This patch "modernizes" the LLVM `insertvalue` and `extractvalue`
operations to use DenseI64ArrayAttr, since they only require an array of
indices and previously there was confusion about whether to use i32 or
i64 arrays, and to use assembly format.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D131537
This is to improve consistency within the SPIR-V dialect and make these ops a bit shorter.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D130280
This is to improve the consistency within the SPIR-V dialect and to make op names a bit shorter.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D130194
Precursor: https://reviews.llvm.org/D110200
Removed redundant ops from the standard dialect that were moved to the
`arith` or `math` dialects.
Renamed all instances of operations in the codebase and in tests.
Reviewed By: rriddle, jpienaar
Differential Revision: https://reviews.llvm.org/D110797
This allows us to remove the `spv.mlir.endmodule` op and
all the code associated with it.
Along the way, tightened the APIs for `spv.module` a bit
by removing some aliases. Now we use `getRegion` to get
the only region, and `getBody` to get the region's only
block.
Reviewed By: mravishankar, hanchung
Differential Revision: https://reviews.llvm.org/D103265
This is the fourth and final patch in a series of patches fixing markdown links and references inside the mlir documentation. This patch combined with the other three should fix almost every broken link on mlir.llvm.org as far as I can tell.
This patch in particular addresses all Markdown files in the top level docs directory.
Differential Revision: https://reviews.llvm.org/D103032
Fix inconsistent MLIR CMake variable names. Consistently name them as
MLIR_ENABLE_<feature>.
Eg: MLIR_CUDA_RUNNER_ENABLED -> MLIR_ENABLE_CUDA_RUNNER
MLIR follows (or has mostly followed) the convention of naming
cmake enabling variables in the from MLIR_ENABLE_... etc. Using a
convention here is easy and also important for convenience. A counter
pattern was started with variables named MLIR_..._ENABLED. This led to a
sequence of related counter patterns: MLIR_CUDA_RUNNER_ENABLED,
MLIR_ROCM_RUNNER_ENABLED, etc.. From a naming standpoint, the imperative
form is more meaningful. Additional discussion at:
https://llvm.discourse.group/t/mlir-cmake-enable-variable-naming-convention/3520
Switch all inconsistent ones to the ENABLE form. Keep the couple of old
mappings needed until buildbot config is migrated.
Differential Revision: https://reviews.llvm.org/D102976
To unify the naming scheme across all ops in the SPIR-V dialect, we are
moving from spv.camelCase to spv.CamelCase everywhere. For ops that
don't have a SPIR-V spec counterpart, we use spv.mlir.snake_case.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D98014
To unify the naming scheme across all ops in the SPIR-V dialect,
we are moving from spv.camelCase to spv.CamelCase everywhere.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D97918
To unify the naming scheme across all ops in the SPIR-V dialect, we are
moving from spv.camelCase to spv.CamelCase everywhere.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D97919
To unify the naming scheme across all ops in the SPIR-V dialect, we are
moving from `spv.camelCase` to `spv.CamelCase` everywhere.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D97917
To unify the naming scheme across all ops in the SPIR-V dialect, we are
moving from spv.camelCase to spv.CamelCase everywhere.
Differential Revision: https://reviews.llvm.org/D97920
Continue the convergence between LLVM dialect and built-in types by using the
built-in vector type whenever possible, that is for fixed vectors of built-in
integers and built-in floats. LLVM dialect vector type is still in use for
pointers, less frequent floating point types that do not have a built-in
equivalent, and scalable vectors. However, the top-level `LLVMVectorType` class
has been removed in favor of free functions capable of inspecting both built-in
and LLVM dialect vector types: `LLVM::getVectorElementType`,
`LLVM::getNumVectorElements` and `LLVM::getFixedVectorType`. Additional work is
necessary to design an implemented the extensions to built-in types so as to
remove the `LLVMFixedVectorType` entirely.
Note that the default output format for the built-in vectors does not have
whitespace around the `x` separator, e.g., `vector<4xf32>` as opposed to the
LLVM dialect vector type format that does, e.g., `!llvm.vec<4 x fp128>`. This
required changing the FileCheck patterns in several tests.
