Folding a `select` into a floating point binary operators can only be
done if the result is preserved for both case. In particular, if the
other operand of the `select` can be a NaN, then the transformation
won't preserve the result value.
This patch canonicalizes getelementptr instructions with constant
indices to use the `i8` source element type. This makes it easier for
optimizations to recognize that two GEPs are identical, because they
don't need to see past many different ways to express the same offset.
This is a first step towards
https://discourse.llvm.org/t/rfc-replacing-getelementptr-with-ptradd/68699.
This is limited to constant GEPs only for now, as they have a clear
canonical form, while we're not yet sure how exactly to deal with
variable indices.
The test llvm/test/Transforms/PhaseOrdering/switch_with_geps.ll gives
two representative examples of the kind of optimization improvement we
expect from this change. In the first test SimplifyCFG can now realize
that all switch branches are actually the same. In the second test it
can convert it into simple arithmetic. These are representative of
common optimization failures we see in Rust.
Fixes https://github.com/llvm/llvm-project/issues/69841.
This patch introduces a new ComputeReductionResult opcode to compute the
final reduction result in the middle block. The code from fixReduction
has been moved to ComputeReductionResult, after some earlier cleanup
changes to model parts of fixReduction explicitly elsewhere as needed.
The recipe may be broken down further in the future.
Note that the phi nodes to merge the reduction result from the trip
count check and the middle block, to be used as resume value for the
scalar remainder loop are also generated based on
ComputeReductionResult.
Once we have a VPValue for the reduction result, this can also be
modeled explicitly and moved out of the recipe.
Move vector pointer generation to a separate VPVectorPointerRecipe.
This untangles address computation from the memory recipes future
and is also needed to enable explicit unrolling in VPlan.
https://github.com/llvm/llvm-project/pull/72164
This adds support for using dominating conditions in computeKnownBits()
when called from InstCombine. The implementation uses a
DomConditionCache, which stores which branches may provide information
that is relevant for a given value.
DomConditionCache is similar to AssumptionCache, but does not try to do
any kind of automatic tracking. Relevant branches have to be explicitly
registered and invalidated values explicitly removed. The necessary
tracking is done inside InstCombine.
The reason why this doesn't just do exactly the same thing as
AssumptionCache is that a lot more transforms touch branches and branch
conditions than assumptions. AssumptionCache is an immutable analysis
and mostly gets away with this because only a handful of places have to
register additional assumptions (mostly as a result of cloning). This is
very much not the case for branches.
This change regresses compile-time by about ~0.2%. It also improves
stage2-O0-g builds by about ~0.2%, which indicates that this change results
in additional optimizations inside clang itself.
Fixes https://github.com/llvm/llvm-project/issues/74242.
These tests rely on SCEV looking recognizing an "or" with no common
bits as an "add". Add the disjoint flag to relevant or instructions
in preparation for switching SCEV to use the flag instead of the
ValueTracking query. The IR with disjoint flag matches what
InstCombine would produce.
The disjoint flag was recently added to IR in #72583
We already set it when we turn an add into an or. This patch sets it on Ors that weren't converted from an Add.
Use KnownBits to infer the nneg flag on zext instructions.
Currently we only set nneg when converting sext -> zext, but don't set
it when we have a zext in the first place. If we want to use it in
optimizations, we should make sure the flag inference is consistent.
There was a silly mistake in the expandBounds function that was using
the wrong type when calling expandCodeFor and always assuming the stride
is 64 bits. I've added the following test to defend this fix:
Transforms/LoopVectorize/ARM/mve-hoist-runtime-checks.ll
Add first VPlan-based recipe simplification to fold (MUL A, 1) -> A.
Among other things, this enables additional simplifications after
applying versioned strides, as follow up to D147783.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D159200
Split off from D150398 to avoid builder-related diff changes there.
Using IRBuilder to create ICmps simplifies the result if both operands
are constants.
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D158332
This reverts commit 245ec675a4e41f7ec24dfc998720bffdc46a6c53.
Recommits eea9258648ce with a fix to only erase the instruction from the
first part if it is defined outside the loop. This fixes a
use-after-free error reported.
