This is the major rename patch that prior patches have built towards.
The DPValue class is being renamed to DbgVariableRecord, which reflects
the updated terminology for the "final" implementation of the RemoveDI
feature. This is a pure string substitution + clang-format patch. The
only manual component of this patch was determining where to perform
these string substitutions: `DPValue` and `DPV` are almost exclusively
used for DbgRecords, *except* for:
- llvm/lib/target, where 'DP' is used to mean double-precision, and so
appears as part of .td files and in variable names. NB: There is a
single existing use of `DPValue` here that refers to debug info, which
I've manually updated.
- llvm/tools/gold, where 'LDPV' is used as a prefix for symbol
visibility enums.
Outside of these places, I've applied several basic string
substitutions, with the intent that they only affect DbgRecord-related
identifiers; I've checked them as I went through to verify this, with
reasonable confidence that there are no unintended changes that slipped
through the cracks. The substitutions applied are all case-sensitive,
and are applied in the order shown:
```
DPValue -> DbgVariableRecord
DPVal -> DbgVarRec
DPV -> DVR
```
Following the previous rename patches, it should be the case that there
are no instances of any of these strings that are meant to refer to the
general case of DbgRecords, or anything other than the DPValue class.
The idea behind this patch is therefore that pure string substitution is
correct in all cases as long as these assumptions hold.
As part of the effort to rename the DbgRecord classes, this patch
renames the widely-used functions that operate on DbgRecords but refer
to DbgValues or DPValues in their names to refer to DbgRecords instead;
all such functions are defined in one of `BasicBlock.h`,
`Instruction.h`, and `DebugProgramInstruction.h`.
This patch explicitly does not change the names of any comments or
variables, except for where they use the exact name of one of the
renamed functions. The reason for this is reviewability; this patch can
be trivially examined to determine that the only changes are direct
string substitutions and any results from clang-format responding to the
changed line lengths. Future patches will cover renaming variables and
comments, and then renaming the classes themselves.
Patch 1 of 3 to add llvm.dbg.label support to the RemoveDIs project. The
patch stack adds a new base class
-> 1. Add DbgRecord base class for DPValue and the not-yet-added
DPLabel class.
2. Add the DPLabel class.
3. Enable dbg.label conversion and add support to passes.
Patches 1 and 2 are NFC.
In the near future we also will rename DPValue to DbgVariableRecord and
DPLabel to DbgLabelRecord, at which point we'll overhaul the function
names too. The name DPLabel keeps things consistent for now.
This patch extends findDbgValue and friends to optionally fill out a vector
of DPValue pointers, containing DPValues that refer to the sought Value.
This will allow us to incrementally add instrumentation to other
optimisation passes one-at-a-time, while un-instrumented passes will not
(yet) update DPValues.
Unit tests to check this behaves in the same way as dbg.values.
This enabled opaque pointers by default in LLVM. The effect of this
is twofold:
* If IR that contains *neither* explicit ptr nor %T* types is passed
to tools, we will now use opaque pointer mode, unless
-opaque-pointers=0 has been explicitly passed.
* Users of LLVM as a library will now default to opaque pointers.
It is possible to opt-out by calling setOpaquePointers(false) on
LLVMContext.
A cmake option to toggle this default will not be provided. Frontends
or other tools that want to (temporarily) keep using typed pointers
should disable opaque pointers via LLVMContext.
Differential Revision: https://reviews.llvm.org/D126689
Currently the max alignment representable is 1GB, see D108661.
Setting the align of an object to 4GB is desirable in some cases to make sure the lower 32 bits are clear which can be used for some optimizations, e.g. https://crbug.com/1016945.
This uses an extra bit in instructions that carry an alignment. We can store 15 bits of "free" information, and with this change some instructions (e.g. AtomicCmpXchgInst) use 14 bits.
We can increase the max alignment representable above 4GB (up to 2^62) since we're only using 33 of the 64 values, but I've just limited it to 4GB for now.
The one place we have to update the bitcode format is for the alloca instruction. It stores its alignment into 5 bits of a 32 bit bitfield. I've added another field which is 8 bits and should be future proof for a while. For backward compatibility, we check if the old field has a value and use that, otherwise use the new field.
