The motivating use case is to support import the function declaration
across modules to construct call graph edges for indirect calls [1]
when importing the function definition costs too much compile time
(e.g., the function is too large has no `noinline` attribute).
1. Currently, when the compiled IR module doesn't have a function
definition but its postlink combined summary contains the function
summary or a global alias summary with this function as aliasee, the
function definition will be imported from source module by IRMover. The
implementation is in FunctionImporter::importFunctions [2]
2. In order for FunctionImporter to import a declaration of a function,
both function summary and alias summary need to carry the def / decl
state. Specifically, all existing summary fields doesn't differ across
import modules, but the def / decl state of is decided by
`<ImportModule, Function>`.
This change encodes the def/decl state in `GlobalValueSummary::GVFlags`.
In the subsequent changes
1. The indexing step `computeImportForModule` [3]
will compute the set of definitions and the set of declarations for each
module, and passing on the information to bitcode writer.
2. Bitcode writer will look up the def/decl state and sets the state
when it writes out the flag value. This is demonstrated in
https://github.com/llvm/llvm-project/pull/87600
3. Function importer will read the def/decl state when reading the
combined summary to figure out two sets of global values, and IRMover
will be updated to import the declaration (aka linkGlobalValuePrototype [4])
into the destination module.
- The next change is https://github.com/llvm/llvm-project/pull/87600
[1] mentioned in rfc https://discourse.llvm.org/t/rfc-for-better-call-graph-sort-build-a-more-complete-call-graph-by-adding-more-indirect-call-edges/74029#support-cross-module-function-declaration-import-5
[2] 3b337242ee/llvm/lib/Transforms/IPO/FunctionImport.cpp (L1608-L1764)
[3] 3b337242ee/llvm/lib/Transforms/IPO/FunctionImport.cpp (L856)
[4] 3b337242ee/llvm/lib/Linker/IRMover.cpp (L605)
As before we only skip instrumenting probe of `unwind`(`KnownColdBlock`)
block, this PR extends to skip the both EH flow from `invoke`, i.e. also
skip the `normal` dest. For more contexts: when doing call-to-invoke
conversion, the block is split by the `invoke` and two extra
blocks(`normal` and `unwind`) are added. With this PR, the
instrumentation is the same as the one before the call-to-invoke
conversion.
One significant benefit is this can help mitigate the "unstable IR"
issue(https://discourse.llvm.org/t/ipo-for-linkonce-odr-functions/69404),
the two versions now are on the same probe instrumentation, expected to
be the same checksum.
To achieve the same checksum, some tweaks is needed:
- Now it also skips incrementing the probe ID for the skipped probe.
- The checksum is also computed based on the CFG that skips the EH
edges.
We observed this fixes ~5% mismatched samples.
The inrange attribute is not relevant to the optimizations being
tested here. Additionally, all the inrange attributes in these
files don't actually carry any additional information, as the
"range" covers the whole object.
Originally, when `EnableImportMetadata` enabled, `SourceFileName` will
be recorded as `thinlto_src_module`. Now `SourceFileName` will be
recorded as `thinlto_src_file` and `ModuleIdentifier` will be recorded
as `thinlto_src_module`.
Fix for assert after PR#78264.
Handle the case where the MIB context is empty after skipping the
callsite context, because the callsite context is actually longer than
the MIB context. Presumably this happened as a result of inlining, but
in theory the metadata should have been replaced with an attribute in
that case. Need to investigate why this is occuring, but for now handle
this gracefully to fix the build regression.
We've been building and testing this no-debug-intrinsic work inside of
the pass manager for a while, so that optimisation passes get exercised
and tested when we turn it on. However, by converting to the
non-intrinsic form in the bitcode loader, we accidentally caused all
parts of LLVM to potentially see non-intrinsic debug-info.
Seeing how we're trying to turn things on incrementally, it was a
mistake to go this far this fast: we can instead just focus on enabling
during optimisations for the moment, then all the other parts of LLVM
later.
Turns out I was using DbgMarker::getDbgValueRange rather than the helper
utility in Instruction::getDbgValueRange, which checks for null-ness.
Original commit message follows.