Set phi inputs to poison whenever we find a dead edge (either
during initial worklist population or the main InstCombine run),
instead of only doing this for successors of dead blocks.
This means that the phi operand is set to poison even if for
critical edges without an intermediate block.
There are quite a few test changes, because the pattern is fairly
common in vectorizer output, for cases where we know the vectorized
loop will be entered.
This reverts commit eea9258648ce73507f6f85c395de978af659d498.
That commit triggered crashes in the following testcase:
$ cat reduced.c
typedef struct {
int a[8]
} b;
typedef struct {
b *c;
short d
} e;
void f() {
int g;
char *h;
e *i = f;
short j = i->d;
int a = i->c->a[0];
for (;;)
for (; g < a; g++) {
*h = j * i->d >> 8;
h++;
}
}
$ clang -target aarch64-linux-gnu -w -c -O2 reduced.c
This reverts commit 20f0c68fd83a0147a8ec1722bd2e848180610288.
https://reviews.llvm.org/D153966#4464594 reports an optimization
regression in Rust.
Additionally this change has caused an unexpected 0.3% compile-time
regression.
After constructing the initial VPlan, replace VPValues for versioned
strides with their constant counterparts.
Differential Revision: https://reviews.llvm.org/D147783
This is a follow-up to b71edfaa4ec3c998aadb35255ce2f60bba2940b0
since I forgot the lit.local.cfg files in that one.
Reformatting is done with `black`.
If you end up having problems merging this commit because you
have made changes to a python file, the best way to handle that
is to run git checkout --ours <yourfile> and then reformat it
with black.
If you run into any problems, post to discourse about it and
we will try to help.
RFC Thread below:
https://discourse.llvm.org/t/rfc-document-and-standardize-python-code-style
Reviewed By: barannikov88, kwk
Differential Revision: https://reviews.llvm.org/D150762
Since D146813, LICM will reassociate GEPs to expose hoisting
opportunities itself. Don't perform this transform in InstCombine,
where it is fragile because it depends on an optional LoopInfo
analysis.
This is the follow-up to D144199 and suggestion from D144045.
We make use of loop info explicit via InstCombine pass parameter
rather than semi-arbitrary via caching.
The only InstCombine transform that uses LoopInfo currently is a
GEP fold in visitGEPOfGEP(), so that shows up as a failure in the
dedicated test for the fold as well as several LoopVectorizer tests
that run extra passes.
I don't see any pass manager regression tests that actually check
for pass options, but this is intended to be NFC for the pass
pipeline behavior - we only try to use loop info where it would
have been used before via caching .
Differential Revision: https://reviews.llvm.org/D144274
IR is now always parsed in opaque pointer mode, unless
-opaque-pointers=0 is explicitly given. There is no automatic
detection of typed pointers anymore.
The -opaque-pointers=0 option is added to any remaining IR tests
that haven't been migrated yet.
Differential Revision: https://reviews.llvm.org/D141912
Instcombine prefers this canonical form (see getPreferredVectorIndex),
as does IRBuilder when passing the index as an integer so we may as
well use the prefered form from creation.
NOTE: All test changes are mechanical with nothing else expected
beyond a change of index type from i32 to i64.
Differential Revision: https://reviews.llvm.org/D140983
This patch adds metadata to disable runtime unrolling to the vectorized
loop. If runtime unrolling/interleaving is considered profitable, LV
will interleave the loop directly. There should be no need to perform
runtime unrolling at a later stage.
Note that we already add metadata to disable runtime unrolling to the
scalar loop after vectorization.
The additional unrolling unnecessarily increases code size and compile
time. In addition to that we have several bug reports of unncessary
runtime unrolling for vectorized loops, e.g. PR40961
Compile-time improvements:
NewPM-O3: -1.04%
NewPM-ReleaseThinLTO: -0.59%
NewPM-ReleaseLTO-g: -0.97%
https://llvm-compile-time-tracker.com/compare.php?from=ce1be13a868d0f8afa367975558c1a6175cce33a&to=78bc2e67f22e9e10e61cdb6cdac4bb857d95eb1b&stat=instructions:uFixes#40306.