Updating clang's max allowed alignment will come in a future patch.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D110451
Currently the max alignment representable is 1GB, see D108661.
Setting the align of an object to 4GB is desirable in some cases to make sure the lower 32 bits are clear which can be used for some optimizations, e.g. https://crbug.com/1016945.
This uses an extra bit in instructions that carry an alignment. We can store 15 bits of "free" information, and with this change some instructions (e.g. AtomicCmpXchgInst) use 14 bits.
We can increase the max alignment representable above 4GB (up to 2^62) since we're only using 33 of the 64 values, but I've just limited it to 4GB for now.
The one place we have to update the bitcode format is for the alloca instruction. It stores its alignment into 5 bits of a 32 bit bitfield. I've added another field which is 8 bits and should be future proof for a while. For backward compatibility, we check if the old field has a value and use that, otherwise use the new field.
Updating clang's max allowed alignment will come in a future patch.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D110451
Currently the max alignment representable is 1GB, see D108661.
Setting the align of an object to 4GB is desirable in some cases to make sure the lower 32 bits are clear which can be used for some optimizations, e.g. https://crbug.com/1016945.
This uses an extra bit in instructions that carry an alignment. We can store 15 bits of "free" information, and with this change some instructions (e.g. AtomicCmpXchgInst) use 14 bits.
We can increase the max alignment representable above 4GB (up to 2^62) since we're only using 33 of the 64 values, but I've just limited it to 4GB for now.
The one place we have to update the bitcode format is for the alloca instruction. It stores its alignment into 5 bits of a 32 bit bitfield. I've added another field which is 8 bits and should be future proof for a while. For backward compatibility, we check if the old field has a value and use that, otherwise use the new field.
Updating clang's max allowed alignment will come in a future patch.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D110451
In LLVM IR, `AlignmentBitfieldElementT` is 5-bit wide
But that means that the maximal alignment exponent is `(1<<5)-2`,
which is `30`, not `29`. And indeed, alignment of `1073741824`
roundtrips IR serialization-deserialization.
While this doesn't seem all that important, this doubles
the maximal supported alignment from 512MiB to 1GiB,
and there's actually one noticeable use-case for that;
On X86, the huge pages can have sizes of 2MiB and 1GiB (!).
So while this doesn't add support for truly huge alignments,
which i think we can easily-ish do if wanted, i think this adds
zero-cost support for a not-trivially-dismissable case.
I don't believe we need any upgrade infrastructure,
and since we don't explicitly record the IR version,
we don't need to bump one either.
As @craig.topper speculates in D108661#2963519,
this might be an artificial limit imposed by the original implementation
of the `getAlignment()` functions.
Differential Revision: https://reviews.llvm.org/D108661
Value::replaceUsesOutsideBlock doesn't replace debug uses which leads to an
unnecessary reduction in variable location coverage. Fix this, add a unittest for
it, and add a regression test demonstrating the change through instcombine's
replacedSelectWithOperand.
Reviewed By: djtodoro
Differential Revision: https://reviews.llvm.org/D99169
Value::replaceUsesOutsideBlock doesn't replace debug uses which leads to an
unnecessary reduction in variable location coverage. Fix this, add a unittest for
it, and add a regression test demonstrating the change through instcombine's
replacedSelectWithOperand.
Reviewed By: djtodoro
Differential Revision: https://reviews.llvm.org/D99169
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Value::printAsOperand has been scanning the entire module just to
print a single value as an operand, regardless being asked to print a
type or not at all, and regardless really needing to scan the module
to print a type.
It made some of the users of the method exceptionally slow on large
IR-modules (or large MIR-files with large IR-modules embedded).
This patch defers scanning a module looking for struct types, mostly
numbered struct types, as much as possible, speeding up those users
w/o changing any APIs at all.