[DebugInfo][RemoveDIs] Convert debug-info modes when loading bitcode (#78967)
As part of eliminating debug-intrinsics in LLVM, we'll shortly be
pushing the conversion from "old" dbg.value mode to "new" DPValue mode
out from when the pass manager runs, to when modules are loaded. This
patch adds that conversion process and some (temporary) options to
llvm-lto{,2} to help test it.
Specifically: now whenever we load a bitcode module, consider a flag of
whether to "upgrade" it into the new debug-info mode, and if we're
lazily materializing functions then do that lazily too. Doing this
exposes an error in the IRLinker/materializer handling of DPValues,
where we need to transfer the debug-info format flag correctly, and in
ValueMapper we need to remap the Values that DPValues point at.
I've added some test coverage in the modified tests; these will be
exercised by our llvm-new-debug-iterators buildbot.
This upgrading of debug-info won't be happening for the llvm18 release,
instead we'll turn it on after the branch date, thenbe push the boundary
of where "new" debug-info starts and ends down into the existing
debug-info upgrade path over the course of the next release.
As part of eliminating debug-intrinsics in LLVM, we'll shortly be
pushing the conversion from "old" dbg.value mode to "new" DPValue mode
out from when the pass manager runs, to when modules are loaded. This
patch adds that conversion process and some (temporary) options to
llvm-lto{,2} to help test it.
Specifically: now whenever we load a bitcode module, consider a flag of
whether to "upgrade" it into the new debug-info mode, and if we're
lazily materializing functions then do that lazily too. Doing this
exposes an error in the IRLinker/materializer handling of DPValues,
where we need to transfer the debug-info format flag correctly, and in
ValueMapper we need to remap the Values that DPValues point at.
I've added some test coverage in the modified tests; these will be
exercised by our llvm-new-debug-iterators buildbot.
This upgrading of debug-info won't be happening for the llvm18 release,
instead we'll turn it on after the branch date, thenbe push the boundary
of where "new" debug-info starts and ends down into the existing
debug-info upgrade path over the course of the next release.
This fixes some cases of missing debuginfo caused by an interaction
between:
f0d66559ea,
which drops the identifier from a DICompositeType in the module
containing its
vtable.
and
a61f5e3796,
which causes ThinLTO to import composite types as declarations when they
have
an identifier.
If a virtual class's DICompositeType has no identifier due to the first
change,
and contains a nested anonymous type which does have an identifier, then
the
second change can cause ThinLTO to output the classes's DICompositeType
as a
type definition that links to a non-defining declaration for the nested
type.
Since the nested anonyous type does not have a name, debuggers are
unable to
find the definition for the declaration.
Repro case:
```
cat > a.h <<EOF
class A {
public:
A();
virtual ~A();
private:
union {
int val;
};
};
EOF
cat > a.cc <<EOF
#include "a.h"
A::A() { asm(""); }
A::~A() {}
EOF
cat > main.cc <<EOF
#include "a.h"
int main(int argc, char **argv) {
A a;
return 0;
}
EOF
clang++ -O2 -g -flto=thin -mllvm -force-import-all main.cc a.cc
gdb ./a.out -batch -ex 'pt /rmt A'
```
The gdb command outputs:
```
type = class A {
private:
union {
<incomplete type>
};
}
```
and dwarfdump -i a.out shows a DW_TAG_class_type for A with an
incomplete union
type (note that there is also a duplicate entry with the full union type
that
comes after).
```
< 1><0x0000001e> DW_TAG_class_type
DW_AT_containing_type <0x0000001e>
DW_AT_calling_convention DW_CC_pass_by_reference
DW_AT_name (indexed string: 0x00000007)A
DW_AT_byte_size 0x00000010
DW_AT_decl_file 0x00000001 /path/to/./a.h
DW_AT_decl_line 0x00000001
...
< 2><0x0000002f> DW_TAG_member
DW_AT_type <0x00000037>
DW_AT_decl_file 0x00000001 /path/to/./a.h
DW_AT_decl_line 0x00000007
DW_AT_data_member_location 8
< 2><0x00000037> DW_TAG_union_type
DW_AT_export_symbols yes(1)
DW_AT_calling_convention DW_CC_pass_by_value
DW_AT_declaration yes(1)
```
This change works around this by making ThinLTO always import full
definitions
for anonymous types.