Reviewed By: lebedev.ri, nikic
Differential Revision: https://reviews.llvm.org/D115261
Check lines for some of these tests were regenerated. The difference
is that with opaque pointers SCEVExpander always emits i8 GEPs,
making the address calculation explicit. This is a known problem
that will be solved long term by making all address calculations
explicit.
This reverts commit e71b81cab09bf33e3b08ed600418b72cc4117461.
As discussed in the planned follow-on to this patch (D138874),
this and the subsequent patches in this set can cause trouble for
the backend, and there's probably no quick fix. We may even
want to canonicalize in the opposite direction (towards insertelt).
The first attempt was reverted because a clang test changed
unexpectedly - the file is already marked with a FIXME, so
I just updated it this time to pass.
Original commit message:
This is the main patch for converting a truncated scalar that is
inserted into a vector to bitcast+shuffle. We could go either way
on patterns like this, but this direction will allow collapsing a
pair of these sequences on the motivating example from issue
The patch is split into 3 parts to make it easier to see the
progression of tests diffs. We allow inserting/shuffling into a
different size vector for flexibility, so there are several test
variations. The length-changing is handled by shortening/padding
the shuffle mask with undef elements.
In part 1, handle the basic pattern:
inselt undef, (trunc T), IndexC --> shuffle (bitcast T), IdentityMask
Proof for the endian-dependency behaving as expected:
https://alive2.llvm.org/ce/z/BsA7yC
The TODO items for handling shifts and insert into an arbitrary base
vector value are implemented as follow-ups.
Differential Revision: https://reviews.llvm.org/D138872
This is the main patch for converting a truncated scalar that is
inserted into a vector to bitcast+shuffle. We could go either way
on patterns like this, but this direction will allow collapsing a
pair of these sequences on the motivating example from issue
The patch is split into 3 parts to make it easier to see the
progression of tests diffs. We allow inserting/shuffling into a
different size vector for flexibility, so there are several test
variations. The length-changing is handled by shortening/padding
the shuffle mask with undef elements.
In part 1, handle the basic pattern:
inselt undef, (trunc T), IndexC --> shuffle (bitcast T), IdentityMask
Proof for the endian-dependency behaving as expected:
https://alive2.llvm.org/ce/z/BsA7yC
The TODO items for handling shifts and insert into an arbitrary base
vector value are implemented as follow-ups.
Differential Revision: https://reviews.llvm.org/D138872
In revision B.q and before of the Armv8-M architecture reference
manual, the vector/scalar forms of the `vmla` and `vmlas` instructions
came in signed and unsigned integer forms, such as `vmla.s8 q0,q1,r2`
or `vmlas.u32 q3,q4,r5`.
Revision B.r has changed this. There are no longer signed and unsigned
versions of these instructions, since they were functionally identical
anyway. Now there is just `vmla.i8` (or `i16` or `i32`, and similarly
for `vmlas`). Bit 28 of the instruction encoding, which was previously
0 for signed or 1 for unsigned, is now expected to be 0 always.
This change updates LLVM to the new version of the architecture. The
obsoleted encodings for unsigned integers are now decoding errors, and
only the still-valid encoding is ever emitted. This shouldn't break
any existing assembly code, because the old signed and unsigned
versions of the mnemonic are still accepted by the assembler (which is
standard practice anyway for all signedness-agnostic MVE integer
instructions).
Reviewed By: dmgreen, lenary
Differential Revision: https://reviews.llvm.org/D138827
This is quite reduced from the original example, but hopefully shows
where vectorization is unprofitable because of multiple factors
including the low trip count of the loop.
The existing cost model for fixed-order recurrences models the phi as an
extract shuffle of a v1 vector. The shuffle produced should be a splice,
as they take two vectors inputs are extracting from a subset of the
lanes. On certain architectures the existing cost model can drastically
under-estimate the correct cost for the shuffle, so this changes it to a
SK_Splice and passes a correct Mask through to the getShuffleCost call.
I believe this might be the first use of a SK_Splice shuffle cost model
outside of scalable vectors, and some targets may require additions to
the cost-model to correctly account for them. In tree targets appear to
all have been updated where needed.
Differential Revision: https://reviews.llvm.org/D132308