Reviewed By: mehdi_amini, silvas
Differential Revision: https://reviews.llvm.org/D94405
Continue the convergence between LLVM dialect and built-in types by replacing
the bfloat, half, float and double LLVM dialect types with their built-in
counterparts. At the API level, this is a direct replacement. At the syntax
level, we change the keywords to `bf16`, `f16`, `f32` and `f64`, respectively,
to be compatible with the built-in type syntax. The old keywords can still be
parsed but produce a deprecation warning and will be eventually removed.
Depends On D94178
Reviewed By: mehdi_amini, silvas, antiagainst
Differential Revision: https://reviews.llvm.org/D94179
The LLVM dialect type system has been closed until now, i.e. did not support
types from other dialects inside containers. While this has had obvious
benefits of deriving from a common base class, it has led to some simple types
being almost identical with the built-in types, namely integer and floating
point types. This in turn has led to a lot of larger-scale complexity: simple
types must still be converted, numerous operations that correspond to LLVM IR
intrinsics are replicated to produce versions operating on either LLVM dialect
or built-in types leading to quasi-duplicate dialects, lowering to the LLVM
dialect is essentially required to be one-shot because of type conversion, etc.
In this light, it is reasonable to trade off some local complexity in the
internal implementation of LLVM dialect types for removing larger-scale system
complexity. Previous commits to the LLVM dialect type system have adapted the
API to support types from other dialects.
Replace LLVMIntegerType with the built-in IntegerType plus additional checks
that such types are signless (these are isolated in a utility function that
replaced `isa<LLVMType>` and in the parser). Temporarily keep the possibility
to parse `!llvm.i32` as a synonym for `i32`, but add a deprecation notice.
Reviewed By: mehdi_amini, silvas, antiagainst
Differential Revision: https://reviews.llvm.org/D94178
This patch adds documentation for the `mlir-spirv-cpu-runner`.
It provides an overview of applied transformations and passes, as
well as an example walk-through.
Some typos in the documentation have been fixed as well.
Reviewed By: mravishankar
Differential Revision: https://reviews.llvm.org/D93620
This patch addresses two issues:
1. Not supported ops are updated to pick up the changes in the
SPIR-V dialect.
2. Conversion on `spv.ExecutionMode` is updated.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D91881
This commit does the renaming mentioned in the title in order to bring
'spv' dialect closer to the MLIR naming conventions.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D91792
This commit does the renaming mentioned in the title in order to bring
'spv' dialect closer to the MLIR naming conventions.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D91797
This commit does the renaming mentioned in the title in order to bring
'spv' dialect closer to the MLIR naming conventions.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D91715
This commit does the renaming mentioned in the title in order to bring
`spv` dialect closer to the MLIR naming conventions.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D91609
This patch updates the type conversion section of the documentation.
It includes the modelling of array strides and the mapping of the
naturally padded structs.
Reviewed By: mravishankar
Differential Revision: https://reviews.llvm.org/D86674
This patch updates the SPIR-V to LLVM conversion manual.
Particularly, the following sections are added:
- `spv.EntryPoint`/`spv.ExecutionMode` handling
- Mapping for `spv.AccessChain`
- Change in allowed storage classes for `spv.globalVariable`
- Change of the runner section name
Reviewed By: mravishankar
Differential Revision: https://reviews.llvm.org/D86288
Updated the documentation with new MLIR LLVM types for
vectors, pointers, arrays and structs. Also, changed remaining
tabs to spaces.
Reviewed By: ftynse
Differential Revision: https://reviews.llvm.org/D85277
Updated the documentation for SPIR-V to LLVM conversion, particularly:
- Added a section on control flow
- Added a section on memory ops
- Added a section on GLSL ops
Also, moved `spv.FunctionCall` to control flow section. Added a new section
that will be used to describe the modelling of runtime-related ops.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D84734
This patch adds documentation for SPIR-V to LLVM conversion. It describes
the approaches taken and what is currently supported by this conversion
framework.
Reviewed By: antiagainst
Differential Revision: https://reviews.llvm.org/D83322