If tail call optimization was not disabled for the profiled binary, the
call contexts will be missing frames for tail calls. Handle this by
performing a limited search through tail call edges for the profiled
callee when a discontinuity is detected. The search depth is adjustable
but defaults to 5.
If we are able to identify a short sequence of tail calls, update the
graph for those calls. In the case of ThinLTO, synthesize the necessary
CallsiteInfos for carrying the cloning information to the backends.
This patch deduces `noundef` attributes for return values.
IIUC, a function returns `noundef` values iff all of its return values
are guaranteed not to be `undef` or `poison`.
Definition of `noundef` from LangRef:
```
noundef
This attribute applies to parameters and return values. If the value representation contains any
undefined or poison bits, the behavior is undefined. Note that this does not refer to padding
introduced by the type’s storage representation.
```
Alive2: https://alive2.llvm.org/ce/z/g8Eis6
Compile-time impact: http://llvm-compile-time-tracker.com/compare.php?from=30dcc33c4ea3ab50397a7adbe85fe977d4a400bd&to=c5e8738d4bfbf1e97e3f455fded90b791f223d74&stat=instructions:u
|stage1-O3|stage1-ReleaseThinLTO|stage1-ReleaseLTO-g|stage1-O0-g|stage2-O3|stage2-O0-g|stage2-clang|
|--|--|--|--|--|--|--|
|+0.01%|+0.01%|-0.01%|+0.01%|+0.03%|-0.04%|+0.01%|
The motivation of this patch is to reduce the number of `freeze` insts
and enable more optimizations.
Simplify the compiler-rt test to make it more general for different
platforms, and use `*DAG` matchers for lines that may be emitted
out-of-order.
- The compiler-rt test passed on a Windows machine. Previously name
matchers don't work for MSVC mangling
(https://lab.llvm.org/buildbot/#/builders/127/builds/59907)
- `*DAG` matchers fixed the error in
https://lab.llvm.org/buildbot/#/builders/94/builds/17924
This is the second reland and fixed errors caught in first reland
(https://github.com/llvm/llvm-project/pull/75860)
**Original commit message**
Commit fe05193 (phab D156569), IRPGO names uses format
`[<filepath>;]<linkage-name>` while prior format is
`[<filepath>:<mangled-name>`. The format change would break the use case
demonstrated in (updated)
`llvm/test/Transforms/PGOProfile/thinlto_indirect_call_promotion.ll` and
`compiler-rt/test/profile/instrprof-thinlto-indirect-call-promotion.cpp`
This patch changes `GlobalValues::getGlobalIdentifer` to use the
semicolon.
To elaborate on the scenario how things break without this PR
1. IRPGO raw profiles stores (compressed) IRPGO names of functions in
one section, and per-function profile data in another section. The
[NameRef](fc715e4cd9/compiler-rt/include/profile/InstrProfData.inc (L72))
field in per-function profile data is the MD5 hash of IRPGO names.
2. When raw profiles are converted to indexed format profiles, the
profiled address is
[mapped](fc715e4cd9/llvm/lib/ProfileData/InstrProf.cpp (L876-L885))
to the MD5 hash of the callee.
3. In `pgo-instr-use` thin-lto prelink pipeline, MD5 hash of IRPGO names
will be
[annotated](fc715e4cd9/llvm/lib/Transforms/Instrumentation/PGOInstrumentation.cpp (L1707))
as value profiles, and used to import indirect-call-prom candidates. If
the annotated MD5 hash is computed from the new format while import uses
the prior format, the callee cannot be imported.
*
`compiler-rt/test/profile/instrprof-thinlto-indirect-call-promotion.cpp`
is added to have an end-to-end test.
* `llvm/test/Transforms/PGOProfile/thinlto_indirect_call_promotion.ll`
is updated to have better test coverage from another aspect (as runtime
tests are more sensitive to the environment and may be skipped by some
contributors)
Fixed build-bot failures caught by post-submit tests
1) Add the list of command line tools needed by new compiler-rt test into dependency.
2) Use `starts_with` to replace deprecated `startswith`.
