift out of the loop
as lcs (or CMPXCHG on x86) will load the current memory value into
EAX. This loop is refined as:
thisMBB:
EAX = LOAD [MI.addr]
mainMBB:
t1 = OP [MI.val], EAX
LCMPXCHG [MI.addr], t1, [EAX is implicitly used & defined]
JNE mainMBB
sinkMBB:
* Remove immopc as, so far, all pseudo-atomic instructions has
all-register form only, there is no immedidate operand.
* Remove unnecessary attributes/modifiers in pseudo-atomic instruction
td
* Fix issues in PR13458
- Add comprehensive tests on atomic ops on various data types.
NOTE: Some of them are turned off due to missing functionality.
- Revise tests due to the new spin-loop generated.
llvm-svn: 164281
