I'd reverted this in 6c7805d5d1 after a bad stage. Original commit
messsage follows:
[NFC][RemoveDIs] Bulk update utilities to insert with iterators
As part of the RemoveDIs project we need LLVM to insert instructions using
iterators wherever possible, so that the iterators can carry a bit of
debug-info. This commit implements some of that by updating the contents of
llvm/lib/Transforms/Utils to always use iterator-versions of instruction
constructors.
There are two general flavours of update:
* Almost all call-sites just call getIterator on an instruction
* Several make use of an existing iterator (scenarios where the code is
actually significant for debug-info)
The underlying logic is that any call to getFirstInsertionPt or similar
APIs that identify the start of a block need to have that iterator passed
directly to the insertion function, without being converted to a bare
Instruction pointer along the way.
I've also switched DemotePHIToStack to take an optional iterator: it needs
to take an iterator, and having a no-insert-location behaviour appears to
be important. The constructors for ICmpInst and FCmpInst have been updated
too. They're the only instructions that take block _references_ rather than
pointers for certain calls, and a future patch is going to make use of
default-null block insertion locations.
All of this should be NFC.
As part of the RemoveDIs project we need LLVM to insert instructions using
iterators wherever possible, so that the iterators can carry a bit of
debug-info. This commit implements some of that by updating the contents of
llvm/lib/Transforms/Utils to always use iterator-versions of instruction
constructors.
There are two general flavours of update:
* Almost all call-sites just call getIterator on an instruction
* Several make use of an existing iterator (scenarios where the code is
actually significant for debug-info)
The underlying logic is that any call to getFirstInsertionPt or similar
APIs that identify the start of a block need to have that iterator passed
directly to the insertion function, without being converted to a bare
Instruction pointer along the way.
I've also switched DemotePHIToStack to take an optional iterator: it needs
to take an iterator, and having a no-insert-location behaviour appears to
be important. The constructors for ICmpInst and FCmpInst have been updated
too. They're the only instructions that take block _references_ rather than
pointers for certain calls, and a future patch is going to make use of
default-null block insertion locations.
All of this should be NFC.
The last use was removed by:
commit e9f14d49458b492a3d993328da7db9ff14c44f9f
Author: Kazu Hirata <kazu@google.com>
Date: Mon May 29 11:56:52 2023 -0700
This patch migrates uses of StringRef::{starts,ends}with_insensitive
to StringRef::{starts,ends}_with_insensitive so that we can use names
similar to those used in std::string_view. I'm planning to deprecate
StringRef::{starts,ends}with_insensitive once the migration is
complete across the code base.
Differential Revision: https://reviews.llvm.org/D150426
-enable-new-pm is no longer necessary except for bugpoint. Make the name more clunky so it hopefully won't be used.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D146103
PassManagerBuilder is dead, long live PassBuilder!
bugpoint's -O# are now useless (and probably have been for a while given the number of passes we've removed from PassManagerBuilder). Perhaps they'll be revived if bugpoint ever works with the new PM.
Reviewed By: nikic, MaskRay
Differential Revision: https://reviews.llvm.org/D145835
The forwarding header is left in place because of its use in
`polly/lib/External/isl/interface/extract_interface.cc`, but I have
added a GCC warning about the fact it is deprecated, because it is used
in `isl` from where it is included by Polly.
This is a fairly large changeset, but it can be broken into a few
pieces:
- `llvm/Support/*TargetParser*` are all moved from the LLVM Support
component into a new LLVM Component called "TargetParser". This
potentially enables using tablegen to maintain this information, as
is shown in https://reviews.llvm.org/D137517. This cannot currently
be done, as llvm-tblgen relies on LLVM's Support component.
- This also moves two files from Support which use and depend on
information in the TargetParser:
- `llvm/Support/Host.{h,cpp}` which contains functions for inspecting
the current Host machine for info about it, primarily to support
getting the host triple, but also for `-mcpu=native` support in e.g.
Clang. This is fairly tightly intertwined with the information in
`X86TargetParser.h`, so keeping them in the same component makes
sense.