**Original commit message**
Commit fe05193 (phab D156569), IRPGO names uses format
`[<filepath>;]<linkage-name>` while prior format is
`[<filepath>:<mangled-name>`. The format change would break the use case
demonstrated in (updated)
`llvm/test/Transforms/PGOProfile/thinlto_indirect_call_promotion.ll` and
`compiler-rt/test/profile/instrprof-thinlto-indirect-call-promotion.cpp`
This patch changes `GlobalValues::getGlobalIdentifer` to use the
semicolon.
To elaborate on the scenario how things break without this PR
1. IRPGO raw profiles stores (compressed) IRPGO names of functions in
one section, and per-function profile data in another section. The
[NameRef](fc715e4cd9/compiler-rt/include/profile/InstrProfData.inc (L72))
field in per-function profile data is the MD5 hash of IRPGO names.
2. When raw profiles are converted to indexed format profiles, the
profiled address is
[mapped](fc715e4cd9/llvm/lib/ProfileData/InstrProf.cpp (L876-L885))
to the MD5 hash of the callee.
3. In `pgo-instr-use` thin-lto prelink pipeline, MD5 hash of IRPGO names
will be
[annotated](fc715e4cd9/llvm/lib/Transforms/Instrumentation/PGOInstrumentation.cpp (L1707))
as value profiles, and used to import indirect-call-prom candidates. If
the annotated MD5 hash is computed from the new format while import uses
the prior format, the callee cannot be imported.
*
`compiler-rt/test/profile/instrprof-thinlto-indirect-call-promotion.cpp`
is added to have an end-to-end test.
* `llvm/test/Transforms/PGOProfile/thinlto_indirect_call_promotion.ll`
is updated to have better test coverage from another aspect (as runtime
tests are more sensitive to the environment and may be skipped by some
contributors)
Commit fe05193 (phab D156569), IRPGO names uses format
`[<filepath>;]<linkage-name>` while prior format is
`[<filepath>:<mangled-name>`. The format change would break the use case
demonstrated in (updated)
`llvm/test/Transforms/PGOProfile/thinlto_indirect_call_promotion.ll` and
`compiler-rt/test/profile/instrprof-thinlto-indirect-call-promotion.cpp`
This patch changes `GlobalValues::getGlobalIdentifer` to use the
semicolon.
To elaborate on the scenario how things break without this PR
1. IRPGO raw profiles stores (compressed) IRPGO names of functions in
one section, and per-function profile data in another section. The
[NameRef](fc715e4cd9/compiler-rt/include/profile/InstrProfData.inc (L72))
field in per-function profile data is the MD5 hash of IRPGO names.
2. When raw profiles are converted to indexed format profiles, the
profiled address is
[mapped](fc715e4cd9/llvm/lib/ProfileData/InstrProf.cpp (L876-L885))
to the MD5 hash of the callee.
3. In `pgo-instr-use` thin-lto prelink pipeline, MD5 hash of IRPGO names
will be
[annotated](fc715e4cd9/llvm/lib/Transforms/Instrumentation/PGOInstrumentation.cpp (L1707))
as value profiles, and used to import indirect-call-prom candidates. If
the annotated MD5 hash is computed from the new format while import uses
the prior format, the callee cannot be imported.
*`compiler-rt/test/profile/instrprof-thinlto-indirect-call-promotion.cpp`
is added to have an end-to-end test.
* `llvm/test/Transforms/PGOProfile/thinlto_indirect_call_promotion.ll`
is updated to have better test coverage from another aspect (as runtime
tests are more sensitive to the environment and may be skipped by some
contributors)
An example of a "workload definition" would be "the transitive closure of functions actually called to satisfy a RPC request", i.e. a (typically significantly) smaller subset of the transitive closure (static + possible indirect call targets) of callees. This means this workload definition is a type of flat dynamic profile.
Producing one is not in scope - it can be produced offline from traces, or from sample-based profiles, etc.
This patch adds awareness to ThinLTO of such a concept. A workload is defined as a root and a list of functions. All function references are by-name (more readable than GUIDs). In the case of aliases, the expectation is the list contains all the alternative names.
The workload definitions are presented to the linker as a json file, containing a dictionary. The keys are the roots, the values are the list of functions.
The import list for a module defining a root will be the functions listed for it in the profile.
