With this patch an undefined mask in a shufflevector will be printed as poison.
This change is done to support the new shufflevector semantics
for undefined mask elements.
Differential Revision: https://reviews.llvm.org/D149210
Currently compiler does not support mixing of shuffled nodes
+ gather/buildvector of the remaining scalar values. It may reduce total
number of instructions and improve performance of the
gather/buildvector sequences.
Part of D110978
Differential Revision: https://reviews.llvm.org/D146167
SLP vectorizer emits extracts for externally used vectorized scalars and
estimates the cost for each such extract. But in many cases these
scalars are input for insertelement instructions, forming buildvector,
and instead of extractelement/insertelement pair we can emit/cost
estimate shuffle(s) cost and generate series of shuffles, which can be
further optimized.
Tested using test-suite (+SPEC2017), the tests passed, SLP was able to
generate/vectorize more instructions in many cases and it allowed to reduce
number of re-vectorization attempts (where we could try to vectorize
buildector insertelements again and again).
Differential Revision: https://reviews.llvm.org/D107966
This reverts commit fc9c59c355cb255446e571b4515b5e41a76503c4.
The patch triggers an assertion when building SPEC on X86. Reduced
reproducer shared at D107966.
Also reverts follow-up commit 11a09af76d11ad5a9f1f95b561112af17ff81f80.
SLP vectorizer emits extracts for externally used vectorized scalars and
estimates the cost for each such extract. But in many cases these
scalars are input for insertelement instructions, forming buildvector,
and instead of extractelement/insertelement pair we can emit/cost
estimate shuffle(s) cost and generate series of shuffles, which can be
further optimized.
Tested using test-suite (+SPEC2017), the tests passed, SLP was able to
generate/vectorize more instructions in many cases and it allowed to reduce
number of re-vectorization attempts (where we could try to vectorize
buildector insertelements again and again).
Differential Revision: https://reviews.llvm.org/D107966
No need to schedule entry nodes where all instructions are not memory
read/write instructions and their operands are either constants, or
arguments, or phis, or instructions from others blocks, or their users
are phis or from the other blocks.
The resulting vector instructions can be placed at
the beginning of the basic block without scheduling (if operands does
not need to be scheduled) or at the end of the block (if users are
outside of the block).
It may save some compile time and scheduling resources.
Differential Revision: https://reviews.llvm.org/D121121
tryToVectorizeList function allows to reorder only 2 scalars. Patch
allows to reorder >2 scalars. Also, to avoid possible regressions, it
allows extra vectorization of the remaining parts of the scalars
elements if possible.
Part of D57059.
Differential Revision: https://reviews.llvm.org/D103247
Add new type of tree node for `InsertElementInst` chain forming vector.
These instructions could be either removed, or replaced by shuffles during
vectorization and we can add this node to cost model, so naturally estimating
their cost, getting rid of `CompensateCost` tricks and reducing further work
for InstCombine. This fixes PR40522 and PR35732 in a natural way. Also this
patch is the first step towards revectorization of partially vectorization
(to fix PR42022 completely). After adding inserts to tree the next step is
to add vector instructions there (for instance, to merge `store <2 x float>`
and `store <2 x float>` to `store <4 x float>`).
Fixes PR40522 and PR35732.
Differential Revision: https://reviews.llvm.org/D98714
This patch makes SLP and LV emit operations with initial vectors set to poison constant instead of undef.
This is a part of efforts for using poison vector instead of undef to represent "doesn't care" vector.
The goal is to make nice shufflevector optimizations valid that is currently incorrect due to the tricky interaction between undef and poison (see https://bugs.llvm.org/show_bug.cgi?id=44185 ).
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D94061
This patch updates IRBuilder to create insertelement/shufflevector using poison as a placeholder.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D93793
As it's causing some bot failures (and per request from kbarton).
This reverts commit r358543/ab70da07286e618016e78247e4a24fcb84077fda.
llvm-svn: 358546
Remove attempts to commute non-Instructions to the LHS - the codegen changes appear to rely on chance more than anything else and also have a tendency to fight existing instcombine canonicalization which moves constants to the RHS of commutable binary ops.
This is prep work towards:
(a) reusing reorderInputsAccordingToOpcode for alt-shuffles and removing the similar reorderAltShuffleOperands
(b) improving reordering to optimized cases with commutable and non-commutable instructions to still find splat/consecutive ops.
Differential Revision: https://reviews.llvm.org/D59738
llvm-svn: 356913
As this has broken the lto bootstrap build for 3 days and is
showing a significant regression on the Dither_benchmark results (from
the LLVM benchmark suite) -- specifically, on the
BENCHMARK_FLOYD_DITHER_128, BENCHMARK_FLOYD_DITHER_256, and
BENCHMARK_FLOYD_DITHER_512; the others are unchanged. These have
regressed by about 28% on Skylake, 34% on Haswell, and over 40% on
Sandybridge.
This reverts commit r353923.
llvm-svn: 354434
Try to use 64-bit SLP vectorization. In addition to horizontal instrs
this change triggers optimizations for partial vector operations (for instance,
using low halfs of 128-bit registers xmm0 and xmm1 to multiply <2 x float> by
<2 x float>).
Fixes llvm.org/PR32433
llvm-svn: 353923
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
llvm-svn: 230794
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
llvm-svn: 230786
Before this patch we relied on the order of phi nodes when we looked for phi
nodes of the same type. This could prevent vectorization of cases where there
was a phi node of a second type in between phi nodes of some type.
This is important for vectorization of an internal graphics kernel. On the test
suite + external on x86_64 (and on a run on armv7s) it showed no impact on
either performance or compile time.
radar://15024459
llvm-svn: 192537
1) If the width of vectorization list candidate is bigger than vector reg width, we will break it down to fit the vector reg.
2) We do not vectorize the width which is not power of two.
The performance result shows it will help some spec benchmarks. mesa improved 6.97% and ammp improved 1.54%.
llvm-svn: 189830
using GEPs. Previously, it used a number of different heuristics for
analyzing the GEPs. Several of these were conservatively correct, but
failed to fall back to SCEV even when SCEV might have given a reasonable
answer. One was simply incorrect in how it was formulated.
There was good code already to recursively evaluate the constant offsets
in GEPs, look through pointer casts, etc. I gathered this into a form
code like the SLP code can use in a previous commit, which allows all of
this code to become quite simple.
There is some performance (compile time) concern here at first glance as
we're directly attempting to walk both pointers constant GEP chains.
However, a couple of thoughts:
1) The very common cases where there is a dynamic pointer, and a second
pointer at a constant offset (usually a stride) from it, this code
will actually not do any unnecessary work.
2) InstCombine and other passes work very hard to collapse constant
GEPs, so it will be rare that we iterate here for a long time.
That said, if there remain performance problems here, there are some
obvious things that can improve the situation immensely. Doing
a vectorizer-pass-wide memoizer for each individual layer of pointer
values, their base values, and the constant offset is likely to be able
to completely remove redundant work and strictly limit the scaling of
the work to scrape these GEPs. Since this optimization was not done on
the prior version (which would still benefit from it), I've not done it
here. But if folks have benchmarks that slow down it should be straight
forward for them to add.
I've added a test case, but I'm not really confident of the amount of
testing done for different access patterns, strides, and pointer
manipulation.
llvm-svn: 189007
To support this we have to insert 'extractelement' instructions to pick the right lane.
We had this functionality before but I removed it when we moved to the multi-block design because it was too complicated.
llvm-svn: 185230