- `llvm/ADT/Triple.h` and `llvm/Support/Triple.cpp`, which contains
the target triple parser and representation. This is very intertwined
with the Arm target parser, because the arm architecture version
appears in canonical triples on arm platforms.
- I moved the relevant unittests to their own directory.
And so, we end up with a single component that has all the information
about the following, which to me seems like a unified component:
- Triples that LLVM Knows about
- Architecture names and CPUs that LLVM knows about
- CPU detection logic for LLVM
Given this, I have also moved `RISCVISAInfo.h` into this component, as
it seems to me to be part of that same set of functionality.
If you get link errors in your components after this patch, you likely
need to add TargetParser into LLVM_LINK_COMPONENTS in CMake.
Differential Revision: https://reviews.llvm.org/D137838
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
As part of legacy PM optimization pipeline removal.
This shouldn't be used in codegen pipelines so it should be ok to remove.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D137116
This doesn't touch objc-arc-contract because that's in the codegen pipeline.
However, this does move its corresponding initialize function into initializeCodegen().
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D135041
Replacing the following instances of UndefValue with PoisonValue, where the UndefValue is used as an arbitrary value:
- llvm/lib/CodeGen/WinEHPrepare.cpp
`demotePHIsOnFunclets`: RAUW arbitrary value for lingering uses of removed PHI nodes
- llvm/lib/Transforms/Utils/BasicBlockUtils.cpp
`FoldSingleEntryPHINodes`: Removes a self-referential single entry phi node.
- llvm/lib/Transforms/Utils/CallGraphUpdater.cpp
`finalize`: Remove all references to removed functions.
- llvm/lib/Transforms/Utils/ScalarEvolutionExpander.cpp
`cleanup`: the result is not used then the inserted instructions are removed.
- llvm/tools/bugpoint/CrashDebugger.cpp
`TestInts`: the program is cloned and instructions are removed to narrow down source of crash.
Differential Revision: https://reviews.llvm.org/D133640
Using the legacy PM for the optimization pipeline was deprecated in 13.0.0.
Following recent changes to remove non-core features of the legacy
PM/optimization pipeline, remove the (Thin)LTO pipelines.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D123882
Alias.getAliaseeObject() shouldn't be null, do use dyn_cast instead of dyn_cast_or_null
Also, remove redundant `else if (!F)` test - that is always true at the point in the if-else chain
These were added to prevent functions from being removed by WPO.
But that doesn't make sense, correct WPO will not remove functions we actually use.
I noticed these because compiling cc1_main.cpp was pulling in random LLVM pass headers.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D112971
To better reflect the meaning of the now-disambiguated {GlobalValue,
GlobalAlias}::getBaseObject after breaking off GlobalIFunc::getResolverFunction
(D109792), the function is renamed to getAliaseeObject.
There was an alias between 'simplifycfg' and 'simplify-cfg' in the
PassRegistry. That was the original reason for this patch, which
effectively removes the alias.
This patch also replaces all occurrances of 'simplify-cfg'
by 'simplifycfg'. Reason for choosing that form for the name is
that it matches the DEBUG_TYPE for the pass, and the legacy PM name
and also how it is spelled out in other passes such as
'loop-simplifycfg', and in other options such as
'simplifycfg-merge-cond-stores'.
I for some reason the name should be changed to 'simplify-cfg' in
the future, then I think such a renaming should be more widely done
and not only impacting the PassRegistry.
Reviewed By: aeubanks
Differential Revision: https://reviews.llvm.org/D105627
This is a mechanical change. This actually also renames the
similarly named methods in the SmallString class, however these
methods don't seem to be used outside of the llvm subproject, so
this doesn't break building of the rest of the monorepo.
No longer rely on an external tool to build the llvm component layout.
Instead, leverage the existing `add_llvm_componentlibrary` cmake function and
introduce `add_llvm_component_group` to accurately describe component behavior.
These function store extra properties in the created targets. These properties
are processed once all components are defined to resolve library dependencies
and produce the header expected by llvm-config.
Differential Revision: https://reviews.llvm.org/D90848
Bugpoint has lots of assumptions and hacks around the legacy PM, put off migrating it to NPM until later.
Fixes tests under BugPoint under NPM.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D87655