Using names this way assumes unique names for internal functions, i.e. clang's `-funique-internal-linkage-names`.
Note that the behavior affects the entire module where a root is defined (i.e. different workloads best be defined in different modules), and does not affect modules that don't define roots.
This adds support for a HasTailCall flag on function call edges in the
ThinLTO summary. It is intended for use in aiding discovery of missing
frames from tail calls in profiled call stacks for MemProf of profiled
binaries that did not disable tail call elimination. A follow on change
will add the use of this new flag during MemProf context disambiguation.
The new flag is encoded in the bitcode along with either the hotness
flag from the profile, or the relative block frequency under the
-write-relbf-to-summary flag when there is no profile data.
Because we now will always have some additional call edge information, I
have removed the non-profile function summary record format, and we
simply encode the tail call flag along with a hotness type of none when
there is no profile information or relative block frequency. The change
of record format and name caused most of the test case changes.
I have added explicit testing of generation of the new tail call flag
into the bitcode and IR assembly format as part of the changes to
llvm/test/Bitcode/thinlto-function-summary-refgraph.ll. I have also
added round trip testing through assembly and bitcode to
llvm/test/Assembler/thinlto-summary.ll.
Dead store elimination pass may fold malloc + memset calls into a single
call to calloc. If calloc is not preserved and is not being called
it can be marked dead which results in link error.
Mirror the handling in ModuleSummaryAnalysis to look through aliases
when handling call instructions in the ThinLTO backend MemProf handling.
Fixes#72094
BlockFrequencyInfo calculates block frequencies as Scaled64 numbers but as a last step converts them to unsigned 64bit integers (`BlockFrequency`). This improves the factors picked for this conversion so that:
* Avoid big numbers close to UINT64_MAX to avoid users overflowing/saturating when adding multiply frequencies together or when multiplying with integers. This leaves the topmost 10 bits unused to allow for some room.
* Spread the difference between hottest/coldest block as much as possible to increase precision.
* If the hot/cold spread cannot be represented loose precision at the lower end, but keep the frequencies at the upper end for hot blocks differentiable.
The module paths string table mapped to both an id sequentially assigned
during LTO linking, and the module hash. The former is leftover from
before the module hash was added for caching and subsequently replaced
use of the module id when renaming promoted symbols (to avoid affects
due to link order changes). The sequentially assigned module id was not
removed, however, as it was still a convenience when serializing to/from
bitcode and assembly.
This patch removes the module id from this table, since it isn't
strictly needed and can lead to confusion on when it is appropriate to
use (e.g. see fix in D156525). It also takes a (likely not significant)
amount of overhead. Where an integer module id is needed (e.g. bitcode
writing), one is assigned on the fly.
There are a couple of test changes since the paths are now sorted
alphanumerically when assigning ids on the fly during assembly writing,
in order to ensure deterministic behavior.
Differential Revision: https://reviews.llvm.org/D156730
Fix https://github.com/llvm/llvm-project/issues/58740
The `target_clones` attribute results in ifunc on eligible targets
(Linux glibc/Android or FreeBSD). If the function has internal linkage,
we will get an internal linkage ifunc.
```
__attribute__((target_clones("popcnt", "default")))
static int foo(int n) { return __builtin_popcount(n); }
int use(int n) { return foo(n); }
@foo.ifunc = internal ifunc i32 (i32), ptr @foo.resolver
define internal nonnull ptr @foo.resolver() comdat {
; local linkage comdat is another issue that should be fixed
...
select i1 %.not, ptr @foo.default.1, ptr @foo.popcnt.0
...
}
define internal i32 @foo.default.1(i32 noundef %n)
```
ifuncs are not included in module summaries, so LTO doesn't know the
local linkage `foo.default.1` referenced by `foo.resolver`
should be promoted. If a caller of `foo` (e.g. `use`) is imported,
the local linkage `foo.resolver` will be cloned as a definition
(IRLinker::shouldLink), leading to linker errors.
```
ld.lld: error: undefined hidden symbol: foo.default.1.llvm.8017227050314953235
>>> referenced by bar.c
>>> lto.tmp:(foo.ifunc)
```
As a simple fix, just mark `use` as not eligible for import. Non-local
linkage ifuncs do not have the problem, because they are not imported,
and not cloned when a caller is imported.