See speedup examples below:
Release Build:
# 83 seconds -> 5.5 seconds
time ./bin/llc -start-before=irtranslator -stop-after=irtranslator \
-global-isel -global-isel-abort=2 -simplify-mir sqlite3.O0.ll -o \
sqlite3.O0.ll.regbankselected.mir
# 133 seconds -> 6.2 seconds
time ./bin/opt sqlite3.O0.ll -dot-cfg -disable-output
Release + Asserts Build:
# 95 seconds -> 5.5 seconds
time ./bin/llc -start-before=irtranslator -stop-after=irtranslator \
-global-isel -global-isel-abort=2 -simplify-mir sqlite3.O0.ll -o \
sqlite3.O0.ll.regbankselected.mir
# 146 seconds -> 6.2 seconds
time ./bin/opt sqlite3.O0.ll -dot-cfg -disable-output
# 1096 seconds -> 553 seconds
time ./bin/llc -debug-only=isel -fast-isel=false -stop-after=isel \
sqlite3.O0.ll -o /dev/null 2> err
where sqlite3.O0.ll is non-optimized IR produced from
sqlite-amalgamation (http://sqlite.org/download.html), which is entire
SQLite3 implementation in a single C-file.
Benchmarked on 4-cores / 8 threads PCI-E SSD iMac running macOS
Reviewers: dexonsmith, bkramer, void, chandlerc, aditya_nandakumar, dsanders, qcolombet,
Reviewed By: bogner
Subscribers: thegameg, llvm-commits
Differential Revision: https://reviews.llvm.org/D44132
llvm-svn: 328246
clang-format (https://reviews.llvm.org/D33932) to keep primary headers
at the top and handle new utility headers like 'gmock' consistently with
other utility headers.
No other change was made. I did no manual edits, all of this is
clang-format.
This should allow other changes to have more clear and focused diffs,
and is especially motivated by moving some headers into more focused
libraries.
llvm-svn: 304786
Users often call getArgumentList().size(), which is a linear way to get
the number of function arguments. arg_size(), on the other hand, is
constant time.
In general, the fact that arguments are stored in an iplist is an
implementation detail, so I've removed it from the Function interface
and moved all other users to the argument container APIs (arg_begin(),
arg_end(), args(), arg_size()).
Reviewed By: chandlerc
Differential Revision: https://reviews.llvm.org/D31052
llvm-svn: 298010
At the same time, fixes InstructionsTest::CastInst unittest: yes
you can leave the IR in an invalid state and exit when you don't
destroy the context (like the global one), no longer now.
This is the first part of http://reviews.llvm.org/D19094
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 266379
This commit publicly exposes the method 'getLocalSlot' in the
'ModuleSlotTracker' class.
This change is useful for MIR serialization, to serialize the unnamed basic
block and unnamed alloca references.
Reviewers: Duncan P. N. Exon Smith
llvm-svn: 243336
Allow callers of `Value::print()` and `Metadata::print()` to pass in a
`ModuleSlotTracker`. This allows them to pay only once for calculating
module-level slots (such as Metadata).
This is related to PR23865, where there was a huge cost for
`MachineFunction::print()`. Although I don't have a *particular* user
in mind for this new code, I have hit big slowdowns before when running
`opt -debug`, and I think this will be useful. Going forward, if
someone hits a big slowdown with `print()` statements, they can create a
`ModuleSlotTracker` and send it through. Similarly, adding support to
`Value::dump()` and `Metadata::dump()` should be trivial.
I added unit tests to be sure the `print()` functions actually behave
the same way with and without the slot tracker.
llvm-svn: 240867
* Use StringRef instead of std::string&
* Return a std::unique_ptr<Module> instead of taking an optional module to write
to (was not really used).
* Use current comment style.
* Use current naming convention.
llvm-svn: 215989
This compiles with no changes to clang/lld/lldb with MSVC and includes
overloads to various functions which are used by those projects and llvm
which have OwningPtr's as parameters. This should allow out of tree
projects some time to move. There are also no changes to libs/Target,
which should help out of tree targets have time to move, if necessary.
llvm-svn: 203083
are part of the core IR library in order to support dumping and other
basic functionality.
Rename the 'Assembly' include directory to 'AsmParser' to match the
library name and the only functionality left their -- printing has been
in the core IR library for quite some time.
Update all of the #includes to match.
All of this started because I wanted to have the layering in good shape
before I started adding support for printing LLVM IR using the new pass
infrastructure, and commandline support for the new pass infrastructure.
llvm-svn: 198688
