Further develops the vsextload support added in #79815 / b5d35feacb7246573c6a4ab2bddc4919a4228ed5 - reduces the size of the vector constant by storing it in the constant pool in a truncated form, and zero-extend it as part of the load.
Reduce the size of the vector constant by storing it in the constant pool in a truncated form, and sign-extend it as part of the load.
I've extended the existing FixupConstant functionality to support these sext constant rebuilds - we still select the smallest stored constant entry and prefer vzload/broadcast/vextload for same bitwidth to avoid domain flips.
I intend to add the matching load+zero-extend handling in a future PR, but that requires some alterations to the existing MC shuffle comments handling first.
PSHUFD/PSHUFLW/PSHUFHW can act as a vector move / folded load, notably helping simplify pre-AVX cases in particular.
This is a much milder alternative to refactoring canonicalizeShuffleWithBinOps to support SSE shifts nodes.
As discussed on Issue #59217, under certain circumstances the DAG can generate duplicate MUL and MUL_LOHI nodes, often during MULO legalization.
This patch attempts to replace MUL nodes with additional uses of the LO result from the MUL_LOHI node
Differential Revision: https://reviews.llvm.org/D138790
As raised by @efriedma on D117995 - the source must not be undef/poison to demand any bits in mul(x,x) other than bit[1]
https://alive2.llvm.org/ce/z/Cxkjen
This patch contains following enhancements to SrcRegMap and DstRegMap:
1 In findOnlyInterestingUse not only check if the Reg is two address usage,
but also check after commutation can it be two address usage.
2 If a physical register is clobbered, remove SrcRegMap entries that are
mapped to it.
3 In processTiedPairs, when create a new COPY instruction, add a SrcRegMap
entry only when the COPY instruction is coalescable. (The COPY src is
killed)
With these enhancements isProfitableToCommute can do better commute decision,
and finally more register copies are removed.
Differential Revision: https://reviews.llvm.org/D108731
This enables the register to be changed from XMM/YMM/ZMM0 to
instead match the other source. This prevents a false
dependency.
I added all the integer unpck instructions, but the tests
only show changes for BW and WD.
Unfortunately, we can have undef on operand 1 or 2 of the AVX
instructions. This breaks the interface with hasUndefRegUpdate
which used to tell which operand to check.
Now we scan the input operands looking for an undef register and
then ask hasUndefRegUpdate if its an instruction we care about
and which operands of that instruction we care about.
I also had to make some changes to the load folding code to
always pass operand 1 to hasUndefRegUpdate. I've updated
hasUndefRegUpdate to return false when ForLoadFold is set for
instructions that are not explicitly blocked for load folding in
isel patterns.
Differential Revision: https://reviews.llvm.org/D79615
This can occur under certain circumstances when undefs are created later on in the constant multipliers (e.g. in this case due to SimplifyDemandedVectorElts). Its better to let the shift by zero to occur and perform any cleanup afterward.
Fixes OSS Fuzz #15429
llvm-svn: 364179
Summary:
We need to unpackl and unpackh the operands to use two vXi16 multiplies. Previously it looks like the low unpack would get constant folded at least in the 128-bit case after shuffle lowering turned the unpackl into ZERO_EXTEND_VECTOR_INREG and X86 custom DAG combined it. The same doesn't happen for the high half. So we'd load a constant and then shuffle it. But the low half would just be loaded and used by the multiply directly.
After this patch we now end up with a constant pool entry for the low and high unpacks separately with no shuffle operations.
This is a step towards removing custom constant folding for ZERO_EXTEND_VECTOR_INREG/SIGN_EXTEND_VECTOR_INREG in the X86 backend.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55165
llvm-svn: 348159
Previously if V2 was unused we ended up using V1 for both inputs as part of the code that follows the new code. By using lowerVectorShuffleWithUNPCK we keep the undef nature of V2 in the output.
As near as I can tell this makes v16i8 behavior consistent with every other VT now.
This does mean that we give the register allocator freedom to fill in random registers now and create false dependencies. But like I said we're already doing that for other types.
llvm-svn: 347296
Summary: This is an improvement over the two pshufbs and punpcklqdq we'd get otherwise.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54671
llvm-svn: 347171
We aren't going to use the upper bits of the multiply result that the extend would effect. So we don't need a specific type of extend.
This makes some reduction test cases shorter because we were previously trying to sign_extend a truncate which we can't eliminate.
llvm-svn: 347011
With the SRAs removed from the SSE2 code in D44267, then there doesn't appear to be any advantage to the sse41 code. The punpcklbw instruction and pmovsx seem to have the same latency and throughput on most CPUs. And the SSE41 code requires moving the upper 64-bits into the lower 64-bit before the sign extend can be done. The unpckhbw in sse2 code can do better than that.
llvm-svn: 327869
At first, I tried to thread the x86 needle and use a target hook (isVectorShiftByScalarCheap())
to disable the transform only for non-splat pow-of-2 constants, but not AVX2, but only some
element types, but...it's difficult.
Here we just avoid the loop with the x86 vector transform that conflicts with the general DAG
combine and preserve all of the existing behavior AFAICT otherwise.
Some tests that will probably fail if someone does try to restrict this in a more targeted way
for x86-only may be found in:
test/CodeGen/X86/combine-mul.ll
test/CodeGen/X86/vector-mul.ll
test/CodeGen/X86/widen_arith-5.ll
This should prevent the infinite looping seen with:
https://bugs.llvm.org/show_bug.cgi?id=35579
Differential Revision: https://reviews.llvm.org/D41040
llvm-svn: 320374
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
llvm-svn: 319665