---
https://reviews.llvm.org/D82745 contains a more involved fix, though the
original bug it intended to fix
(https://github.com/llvm/llvm-project/issues/45833) now works.
Note: importing ifunc is tricky.
If we import an ifunc, we need to make sure the resolver and the
implementation are in the translation unit, as required by
https://sourceware.org/glibc/wiki/GNU_IFUNC
> Requirement (a): Resolver must be defined in the same translation unit as the implementations.
This is infeasible if the implementation is changed to
available_externally.
In addition, the imported ifunc may be referenced by two translation
units. This doesn't work with PowerPC32 -msecure-plt
(https://maskray.me/blog/2021-01-18-gnu-indirect-function).
At the very least, every referencing translation unit needs one extra
IRELATIVE dynamic relocation.
At least for the local linkage ifunc case, it doesn't have much use
outside of `target_clones`, as a global pointer is usually a better
replacement.
I think ifuncs just have too many pitfalls to design more IR features
around it to optimize them.
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D158961
This is a followup to D151165. Instead of using the module ID, use
the module hash for sorting the import list. The module hash is what
will actually be included in the hash.
This has the advantage of being independent of the module order,
which is something that Rust relies on.
A caveat here is that the test doesn't quite work for linkonce_odr
functions, because the function may be imported from two different
modules, and the first one on the llvm-lto2 command line gets picked
(rather than, say, the prevailing copy). This doesn't really matter
for Rust's purposes (because it does not use linkonce_odr linkage),
but may still be worth addressing. For now I'm using a variant of
the test using internal instead of linkonce_odr functions.
Differential Revision: https://reviews.llvm.org/D156525
This reverts commit d80fdc6fc1a6e717af1bcd7a7313e65de433ba85.
split-dwarf-local-impor3.ll fails because of an issue with
Dwo sections emission on Windows platform.
RFC https://discourse.llvm.org/t/rfc-dwarfdebug-fix-and-improve-handling-imported-entities-types-and-static-local-in-subprogram-and-lexical-block-scopes/68544
Fixed PR51501 (tests from D112337).
1. Reuse of DISubprogram's 'retainedNodes' to track other function-local
entities together with local variables and labels (this patch cares about
function-local import while D144006 and D144008 use the same approach for
local types and static variables). So, effectively this patch moves ownership
of tracking local import from DICompileUnit's 'imports' field to DISubprogram's
'retainedNodes' and adjusts DWARF emitter for the new layout. The old layout
is considered unsupported (DwarfDebug would assert on such debug metadata).
DICompileUnit's 'imports' field is supposed to track global imported
declarations as it does before.
This addresses various FIXMEs and simplifies the next part of the patch.
2. Postpone emission of function-local imported entities from
`DwarfDebug::endFunctionImpl()` to `DwarfDebug::endModule()`.
While in `DwarfDebug::endFunctionImpl()` we do not have all the
information about a parent subprogram or a referring subprogram
(whether a subprogram inlined or not), so we can't guarantee we emit
an imported entity correctly and place it in a proper subprogram tree.
So now, we just gather needed details about the import itself and its
parent entity (either a Subprogram or a LexicalBlock) during
processing in `DwarfDebug::endFunctionImpl()`, but all the real work is
done in `DwarfDebug::endModule()` when we have all the required
information to make proper emission.
Authored-by: Kristina Bessonova <kbessonova@accesssoftek.com>
Differential Revision: https://reviews.llvm.org/D144004
This reverts commit ed578f02cf44a52adde16647150e7421f3ef70f3.
Tests llvm/test/DebugInfo/Generic/split-dwarf-local-import*.ll fail
when x86_64 target is not registered.
RFC https://discourse.llvm.org/t/rfc-dwarfdebug-fix-and-improve-handling-imported-entities-types-and-static-local-in-subprogram-and-lexical-block-scopes/68544
Fixed PR51501 (tests from D112337).
1. Reuse of DISubprogram's 'retainedNodes' to track other function-local
entities together with local variables and labels (this patch cares about
function-local import while D144006 and D144008 use the same approach for
local types and static variables). So, effectively this patch moves ownership
of tracking local import from DICompileUnit's 'imports' field to DISubprogram's
'retainedNodes' and adjusts DWARF emitter for the new layout. The old layout
is considered unsupported (DwarfDebug would assert on such debug metadata).
DICompileUnit's 'imports' field is supposed to track global imported
declarations as it does before.
This addresses various FIXMEs and simplifies the next part of the patch.
2. Postpone emission of function-local imported entities from
`DwarfDebug::endFunctionImpl()` to `DwarfDebug::endModule()`.
While in `DwarfDebug::endFunctionImpl()` we do not have all the
information about a parent subprogram or a referring subprogram
(whether a subprogram inlined or not), so we can't guarantee we emit
an imported entity correctly and place it in a proper subprogram tree.
So now, we just gather needed details about the import itself and its
parent entity (either a Subprogram or a LexicalBlock) during
processing in `DwarfDebug::endFunctionImpl()`, but all the real work is
done in `DwarfDebug::endModule()` when we have all the required
information to make proper emission.
Authored-by: Kristina Bessonova <kbessonova@accesssoftek.com>
Differential Revision: https://reviews.llvm.org/D144004
RFC https://discourse.llvm.org/t/rfc-dwarfdebug-fix-and-improve-handling-imported-entities-types-and-static-local-in-subprogram-and-lexical-block-scopes/68544
Fixed PR51501 (tests from D112337).
1. Reuse of DISubprogram's 'retainedNodes' to track other function-local
entities together with local variables and labels (this patch cares about
function-local import while D144006 and D144008 use the same approach for
local types and static variables). So, effectively this patch moves ownership
of tracking local import from DICompileUnit's 'imports' field to DISubprogram's
'retainedNodes' and adjusts DWARF emitter for the new layout. The old layout
is considered unsupported (DwarfDebug would assert on such debug metadata).
DICompileUnit's 'imports' field is supposed to track global imported
declarations as it does before.
This addresses various FIXMEs and simplifies the next part of the patch.
2. Postpone emission of function-local imported entities from
`DwarfDebug::endFunctionImpl()` to `DwarfDebug::endModule()`.
While in `DwarfDebug::endFunctionImpl()` we do not have all the
information about a parent subprogram or a referring subprogram
(whether a subprogram inlined or not), so we can't guarantee we emit
an imported entity correctly and place it in a proper subprogram tree.
So now, we just gather needed details about the import itself and its
parent entity (either a Subprogram or a LexicalBlock) during
processing in `DwarfDebug::endFunctionImpl()`, but all the real work is
done in `DwarfDebug::endModule()` when we have all the required
information to make proper emission.
Authored-by: Kristina Bessonova <kbessonova@accesssoftek.com>
Differential Revision: https://reviews.llvm.org/D144004
This fixes a runtime error that occurred due to incorrect
internalization of linkonce_odr functions where function pointer
equality was broken. This was hit because the prevailing copy was in a
native object, so the IR copies were not exported, and the existing code
internalized all of the IR copies. It could be fixed by guarding this
internalization on whether the defs are (local_)unnamed_addr, meaning
that their address is not significant (which we have in the summary
currently for linkonce_odr via the CanAutoHide flag). Or we can
propagate reference attributes as we do when determining whether a
global variable is read or write-only (reference edges are annotated
with whether they are read-only, write-only, or neither, and taking the
address of a function would result in a reference edge to the function
that is not read or write-only).
However, this exposed a larger issue with the internalization handling.
Looking at test cases, it appears the intent is to internalize when
there is a single definition of a linkonce/weak ODR symbol (that isn't
exported). This makes sense in the case of functions, because the
inliner can apply its last call to static heuristic when appropriate. In
the case where there is no prevailing copy in IR, internalizing all of
the IR copies of a linkonce_odr, even if legal, just increases binary
size. In that case it is better to fall back to the normal handling of
converting all non-prevailing copies to available_externally so that
they are eliminated after inlining.
In the case of variables, the existing code was attempting to
internalize the non-exported linkonce/weak ODR variables if they were
read or write-only. While this is legal (we propagate reference
attributes to determine this information), we don't even need to
internalize these here as there is later separate handling that
internalizes read and write-only variables when we process the module at
the start of the ThinLTO backend (processGlobalForThinLTO). Instead, we
can also internalize any non-exported variable when there is only one
(IR) definition, which is prevailing. And in that case, we don't need to
require that it is read or write-only, since we are guaranteed that all
uses must use that single definition.
In the new LTO API, if there are multiple defs of a linkonce or weak ODR
it will be marked exported, but it isn't clear that this will always be
true for the legacy LTO API. Therefore, require that there is only a
single (non-local) def, and that it is prevailing.
The test cases changes are both to reflect the change in the handling of
linkonce_odr IR copies where the prevailing def is not in IR (the main
correctness bug fix here), and to reflect the more aggressive
internalization of variables when there is only a single def, it is in
IR, and not exported.
I've also added some additional testing via the new LTO API.
Differential Revision: https://reviews.llvm.org/D151965
Otherwise there are cache misses just from changing the name of a path, even though the input modules did not change.
rdar://109672225
Differential Revision: https://reviews.llvm.org/D151165
This is a follow-up to b71edfaa4ec3c998aadb35255ce2f60bba2940b0
since I forgot the lit.local.cfg files in that one.
Reformatting is done with `black`.
If you end up having problems merging this commit because you
have made changes to a python file, the best way to handle that
is to run git checkout --ours <yourfile> and then reformat it
with black.
If you run into any problems, post to discourse about it and
we will try to help.
RFC Thread below:
https://discourse.llvm.org/t/rfc-document-and-standardize-python-code-style
Reviewed By: barannikov88, kwk
Differential Revision: https://reviews.llvm.org/D150762
I noticed that we are converting llvm.public.type.test to regular
llvm.type.test too early, and thus not updating those in imported
functions. This would result in losing out on WPD opportunities. Move
the update to after function importing, and improve test to cover this
case.
Differential Revision: https://reviews.llvm.org/D150326
The support added by D149215 to remove memprof metadata and attributes
if we don't link with an allocator supporting hot/cold operator new
interfaces did not update imported code. Move the update handling later
in the ThinLTO backend to just after importing, and update the test to
check this case.
Differential Revision: https://reviews.llvm.org/D150295
Adds an LTO option to indicate that whether we are linking with an
allocator that supports hot/cold operator new interfaces. If not,
at the start of the LTO backends any existing memprof hot/cold
attributes are removed from the IR, and we also remove memprof metadata
so that post-LTO inlining doesn't add any new attributes.
This is done via setting a new flag in the module summary index. It is
important to communicate via the index to the LTO backends so that
distributed ThinLTO handles this correctly, as they are invoked by
separate clang processes and the combined index is how we communicate
information from the LTO link. Specifically, for distributed ThinLTO the
LTO related processes look like:
```
# Thin link:
$ lld --thinlto-index-only obj1.o ... objN.o -llib ...
# ThinLTO backends:
$ clang -x ir obj1.o -fthinlto-index=obj1.o.thinlto.bc -c -O2
...
$ clang -x ir objN.o -fthinlto-index=objN.o.thinlto.bc -c -O2
```
It is during the thin link (lld --thinlto-index-only) that we have
visibility into linker dependences and want to be able to pass the new
option via -Wl,-supports-hot-cold-new. This will be recorded in the
summary indexes created for the distributed backend processes
(*.thinlto.bc) and queried from there, so that we don't need to know
during those individual clang backends what allocation library was
linked. Since in-process ThinLTO and regular LTO also use a combined
index, for consistency we query the flag out of the index in all LTO
backends.
Additionally, when the LTO option is disabled, exit early from the
MemProfContextDisambiguation handling performed during LTO, as this is
unnecessary.
Depends on D149117 and D149192.
Differential Revision: https://reviews.llvm.org/D149215
Applies ThinLTO cloning decisions made during the thin link and
recorded in the summary index to the IR during the ThinLTO backend.
Depends on D141077.
Differential Revision: https://reviews.llvm.org/D149117
This reverts commit f09807ca9dda2f588298d8733e89a81105c88120, restoring
bfe7205975a63a605ff3faacd97fe4c1bf4c19b3 and follow on fix
e3e6bc699574550f2ed1de07f4e5bcdddaa65557, now that the nondeterminism
has been addressed by D149924.
Differential Revision: https://reviews.llvm.org/D141077
